Winegard TV Antenna AP 8275 User Manual

Other mount options:  
DS-2000  
SW-0012  
SW-0012  
RECEPTION - INSTALLATION - SAFETY GUIDE  
UNIVERSAL PIPE/TOWER MOUNT  
GABLE END MOUNT  
Quick and economical mount for  
adding compact off-air  
antennas to satellite  
For mounting  
TV antenna  
to roof gable  
with TB-0005.  
TB-0005  
Congratulations...  
DS-2000  
onbuyingaWinegardantenna! Asapioneerinthetelevisionantennaindustry,  
Winegard Company is a proven leader with over 55 years of experience.  
Having over 80 patents to date and many awards for our antennas, you  
can be confident you are getting a top quality antenna that is designed,  
tested and built in the U.S.A.  
system. Two 2” U-bolts  
included, adaptable to different pole  
installations. Use without U-bolts  
for attic and wall installations. 22”  
pipe E-coated for maximum weather  
protection.  
Adjustable 48” to 60”.  
TB-0005  
5 FT SWEDGED MAST  
18 gauge galvanized  
steel masting for use  
with SW-0012,  
DS-3000  
“J” PIPE MOUNT  
SW-0010 & CM-2012.  
Designed for outdoor antennas, use on side of house or roof; mount  
foot can be used on either end of pipe for best mounting. Pipe  
galvanized steel, 38 inches long, wall thickness .060 inches, 1.66”  
OD, E-Coated for maximum protection. (Note: Not designed for large  
antennas.)  
DS-3000  
Other products that you may want with your antenna system:  
PRE-AMPLIFIERS:  
HDP-269  
AP-8700  
AP-8275  
1 TV or Over 75’ cable run  
4 TVs or Over 75’ cable run  
8 TVs or Over 75’ cable run  
Digital Television Facts  
Your Winegard antenna is digital and HD ready. This means that the  
antenna receives all available digital and HD local programming in your  
area.*  
75 OHM COAX:  
FM ANTENNAS:  
CX-0605 - 5’ RG6  
CX-0612 - 12’ RG6  
CX-0625 - 25’ RG6  
CX-0650 - 50’ RG6  
CX-6100 - 100’ RG6  
HD-6010 0-25 MILE RANGE  
HD-6000 0-40 MILE RANGE  
HD6055P 0-50 MILE RANGE  
A commonly unknown but key feature with over-the-air (OTA) antennas  
is they deliver the highest quality digital and HD signals to your televi-  
sion – even better than satellite and cable! With the signal being received  
directly from the broadcast tower and transmitted to your television, it is  
uncompressed and in the purest form.  
SPLITTERS:  
SP-1002 2 WAY (5-1000MHz)  
SP-2052 2 WAY (40-2050MHz)  
SP-1004 4 WAY (5-1000MHz)  
SP-2054 2 WAY (40-2050MHz)  
As more and more local networks are broadcasting their programs in HD,  
you can experience reception of your favorite shows in crisp, clear FREE  
HD! You also have the ability to receive local and ethnic programming  
that cable and satellite companies may not provide. It doesn’t get any  
better than that!  
*Antenna reception may vary based on transmitting antenna tower height, lobal pattern of  
the transmitter, height of the receiving antenna, weather conditions and terrain on receiving  
path including trees, buildings, hills, mountains, etc.  
Printed in U.S.A.  
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000 • 800-288-8094  
© Winegard Company 2010 1451009  
1
 
Example of Antenna Grounding as per  
National Electrical Code  
Using Preamplifiers and Distribution Amplifiers  
Amplifiersdonotincreasetheantenna’ssignal. Amplifierscanovercome  
any cable and splitter loss to improve signal strength at the tuner. They help  
get the signal to the tuner in installations with multiple TVs or long cable  
runs in weak signal areas. Long cable runs result in 50% loss of signal for  
every 100 ft of RG6.  
1. Mountthe75ohmgroundingblockordischargeunitascloseaspossible  
to where the downlead enters the house.  
2. The ground wires for both the mast and the downlead should be copper  
or aluminum wire, number eight (8) or larger.  
Avoid using preamps and amplifiers in urban areas, as the strong signal in  
these areas may be overdriven by additional amplification.  
3. The downlead wire from the antenna to the antenna grounding block or  
discharge unit and the mast ground wire should be secured to the house  
with stand-off insulators, spaced from four (4) to six (6) feet apart.  
Cable Selection  
RG6 is now the industry standard for coaxial cable. The greatest advantage  
to using this cable over the traditional RG59 is a bit less cable loss. RG6  
is rated at -6dB loss per 100’ run, while RG59 is rated at -8dB loss for the  
same run. This could be a consideration if cable loss is a factor in your  
installation.  
NOTE: In the case of a “ground up” antenna installation, it may not be  
necessary to ground the mast if the mast extends four or more feet into  
the ground. Consult your local code or a licensed electrician for the proper  
depth in your location.  
Antennas are often returned that are in perfect working order. Be sure  
to check all connectors for proper installation and fit, or for corrosion on  
existing installations and perform a channel scan anytime you have a  
reception problem.  
Example of antenna grounding as per  
National Electrical Code, ANSI/NFPA 70  
Antenna Lead  
In Wire  
Antenna Mast  
Troubleshooting Ideas  
• Rotate and Rescan. Many signal problems can be solved by re-aiming  
your antenna.  
• If the antenna is indoors, try a different location and rescan.  
• Check coax for corrosion and shorts.  
Ground  
Clamp  
• If you are having trouble receiving signal, try a direct connection from the  
antenna to the tuner with a new coax cable.  
• Run a new channel scan once each month to find new channels that  
are added to your area or if you have moved the antenna.  
• Check the knowledge base http://www.winegard.com/kbase/index.php  
• Call Winegard, 1-800-788-4417  
Electric  
Service  
Equipment  
A
75 ohm coax  
Grounding Block  
(NEC Section 810-21)  
Grounding Conductor  
(NEC Art 250, Part H)  
Ground  
Clamps  
Power Service Grounding  
Electrode System  
(NEC Art 250, Part H)  
NEC - National Electrical Code  
3
6
 
Follow These Rules and Live  
DANGER!  
1. Perform as much antenna assembly on the ground as possible.  
3. Do not use a metal ladder.  
4. Remember, even the slightest touch of the antenna to a power  
line can cause a fatal shock.  
INSTALLATION OF THIS PRODUCT NEAR POWER LINES  
IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE  
INSTALLATION DIRECTIONS.  
IMPORTANT SAFETY RULES  
5. Don’t try to install the antenna on a windy day.  
6. Have a spotter when you are on the roof; they can see things you may  
miss.  
7. If you start to drop the antenna, let it go. You could lose your balance  
and fall also.  
8. If any part of the antenna comes into contact with a power line - CALL  
YOUR POWER COMPANY! DO NOT ATTEMPT TO REMOVE IT  
YOURSELF! They will remove it for you.  
Location of your Antenna  
Before attempting to install your antenna, decide on the best  
location to install your antenna for both safety and performance.  
To determine a safe distance from wires, power lines and trees:  
1. Measure the length of your antenna and multiply by 2.  
2. Add this measurement to the length of your tower/mast.  
9. Mast, downlead and guy wires are conductors. Keep them away from  
power lines also.  
If you are unable to maintain this safe distance, STOP!  
10. Make sure the antenna mast assembly and downlead are grounded  
per National Electrical Code. See page 7.  
Most antennas are supported by tripod masts or pipe masts attached to the  
chimney, roof, or to the side of the house. Generally, the higher the antenna,  
the better it performs. Good practice is to install your antenna about 5 to 10  
feet above the roof line, away from power lines and other obstructions.  
For mast support, use only 1-1/4” OD pipe or larger antenna mast sections.  
Lengths over 10 feet should be guyed at least every 10 foot section.  
Before Installing Your Antenna  
If you are not sure that you can install the antenna safely, DO NOT  
TRY IT! Contact a professional installer.  
If you cannot find a professional installer in your area, call Winegard  
Technical Services at 800-788-4417 or use the dealer locator at:  
WINEGARD PROMISE:  
To provide a high quality antenna and to help you receive the  
best reception for your geographic location.  
If you have any questions or are not completely satisfied,  
please contact us:  
NOTE: If antenna is mounted in either of these  
two locations, the safest distance from power  
lines should be twice the length of the antenna  
plus the length of the mast.  
Phone: 1-800-788-4417  
Do not return the antenna to your dealer.  
est  
cation  
5
4
 
WINEGARD PROMISE:  
To provide a high quality antenna and to help you receive the best  
reception for your geographic location.  
If you have any questions or are not completely satisfied,  
please contact us:  
Phone: 1-800-788-4417  
Do not return the antenna to your dealer.  
 

Weslo Treadmill WLTL62790 User Manual
Whirlpool Dishwasher DP940PWS User Manual
Whirlpool Refrigerator WSF26C2EXB User Manual
Whistler Radar Detector XTR 265 User Manual
Wolfgang Puck Kitchen Grill WPJP0020C User Manual
Wolf Refrigerator FRR 108 User Manual
Xantrex Technology Yard Vacuum 975 0057 01 01 User Manual
Xerox Projector DP 820 User Manual
XM Satellite Radio Satellite Radio TRK SR2 User Manual
Zanussi Freezer ZCF37C User Manual