Notebook DriveDock™ v4
USER’S MANUAL
Revised May 21, 2007
Features
• Dual, daisy-chainable FireWire ports
• USB 2.0 mini port
• Bus powered through FireWire, plus two options for
external power
• LEDs show when unit is receiving power as well as
power output status
• Host-detection LEDs indicate connection to either
FireWire or USB host
Installation Instructions
1. Check the accessories packaged with your Notebook DriveDock. Please contact WiebeTech if any items are
missing or damaged. The box should contain:
NBDDv4
NBDD8v4
Notebook DriveDock unit
FireWire 800 cable
1
1
Notebook DriveDock unit
FireWire 400 cable
1
1
Hard drive screws
Rubber bumpers
4
6
Hard drive screws
Rubber bumpers
4
6
Manual and Warranty information
(on CD)
Manual and Warranty information
(on CD)
2. Take a moment to familiarize yourself with the parts of your new Notebook DriveDock. This will aid you in
the remaining steps. (FireWire 400 ports will be FireWire 800 ports on NBDD8v4)
A +12V power input from optional AC
LEDs:
adapter
a +12V DC power input is present
b Unit is connected to USB host
c Hard drive access
B DC input for 4-pin power connector
C USB 2.0 mini port
D Dual FireWire Ports
d Unit is connected to FireWire host
e 4-pin power input is present
f +5V Power output to drive
E Power switch (On / Off)
Notebook DriveDock v4 User Manual
- 1 -
WiebeTech LLC
Usage with Macintosh Computers
Compatibility
The Notebook DriveDock v4 is fully plug-and-play under Mac OS X. No drivers are needed. The USB 2.0 port is
USB 1.1 compatible.
Mounting and Ejecting Volumes
If the hard drive attached to the DriveDock is already formatted, an icon representing the drive’s
volume will appear (mount) on the desktop. You can begin using the volume right away. If the drive
is unformatted, a message will appear on the desktop saying that the disk is unreadable. You can
use OS X’s Disk Utility to easily format the drive.
Eject the volume before powering down the unit by dragging the volume’s icon to the trash bin, or by
selecting the volume then pressing Command-E.
Booting from your DriveDock
Some Macs support booting from a FireWire device. To activate this feature, you must first install OS X on the
external volume. The easiest way to do this is to clone an existing system drive using a utility such as Carbon Copy
Cloner or Super Duper. Next, go to System Preferences Æ Startup Disk. A window will list the available bootable
volumes. Select the volume from which you wish to boot. Another method is to hold down the Option key during
boot up. A screen should appear that allows you to select the volume you wish to use. This is useful if you wish to
boot from your dock only some of the time.
Usage with Windows Operating System
Compatibility
The Notebook DriveDock v4 is fully plug-and-play with Windows XP and Vista. No drivers are needed on these
operating systems. On systems running Windows 98SE or ME, the dock is plug-and-play through FireWire. The
USB2 port is USB 1.1 compatible.
Mounting and Ejecting Volumes
If the hard drive attached to the dock is already formatted, you can begin using the volume right away. When the
dock and drive are properly connected and turned on, a window may open to allow you
access to the volume. If no window appears, you can find the volume by double-clicking the
“My Computer” icon.
(Windows XP, Vista)
Eject the volume before powering down the unit by single-clicking the green arrow icon on the task bar, then selecting
“Safely remove….” Windows will indicate when it is safe to disconnect the dock.
Shutting down the unit without first ejecting the volume can result in data loss.
(Windows ME, 2000)
Notebook DriveDock v4 User Manual
- 3 -
WiebeTech LLC
Technical Specifications
Product Codes
Interface
NBDDv4, NBDD8v4
• FireWire 400 (NBDDv4) or 800 (NBDD8v4) using OXFW911
• USB 2.0 (backwards compatible with USB 1.1)
100-240VAC +12V / 3A (not included—WiebeTech Part # PWR-3)
(+12V): +12V DC Jack
Optional Power Supply
Power Input
(+12V / +5V): Standard disk drive 4-pin Molex power jack
Power Output
Power Switch
Host Indicators
+5V at 0.75A
On / Off
• FireWire host attached LED
• USB host attached LED
Access Indicator
Operating Temperature
Operating Humidity
Bus Powering
Provides visual indication of hard drive activity
50 – 85° Fahrenheit (10 – 30° Celsius)
5% to 95%, noncondensing
Converts FireWire bus power to +5V
2.5” PATA/ATAPI drives
Compatibility
Operating System
• Windows XP
• Mac OS X
• Linux distributions that support FireWire
Shipping Weight
Dimensions
2 pounds (including accessories)
3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)
Dimensions are exclusive of attached plates, drives, and cables.
1-year limited warranty. See warranty statement for details and limitations. WiebeTech
offers free phone support for 90 days after purchase (1-866-744-8722). After 90 days,
Warranty
Notebook DriveDock is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
2)
3)
Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.
Use a FireWire cable with RFI reducing ferrites on each end.
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact [email protected] for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact [email protected]. We
appreciate being able to serve you!
Notebook DriveDock v4 User Manual
- 4 -
|