Gas Dryer
PRODUCT MODEL NUMBERS
WGD9050X, WGD9150W, WGD9151X, WGD9250W,
WGD9270X, WGD9051Y, WGD9151Y, WGD9371Y
DRYER DIMENSIONS
Front view:
Door open view:
Side view:
29"
27"
(686 mm)
481/8"
(736 mm)
(1238 mm)
471/8"
(1197 mm)
Left or
right side
exhaust
353/8"
(899 mm)
31/2"
(89 mm)
15
/8"
(41 mm)
1"
(25 mm)
67
/8"
(174 mm)
Back view:
Closet Installation (stacked washer and dryer):
Closet installation (dryer only):
61/4"
(159 mm)
6"
(152 mm)
3"
(76 mm)
3"
Electric
34" recommended
(864 mm)
(76 mm)
48 in.2
48 in.2
(310 cm2)
(310 cm2)
71"
18" min.
(457 mm)
(1803 mm)
281/8"
(715 mm)
24 in.2
24 in.2
51/2"
31/2"
(89 mm)
(155 cm2)
(155 cm2)
(140 mm)
3"
(76 mm)
4"
3"
(76 mm)
(102 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
14"
(358 mm)
Cabinet installation (dryer only):
Spacing for recessed area or closet
installation
All dimensions show recommended spacing
allowed, with tested spacing of 0" (0 mm)
clearance on sides and rear.
NOTE: Most installations require a minimum
5" (102 mm) clearance behind the dryer for
the exhaust vent with elbow. See “Venting
Requirements”.
7"
(178 mm)
■
■
■
Additional spacing should be considered
for ease of installation and servicing.
Additional clearances might be required
for wall, door, and floor moldings.
18"
(460 mm)
Custom under counter installation (dryer only):
Additional spacing should be considered
on all sides of the dryer to reduce noise
transfer.
39" min.
(990 mm)
■
For closet installation, with a door,
minimum ventilation openings in the top
and bottom of the door are required.
Louvered doors with equivalent
ventilitation openings are acceptable.
1"
(25 mm)
4"
(102 mm)
■
■
Companion appliance spacing should
also be considered.
1"
(25 mm)
No other fuel-burning appliance may be
installed in the same
closet as the dryer.
1"
(25 mm)
NOTE: Some models not recommended for
undercounter installation.
1"
(25 mm)
W10443045B
02/2012
|