Westinghouse Flat Panel Television TX 42F970Z User Manual

USER’S MANUAL  
MANUEL DE LUTILISATEUR  
MANUAL DEL USUARIO  
TX-42F970Z  
 
TABLE OF CONTENT  
DIGITALTELEVISIONTRANSITION NOTICE.......................................1  
FORYOUR SAFETY........................................................................................2  
PRECAUTIONS AND REMINDERS ...........................................................3  
IMPORTANT SAFETY INSTRUCTIONS...................................................4  
PACKAGE CONTENTS.................................................................................5  
PREPARATION.................................................................................................6  
ATTACHINGTHE BASE.........................................................................................................6  
PREPARINGYOUR LCD HDTV FORWALL MOUNTING..........................................6  
PERIPHERAL CONNECTION GUIDE......................................................8  
OPERATING INSTRUCTIONS....................................................................9  
TO USETHE FRONT PANEL CONTROL.........................................................................9  
TO USETHE REMOTE CONTROL.................................................................................. 10  
TO USETHE MENUS ........................................................................................................... 11  
CHANNEL MENU ................................................................................................................ 11  
VIDEO MENU........................................................................................................................ 11  
AUDIO MENU....................................................................................................................... 12  
FEATURE MENU.................................................................................................................... 12  
VGA MENU............................................................................................................................. 14  
TIPS........................................................................................................................................... 15  
PRODUCT SPECIFICATION......................................................................16  
BEFORE CALLING SERVICE......................................................................17  
GLOSSARY......................................................................................................18  
 
DIGITALTELEVISIONTRANSITION NOTICE  
This device contains a digital television tuner, so it should receive digital over the airTV programming,  
with a suitable antenna, after the end of full-power analogTV broadcasting in the United States on June  
12 2009. Some older television receivers, if they rely on aTV antenna, will need aTV Converter to  
receive over the air digital programming, but should continue to work as before for other purposes (e.g.,  
for watching low-powerTV stations still broadcasting in analog, watching pre-recorded movies, or playing  
video games).  
For more information,  
call the FCC at 1-888-CALL-FCC (1-888-225-5322)  
or see www.DTV.gov.  
For information on theTV Converter program, and on government coupons that may be used toward  
or call the NTIA at 1-888-DTV-2009  
.
AVISO RELATIVO A LATRANSICIÓN ATELEVISIÓN DIGITAL  
Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación  
digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia  
de la televisión analógica en los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión  
antiguos, si dependen de una antena deTV, necesitarán un conversor deTV para recibir por el aire una  
programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver  
emisoras deTV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o  
para utilizar sus videojuegos).  
Para obtener más información,  
llame FCC 1-888-CALL-FCC (1-888-225-5322)  
o refiérase a www.DTV.gov.  
Para toda información sobre el programa de conversores deTV, y acerca de los cupones del gobierno  
o llame al NTIA al 1-888-DTV-2009  
SYMBOL  
SYMBOL DEFINITION  
DANGEROUSVOLTAGE:The lightning flash with arrowhead  
symbol, within an equilateral triangle, is intended to alert the user to  
the presence of uninsulated “dangerous voltage” within the product’s  
enclosure that may be of sufficient magnitude to constitute a risk of  
electrical shock to persons.  
SA 1965  
INSTRUCTIONS:The exclamation point within on  
equilateral triangle to alert the user to the presence of  
important operating and maintenance (servicing)  
instruction in the literature accompanying the appliance.  
SA 1966  
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, Such as  
vases, shall be placed on the apparatus.  
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or  
equivalent type.  
Batteries installed warning  
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or  
equivalent type.  
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
1
 
FORYOUR SAFETY  
Before operating theTV please read this manual thoroughly.This manual should be retained for future  
reference.  
FCC Class B Radio Frequency Interference Statement  
WARNING:  
(FOR FCC CERTIFIED MODELS)  
This equipment has been tested and found to comply with the limits for a Class B digital  
NOTE:  
device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.This equipment generates, uses and  
can radiate radio frequency energy, and if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV technician for help.  
4.  
NOTICE  
1. The changes or modifications not expressly approved by the party responsible for compliance could  
void the user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the  
emission limits.  
3. The manufacturer is not responsible for any radio orTV interference caused by unauthorized  
modification to this equipment. It is the responsibilities of the user to correct such interference.  
WARNING:  
To prevent fire or shock hazard, do not expose theTV to rain or moisture. Dangerously high voltages  
are present inside theTV. Do not open the cabinet. Refer servicing to qualified personnel only.  
SAFETY: Lamp Disposal  
Hg  
LAMP(S) INSIDETHIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR  
DISPOSED OF ACCORDINGTO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION,  
CONTACTTHE ELECTRONIC INDUSTRIES ALLIANCE ATWWW.EIAE.ORG.  
2
 
PRECAUTIONS AND REMINDERS  
Place unit on even surfaces.  
Unplug immediately if other  
foreign materials are put  
insideTV box or if theTV  
fell down.  
Do not cover or block  
any vents and openings.  
Inadequate ventilation  
may shorten the life of  
the display unit and cause  
overheating.  
Unplug immediately if is  
malfunction like no picture,  
no video/audio,smoke and  
bad odor fromTV.  
Prohibit/Avoid openingTV  
cabinet.  
Avoid direct sunlight, dusty,  
high humidity and smoky  
areas  
.
Don't throw any object  
inside theTV box like  
metals or other flammable  
materials.  
Call service personnel to  
clean the internal part of  
theTV once a year.  
Remember to unplug the  
AC cord from the AC outlet  
before cleaning. Do not use  
liquid cleaners or aerosol  
cleaners to clean the display.  
Do not place the display  
near water, such as bathtub,  
washbasin, kitchen sink  
laundry tub, swimming pool  
or in a damp basement.  
Don't place theTV in  
confined spaces or in a box  
when using it.  
Make sure to unplug the  
unit when not in use for a  
long period of time (days).  
Notice for Remote Controller  
Avoid Dropping  
Avoid Liquids  
Avoid Aerosol Cleaners  
3
 
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding type plug.A polarized plug has two  
blades with one wider than the other.A grounding type plug has two blades and third grounding  
prong.The wide blade or third prong is provided for your safety.When the provided plug does not  
fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
15. TheTV should be operated only from the type of power source indicated on the label. If you are  
not sure of the type of power supplied to your home, consult your dealer or local power company.  
16. Class I Protective Earthing Connection – "The Class I apparatus shall be connected to a mains socket  
outlet with a protective earthing connection."  
17. Disconnect Device - Mains Plug or Appliance Coupler – "The mains plug or appliance coupler is  
used as the disconnect device, the disconnect device shall remain readily operable."  
18. Disconnect Device - An all-pole MAINS SWITCH – "An all-pole MAINS SWITCH is used as the  
disconnect device, the switch shall remain readily operable."  
19. Service Instructions – "CAUTION These servicing instructions are for use by qualified service  
personnel only.To reduce the risk of electric shock, do not perform any servicing other than that  
contained in the operating instructions unless you are qualified to do so."  
20. Wall Mount BracketWording – "For use only with UL ListedWall Mount Bracket with minimum  
weight/load: Please see page.24"  
21. Information about the DTV transition –after June 12,2009, a television receiver with only an analog  
broadcast tuner will require a converter box to receive full power overthe- air broadcasts with  
an antenna because of the Nation's transition to digital broadcasting.Analog-onlyTVs should  
continue to work as before to receiver low power, Class A or translator television stations and with  
cable and satelliteTV services, gaming consoles,VCRs, DVD players, and similar products. For more  
information about the DTV transition is available from http://www.DTV.gov or 1-888-CALL-FCC,  
and from http://www.dtv2009.cov or 1-888-DTV-2009 for information about subsidized coupons  
4
 
for digital-to-analog converter boxes.  
CONSUMER ALERT This television receiver has only an analog broadcast tuner and will require  
a concerter box after June 12,2009,to receive over-the-air broadcasts with an antenna because of  
the Nation's transition to digital broadcasting.Analog-onlyTVs should continue to work as before  
with cable and satelliteTV services, gaming consoles,VCRs, DVD players, and similar products, For  
more information, call the Federal Communications Commission at 1-888-225-5322(TTY:1-888-  
835-5322)or visit the Commission's digital television website at:www.DTV.gov.  
22. Tilt/Stability – All televisions must comply with recommended international global safety  
standards for tilt and stability properties of its cabinets design.  
Do not compromise these design standards by applying excessive pull force to the front, or top,  
of the cabinet, which could ultimately overturn the product  
Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top  
of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product  
damage and/or personal injury.  
23. Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
24. Power Lines – An outdoor antenna should be located away from power lines.  
25. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the  
antenna system is grounded so as to provide some protection against voltage surges and built  
up static charges. Section 810 of the National Electric Code,ANSI/NFPA No. 70-1984, provides  
information with respect to proper grounding of the mats and supporting structure grounding of the  
lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antennadischarge  
unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure  
below.  
ANTENNA  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
ELECTRIC SERVICE EQUIPMENT  
GROUND CLAMPS  
GROUNDING CONDUCTORS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the  
CATV system installer:This reminder is provided to call the CATV system installer’s attention to  
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the 6 English grounding system of the building, as close  
to the point of cable entry as practical. Please, make sure to connect the power plug to the wall  
outlet socket after connecting theTV to the adapter!  
26. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as  
vases, shall be placed on the apparatus.  
5
 
PREPARATION  
IMPORTANT: Do not apply pressure to the screen display area which may compromise the  
integrity of the display. The manufacturer’s warranty does not cover user abuse or improper  
installations.  
ATTACHINGTHE BASE  
IMPORTANT:The Base of the HDTV must be assembled prior to usage.  
1. PlaceTV unit face down on a soft and flat surface  
(blanket, foam, cloth, etc.) to prevent any damage to  
the HDTV.  
2. Carefully align and insert the Base to the stand.  
3. Insert the screws to the bottom of the base and  
tighten the base to the stand.  
PREPARINGYOUR LCD HDTV FORWALL  
MOUNTING  
We suggest that you keep yourTV at least 2.56 inches (65 mm) from the wall to prevent cable  
interference.  
Before mounting yourTV on the wall, you need to remove the base.  
For your safety, please use only with UL listed wall mount bracket with minimum weight of the  
TV without stand. (Please see page.16.)  
To attach a wall mount bracket to yourTV:  
1 Loosen the screws on the back of the stand and remove the back cover of the stand.  
2 Pull up the stand base from the hinge to remove the stand base from yourTV.  
3 Secure the wall mount bracket to the back of yourTV using four M6 screws, as indicated  
in the illustration.  
400 mm  
200 mm  
NOTE  
400mmx200mm wall mount bracket & M6 screws are not included.  
After taking the base apart, users must attach the two screw lockers (marked the picture)  
to machine, in order to prevent gap after hanging on the wall.  
6
 
Please make sure to connect the power plug  
to the wall outlet socket after connecting the  
TV to the power cord!  
3. Remote control:  
Remove the cover of the battery  
compartment. Insert the 2 batteries  
supplied (Type AAA 1.5V).  
1. Install the base stand; place theTV  
on a solid surface.  
Min  
1 m  
Ensure that theTV is placed in a position  
to allow free flow of air. Do not cover the  
ventilation openings on the back cover.  
To prevent any unsafe situations, no naked  
flame sources, such as lighted candles,  
should be placed on or in the vicinity.  
Avoid heat, direct sunlight and exposure  
to rain or water.The equipment shall not  
be exposed to dripping or splashing.  
4. Power:  
Insert the power cord in the wall socket  
with AC power supply.You can see LED  
states at the front panel. If the LED color  
Blue  
is  
, means theTV set is power on. If  
the LED color is Red, which means thisTV  
set is in standby state.  
2. Connect the antenna cable or CATV cable  
to the aerial socket ANT IN 75 at the  
back of theTV set.  
Ω
5. Turn theTV on:  
Press the POWER key on the Remote  
control or the side panel control knobs.  
TheTV will be turned on in a minute with  
display on the screen.  
Power Key  
Power  
Video Comp PC/HDMI TV  
7
 
PERIPHERAL CONNECTION GUIDE  
AC POWER  
1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or  
set top box through this all digital connector.The white color band on the rear of theTV  
indicates this connection.  
2. PC IN – Connect the video and audio cables from a computer here.  
3. AV IN (AV/S-VIDEO) – Connect the input source for composite video devices, such as a  
VCR or video game. Use the white and red connectors to connect the external audio from  
the same source.The signal being carried by the S-Video cable and connector, if connected,  
will take priority over theVideo RCA connector (yellow connector).  
4. COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for  
component video devices such as a DVD Player or set top box here. From left to right, use  
red for Pr, blue for Pb, green forY, red for right audio (R) and white for left audio (L) inputs.  
5. ANTENNA/CABLE DIGITAL/ANALOG – Connect to an antenna or digital cable (out-  
of-the-wall, not from Cable Box) for DigitalTV.*  
6. SPDIF (Optical Digital Audio Out) When a digital audio signal is associated with the  
input selected for viewing, the digital audio will be available on this SPDIF connection to  
your home theater system.  
7. AUDIO OUT – Connect an external sound system with standard audio cable to the  
AUDIO OUT L and R jacks on the back of yourTV and to the AUDIO IN jacks on the  
amplifier.  
Once your equipment is connected, use the following procedure to view the input signal:  
Press the source button on the remote controller to select the relevant source to view. (ex: Press  
COMP button to select “Component” if you have connected a video recorder to Component socket.)  
8
 
OPERATING INSTRUCTIONS  
TO USETHE FRONT PANEL CONTROL  
1
2
3
4
5
6
7
1
VOL +  
VOL +: Press to increase the sound volume level.  
VOL - : Press to decrease the sound volume level.  
CH +: Press to select the next higher Program number.  
CH - : Press to select the next lower Program number.  
2. VOL -  
3. CH  
4. CH  
5. MENU  
6. INPUT  
Menu key: Press to open or exit the OSD (on-screen display) menu.  
Source key: Press to select the input source.  
Power key: Press to turn on / off (standby) theTV set. (Press to turn on  
Blue  
color and  
7.  
TV after the power on status, LED had changed to the  
stopped flashing.)  
i
POWER  
9
 
TO USETHE REMOTE CONTROL  
MTS/SAP  
POWER  
Press to activate the NTSCTV  
sounds, such as: Stereo, SAP or  
Mono tone, and languages of  
DTV.  
Press to power ON/OFF  
(standby)TV.(Note:1.TV is  
never completely power off.  
unless physically unplugged.  
2.Press to turn onTV after  
the power on status, LED had  
changed to the blue color and  
stopped flashing.)  
Power  
Video Comp PC/HDMI TV  
Press to choose the display  
aspect as: Normal,Wide, Zoom  
or Cinema mode.  
1
4
7
2
5
8
0
3
VIDEO  
Press repeatedly to choose  
AV1/AV2 source mode.  
SOURCE  
6
9
Press repeatedly to choose the  
various input sources (Video 1  
~ 6).  
COMP  
PREV CH  
EPG  
This function is not supported.  
Press repeatedly to choose  
Component 1/Component 2  
source mode.  
Sleep Freeze MTS/SAP  
Fav Source EPG  
MUTE  
Switch the sound ON/OFF  
PC/HDMI  
Press repeatedly to chooseVGA  
or HDMI source mode (HDMI1,  
2, 3, 4).  
DISPLAY  
Press to show the information  
about the input source,TV  
channel,display resolution and  
current time.  
Mute  
TV  
Press to choose ATSC/NTSC  
TV source mode.  
CH  
VOL  
Info  
VOL- /VOL+  
Press + or - to adjust the  
volume.  
0 ~ 9 /- number  
Menu  
Exit  
Press to enterTV channel  
number to select channel (Press  
‘-’ to choose the sub-channel).  
EXIT  
Press to exit menu or OSD.  
SLEEP  
V-CHIP  
ENTER  
Press to set a time period (off/5  
min /10 min /15 min /30min/45  
min /60min/90min/120 min  
/180 min /240 min)after which  
theTV should switch itself to  
standby mode.  
Press to lock / unlock Parental  
Control temporarily. (After  
setting the restricted table of  
MPAA orTV Rating.)  
VIDEO ADJ  
Press to choose theVivid/  
Standard/PWR/Theater/Sport/  
Custom.  
V-Chip Video Adj Audio Adj  
C.C.  
FREEZE  
Press to freeze the displayed  
picture.  
AUDIO ADJ  
Press to choose Standard/Movie/  
News/Custom.  
RMT-51  
CH-/ CH +  
Press + or - to browse through  
theTV channels.  
CC  
Press repeatedly to change  
the closed caption type as CC  
ON/CC OFF/CC ONWHEN  
MUTE.  
MENU  
Press to open or exit menu.  
“<”,“>”,“ ”,“ ”,“ENTER  
Press to adjust the various  
function items on the menu.  
FAVORITE  
Press to toggle the Favorite/  
Normal mode.  
PREV CH  
Press to display the previous  
channel  
10  
 
7. FAV Channel Setting: Show the Favorite  
Channel List. User can edit (add/delete) the  
favorite channels.  
TO USETHE MENUS  
1. Press the MENU/EXIT button to display  
or close the main menu  
VIDEO MENU  
2. Use the Navigation Ring to move around  
to select, adjust or confirm an item in the  
OSD (On Screen Display) menu.  
TheVideo menu in most source modes shows  
as below. It provides several video adjustment  
items for user fine tuning the video display.  
Only inVGA source mode, theVideo menu  
simply provides Brightness, Contrast,  
Backlight, ColorTemp,Aspect Ratio and  
Preset items.  
Press the MENU/EXIT button to enter the  
main OSD.Adjust the items including Video  
menu,Audio menu, Feature menu,  
Channel menu andVGA menu. However,  
some function items in the menus may only be  
enabled in the particular source modes.  
Video  
Video  
Vivid  
Picture Mode  
Brightness  
Contrast  
Sharpness  
Color  
CHANNEL MENU  
42  
41  
Audio  
The Channel menu inTV mode shows as  
below.  
Feature  
Channel  
VGA  
+10  
62  
0
Channel  
Tint  
Color Temp  
Cool  
Video  
Cable  
Tuning Band  
Channel Strength  
Auto CH Search  
Add on CH Search  
Channels List  
Audio  
Enter  
Exit  
Move  
Select  
Return  
Exit  
Feature  
Channel  
VGA  
1. Picture Mode: Adjust the best picture  
appearance from selecting the preset value  
of Vivid, Standard, PWR, Theater, Sport, or  
Custom.  
Channel Labels  
FAV Channel Setting  
Enter  
Exit  
Move  
Select  
Return  
Exit  
2. Brightness: Video brightness adjustment,  
the tuning range is 0 ~ 100.  
1. Tuning Band: SelectTV source signal  
from the Air (antenna) or Cable (CATV).  
3. Contrast: Video contrast adjustment, the  
tuning range is 0 ~ 100.  
4. Sharpness: Video sharpness adjustment,  
the tuning range is 0 ~ 100.  
2. Channel Strength: Show the intensity of  
the received DTV signal.  
5. Color: Video color chroma adjustment,  
the tuning range is 0 ~ 100.  
3. Auto CH Search: Automatically scan  
all NTSC / ATSCTV channels and then  
store in the channel table. In channel scan  
process, the OSD can display the number  
of channels which had been found.  
6. Tint: Video tint adjustment, the tuning  
range is R50 ~ G50.  
7. ColorTemp:Three color temperature  
modes. (Normal /Warm / Cool)  
4. Add on CH search: Add channels which  
are new found.  
8. Backlight: Backlight strength adjustment,  
the tuning range is 0 ~ 30.  
9. Aspect Ratio: Choose the display aspect:  
Fill/Overscan.  
Standard/  
10. Preset: Restore the default video settings.  
5. Channels List: Show the channel List.  
User can edit (add/delete) the channel  
numbers.  
6. Channel Labels: Show the NTSC / ATSC  
TV channel label menu for user modifying  
channel labels specifically.  
11  
 
10. Preset: Restore the default audio settings.  
AUDIO MENU  
The Audio menu inTV mode shows as below.  
It provides audio adjustment for user to modify  
the audio setting.Audio language setting is only  
available with ATSCTV source, the option is  
disable under other source modes.  
FEATURE MENU  
The Feature menu inTV mode shows as below.  
This menu gives users the most flexibilities to  
satisfy their generally demands.According to  
the various requirements in different source  
modes, certain features should be hidden  
(disable) on the menu.The details footnotes  
will be described clearly below.  
Audio  
Video  
Movie  
Sound Mode  
Bass  
30  
30  
0
Audio  
Treble  
Feature  
Channel  
VGA  
Feature  
Balance  
Audio Source  
SPDIF  
Video  
Mono  
RAW  
On  
English  
Menu Language  
Time  
Audio  
Speaker  
Advanced Video  
Transparency  
Feature  
Channel  
VGA  
0
Enter  
Exit  
Move  
Select  
Return  
Exit  
Password Setting  
Parental Control  
Closed Captions Display  
1. Sound Mode: Choose the sound mode:  
Standard, Movie, News, or Custom.  
Off  
Enter  
Exit  
Move  
Select  
Return  
Exit  
2. Bass: Bass tone adjustment, the tuning  
range is 0 ~ 63. (The default state is  
enabled)  
1. Menu Language: Select the menu display  
language. (English / Français / Español)  
3. Treble:Treble tone adjustment, the tuning  
range is 0 ~ 63. (The default state is  
enabled)  
2. Time: Set current time.The sub-menu  
includesTime Mode,Time Zone and  
Daylight Savings.  
4. Balance: Audio balance adjustment, the  
tuning range is L50 ~ R50.  
[Time Mode] – Choose from Auto or  
Manual.  
5. Audio Source: Select the audio source  
from Mono, Stereo, or SAP. (This function  
works in ATV only).  
[Time Zone] – Set current time zone.  
[Daylight Savings] – Set to On or Off.  
Time Set  
6. Audio Language: Change the audio  
language setting on ATSCTV programs.The  
number of the supported audio languages  
depends on the ATSCTV programs. (English  
/ Français / Español)  
Video  
Auto  
HST  
Off  
Time Mode  
Time Zone  
Daylight Savings  
Year  
Audio  
Feature  
Channel  
VGA  
2007  
Jan  
Month  
7. SPDIF: Digital audio output format. Select  
from RAW and PCM.  
1
Day  
4:32 PM  
Time  
8. Speaker: Choose to turn on / off theTV  
internal speaker.The digital audio output  
signals and earphone output signals will not  
be turned off even though theTV speaker  
is off.The default setting is On.  
Enter  
Exit  
Move  
Select  
Return  
Exit  
3. AdvancedVideo: Provide the Noise  
Reduction,Adaptive Contrast, and DCR for  
enhancing video quality.  
9. AVL: Choose On or off to adjust volume  
to be consistent across programs and  
channels automatically.  
[Noise Reduction] – Gives four NR  
effect degrees, such as: Low, Mid, High and  
Off.The default setting is Mid.  
12  
 
[Adaptive Contrast] – Choose On or  
off to adjust the gamma after analyzing the  
input signal automatically.  
signals can be un-lock through pressing  
theV-CHIP key on the remote control  
and then key in the correct password.  
Note:This feature is only available inTV,  
Composite and S-Video source modes.  
(The default password is: 0 0 0 0.)  
[DCR] – Dynamic Contrast Ratio (DCR)  
auto adjusts the backlight of the screen.  
[SMP] – SMP means "Smart Motion Plus",  
gives four motion effect degrees, such as:  
Low, Mid, High and Off.The default setting  
is Mid.  
Enter Password  
[Preset] – Restore the default advanced  
video option settings.  
Parental Control  
Video  
4. Transparency: Adjust the transparency of  
the on-screen menu from range 1 to 10.  
Off  
Off  
Button Lock  
Block Unrated TV  
USA Parental Locks  
Canadian Parental Locks  
Open V-Chip  
Audio  
5. Password Set: Change the 4-numeral  
parental control password.Three steps are  
required for changing the password: Enter  
Old Password -> Enter New Password ->  
Confirm New Password. Note:This item is  
only available inTV, Composite and S-Video  
Feature  
Channel  
VGA  
Enter  
Exit  
Move  
Select  
Return  
Exit  
source modes.The default password is  
0 0 0 .  
0
[Button Lock] – Select On or Off to  
lock or unlock the control buttons on the  
side panel of theTV.When this function  
enables, the control buttons on yourTV  
will be locked andTV will be controlled by  
remote control only.  
Enter Old Password  
Enter New Password  
Confirm New Password  
[Block UnratedTV] When Block  
UnratedTV is set to on, yourTV will block  
unrated program.  
[USA Parental Locks] – Set the parental  
control level by MPAA orTV Rating.  
[Canadian Parental Locks] – Set the  
parental control level by English Rating or  
French Rating.  
[OpenV-Chip] – OpenV-Chip is an  
advancedV-Chip rating system for digital  
channels that are received.  
6. Parental Control: provide the parental  
Control (V-chip) function setting. Before  
entering the Parental Control sub-menu,  
The rating table will be updated by  
downloading the RRT5 data for blocking.  
user has to key in the password first. Enter  
the Parental Lock item, then the user can  
modify the restricted table about MPAA or  
TV Rating respectively.While exiting the  
sub-menu, the parental control function is  
working.The inhibitive channels or source  
7. Closed Captions Display: Select a closed  
caption options. (Off / On / OnWith Mute)  
8. Analog Captions: Select an analog caption  
options. (CC 1-4 /TEXT 1-4)  
13  
 
9. Digital Captions: Select a digital caption  
options. (Service 1-6)  
[Preset] – Restore the default component  
setting values.  
10.Digital Captions Setup: Provide  
numerous options for setting the digital  
closed caption style in the sub-menu.  
13.Reset to Default: Restore all the default  
settings.  
VGA MENU  
[Style] – Set to Automatic or Custom  
mode. If Custom mode is selected, user can  
modify the detail styles described below.The  
setting result will be shown immediately on  
the bottom of the sub-menu OSD. Note:  
This feature is only available in DigitalTV  
(ATSC) mode.  
This option only shows and is available inVGA  
mode, which provides several items for the  
VGA display fine tuning.  
1. H-Position: Adjust the horizontal position  
of the picture. (0-100)  
[Size] – Digital closed caption font size,  
which can be set as Automatic, Small,  
Normal or Large.  
2. V-Position: Adjust the vertical position of  
the picture. (0-100)  
3. Clock: Adjust picture clock to reduce  
Vertical-Line noise. (0-100)  
[Font] – Digital closed caption font style,  
which can be chosen as Automatic, Default  
or Font 1 ~ 7.  
4. Phase: Adjust Picture Phase to reduce  
Horizontal-Line noise. (0-100)  
[Text Color] – Automatic /White / Red  
/ Green / Blue /Yellow / Magenta / Cyan /  
Black  
5. Auto Adjust: Adjust the settings  
automatically.  
[Text Opacity] – Automatic / Solid /  
Flashing /Transparent /Translucent  
6. Preset: Restore the defaultVGA setting  
values.  
[Background Color] – Automatic /  
Black /White/ Red / Green / Blue/Yellow /  
Magenta / Cyan  
[Background Opacity] – Automatic /  
Solid / Flashing /Transparent /Translucent  
[Edge Effect] – Automatic / None / Raised  
/ Depressed / Uniform / Left Shadow / Right  
Shadow  
[Edge Color] – Automatic / Red / Green  
/ Blue /Yellow / Magenta / Cyan / Black /  
White.  
11.Input Labels: User can edit the input  
labels.  
12.Component Setting: This option only  
shows and is available in component mode,  
which provides fine tuning component  
display.  
[Phase] – Adjust Picture Phase to reduce  
Horizontal-Line noise.The tuning range is  
from 0 to 100.  
14  
 
Regulatory Notices – Federal  
TIPS  
Communications Commission Notice  
Care of the screen  
This equipment has been tested and found  
to comply with the limits for a Class B digital  
Do not rub or strike the screen with anything  
hard as this may scratch, mar, or damage the  
screen permanently.  
device, pursuant to part 15 of the FCC  
Rules.These limits are designed to provide  
reasonable protection against harmful  
Unplug the power cord before cleaning the  
screen. Dust theTV by wiping the screen  
and the cabinet with a soft, clean cloth. If the  
interference in a residential installation.  
This equipment generates, uses, and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is  
no guarantee that interference will not occur  
in a particular installation. If this equipment  
does cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user is  
encouraged to try to correct the interference  
by one or more of the following measures:  
screen requires additional cleaning, use a  
clean, damp cloth. Do not use liquid cleaners  
or aerosol cleaners.  
Mobile telephone warning  
To avoid disturbances in picture and sound,  
malfunctioning of yourTV or even damage  
to theTV, keep away your mobile telephone  
from theTV.  
Reorient or relocate the receiving  
antenna.  
Increase the separation between the  
equipment and theTV.  
Connect the equipment into wall power  
outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced  
radio or television technician for help.  
End of life directives  
We are paying a lot of attention to produce  
environmental friendly in green focal areas.  
Your new receiver contains materials, which  
can be recycled and reused.  
At the end of its life, specialized companies  
can dismantle the discarded receiver to  
concentrate the reusable materials and to  
minimize the amount of materials to be  
disposed of.  
Modifications –  
The FCC requires the user to be notified that  
any changes or modifications made to this  
device that are not expressly approved by  
our company may void the user’s authority to  
operate the equipment.  
Please ensure you dispose of your old  
receiver according to local regulations.  
Dolby License Notice andTrademark  
Acknowledgement  
Cables –  
Connections to this device must be made with  
shielded cables with metallic RF/EMI connector  
hoods to maintain compliance with FCC Rules  
and Regulations.  
Manufactured under license from Dolby  
Laboratories.  
Canadian notice –  
"Dolby" and the double-D symbol are  
trademarks of Dolby Laboratories  
This Class B digital apparatus meets all  
requirements of the Canadian Interference-  
Causing Equipment Regulations.  
Avis Canadian –  
Cat apparel numerous de la classed B  
respected toutes les exigencies du règlement  
sur le materiel brouilleur du Canada.  
15  
 
Component INPUT:  
Rear Component x2:  
PRODUCT SPECIFICATION  
Y: 1V(p-p), 75 ohm, including sync.  
Pr/Cr: ±0.35V(p-p), 75 ohm  
Pb/Cb: ±0.35V(p-p), 75 ohm  
AUDIO: 300mv(rms)  
NOTE  
* This model complies with the specifications  
listed below.  
Supported resolutions:1080p, 1080i, 720p, 480p,  
480i  
HDMITerminals:  
* Designs and specifications are subject to  
change without notice.  
HDMI INPUT: Rear HDMI x2; Side HDMI x2  
HDCP compliant  
E-EDID compliant  
* This model may not be compatible with  
features and/or specifications that may be  
added in the future.  
Supported scan rates: 1080p, 1080i, 720p, 480p,  
480i  
* 42” LCDTV (42” viewable)Viewable image  
size: 1067mm diagonal  
VGATerminals:  
VGA INPUT:  
Television System:  
NTSC standard  
ATSC standard (8-VSB, Clear-QAM)  
RearVGA (D-SUB 15 Pin) Input x1  
E-EDID compliant  
Channel Coverage:  
VHF: 2 through 13  
UHF: 14 through 69  
Supported scan rates:  
640X480 /60Hz  
800x600/60Hz  
CableTV: Mild band (A - 8 through A - 1,A  
through I )Super band (J throughW)Hyper  
band (AA through ZZ,AAA, BBB)Ultra band (65  
through 94, 100 through 125)  
1024X768 /60Hz  
1680X1050 /60Hz  
Recommended: 1920X1080 /60Hz  
Audio INPUT: Headphone Mini-jack for stereo  
(3.5Ø )  
Power Source:  
AC power supply: 100V~240V, 50/60 Hz  
Audio Out: SPDIF / RCA Jack (R/L)  
EnvironmentalTemperature: 5°C - 35°C  
Power Consumption  
250W  
1W in standby mode (power cord plugged in  
and power OFF)  
Dimensions:  
Include Stand:  
1009.5mm(W) x 688.0mm(H) x 262.2mm(L)  
Audio Power  
10W + 10W, Internal Speaker  
Weight:  
19.8kg (With Stand)  
17.8kg (w/o stand and base)  
Video/Audio Terminals:  
Rear AV x1: S-Video/Video/Audio Input  
Side AV x1: S-Video/Video/Audio Input  
Wall Mounting:  
400 x 200mm  
(Wall mount kit is not included)  
S-VIDEO INPUT:  
Y: 1V(p-p), 75 ohm, negative sync.  
C: 0.286V(p-p) (burst signal), 75 ohm  
Supplied Accessories:  
1pcs Power cord  
1pcs Remote control  
(with two size AAA alkaline batteries)  
1pcs User manual  
VIDEO/AUDIO INPUT:  
VIDEO: 1V(p-p), 75 ohm, negative sync.  
AUDIO: 300mv(rms)  
1pcs Setup Guide  
16  
 
BEFORE CALLING SERVICE  
Please make these simple checks before calling service.These tips may save you time and money  
since charges for receiver installation and adjustments of customer controls are not covered  
under your warranty.  
Symptoms  
Items to Check and Actions to follow  
“Ghost ” or double image  
*This may be caused by obstruction to the antenna  
due to high rise buildings or hills. Using a highly  
directional antenna may improve the picture.  
No power  
No picture  
*Check if theTV’s AC power cord is plugged into  
the mains socket.  
*Unplug theTV, wait for 60 seconds.Then reinsert  
plug into the mains socket and turn on theTV  
again.  
*Check antenna connections at the rear of theTV  
to see if it is properly connected to theTV.  
*Possible broadcast station trouble.  
Try another channel.  
*Adjust the contrast and brightness settings.  
*Check the Closed Captions control. SomeTEXT  
modes could block the screen.  
Good picture but no sound  
*Increase theVOLUME.  
*Check if theTV is muted; press the MUTE button  
on the remote control.  
Good sound but poor color  
Poor picture  
*Adjust the contrast, color and brightness settings.  
*Poor picture quality may occur when an activated  
S-VHS camera or camcorder is connected to  
yourTV and the other peripheral at the same  
time. Switch off one of the peripherals.  
Snowy picture and noise  
Horizontal dotted line  
*Check the antenna connection.  
*This may be caused by electrical interference (e.g.  
hairdryer, nearby neon lights, etc.)  
*Turn off the equipment.  
Television not responding to remote control  
*Check whether the batteries are working.  
Replace if necessary.  
*Clean the remote control sensor lens on theTV.  
*You can still use the buttons at the front of your  
TV.  
*Select theTV mode to ensure your remote  
control is set in theTV mode.  
17  
 
GLOSSARY  
Second Audio Program (SAP)  
HDTV  
Another or additional audio channel  
provided for in the MultichannelTelevision  
Sound (MTS) broadcast standard.A  
monaural soundtrack included within  
the recorded or video signal (usually  
containing a second language translation  
for the displayed program).  
HDTV displays are technically defined as  
being capable of displaying a minimum of  
720p or 1080i active scan lines.  
HDMI Inputs  
High-Definition Multimedia Interface  
Audio /Video Inputs  
SleepTimer  
Located on the rear of the receiver, these  
connectors (RCA phono type plug) are  
used for the input of audio and video  
signals. Designed for use withVCRs (or  
other accessories) in order to receive  
higher picture resolution and offer sound  
connection options.  
You can set a time period for which the  
TV will be turn off automatically.  
S-Video Input  
You can connect yourTV set to a high-  
resolution video source (such as Super  
VHS video-cassette recorder, Laser Disc  
player and DVD HomeTheater Set) in  
order to provide maximum consumer  
viewing satisfaction.  
Menu  
An on-screen listing of features shown on  
theTV screen is made available for user  
adjustments.  
MPAA  
Motion Picture Association of America  
MultichannelTelevision sound (MTS)  
The broadcasting standard, which allows  
stereo sounds to be transmitted with the  
TV picture.  
RF  
Radio Frequency or modulated signal  
design used as the carrier for television  
broadcasts.  
18  
 
19  
 

Weslo Home Gym QVRX10170 User Manual
Weslo Treadmill WATL272051 User Manual
Weslo Treadmill WLTL313120 User Manual
Westcott Camera Accessories 1881 User Manual
Westinghouse Coffee Grinder WST2006ZE User Manual
Westinghouse Microwave Oven WCM770B W User Manual
Windster Ventilation Hood A User Manual
Wolf Appliance Company Range DF484CG User Manual
Xantech Switch DCH4 User Manual
Zanussi Dishwasher ZT 617 User Manual