V I S I O N F I T N E S S
A s s e m b l y
G u i d e
M O D E L X 6 6 0 0 H R C E L L I P T I C A L T R A I N E R
TOOLS & HARDWARE INCLUDED
MM
MM
5
Allen Wrench
4
Allen Wrench
MM
5
L-Shaped Wrench
MM
Screwdriver
13 Wrench
BLUE BAG
MM
MM
20 L x 8 D Bolt
Quantity: 6
ORANGE BAG
MM
MM
55 L x 8 D Bolt
Quantity: 2
NyLock Nut
Quantity: 2
STEP
1
ORANGE BAG
STEP
1
• Slide the rubber cover onto the
console mast.
• Unfold the console cable and
attach it to the string located inside the
console mast. Guide the wire up
through the mast while simultaneously
sliding the console mast onto the
frame bracket.
• Bolt the mast to the frame using the
two bolts and two nuts; make sure
these are tight!
• Slide the rubber cover down over
the bolt heads.
STEP
2
STEP
2
RUBBER BOOT
• Install the rubber boot over the top
of the lower right handlebar and slide
to the bottom corner.
STEP
3
STEP
3
BLUE BAG
• Mount the lower right handlebar to
the frame tube using one of the bolts
in the bag.
4
STEP
4
STEP
4
BLUE BAG
• Mount the upper right handlebar to
the frame and lower portion of
handlebar using two of the bolts in the
bag.
STEP
5
RUBBER BOOT
STEP
5
• Install the rubber boot over the top
of the lower left handlebar and slide
to the bottom corner.
STEP
6
STEP
6
BLUE BAG
• Mount the lower left handlebar to
the frame tube using one of the bolts
in the bag.
5
STEP
7
STEP
7
BLUE BAG
• Mount the upper left handlebar to
the frame and lower portion of
handlebar using two of the bolts in the
bag.
STEP
8
CONSOLE
STEP
8
• Remove the four screws from the
back of the console. Plug the wire
connectors from inside the mast into
the console. The cable connectors
are slotted, so do not force the
connection!
• Mount the console to the mast using
the four screws. Do not pinch the
cable!
621-D East Lake Street
•
P.O. Box 280
•
Lake Mills. WI 53551
fax 1.920.648.3373
toll free 1.800.335.4348
•
phone 1.920.648.4090
•
1999 Vision Fitness. All Rights Reserved. 7.99
6
|