Visart Technologies Handheld TV 104 PORTABLE TV with built in multimedia Card Player User Manual

OPERATION INSTRUCTIONS  
10.4 PORTABLE TV with built-in multimedia Card Player  
 
Check List  
When you openthe box, makesure the followingcomponents are notmissing.  
1Portable TV (1)  
2TVStand (1)  
3Remote Control (1)  
4) AV Cable (1)  
5) CATV Cable (1)  
6Headphone (1)  
7Power Supply (1)  
8) Warranty Card (1)  
9) User Manual(1)  
If you haveany questions, pleasecontact the retailer.  
Introduction  
10.4 Portable TVsupports:  
JPEG picture file.  
WMA, MP3 soundfiles.  
MPEG1, MPEG2 videofiles.  
Background sound playing  
13 different pictureplaying Modes.  
CF, SM, MS, MSPRO, SD, MMC, IBM MICRODRIVE seventypes of memorycards.  
AV Input/Output  
TV  
Remote control support.  
Safety Precautions  
Please be awareof the followingprecautions.  
1.Handle itcarefully. Placemachine on asoft cloth orsurface before installationin order to  
prevent for scratches.  
2.Spray a littleof cleaner onsoft cloth andwipe the panel.  
3.Do not blockthe vent toprevent overheating.  
4.Never disassemble orperform self-maintenance andrepair, since opening or removing  
cover plate maycause high-voltage electricshock or otherdangers. Have aqualified  
technician perform allproduct maintenance.  
Installation Instructions  
3.1 SINGLE FRAME  
- 1 -  
 
1. Front ViewFig. 1:  
Remote Sensor  
Fig. 1  
2. Top ViewFig. 2:  
Fig. 2  
Two slotsfor CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE:7 types ofmemory  
cards supports.  
3. Back ViewFig. 3:  
Wall Hanging: can installonto the surfaceof a wall. Table Stand: use thestand to support  
the Portable TVfor weight support.  
Hanging Hole  
Stand  
Fig. 3  
Input/output IntroductionFig. 4:  
DC 12V  
Signal Switch  
AVConnector  
TV  
Fig. 4  
- 2 -  
 
lTV cable :Connect CATV cable orTV Antenna Cable toTV terminal.  
: Headphone Input(Sound export),can connect toheadphone.  
l
lAV input: Connectswith AV cable andmatch the cablewith the correctcolor input.  
lSignal switch: switchAUDIO andVIDEO signal input/output.  
lDC12V: Powerinputinstall the powercord into theDC12V input.  
4. Button InstructionsRight-hand sideFig. 5:  
Power  
MODE  
Add and Subtract  
MENU  
Fig. 5  
Instruction:  
lPower: on/off switch.  
lMODE: Mode change, can switch TVMEDIA PLAYERAV.  
lAddSubtract: Multifunction support  
1.Before selectingany option, press Add andSubtrac buttons forvolume control  
2.Under TV, the buttonsare for TVchannel switch.  
3.Under OSD menu, the buttonsare for selectingmenu options andadjustments.  
lMENU: Highlight OSD menu.  
3.2 DOUBLE FRAME  
1. Front ViewFig. 6:  
Frame  
LCD  
Remote Control Sensor  
Fig. 6  
2. Side ViewFig.7:  
- 3 -  
 
MENU  
Add/Subract  
MODE  
Power  
Fig. 7  
Two slotsfor CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE:7 types ofmemory  
cards supports.  
Buttons instruction pleasego back toSingle FrameAlbum instruction.  
3.DigitalAlbum display setup: (Review Single FrameAlbum forinstallation  
instruction)  
lWall setuphang horizontallyAble to hang on the wall  
lTable setupsame as the Single FrameAlbum.  
4. Back ViewFig.8:  
Hanging Hole  
DC 12V  
Signal Switch  
AVConnector  
TV  
Fig. 8  
:Headphone Input (Sound export), can connect to headphone.  
lAV input: Connectswith AV cable andmatch the cable with the correct color input.  
lSignal Switch: switch AUDIO andVIDEO signal input/output.  
lDC12V: Powerinputinstall the power cord into the DC12V input.  
lTV cable: ConnectCATVcable or TVAntenna Cableto TV terminal.  
Remote Control Guide  
- 4 -  
 
1
2
3
4
5
6
7
8
9
POWER  
MUSIC  
PHOTO  
MOVIE  
SETUP  
MENU  
ZOOM  
ROTATE  
PLAY  
10 UP  
11 STOP  
12 MODE  
13 LEFT  
14 ENTER  
15 RIGHT  
16 MUTE  
17 0  
18 DOWN  
19 VOLUME  
20 VOLUME  
21 NUMBER KEY  
22 REPEAT  
23 DISPLAY  
24 GOTO  
1 POWER  
2 MUSIC  
Pressit to turnthe machine onor off  
Inselection menu, presstheMUSICkey will selectthe music  
files. If donot select anyfiles, then systemwill automatically play  
the first musicfile. (Media PlayerMode)  
3 PHOTO  
4 MOVIE  
5 SETUP  
Inselection menupress thePHOTOkey will selectthe  
picture files. Ifdo not selectany files, thenthe system will  
automatically play thefirst picture file. (Media Player Mode)  
Inselection menu, presstheMOVIEkey will selectthe movie  
files. If donot select anyfiles, then thesystem will automatically  
play the firstmovie file. (MediaPlayer Mode)  
Pressfor setup menu. Press setup againto exit thesetup menu.  
(Media Player Mode)  
Pressit to setupthe System.  
Underthe play selection, if the picturesize does notmatch with the  
frame, then usethe ZOOMbutton to enlargethe picture. Press  
once for double the size, twicefor triple thesize, three timesfor  
four times the size, and fourtimes for theoriginal size. After  
6 MENU  
7 ZOOM  
enlarging the picture,use the“  
for surface adjustments.  
8 ROTATE  
9 PLAY  
Under the play selection, use theROTATEkey for picture  
rotation. Rotate keyonly works underPHOTO menu.  
1.Play and pause function. (MediaPlayer Mode)  
2.When playinga picture anda music atthe same time. Press once  
to stop playingthe picture, presstwice to stopboth picture and  
music playing, andpress three timesto restore playing.  
Under play mode, press on theSTOPbutton to stopplaying.  
(Media Player Mode)  
11 STOP  
12 MODE  
10/18 UP/DOWN  
SwitchPicture display modes. There are 13different display modes.  
In OSD menu, up anddown switch.(  
)
13/15 LEFT/RIGHT InOSD menu, leftand right switch. (  
increase and decreaseadjustment.  
), In setting, press for  
- 5 -  
 
14 ENTER  
16 MUTE  
Selectan option froma menu.  
Mute(Sound off).  
19/20 VOLUME  
17/21 NUMBER  
Volume control.  
Numbers:from 0 to9.  
Under media playselection, can pressthe number toselect  
files, such asMP3, JPEG, WMA,MPEG files.  
Under TV mode, use thenumbers for channelselection.  
Press Enter forinstant channel change. (Or wait 2seconds  
for auto channelchange)  
22REPEAT  
Under mediaplay selection, pressREPEATto have MP3,  
MPEG or picturefiles repeat itsplay function.  
Under mediaplay selection, usethe DISPLAY key to have  
picture and musicto play atthe same time(Background  
music).  
23DISPLAY  
24GOTO  
InPhoto, music, video, or file, usercan switch betweenthese  
4 modes. As shown under the picture below.  
Fig. 9  
Setup Menu  
5
Playing multimedia Files  
1.Go back toproduct description forinstruction on howto insert memorycard onto the  
slots.  
ReminderSupport CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE: 7 different  
types of memorycards.  
/2  
SM  
CF  
SDMMCMS  
IBM MICRODRIVE  
MS PRO  
2.display photopress PHOTO keyand enter thephoto menu. Usenumber keys (1-9)  
for photo selectionand press ENTER to select thephoto.  
3.display musicpress MUSIC key, andenter music menu. Controlling instruction isthe  
same as above.  
4.display moviepress MOVIE keyand enter moviemenu. Controlling instructionis  
the same asabove.  
5.When playing theabove media, press PLAY to pause andpress again tocontinue. Press  
STOP to stop playing.  
6.Background musicCan play musicand photo atthe same time):  
1)Under PHOTOmenu display mode, press DISPLAY can play photoand music atthe  
same time. Thefirst music andthe first picturewill be playedat the sametime.  
2)Under MUSIC menu display mode, press DISPLAY and same instructionas above.  
3)When musicand photo isplaying at thesame time. Press PLAY once to stopplaying  
photo, twice forboth music andphoto, and threeto continue playingboth.  
7.For other userinstruction please goto Remote Controlinstruction.  
5.1 SETUP MENU-MAIN PAGE  
- 6 -  
 
SETUP MENU-MAIN PAGE  
PHOTO SETUP(Change Photo settings)  
MUSIC SETUP (Change Music settings)  
SLIDESHOW SETUP(Change Slideshow  
settings)  
MOVIE SETUP (Change Movie settings)  
PREFERENCES (Change Menusettings)  
EXIT SETUP(Exit MAIN PAGE)  
GENERAL SETUP  
Press SETUP key on remotecontrol to open  
SETUP MENU.  
MAIN PAGE  
5.2 SETUP MENU-PHOTO  
PHOTO Thumbnail Digest Function Setup  
ON: Turn the function on OFF: Turn this function off  
THUMBNAIL DIGEST  
TRANSITION MODE  
ORIENTATION  
1.Enter MAIN PAGE.  
2.Press ENTER key to enter submenu PHOTO  
3.Press (  
,
) to highlight item to change, press  
MAIN PAGE  
to highlight your choice, press ENTER to save.  
4.Press ( ) to go back to upper menu. then  
highlight MAIN PAGE to go back to previous menu.  
SETUP MENU--PHOTO  
PHOTO-THUMBNAIL DIGEST  
PHOTO transition modefunction setup  
FAST  
1.Enter PHOTOSETUP menu.  
NORMAL  
SLOW  
THUMBNAIL DIGEST  
FAST  
TRANSITION MODE  
ORIENTATION  
2.Press ( ) to highlightORIENTATIONpress  
( )to show submenuon the right. Press( 、to  
select desired item. Press ENTERto save.  
3.Pressto return to previous menu. Select  
MAIN PAGE then pressENTERto return to  
previous menu.  
NORMAL  
SLOW  
MAIN PAGE  
TRANSITION MODE  
PHOTO-TRANSITION MODE  
PHOTO Orientation FunctionSetup  
DEFAULTS  
IGNORE  
THUMBNAIL DIGEST  
TRANSITION MODE  
1. Enter PHOTOSETUP menu.  
2. Press( 、to highlight ORIENTATIONpress  
( )to show submenuon the right. Press( 、 )  
to select desireditem. Press ENTERto save.  
3. Pressto return to previous menu. Select  
MAIN PAGE then pressENTERto return to  
previous menu.  
DEFAULTS  
IGNORE  
ORIENTATION  
MAIN PAGE  
ORIENTATION  
PHOTO-ORIENTATION  
- 7 -  
 
5.3 SETUP MENU-MUSIC  
SETUP MENU--MUSIC  
MUSIC Repeat FunctionSetup  
ONE: Repeat one music file.MP3)  
ALL: Repeat all music files.  
REPEAT MODE  
MAIN PAGE  
ONE  
ALL  
OFF  
SETUP MENU--MUSIC  
OFF: TurnRepeat function off.  
Instruction same as above  
MUSIC-REPEATMODE  
5.4 SETUP MENU-SLIDE SHOW  
SETUP MENU--SLIDE SHOW  
SLIDE SHOW PlayingFunction Setup  
MANUAL: Slide show plays manually.  
SLIDESHOW MODE  
FOLDER REPEAT  
INTERVAL TIME  
TRANSITION  
MANUAL  
AUTO  
AUTO START  
AUTO: Slide showplays automatically.  
Instruction same as above  
MAIN PAGE  
SLIDESHOW MODE  
SLIDE SHOW-SLIDESHOW MODE  
SETUP MENU--SLIDE SHOW  
SLIDESHOW MODE  
SLIDE SHOW FolderRepeat Function Setup  
ON: TurnFolder Repeat functionon.  
OFF: TurnFolder Repeat functionoff.  
ON  
FOLDER REPEAT  
INTERVAL TIME  
TRANSITION  
OFF  
AUTO START  
MAIN PAGE  
FOLDER REPEAT  
SLIDE SHOW-FOLDERREPEAT  
SETUP MENU--SLIDE SHOW  
SLIDE SHOW IntervalTime Setup  
ONE SECOND  
SLIDESHOW MODE  
FOLDER REPEAT  
ONE SECOND  
INTERVAL TIME  
TRANSITION  
AUTO START  
THREE SECONDS  
FIVE SECONDS  
TEN SECONDS  
THREE SECONDS  
FIVE SECONDS  
MAIN PAGE  
INTERVAL TIME  
TEN SECONDS  
SLIDE SHOW-INTERVAL TIME  
- 8 -  
 
SETUP MENU--SLIDE SHOW  
SLIDE SHOW Transition function Setup  
FULL SCREEN  
SLIDESHOW MODE  
FOLDER REPEAT  
INTERVAL TIME  
TRANSITION  
FULL SCREEN  
TOP->BOTTOM  
BOTTOM->TOP  
T/B->CENTER  
CENTER->T/B  
BLIND: T/B  
TOP->BOTTOM From top tobottom  
BOTTOM->TOP From bottom totop  
T/B->CENTER From top/bottom tocenter  
CENTER->T/B From Center toTop/bottom.  
AUTO START  
LEFT->RIGHT  
RIGHT->LERT  
L/R->CENTER  
MAIN PAGE  
BLIND:T/B  
Blinder  
TRANSITION  
LEFT->RIGHT From left toright  
RIGHT->LEFT From right toleft  
L/R->CENTER From left/right tocenter  
SLIDE SHOW-TRANSITION  
SETUP MENU--SLIDE SHOW  
SLIDE SHOWAuto Start FunctionSetup  
ON: TurnAUTO START on.  
SLIDESHOW MODE  
FOLDER REPEAT  
INTERVAL TIME  
TRANSITION  
ON  
AUTO START  
OFF  
MAIN PAGE  
OFF: TurnAUTO START off.  
AUTO START  
SLIDE SHOW-AUTO START  
5.5 SETUP MENU-MOVIE  
SETUP MENU--MOVIE  
MOVIE INTERVAL Time Function Setup  
INTERVAL TIME  
REPEAT MODE  
FAST  
NORMAL  
FAST  
MAIN PAGE  
INTERVAL TIME  
NORMAL  
MOVIE-INTERVAL TIME  
SETUP MENU--MOVIE  
INTERVAL TIME  
MOVIE Repeat ModeSetup  
OFF: TurnRepeat function off.  
ONE: Repeat onemovie file.  
ALL: Repeat allmovie file.  
REPEAT MODE  
OFF  
ONE  
ALL  
MAIN PAGE  
REPEAT MODE  
MOVIE-REPEATMODE  
5.6 SETUP MENU-PREFERENCES PAGE  
- 9 -  
 
PREFERENCES PAGE  
PREFERENCES PAGETV Type function  
Setup  
TV TYPE  
VIDEO OUTPUT  
OSD LANG  
MULTI SYSTEM  
NTSC  
PAL  
MULTI.SYSTEM: Change TV system  
(Media Player) automatically.  
OSD MESSAGE  
DEFAULTS  
NTSC: For U.S., Japan and Korea  
MAIN PAGE  
SET TV TYPE  
PAL: For countries adopting PALsystem.  
PREFERENCES PAGE-TV TYPE  
PREFERENCES PAGE  
TV TYPE  
PREFERENCES PAGE VIDEO OUTPUT  
Setup  
S-VIDEO  
YPBPR  
RGB  
VIDEO OUTPUT  
OSD LANG  
S-VIDEO:S-Video signaloutput.  
OSD MESSAGE  
DEFAULTS  
YPBPR: YPBPR signal output.  
MAIN PAGE  
SET VIDEO OUTPUT  
RGB: RGB signaloutput.  
Attention: Don tchange this item.  
PREFERENCES PAGE-VIDEO OUTPUT  
PREFERENCES PAGE  
PREFERENCES PAGE OSD Language Setup  
ENGLISH: OSD in English.  
TV TYPE  
VIDEO OUTPUT  
ENGLISH  
CHINESE  
OSD LANG  
OSD MESSAGE  
DEFAULTS  
MAIN PAGE  
SET OSD LANGUAGE  
CHINESE: OSD in Chinese.  
PREFERENCES PAGE-OSD LANG  
PREFERENCES PAGE  
PREFERENCES PAGE OSD MESSAGE  
Setup  
TV TYPE  
VIDEO OUTPUT  
OSD LANG  
ON  
OSD MESSAGE  
DEFAULTS  
ON: Turn OSD MESSAGE on.  
OFF: Turn OSD MESSAGE off.  
OFF  
MAIN PAGE  
OSD MESSAGE  
PREFERENCES PAGE-OSD MESSAGE  
PREFERENCES PAGE  
TV TYPE  
VIDEO OUTPUT  
OSD LANG  
PREFERENCES PAGE DEFAULTS Setup  
OSD MESSAGE  
RESET  
DEFAULTS  
RESET: Restoremanufacturer's defaults  
settings.  
MAIN PAGE  
OSD DEFAULTS  
PREFERENCES PAGE-DEFAULTS  
- 10 -  
 
Note:  
PREFERENCES PAGE DEFAULTS is active only in initial status by press SETUP key.  
If not, please press GOTO keyto return to initial status.  
5.7 SETUP MENU-EXIT SETUP  
MAIN PAGE EXIT SETUP  
Press( 、 to highlight EXITSETUP  
Press ENTER to exit OSDmenu.  
GENERAL SETUP  
MAIN PAGE  
6
OSD Setup Guide  
6.1 AV Mode  
Remote Control Operation  
Press MENU to highlight theOSD setting, press  
select aimed variable, then press toadjust numerical variable;If the variableis not  
numerical ( suchas TV , VIDEO ), press to selectaimed variable, thenpress  
,to select submenu, press  
,to  
ENTER to confirm. PressRETURN button at thesubmenu to returntill exit OSD, or you  
can wait forOSD exit automatically (please reference thedetail OSD menuclosing time  
setting).  
Tips: Youcan also press ENTERMENU buttons on remotecontrol or OSD on the  
machine to returntill exit theOSD setting.  
VIDEO and MEDIA PLAYER Mode  
The Specific Menus:  
The specific ofMenus are differentfor each modeof VIDEOTVMEDIA PLAYER,  
However, the same for VIDEOand MEDIA PLAYER Menus.  
Select Menu:  
VIDEO ADJUST  
OSD ADJUST  
INPUT SELECT  
AUDIO  
LANGUAGE SELECT  
EXIT  
6.1.1 VIDEO ADJUST  
COLOUR TEMPERATURE  
RESET  
RETURN  
- 11 -  
 
Operation under highlighting the variable  
HUE  
reduce/increase the variable  
BRIGHTNESS reduce/increase the variable  
CONTRAST reduce/increase the variable  
COLOR  
TEMPERATURERreduce/increase the variable  
RESET  
defaults recall  
return to Menu  
SHARPNESS reduce/increase the variable  
SATURATION reduce/increase the variable  
RETURN  
Note: To ease theoperation, the secondfunction of multifunctionbuttons will beused  
(up, down, left, right at menusetting)representing by : 、 、 、  
6.1.2 OSD ADJUST  
TIMER SET  
RETURN  
H-POSITION  
V-POSITION  
TIMER SET  
Move horizontally OSD-OFF TIME  
OSD auto off time setup  
OSD-TRANSPARENT OSD Transparency  
RETURN Return to Menu  
Move vertically  
Timer function  
TIMER SET isto set upthe clock's On/Offtime. It appearsin the upperright corner ofthe  
screen. Timeris in functiononly "Timer On" is selected. Press or toturn TIMER on  
or off. Press or to switchbetween ON, OFF, TIME, TIMER ON and TIMEROFF.  
When timer ison, three selectionswill be displayedon the screen, including ON (On  
Time) OFF (Off Time) and TIME(Current Time).Press numbered keysto adjust tothe  
correct time. Ifthe current timeis 13:15:41, press1, 3, 1, 5, 4, 1as the arrowflashes.  
Confirm it aftertime adjust.  
ON: System isoff, internal clockstill runs, whenit's time tostart, system willbe  
automatically turned on  
Off: System ison, when it's time toshut down, systemwill be automaticallyturned off.  
TIME: Current time  
When Timeris set to NO , auto-timeris off.  
1.Press ENTER /MENU to entersubmenu, then pressENTER / MENUto enter OSD  
ADJUST (orpress  
2.Press to highlight your choice.  
)
3.Then press ENTER to highlight, press to change settings. Or Press ENTER for  
options  
6.1.3 INPUT SELECT  
VIDEO  
TV  
MEDIA PLAYER  
RETURN  
- 12 -  
 
For VIDEO input signal  
For TV signal  
For Media Player  
Return to menu  
VIDEO  
TV  
MEDIA PLAYER  
RETURN  
1. Press MENU to enter submenu, then press ENTER to enter INPUT SELECT .  
2. Highlight your selection, press ENTER to confirm.  
6.1.4 AUDIO (AUDIO SETTING)  
RETURN  
VOLUME  
BASS  
1.Press MENU to enter submenu, then press ENTER to open AUDIO menu .  
TREBLE  
BALANCE  
(Or press  
2.Press  
3.Press ENTER to open andpress to change thesettings. Or pressENTER for  
)
to highlight yourchoice.  
options  
6.1.5 LANGUAGE SELECT (LANGUAGE SETTING)  
ENGLISH  
CHINESE  
RETURN  
ENGLISH  
CHINESE  
1.Press MENU to enter submenu, then press ENTER to open LANGUAGE SELECT  
menu  
2.Select a language, then press ENTER to confirm.  
6.1.6 EXIT  
press ENTER/MENU to quit OSDadjust.  
- 13 -  
 
6.2 TV MODE SETTINGS  
Menu:  
VIDEO ADJUST  
OSD ADJUST  
INPUT SELECT  
TV FUNCTION  
TV MODE  
AUDIO  
LANGUAGE SELECT  
EXIT  
The Operation forVIDEO ADJUSTOSD ADJUSTINPUT SELECTAUDIO、  
LANGUAGE SELECTEXIT are thesame for VIDEOMEDIA PLAYER mode are  
same, here arethe details ofTV function and TV mode setting.  
6.2.1 TV FUNCTION  
AUTO SCAN  
MANU SCAN  
FINE TUNE  
PRESET PROGRAMS  
SKIP PROGRAMS  
SELECT PROGRAMS  
TV Function Menu  
Auto search channels  
AUTO SCAN  
MANU SCAN  
Manual search channels  
Covering manually fullchannel width, tothe highest levelof  
performance.  
FINE TUNE  
Able to changechannels' sequence.  
PRESET PROGRAMS  
This function forskip a channel,  
a skip channel.  
on remote controlto select  
SKIP PROGRAMS  
This function forselect channel onthe machine buttons,  
machine to selectchannels.  
on  
SELECT PROGRAMS  
1.Press remotecontrol direction keyto select, andpress ENTER / MENU to confirm  
2.Select PRESET PROGRAMS setup selection, press to adjust theaimed channel  
in the mid-bottomof OSD menu, press ENTER /MENU to realize presetfunction  
- 14 -  
 
6.2.2 TV MODE  
TV MODE  
NTSC  
PAL B/G  
PAL I  
PAL D/K  
RETURN  
TV MODE  
NTSC  
US, Japan, South Korea  
Germany, Italy, Spain, Saudi Arabia and  
other countries adopting PALB/G  
PALB/G  
PAL I  
Hong Kong, UK.  
China  
PALD/K  
1. Select ENTER / MENU to enter submenupress  
2.Then press ENTER / MENU to confirm.  
button on remote control.  
7
TV Mode Control Menu  
7.1 AUTO CHANNEL SEARCH  
First time useor TV moved to newarea, needs toprocess auto channelsearch.  
1.In TV Playing mode, pressMENU to entersubmenu.(Please compare systemsetting  
part in thefront page.)  
2.Press  
3.Press  
on theremote control toTV Menu, then press ENTER to enter setting.  
on theremote control toAuto ChannelScan, press ENTER to enter Auto  
Channel Scan . After autoscan finished, therewill be autoplay first channel, and  
channels can bewatch normally.  
4.To stopAuto Scan, press ENTER Key to quit.  
7.2 CHANNEL SELECTION  
To selectchannels, press or enter number of a channel on the remote control, then  
press ENTER to confirm. Also Channel Selection can be found in the submenu for select  
channels.  
- 15 -  
 
7.3 DISPLAY CHANNEL  
While TV is in playingmodepress DISPLAYto shown channelnumber on thetop right  
corner screen.  
7.4 CHANNEL RECALL  
While TV is in playingmode, press ENTER to go backprevious channel.  
8
AV Input/Output User Instruction  
This product hasAV Connection. AV Device candirectly connect with DVD, VCD player  
(PS. AV M statusneeds to change to, whichAV input turnson)  
User Instruction below:  
AV Input &Output can be control by the switch.  
AV Input: VIDEO Input (Connect DVD/VCD AV Output),AUDIO Input (Connect DVD  
/VCD AudioOutput) , needs to switch status to IN, then digital frame playing mode switch  
to Video mode, then AV signal canbe play.  
Instruction:  
First ThingAV Signal Cableconnected follow by color:  
1.TakeDVD, VCD's VIDEOYellowConnect to AlbumTV's VIDEOAV.  
2.TakeDVD, VCD'sAUDIORedWhiteConnect to Album TV's AUDIOAV.  
Then switch Digital frame's mode to VIDEO:  
1. Press MENU into OSD system menu.  
2. Press switch to INPUT SELECT screen.  
3. Select VIDEO input mode, ENTER to confirm VIDEOinput mode.  
Finished Instruction above will be able to watching DVD,VCD.  
AV Output StatusDescription: SystemAV Signal canbe output, need to connectAV input,  
then can play media fromAlbum TV. Let Video Input/output switch to Out, also digital  
frame playing mode change to MEDIAPLAYER, then it will be able to play.  
- 16 -  
 
9
Specifications  
Panel: 10.4 TFT LCD  
Active Area: 211.2 mm(H)*158.4(V)mm  
Resolution: 640(W)*480(H)  
Horizontal frequency (H):3080KHZ  
Vetical frequency (V): 60/75HZ  
Lamp Lifetime: 50,000Hours  
Brightness: 330cd/m2  
Contract Ratio: 250 : 1  
View Angle: Vertical110 / Horizontal 140  
Input Power: DC 12V, 1.5A  
Power Consumption: 25W  
Supported Multimedia File: MPEG 1, MPEG 2  
MP3, WMA  
JPEG  
Supported Memory card: CF, SM, SD, MMC, MS, MS PRO, IBM MICRODRIVE  
- 17 -  
 
Shanghai VisartTechnologiesCo., Ltd.  
Room 906 HongcaoBuilding, 421 Hongcao Road  
Shanghai, China, P. R.  
200233  
Tel: 86-21-64955920  
Fax: 86-21-64955921  
VISART USACorporation  
1211 JohnReed Court,  
City of Industry, CA91745  
Tel: 1-626-855-3486  
Fax:1-626-855-1145  
Toll free: 1-866-4-VISART  
 

TDK Network Card DEA Series DEA252450BT 7012D1 User Manual
Technicolor Thomson Stereo System DPL911VD User Manual
Telex CD Player Scholar User Manual
Tiger Robotics 70709 User Manual
Topcom Telephone CLIP 160 User Manual
Tricity Bendix Microwave Oven TRIC750E User Manual
Tripp Lite TV Cables N816 10M User Manual
Venturer Flat Panel Television PLV7615H User Manual
Wachsmuth Krogmann Glue Gun FL 258 User Manual
Waring Popcorn Poppers WPM25 User Manual