VE-9x12/VE-9x20
TECHNICAL
Weatherproof
Enclosures
Practice
March 26, 2002
TELECOM SOLUTIONS FOR THE 21ST CENTURY
Add Weatherproof Mounting to Your
Viking Phone or Doorbox
The VE-9x12 and VE-9x20 provide
the ultimate in weather protection for
your Viking product!
VE-9x20(R)
(shown with K-1900-8)
These enclosures are constructed of
cast aluminum and are made for
years of outdoor service. The heavy-
duty aluminum doors are labeled
“Telephone” and have a gasket seal
to keep out even the harshest
weather. The VE-9x12 allows you to
choose from two panels that allow
mounting many different Viking
products.
VE-9x20(Y)
VE-9x12(R)
VE-9x12(Y)
(shown with E-1600A)
Both the VE-9x12 and VE-9x20 are
available in two high visibility colors:
safety yellow or emergency red.
Applications
• Parking lots
Features
• Maintenance areas
• Building exteriors
• Swimming pools
• Play grounds
• Heavy-duty cast aluminum construction
• Gasket sealed door
• Drip guard
• Universal mounting adapter panel
• 3/4” NPT conduit openings on top and bottom
• Available in two colors: safety yellow or emer-
gency red
• Roadside help areas
• Mounting holes for a standard RJ11 wall plate
Phone...715.386.8861
(VE-9x12 with adapter panel 1)
• Hardware included
• Available with two adapter panels (VE-9x12)
• Optional VE-PBL lock and key set available
• Compatible with these Viking products:
VE-9x12(R/Y)-1
VE-9x12(R/Y)-2
VE-9x20(R/Y)
- E-1600A
- E-10
- E-15
- E-1600-20A
- E-30
- W-1000
- W-3000
- K-1500-7
- K-1900-7
- K-1900-8
Specifications
- E-1600-03A
- E-1600-45A
- E-20A
- K-1500P-W
- K-1900W-2
- W-2000A
Dimensions: See “Specifications,” page 2
Shipping Weight: VE-9x12 - 5.4 kg (12 lbs), VE-9x20 - 7.3 kg
(16 lbs)
R = Red
Y = Yellow
Colors: Red with white lettering or yellow with red lettering
Conduit Opening: ¾” NPT with plug, top and bottom
Installation
A. Using the VE-9x12 to mount the K-1900W-2 or K-1500P-W
1. Mount the VE-9x12 to the wall, or surface desired, using the (4) corner mounting holes.
2. Run the conduit and wiring as appropriate.
3. Attach adapter panel #1 using the (4) included 8-32 x 3/8 black cap screws.
4. Attach a standard RJ11 wall plate (Radio Shack part # 279-451 or equivalent).
5. Attach the K-1900W-2 or K-1500P-W to the RJ11 wall plate.
VE-9x12 Box
(included)
Adapter Panel #1
K-1900W-2 or K-1500P-W
(included)
(not included)
RJ-11 Wall Plate
(not included)
(4) 8-32 x 3/8 black cap
screws (included)
B. Using the VE-9x12 to mount the E-1600A, E-1600-03A, E-1600-45A, W-2000A or E-20A
VE-9x12 Box
(included)
1. Mount the VE-9x12 to the wall, or surface
Adapter Panel #1
desired, using the (4) corner mounting holes.
(included)
2. Run the conduit and wiring as appropriate.
E-1600A Shown
(not included)
3. Attach adapter panel #1 using the (4) includ-
ed 8-32 x 3/8 black cap screws.
4. Attach the Viking product directly to the
adapter using the installation instructions pro-
vided in the product’s Technical Practice.
(4) 8-32 x 3/8 black cap
screws (included)
C. Using the VE-9x12 to mount the E-10, E-15, E-1600-20A, E-30, W-1000 or W-3000
VE-9x12 Box
(included)
1. Mount the VE-9x12 to the wall, or surface
Adapter Panel #2
desired, using the (4) corner mounting holes.
(included)
W-3000 Shown
(not included)
2. Run the conduit and wiring as appropriate.
3. Attach adapter panel #2 using the (4) includ-
ed 8-32 x 3/8 black cap screws..
4. Attach the Viking product directly to the
adapter using the installation instructions
provided in the product’s Technical Practice.
(4) 8-32 x 3/8 black cap
screws (included)
C. Using the VE-9x20 to mount the K-1500-7, K-1900-7 or K-1900-8
VE-9x20 Box
Adapter Panel
(included)
1. Remove adapter panel from the VE-9x20 using
Panel Phone
(not included)
(included)
the included hex key.
2. Mount the VE-9x20 to the wall, or surface
desired, using the (4) corner mounting holes.
3. Run the conduit and wiring as appropriate.
4. Attach adapter panel.
1. 6-32 Nut-
Loosen
5. Attach the Viking product directly to the adapter
panel using the installation instructions provid-
ed in the product’s Technical Practice.
3. Pull cable to
desired length
Note: If you wish to shorten the armored cable of
the panel phones, you may do so by loosening the
6-32 nut and brass collar located on the back of the
stainless steel panel and pulling the cable through
to its desired length, then retightening the nut and
brass collar (see diagram right).
2. Brass Collar - Loosen set
screw, using 3/32 hex key
(included)
(6) 8-32 x 3/8 stainless
steel cap screws (included)
Caution: When warm air comes in contact with cold surfaces, such as outside walls and conduits, it causes conden-
sation. To prevent condensation and moisture from accumulating inside the VE-9x20 always bring conduit into the bot-
tom of the unit.
D. Optional VE-PBL Push Button Lock
An optional VE-PBL lock and key set is available if you choose
to keep your VE-Series phone box locked. Please contact your
distributor or Viking Electronics “Spare Parts” website for pric-
ing and availability.
VE-PBL Lock
Important: The lock and key set is only available with one type
of key. Every lock will use the same key.
Compatible Products and Adapter Panels
Enclosure Part Number
Fax
Back #
Product
Description
Color Panel
Box
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
R or Y
2
2
1
1
1
1
2
1
Emergency speaker phone with call button, flush mount.
Emergency speaker phone, push & hold button, flush mount.
ADA compliant handsfree emergency phone.
VE-9x12
VE-9x12
VE-9x12
VE-9x12
VE-9x12
VE-9x12
VE-9x12
VE-9x12
VE-9x20
VE-9x12
VE-9x20
E-10
210
210
215
215
215
210
212
355
352
360
360
362
170
170
180
E-15
E-1600A
E-1600-03A
E-1600-45A
E-20A
ADA compliant handsfree emergency phone.
ADA compliant handsfree emergency phone, yellow.
Emergency speaker phone with push button, surface mount.
Stainless steel handsfree phone with dialer, flush mount.
Wall phone with ringer and network.
E-30
K-1500P-W
K-1500-7
K-1900W-2
K-1900-7
K-1900-8
W-1000
Vandal resistant stainless steel panel phone.
1
Hot-line wall phone with non-volatile memory.
Hot-line vandal resistant stainless steel panel phone.
Hot-line, stainless steel panel phone with keypad and armored cable. VE-9x20
2
1
2
Weather resistant handsfree doorbox, flush mount.
Weather resistant handsfree doorbox, surface mount.
Stainless steel handsfree doorbox, flush mount.
VE-9x12
VE-9x12
VE-9x12
W-2000A
W-3000
Product Support Line...715.386.8666
Fax Back Line...715.386.4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 413
Printed in the U.S.A.
ZF301480 Rev B
|