®
- User Guide
ViewSonic
- Guide de l’utilisateur
- Guía del usuario
VFD823
Digital Photo Frame
IMPORTANT: Please read this User Guide to obtain
important information on installing and using your
product in a safe manner, as well as registering your
product for future service. Warranty information
contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also
English, or in specific languages using the Regional
selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las
instrucciones en este manual”
Model No. : VS13787
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
0.1%
0.01%
0.1%
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
ii
VFD823
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
VFD823
ViewSonic Digital Photo Frame
VS13787
Model Number:
Document Number:
Serial Number:
Purchase Date:
VFD823_UG_ENG Rev. 1c 02-23-11
__________________________________
__________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
ViewSonic
iii
VFD823
Important Safety Information
Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce
the risk of fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Warning: To prevent the risk, do not remove the cover, there are no spare parts inside, refer all product
services to professional personnel.
•
•
•
•
•
Digital Photo frame is for indoor use only.
Unplug Digital Photo frame before performing care and maintenance.
Do not block the ventilation holes on the back of Digital Photo Frame at any time.
Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source.
Protect the power cord. Route power cords appropriately to avoid trip over by someone else or
pinched by items placed on or against it. Pay particular attention to the point where the cord
attaches to Digital Photo Frame.
•
•
Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter
will void your warranty.
Unplug the power cord from the outlet when the unit is not in use.
Cleaning LCD Screen
Touch the screen gently. The screen is made of glass which can be scratched or damaged.
To clean fingerprints or dust from the LCD screen, we recommend using a soft / nonabrasive cloth
such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen.
Clean the LCD screen with a cleaning cloth moistened with the liquid.
Package Content
•
•
•
•
•
Digital Photo Frame
AC power adapter (5V, 1A)
User Guide
Quick Start Guide
Stand
ViewSonic
iv
VFD823
Table of Contents
1.Precautions...............................................................2
2.Product Information ..................................................3
2.1 Features .............................................................3
2.2 Specifications......................................................3
2.3 Accessories.........................................................3
2.4 Navigation Buttons..............................................4
2.5 Input Connections .............................................5
3.Getting Started..........................................................6
3.1 Stand...................................................................6
4.Operating Instructions...............................................7
4.1 Turn on/off the Digital Photo Frame ....................7
4.2 OSD Navigation ..................................................7
4.3 Viewing Photos ...................................................8
4.4 View Calendar.....................................................9
4.5 Settings .............................................................10
5.Troubleshooting.......................................................11
ViewSonic
1
VFD823
1.Precautions
Warnings
Please read this manual carefully before operating and save it for future
reference.
Avoid exposing this device to water,
moisture or high temperature. Do not
place it near swimming pool, bathtub or
sink where it may come in contact with
water.
Clean only with a dry soft cloth; do not use
any chemical liquid for cleaning.
To ensure reliable operation of the
Only use accessories specified by the
device and to protect it from overheating,
do not block any ventilation openings.
manufacturer.
Do not step on the power cable, plug or
adapter to avoid electrical shock.
Do not attempt to service this device
yourself. Opening or removing covers
may expose you to electrical shock or
other hazards. Refer all services to a
qualified service personnel.
Please unplug this device during the
thunderstorm or not in use for a long
period.
Do not apply force on the LCD screen
during transport or usage. Avoid sharp
objects.
ViewSonic
2
VFD823
2.Product Information
2.1 Features
■High quality 8 inch LCD: 800x600 high resolution.
■Slim and fashionable design, suitable for gifts and home decoration.
■High-speed picture decoding technology in JPG format with rotation and
zooming supported.
■Slideshow with multiple transition effects.
■Calendar and Clock functions.
■User-friendly navigation buttons.
■Three-in-one (SD/SDHC/MMC) and USB flash drive supported.
2.2 Specifications
Panel size / Aspect
8-inch 4:3
ratio
Effective viewing
LCD Screen
162.0(W)x121.5(H) mm (6.4”W x 4.8”H)
area
Resolution
800(W)x600(H) pixels
Image formats
supported
JPG, JPEG (baseline coding)
Photo File
Calendar
Max. image
resolution
30 million pixels
Clock, Calendar
Memory Card
supported
MMC, SD, SDHC (max. 16GB)
Memory Medium
USB
USB flash drive
FAT, FAT32
File system
Power input
5VDC, 1.0A
Power
≤5W
consumption
Electrical
AC 100-240V,
Specifications
Input
50/60Hz
Power adapter
Output
DC5V, 1.0A
Dimensions
Weight
217x176x24 mm (8.5”W x 6.9”H x 0.9”D)
Approx. 415g (0.9 lbs)
Dimensions
Operating mode
Buttons on the panel
Operating
0°C~40°C (32°F~104°F)
-20°C~60°C (-4°F~140°F)
temperature
Environmental
Requirements
Storage
temperature
ViewSonic
3
VFD823
2.3 Accessories
Digital Photo Frame ---------------------- 1 piece
Power adapter ----------------------------- 1 piece
User’s manual ----------------------------- 1 piece
Quick start guide ------------------------- 1 piece
Stand ---------------------------------------- 1 piece
2.4 Navigation Buttons
➊ Power: a. Press briefly to turn on the device when the power is off;
b. Press & hold to turn off the device when the power is on;
c. Press briefly to turn to the Main Menu when the power is on.
➋ DOWN: Down.
➌ UP: Up.
➍ PLAY: a. Confirm/Enter; b. Press & hold for 3s to pop up the
shortcut menu; c. Play/ pause.
➎ LEFT: a. Left; b. Backward.
➏ RIGHT: a. Right; b. Forward.
➐ RETURN: Exit.
ViewSonic
4
VFD823
2.5 Input Connections
USB : connect to USB flash drive.
➊
➋
➌
SD/SDHC/MMC card slot.
DC-IN: power input 5V DC 1.0A
ViewSonic
5
VFD823
3.Getting Started
3.1 Stand
Attaching the stand: screw in the stand clockwise until it is secure.
Removing the stand: unscrew the stand counter-clockwise until it is detached.
ViewSonic
6
VFD823
4.Operating Instructions
4.1 Turn on/off the Digital Photo Frame
■Power on
Press briefly [
■Power off
] on the device, the device will be turned on.
] on the device, the device will be turned off.
Press & hold [
4.2 OSD Navigation
■Main Menu
The Main Menu is shown below. Press the Left and Right buttons
to select an icon, and press Enter [
].
■Return to the Main Menu
Press briefly [
], the device will return to the Main Menu.
ViewSonic
7
VFD823
4.3 Viewing Photos
■Slideshow
Insert an SD/SDHC/MMC or USB memory source device into an appropriate
memory slot, the photo frame will start slideshow automatically.
To exit slideshow, press the RETURN button.
To start slideshow at a particular photo, press either the LEFT or RIGHT
button and then press PLAY.
■Slideshow setup
Step 1: Press & hold [
] for the slideshow sub-menu.
] to select an option.
] to confirm and press [
Step 2: Press [
Step 3: Press [
] to exit the sub-menu.
Status
Zoom
Rotate 1
Rotate 2
Display Ratio
Copy to
Delete
Return
Status: Pause and Play.
Zoom: zoom in an image.
Rotate 1: rotate an image clockwise.
Rotate 2: rotate an image counter-clockwise.
Display Ratio: select from Auto, Original, Crop and Stretch.
Copy to: Copy photos to internal photo frame memory. It is recommended
that each image is no larger than 50KB.
Delete: delete the selected photo.
Return: exit.
ViewSonic
8
VFD823
4.4 View Calendar
Step 1: Use [
] to select “Calendar” icon on the Main Menu.
] to display a calendar.
Step 2: Press [
Step 3: Use the UP button to view the previous month and use the DOWN
button to view next month.
4.5 Settings
Step 1: Use [
] to select "Setting" icon on the Main Menu.
Step 2: Press [
] to enter the Setup Menu. The Photo Setup, Calendar
Setup and System Setup setting is shown below.
Photo Setup: Select “Photo Setup” and press ENTER.
Display Ratio: Use [
Screen.
] to select from Crop to Fill, Full Screen and Fit to
Slideshow time: Use [
and 15min.
] to select from 5sec, 15sec, 30sec, 60sec, 5min
] to select from 11 transition effects; mosaic,
Transition effect: Use [
cross, rectangle, spiral, none, random, block, split, reveal, blind, tiny lines.
Mode: Use [◄ ►] to switch among Random, Order.
Calendar Setup: Select “Calendar Setup” and press ENTER.
Set Date: Press [
] to go backward and forward among the options, and
[
] to change the value.
Clock Mode: Use [
] to select between 12Hr and 24Hr.
Set Time: Use [
] to select an option, and [
] to change the value.
ViewSonic
9
VFD823
System Setup: Select “System Setup” and press ENTER.
Language: Use [
Backlight: Use [
Power On: Use [
] to select the on-screen language.
] to adjust the brightness level.
] to enable auto power on.
Auto Boot Time: Set the timer for the photo frame to turn on automatically.
Use [ ] to select an option, and [ ] to change the value.
Power Off: Use [ ] to enable auto power off.
Auto Off Time: Set the timer for the photo frame to turn off automatically.
Use [
] to select an option, and [
] to change the value.
Auto-Power Frequency: Use [
] to set how often you want the photo
frame to use the auto power on feature.
USB Options: Udisk (for VFD823 only).
Default: Press ENTER to restore to factory settings. Select “Yes” (dark blue)
and press ENTER again to confirm.
Version: Press ENTER to display the current firmware version.
System Upgrade: For firmware upgrade.
ViewSonic
10
VFD823
5.Troubleshooting
Problem & Solution
Check whether the AC power adapter rating is correct, and
it is securely plugged to an electrical outlet.
Can not power on, and
nothing happens even if
connected to an outlet
Check whether the screen brightness is set to a low level in
the Setup menu.
The screen is off
Screen freeze and does
not respond to control
anymore
Unplug&replug the photo frame.
The image file is not supported by this device. Only
800x600 or lower resolution images in JPG format
(baseline coding) are supported.
Some images are not
displayed
Cannot read USB Flash
Drive
Check whether a USB flash drive is inserted properly. The
Max. Capacity of USB flash drive is 16G.
Check whether SD/SDHC card is inserted properly. The
notch should be facing down. Do not force the memory
card in.The Max. Capacity of SD/SDHC card is 16GB.
Cannot read SD/SDHC
card
No files are displayed on
File allocation table is damaged. Reboot the device.
the screen
Restart playing. (Note: This device has a self protection
function against sudden system abnormality.)
Exit playing and went
back to the Main Menu
automatically
ViewSonic
11
VFD823
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
Country/
Region
T=Telephone
F=Fax
Web Site
E-mail
Australia/New
Zealand
AUS=1800 880 818
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Canada
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 11 9999
Ireland (Eire)
Korea
uk/
uk/support/call-desk/
T= 080 333 2131
Latin America
(Argentina)
T= 0800-4441185
T=1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America
(Chile)
Latin America
(Columbia)
Latin America
(Mexico)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Latin America
(Peru)
T= 0800-54565
Macau
ap.viewsonic.com/me/
T= 853 2870 0303
Middle East
Contact your reseller
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico &
Virgin Islands
Singapore/
Malaysia/
Thailand
T= 65 6461 6044
South Africa
ap.viewsonic.com/za/
Contact your reseller
United
Kingdom
service_gb@viewsoniceurope.
com
uk/
uk/support/call-desk/
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
ViewSonic
12
VFD823
Limited Warranty
VIEWSONIC Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer
purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
4. Removal, installation, one way transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
refer to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
4.3: ViewSonic DPF Warranty
DPF_LW01 Rev. 1A 06-20-08
ViewSonic
13
VFD823
Mexico Limited Warranty
VIEWSONIC Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer
purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
2.
Any product on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3.
Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer
to the attached Customer Support page). You will need to provide your product’s serial number, so please
record the product information in the space provided below on your purchase for your future use. Please
retain your receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name: ______________________ Model Number: _______________________
Document Number: ____________________
Serial Number: ______________________ Purchase Date: ________________________
Extended Warranty Purchase? _______________(Y/N)
If so, what date does warranty expire? _____________________________________________
1.
2.
3.
To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
Take or ship the product in the original container packaging to an authorized ViewSonic service
center.
Round trip transportation costs for in-warranty products will be paid by ViewSonic.
ViewSonic
14
VFD823
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1.
Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2.
3.
4.
Any other damages, whether incidental, consequential or otherwise.
Any claim against the customer by any other party.
Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
15
VFD823
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de Compumantenimietnos Garantizados, S.A. de C.V.
CV.
AV. GREGORIO MENDEZ #1504
Calle Juarez 284 local 2
COL, FLORIDA C.P. 86040
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
E-Mail: [email protected]
Puebla, Pue. (Matriz):
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
72160 PUEBLA, PUE.
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
Chihuahua
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Distrito Federal:
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Monterrey:
Guerrero Acapulco
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: [email protected]
Oaxaca, Oax.:
MERIDA:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
FOR USA SUPPORT:
Tijuana:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
DPF_LW03 Rev. 1A 06-25-07
ViewSonic
16
VFD823
|