Aurora,Ohio 44202
Fax: 330-562-1999
VIDEO
PRODUCTS
INCORPORATED
1275 Danner Drive
Tel: 1-800-626-7801
VPI
INSTALLATION GUIDE FOR THE
VGA-CMP
INTRODUCTION
The VPI VGA-CMP converts VGA video to component video.
INSTALLATION
1. Turn OFF power to video source and video display device.
2. Connect a VEXT-3-MM VGA video cable (sold separately) from the video source to the female connector labeled "VGA" on
the VGA-CMP.
3. Connect a set of CMPEXT-3-MM 75 ohm RCA cables (sold separately) between the "Y", "Pb", and "Pr" connectors on the
VGA-CMP and the like connectors on the video display device. Typically the "Y" connector is green, the "Pb" connector is
blue, and the "Pr" connector is red.
4. Plug in the AC adapter and connect it to the VGA-CMP.
5. Turn ON power to the video source and video display device.
Note: Additional video cable lengths (VEXT-6/10/15/25/35/50/75/100-MM and CMPEXT-6/12/25/50/75/100-MM) may be
ordered from Video Products Inc by calling (800) 626--7801 (U.S) or 330-562-2622 or visit our website at www.vpi.us
VEXT-xx-MM
VGA-CMP
(sold separately)
CPU
P M C - A V G
HDTV
w/ component
video
c n
I
t s c u d o
I
r
P
o e d V i
V P
CMPEXT-xx-MM
(sold separately)
9 VDC
Adapter
ADAPTER
9VDC Adapter
(supplied)
VGA Video
15HD Female
Connector
Component Video
75 Ohm RCA
Connectors
Power
Connector
Left End View of VGA-CMP
Right End View of VGA-CMP
|