Project:
Location:
Item #:
Quantity:
Refrigerators
RS-1D-S7
RS-2D-S7
RS-3D-S7
RSA-1D-S7
RSA-2D-S7
RSA-3D-S7
RA-1D-S7
RA-2D-S7
RA-3D-S7
RS MODELS —
Stainless steel
exterior and
interior.
RSA MODELS —
RA MODELS —
Stainless steel fronts
and doors. Aluminum
sides and interior.
Stainless steel
exterior.
Aluminum interior.
RS and RSA Models
• Digital Thermometer/Battery Back-up
• Adjustable Stainless Steel Legs
Half Door, Pass-Thru and Remote Models Available
RA Models
• Dial Thermometer
• Adjustable Legs
Standard Features (all models)
• Energy Saver Switch
• Stainless Steel Case Front and Door(s)
• Heavy-Duty Lifetime Cam Lift Hinges
• Adjustable Wire Shelves
• Lifetime Safety Grip Handle(s)
• Self Closing Doors with Safety Stops
• Flush Mounted Automatic Interior
Lighting
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts 12” x 20” and
18” x 26” Pans
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-134a Refrigerant
• Non-Electric Condensate Evaporator
• Cord and Plug Attached on 115 V Models 12
Amps or Less
RS-2D-S7
Cabinet:
Shelving:
The cabinet front and doors are constructed
of heavy gauge polished stainless steel to
maintain an attractive appearance for years
of heavy use. Foamed-in-place polyure-
thane insulation throughout the cabinet
ensures the ultimate in energy efficiency.
The heavy-duty wire shelves are adjustable
in one inch increments. A wide door opening
allows the use of a variety of optional pan
slide types for 12” x 20”, 18” x 26”, and 14”
x 18” pans and trays.
Optional Features and Accessories
• Dial or Digital Thermometer
• Two Half Doors in Place of One Full Length
Door
• Full and Half Size Hinged Glass
Doors with Cylinder Locks
• Change Door Swing
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• 5” Diameter Heavy-Duty Swivel Casters with
Brakes
Refrigeration System:
Doors:
All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection cooling coil are
contained in an insulated housing separate
from the product zone allowing for maximum
food storage capacity. All condensate water
is disposed of automatically by the energy
efficient non-electric condensate evaporator,
no plumbing is required.
The self-closing doors are securely mounted
on rugged cam-lift hinges which have a
lifetime guarantee. Each door has a heavy
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material
which resists denting and scratching and is
easy to clean. Each safety grip handle is
guaranteed for life. Interior lighting is controlled
automatically by a switch mounted in the
hinge.
• Stainless Steel Case Back
• Fluorescent Lights
• Remote and Pass-Thru Models
Approvals:
Victory Refrigeration specification sheets
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: [email protected]
|