Verilux Indoor Furnishings PL01PLANETLIGHT User Manual

®
Planet Light  
PL01  
Energy Saving Natural Spectrum®  
Adjustable Desk Lamp  
 
IMPORTANT SAFETY INSTRUCTIONS  
SAVE THESE INSTRUCTIONS  
Thank you for purchasing the Planet Light® Natural Spectrum® Adjustable Desk  
Lamp. Please read the following safety information before using. To reduce the  
risk of fire, electrical shock, or injury to persons:  
• Do NOT dismantle.  
• Do NOT alter power cord.  
• Turn off/unplug and allow to cool before replacing bulb or cleaning.  
• For indoor use only.  
• The lamp is an electrical device. DO NOT USE NEAR WATER.  
GENERAL PRECAUTIONS  
• Before plugging in the lamp, check to make sure the voltage corresponds  
with the main voltage of your location (120 volts).  
• Do not use the lamp outside or in wet locations such as bathrooms. It is  
intended for indoor, dry use only.  
• Not for use with light dimmers, timers, motion detectors or extension cords.  
• This product may cause interference with radios, cordless telephones,  
or devices that use a wireless remote control such as televisions. If  
interference occurs, move the product away from the device, plug the  
product or device into a different outlet or move the lamp out of the line of  
sight of the remote control receiver.  
• Do NOT use lubricating agent in assembly; please see troubleshooting  
section if you are having difficulty assembling your lamp.  
• Unplug from electrical outlet for extended periods of non-use or during  
lightning storms to ensure protection of the electronics.  
3
 
Bulb Installation and Removal  
Removal  
D
1. Unplug lamp from power source.  
2. Firmly hold bulb base (B) and pull  
bulb (C) from the socket (A) in an  
outward motion.  
Installation  
1. Unplug lamp from  
power source.  
2. Firmly hold base (B)  
and push bulb (C) into  
the socket (A).  
B
C
A
3. Be sure bulb is  
firmly seated in the  
socket (see below) and snapped  
into the metal bulb clip (D).  
YES  
NO  
D
No  
gap  
Notice  
large gap  
Correctly seated bulb  
Incorrectly seated bulb  
CAUTION: ALWAYS UNPLUG LAMP BEFORE PERFORMING BULB  
REPLACEMENT OR INSTALLATION.  
4
 
Lamp Diagram  
Lamp Head  
Head Adjustment  
Knob  
Upper Shaft  
Upper Shaft  
Adjustment Knob  
Lower Shaft  
On/Off Switch  
Base  
5
 
Troubleshooting  
• Make sure all power connectors, cords and plugs are inserted fully  
and securely.  
• Make sure there is power to the wall outlet or try another outlet – not  
connected to a dimmer.  
Be sure the bulb is securely seated into the socket, repeat the bulb  
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET  
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.  
Care & Cleaning  
Your Planet Light® lamp is made from high quality materials that will  
last for many years with a minimum of care.  
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR  
CLEANERS CONTAINING ABRASIVES OR AMMONIA  
WARNING: To prevent risk of shock or personal injury  
when cleaning lamp, make sure you have turned off and  
unplugged the lamp and allow sufficient time for the bulb  
to cool.  
6
 
One Year Limited Warranty  
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE  
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!  
Customer Service Department at 802-496-3101 during normal business hours.  
This limited warranty is provided by: Verilux®, Inc., 340 Mad River Park, Waitsfield, VT 05673  
Verilux warrants this product to be free from defects in material and workmanship for a  
period of one year from the date of the original retail purchase from Verilux or an authorized  
Verilux distributor. Proof of purchase is required for all warranty claims. During the  
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of  
this product, at no charge to the customer, subject to the following limitations: This limited  
warranty does not include any postage, freight, handling, insurance or delivery fees. This  
warranty does not cover damage, defect or failure caused by or resulting from accident,  
external destruction, alteration, modification, abuse, misuse or misapplication of this  
product.  
This warranty does not cover damage to the product resulting from return shipping or  
handling. The use of shipping insurance is recommended to help protect your product.  
Return Authorization is required for all returns. To obtain a Return Authorization, please  
contact the Verilux Customer Service Department at 802-496-3101.  
If, during the first year of ownership, this product fails to operate properly, it should be  
customer service representative at 802-496-3101.  
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.  
Voltage variations and spikes can damage electronic components in any system. A quality  
suppressor can eliminate the vast majority of failures attributed to surges and may be  
purchased at electronics stores.  
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.  
7
 
Printed in China for Verilux, Inc.  
© Copyright 2010 Verilux, Inc. All rights reserved.  
PL01-MAN-Rev3  
 

Toshiba Network Card MK6026GAX User Manual
Trane Air Conditioner RT PRC007 EN User Manual
Tricity Bendix Washer BIW 104 W User Manual
Tripp Lite Network Cables EZA VGAAX 2 User Manual
Uniden Cordless Telephone EXI916 User Manual
Unified Brands Music Mixer MX 8 User Manual
Univex All in One Printer X7675 User Manual
ViewSonic Projector PJ658 User Manual
Vizio Speaker System S4251WB4 User Manual
Wayne Water Pump 351002 001 User Manual