Uniden Conference Phone FP203 User Manual

FP203

LOCATION OF CONTROLS

Hook Switch

LCD Display

This unit is not

NEW Call and

NEW Message

Indicator

waterproof. Do not

expose this product to

rain, water, moisture

or any other liquid.

Handset

Speaker

Coil Cord

In Use Indicator

SETUP

AC Adaptor

Optional AA Batteries

can be used instead of

the AC Adaptor.

Line Cord

New Zealand

Battery

Compartment

Australia

Tel Line Adaptor (Not supplied)

Jack for

Coil Cord

Ringer

HI/LO

Switch

Jack for Line Cord

Adaptor

Socket

Connecting Line Cords and AC Adaptor

1. Plug one end of the supplied telephone cord into the telephone line socket located

at the rear of the phone.

2. Plug the other end into the telephone line wall jack.

3. Plug the AC Adaptor lead into the power socket at the rear of the phone.

4. Plug AC Adaptor into a standard wall outlet and switch it on.

Setting Time and Date

If you subscribe to a Caller ID Service, your time and date will automatically be set for you

when you receive your first call to this unit.

FLASH

1. Press and hold

2. Use and

, display shows "Set Time".

DIAL

to select the correct number, press

to confirm and move

to the next digit, HH:MM DD/MM.

DEL

3. Press

to exit.

OPTIONAL BACKUP BATTERY INSTALLATION

Batteries may be used instead of the supplied AC Adaptor.

1. Remove the battery compartment cover.

2. Fit 4 x AA alkaline batteries.

If using the AC Adaptor,

Batteries are not

required for normal

operation.

3. Replace the cover and secure with screw.

Battery

Compartment

4x AA Batteries

Push in to

remove cover

Digit Insert 0 Caller ID

To correctly display and dial Call ID numbers, you may need to insert a digit at the beginning of

your telephone number. (eg: in New Zealand, Telecom requires a '0' to be inserted.)

New Zealand:

If you subscribe to Telecom New Zealand, this code has already been set for you to '0'. If you

subscribe to another telephone company, please set the LDS code as blank '_ _'.

If this phone is used with a business PABX - consult the PABX manufacturer for the correct setting.

Australia:

Telecom New Zealand

Customers: this code is

already set to "0".

For private household telephone lines, set to 'Insert O Off'.

If this phone is used with a business PABX - consult the PABX manufacturer for the

correct setting.

Australian Customers:

Set to 'Insert 0 Off'.

While the handset is on the base:

DEL

1. Press

2. Use

button twice quickly. "Insert O Off" or "Insert O On" will be displayed.

and to choose on or off.

to store.

3. Press

DIAL

TELEPHONE KEY FUNCTIONS

Ringer Hi/Low

Set the Ringer Switch to the desired level

underneath the unit.

for HI and

for LOW. The Switch is located

Regular dialling

Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The

dialled number will appear on the display screen whenever you make a call.

Redial function

To redial the previous number you called. Lift the handset or press

REDIAL

and press

Last 10 number redial

1. With the handset on the cradle press

2. Press or

3. Pick up the handset or press

REDIAL

to review the last 10 numbers dialled.

to dial the selected number.

Pause function

To insert a temporary pause. Press the

REDIAL

/pause button during a dialling sequence. For

example, in some cases when dialling an international number you need to place a pause between

the clusters of numbers to allow the telephone company, relaying the call, time to process it. The

REDIAL

number 011-886-22-795-1234 would need to be dialled 011

22, /pause795, /pause 12345.

/pause 886,

/pause

REDIAL

Mute button

For privacy when you are required to consult with a person standing next to you and do not wish

MUTE

the party on the line to hear your conversation, press

conversation.

. Press

again to resume the

Handset Volume

During the call press

to adjust the volume.

Flash button - Call Waiting

If the Call Waiting tone sounds while you are on a call -

FLASH

New Zealand: Press the

FLASH

button to switch between callers.

to switch between callers.

Australia: Press

then

For 'Call Waiting' to

operate you must

Speaker Button

To switch your call to speaker phone, press

back, simply pick up the handset and speak. You can make, receive and dial in the

speaker mode.

subscribe to this service

through your local

telephone company.

If you do not have this

service, then pressing

the flash button during a

call may disconnect the

caller.

and hang up the handset. To switch

Speaker Volume

During the conversation, you can press

to adjust the speaker volume.

DISPLAY MESSAGES

Message Waiting (New Zealand Only)

MSG

If you have arranged a voice mail service with your

telephone company, the LCD screen will display

MESSAGE WAITING for a few seconds after a call is

received. The screen will then display MSG in the upper

left corner until you retrieve the message from the voice

mail service. MESSAGE WAITING will be saved as a

Caller ID record. The MSG function may not be

available in all areas.

For LCD messages to

operate, you must first

subscribe to the caller ID

service through your

local telephone company.

Total & New Calls

This displays the total calls received and which of those

are new calls.

No Calls

When all calls have been deleted the screen will display

NO CALL.

Private

If a caller has exercised the option which prevents the

caller's name and number from being sent, the screen

will display PRIVATE.

Repeat Calls

If the same call is received again on the same day,

REPEAT will be displayed in the top right of the LCD

screen.

End of List

This is displayed when you use the review

and have reached the top end of the call history list. If

there are no calls in the list the LCD screen displays NO

CALL.

Out of Area

This will be displayed when the caller's telephone

company does not provide caller ID services or does not

provide name and number services via the long distance

network.

Battery Low Indicator

If you are using batteries, this icon is displayed when the

batteries require replacing.

CALLER ID

A caller ID record consists of the following information:

Time and Date of call

Number of new calls or record number

Total calls

The LCD display will not

operate if the AC Adaptor

is not connected or if the

batteries are flat or not

installed.

Caller's number

Caller's name (if available)

CALLER ID OPERATION

New Call Indicator

The red indicator light of your phone will flash when you have New Calls. It will

continue to flash until you have reviewed the calls displayed on the LCD screen.

Review Call Records

For call ID features to

operate you must first

subscribe to this service

through your local

Use the review

call record list, END OF LIST will be displayed.

buttons to scroll through the caller list. At the end of the

Call Records

Your phone stores up to 99 Call records. When the list is full a new incoming call will

automatically delete the oldest call record.

telephone company.

Call Back feature

You can automatically dial the number of a person who has recently called.

1. Select the caller that you wish to call back by pressing the review

button.

2. Pick up the handset of press

and the number will be dialled.

Del button - for deleting Caller ID records

Individual Delete

1. With the handset in its cradle, press

you wish to delete.

buttons or select the number

DEL

2. Now press the

3. To confirm the number chosen is to be deleted, press

button. The LCD screen will show DEL?

DEL

again. The number

will be deleted.

Delete All

1. With the handset in its cradle, press

buttons or select the number

you wish to delete.

2. Press and hold

DEL

and All Del will be displayed.

DEL

3. Press

to delete all records.

SPEED DIAL NUMBERS

Six speed dial numbers can be programmed into the memory of your telephone

(

). Each memory location can store a maximum of 16 digits.

A Speed Dial label has

been provided to

Storing One-Touch Speed Dial Numbers

STORE

1. Press

. The LCD shows "-->"

record Speed Dial

names. You may wish

to stick it on the inside

of the handset.

2. Enter phone number using the keypad (up to 16 digits).

STORE

3. Press

. The LCD shows "-->?".

4. Press the speed dial location you wish to store the number to

5. The LCD shows SAVE OK.

Storing Two-Touch Speed Dial Numbers

STORE

1. Press

. The LCD shows "-->".

2. Enter phone number using the keypad (up to 16 digits).

STORE

3. Press

. The LCD shows "-->?".

4. Press the speed dial location you wish to store the number to

5. The LCD shows SAVE OK.

Dialing One-Touch Numbers

To dial a stored memory number:

1. Pick up the handset or press

2. Press the desired speed dial button,

Dialing Two-Touch Numbers

To dial a stored two-touch memory number:

1. Pick up the handset or press

AUTO

2. Press

followed by the location number, (

TROUBLESHOOTING

Blank or faint screen

Check the line cord, AC Adaptor or replace batteries.

Batteries not lasting

Review new calls immediately to prevent the new call light flashing for extended

periods.

Caller ID will not work properly

Your phone stores up to 99 Call records. When the list is full a new incoming call will

automatically delete the oldest call record.

Phone will not ring

You may have too many communication devices connected to a single line. A

communication device can be a phone, a modem or fax machine. Disconnect some

devices.

No dial tone

Verify that you are using the correct line cord and that it is plugged in correctly.

Caller ID

Please check with your service provider that your subscription to this service is active.

Please refer to our website for further information and frequently asked questions.

New Zealand - www.uniden.co.nz

Australia - www.uniden.com.au

WARRANTY

One Year Limited Warranty

UNIDEN FP203 CORDED PHONE

Important:

Warrantor:

Evidence of original purchase is required for warranty service.

Uniden Australia Pty Limited. ABN 58001 865 498

Uniden New Zealand

Warranty only available in original country of purchase.

ELEMENT OF WARRANTY:

Uniden warrants to the original retail owner for the duration of this warranty, its FP203

corded phone (herein after referred to as the Product), to be free from defects in

materials and craftsmanship with only the limitations or exclusions set out below.

WARRANTY DURATION:

This warranty to the original retail owner only, shall terminate and be of no further

effect 1year (12 months) after the date of original retail sale. This warranty will be

deemed invalid if the Product is;

(A) Damaged or not maintained as reasonable and necessary,

(B) Modified, altered or used as part of any conversion kits, subassemblies, or any

configurations not sold by Uniden,

(D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or

malfunction covered by this warranty,

(E) Used in conjunction with any equipment or parts or as part of a system not

manufactured by Uniden, or

(F) Where the Serial Number label of the product has been removed or damaged

beyond recognition.

Warranty only valid in the country of original retail/sale.

PARTS COVERED:

This warranty covers for one (1) year, the Product and included accessories.

STATEMENT OF REMEDY:

In the event that the Product does not conform to this warranty at any time while this

warranty is in effect, the warrantor at its discretion, will repair the defect or replace the

Product and return it to you without charge for parts or service. This warranty does not

provide for reimbursement or payment of incidental or consequential damages. This

EXPRESS WARRANTY is in addition to and does not in any way affect your rights under

the TRADE PRACTICES ACT 1974 (Cth) (Australia) or the CONSUMER GUARANTEES ACT

(New Zealand).

PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY:

In the event that the Product does not conform to this warranty, the Product should be

shipped or delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of

the sales docket), to the warrantor at:

UNIDEN AUSTRALIA

SERVICE DIVISION

345 Princes Highway,

Rockdale NSW 2216

Fax (02) 9599 3278

www.uniden.com.au

UNIDEN NEW ZEALAND LIMITED

SERVICE DIVISION

150 Harris Road,

East Tamaki, Auckland

Fax (09) 274 4253

www.uniden.co.nz

Customers in other States should ship or deliver the Product freight pre-paid to their

nearest Uniden Authorised Repair Centre Contact Uniden for the nearest Warranty

Agent to you).

Uniden Australia Pty Limited

Uniden New Zealand Limited

TDK Printer BHP6321FU User Manual
Technicolor Thomson IP Phone TG787 User Manual
Teledyne Oxygen Equipment BDS 3960 User Manual
Texas Instruments Stereo Amplifier TAS5727 User Manual
Toshiba Camcorder D R3 User Manual
Toshiba Projector TDP SW20 User Manual
Tripp Lite TV Cables P504 100 EZ User Manual
Vermont Casting Indoor Fireplace D232 User Manual
Vivotek Digital Camera IP3132 User Manual
Weber Burner 89796 User Manual