Uniden Baby Monitor UBW2101 User Manual

UBW2101  
3.5” LCD Portable Wireless  
Baby Monitoring System  
If any items are missing or damaged, contact our Customer Care Line  
immediately. Never use damaged products!  
 
Important Safety Precautions (cont’d)  
Warnings to Parents and Other Users  
Failure to follow these warnings and the assembly instructions could result in  
serious injury or death. This product is not designed or intended for use as a  
medical monitor, nor should this product be used as a substitution for medical or  
parental supervision. Always be sure that both the transmitter and receiver are  
working properly, and are within range of each other.  
x STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.  
x WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy  
and is not intended for use by any children under the age of 13. If you are between  
the ages of 13 and 18, review these terms, conditions and safety warnings with  
your parents or guardian to make sure that you and your parent or guardian  
understand these terms, conditions, and safety warnings.  
x Allow for proper ventilation when units are in use. Do not cover the camera or  
receiver with any object such as a blanket. Do not place it in a drawer or in any  
location which would muffle the sound or interfere with the normal flow of air.  
SAVE THESE INSTRUCTIONS!  
For best results:  
To avoid damage to your equipment, follow these simple precautions:  
x Do not drop, puncture or disassemble any part of the equipment. There are no  
user-serviceable parts inside.  
x Do not expose the equipment to high temperatures, and avoid leaving the equip-  
ment in direct sunlight for more than a few minutes. Heat can damage the case or  
electrical parts.  
x Do not place heavy items on top of the equipment or expose the equipment to  
heavy pressure.  
x Remove the power adapter during long periods between usages.  
x Clean only with a dry cloth.  
Failure to follow the instructions in this operating manual will void the  
warranty. Uniden assumes no liability for damages to property or injury  
to persons caused by improper handling or failure to comply with these  
safety instructions  
.
3
 
Contents  
Important Safety Precautions .............................................................2  
What’s in the Box .................................................................................4  
Parts of the Baby Monitoring System ................................................5  
Getting Started .....................................................................................6  
Step 1. Set-up and Installation ..........................................................6  
Step 2. Basic Operation.....................................................................7  
I. Get to Know the Camera ................................................................7  
II. Get to Know the LCD Monitor ........................................................8  
Step 3. Advanced Operation..............................................................9  
I. Get to Know the Display Icons.......................................................9  
II. Get to Know the Main Menu ........................................................10  
System Setup - Time Setting/Factory Defaults ...........................10  
Camera Setup - Turn Camera(s) ON/OFF/Camera Scan Period..11  
Pairing a Camera/Power Save Mode/SD Card Format...............12  
VOX Setting - VOX Sensitivity/Enable VOX Recording...............13  
Brightness...................................................................................13  
Alarm Setup/Event List................................................................14  
About Digital Wirless Technology ...................................................15  
Troubleshooting Guide ......................................................................16  
Product Specifications ......................................................................17  
Storage Media Management...............................................................17  
Lithium-Polymer Battery Warning .......................................................17  
Recycling and Disposal Information....................................................17  
FCC Compliance Information........................................................... 18  
Part 15 Compliance Statement.......................................................... 18  
RF Exposure Information................................................................... 18  
IC Compliance Information ................................................................ 18  
Radio Equipment Notice .................................................................... 18  
CE Compliance Information............................................................... 18  
One Year Limited Warranty .............................................................. 19  
What’s in the Box?  
1 x Digital Wireless Camera  
1 x 3.5” LCD Digital Wireless Monitor  
1 x AC Adapter for Camera  
1 x AC Adapter for Monitor  
1 x Goose Neck Camera Stand with mount screws  
1 x Owner’s Manual  
# If any items are missing or damaged, contact our Customer Care Line immediately!  
4
 
Parts of the Baby Monitoring System  
Camera  
13  
PWR.  
DC IN 5V/1A  
1. Lens  
7. Power/Lullaby play switch  
8. Pairing Key  
9. Reset  
10. DC IN Jack  
11. Power Adapter  
12. Goose Neck Mount Stand  
2. IR (Infrared) LEDs  
3. Light Sensor  
4. Battery Indicator  
5. Link Indicator  
6. Power Indicator  
LCD Monitor (Receiver)  
1. Battery Indicator  
2. Power Indicator  
9. PTT (Push to Talk)/OK  
10. Power button  
11. SD card slot  
12. USB port (reserved use)  
13. DC IN jack  
3. Cursor up/Channel switch  
4. Cursor left/Volume down  
5. Cursor down/Lullaby play button  
6. Cursor right/Volume up  
7. Enter/Exit Menu button  
8. Record/Delete  
14. Reset  
15. Power Adapter  
5
 
Getting Started  
Step 1. Connection & Installation  
Camera Connection  
1. Connect the power cable to the  
camera’s DC IN jack, and then  
plug the power adapter to a  
standard 120V AC wall outlet.  
2
2. Slide the power switch down  
once to turn ON the camera.  
1
DC IN 5V/1A  
# The built-in Lithium-Polymer battery charges automatically when the  
power adapter is connected. Charge the battery to full capacity before  
using the monitor in portable mode. The battery is at full capacity when  
the green battery indicator turns off.  
# Only use the 5V/1A power adapter provided in the package.  
LCD Monitor Connection  
1. Connect the power cable to the  
2
monitor’s DC IN jack and then  
plug the power adapter to a  
standard 120V AC wall outlet.  
2. Press the power button to turn  
ON the monitor.  
1
# The built-in Lithium-Polymer battery charges automatically when the  
power adapter is connected. Charge the battery to full capacity before  
using the monitor in portable mode.  
# In portable mode, charge the battery when the battery indicator lights  
up red.  
# Only use the 5V/1A power adapter provided in the package.  
6
 
Getting Started (cont’d)  
Installing the Camera on the Goose Neck Mount Stand  
Use the goose neck mount stand to install the camera at an appropriate angle  
in a semi-permanent (desktop mount option) or permanent (wall mount option)  
location.  
# Ensure the install location is within range of a standard 120 V AC wall  
outlet.  
Desktop mount option  
1. Select the position for the camera  
and secure the camera stand.  
Wall mount option  
1. Select the position for the  
mount stand and mark out  
the mount holes. The two wall  
screws should be spaced 1-5/8  
in. (40mm) apart. Screws and  
anchors are supplied, but if  
necessary, use an appropriate  
screw type for the mounting  
surface.  
Lock Nut  
2. Mount the camera onto the  
bracket, but do not tighten.  
Cord Guides  
3. Adjust the camera to the proper  
view angle. Make sure the lens  
is upright relative to your subject,  
then tighten the lock nut to secure  
the camera.  
4. Connect the AC adapter, and  
route the cord along the guides in  
the stand.  
5. At the LCD monitor, adjust the  
antenna to an upright position.  
Step 2: Basic Operation  
I. Get to Know The Camera  
PWR.  
DC IN 5V/1A  
7
 
Step 2: Basic Operation (cont’d)  
1) Battery Indicator  
Green LED: Battery charging; charge battery until green LED turns off.  
Red LED: Battery low (portable mode); camera will turn off within 3 minutes.  
Connect the power adapter for charging or continuous use.  
LED off: Battery fully charged.  
2) Link Indicator  
Flashing LED: Pairing sequence is in process. See Advanced Operation -  
Pairing Camera section as a guide.  
Blue LED: Camera is picked up by the LCD monitor.  
LED OFF: Camera is in stand-by mode.  
3) Power Indicator  
LED turns ON when camera is powered ON.  
4) Power / Lullaby Play Switch  
Slide down once to power ON the camera. To power OFF, slide down and  
hold the switch for 2 seconds, until the power indicator turns off. After power  
on; slide down to turn on the lullaby play of the camera, slide & hold ~2-3  
seconds to turn off.  
5) Link Button  
Press to pair the camera with the LCD monitor.  
See Advanced Operation - Pairing Camera.  
II. Get to Know the LCD Monitor  
1
10  
2
3
4
5
8
9
6
7
1) Battery Indicator  
Green LED: Battery charging; charge the battery until the green LED turns  
off.  
Red LED: Battery low (portable mode); monitor will turn off within 3 minutes.  
Connect the power adapter for charging or continuous use.  
LED off: Battery fully charged.  
2) Power Indicator  
LED turns ON when monitor is powered ON.  
# LED remains ON while LCD display is OFF in Power Save mode.  
8
 
Standard View Mode  
View Next Camera (CH1-4)  
Volume Down  
Menu Mode  
Cursor Up  
Quad View Mode  
Hot Key CH 1  
Hot Key CH 2  
Hot Key CH 3  
Hot Key CH 4  
3)  
4)  
5)  
6)  
7)  
8)  
9)  
10)  
Cursor Left  
Lullaby Play Switch  
Volume Up  
Cursor Down  
Cursor Right  
ESC (back)  
Enter Menu Mode  
Manual Record  
Delete Record File  
OK (confirm)  
Push to Talk  
Power Button  
Press to turn power ON, press and hold for 2 seconds to turn power OFF.  
Step 3: Advanced Operation  
I. Get to Know the Display Icons  
VOX  
a
b
c
d
e
f
g
h
k
3
i
j
Signal Indicator  
VOX ON  
a.  
b.  
f.  
VOX  
Current Channel Indicator  
VOX Alarm ON  
g.  
c.  
h.  
i.  
SD Card  
Battery Low Indicator (Cam)  
Push to talk Indicator  
- available  
j.  
- locked  
System Time  
3
k.  
- full (flashing)  
Volume Bar  
- error (flashing)  
# Volume bar is green when camera lullaby  
d.  
e.  
Record indicator (flashing)  
volume is adjusted.  
# Volume bar is blue when monitor volume  
Lullaby Play Indicator  
Lullaby Mute Indicator  
is adjusted.  
9
 
Advanced Operation (cont’d)  
II. Get to Know the Main Menu  
1. Press MENU in standard view  
mode to display the main menu (the  
example shows the menu with the  
Brightness option highlighted).  
2. Use  
/
/ / to highlight a  
menu option.Press OK to enter  
the setting menu.  
3. Use  
/
to select a setting if  
necessary.  
4. Press ESC to go back or exit the  
menu.  
System Setup - Time Setting  
Set the date and time used for Event  
List recording.  
1. Use  
/
/ / to highlight  
a menu option.  
2. Press OK to save.  
System Setup - Set to Factory Default  
1. Use  
/
/ / to highlight  
a menu option.  
2. Press OK to save.  
10  
 
Advanced Operation (cont’d)  
II. Get to Know the Main Menu  
Camera Setup - Turn Camera(s) On/Off  
1. Use / to select the camera  
you want to turn off.  
2. Press OK to change ON/OFF  
status.  
# Make sure available cameras are set to  
ON for SCAN or Quad mode.  
Camera Setup - Camera Scan Period  
1. Use / to change Scan Time  
interval from OFF/5 sec/15 sec/  
Quad.  
2. Press OK to confirm the settings.  
# To leave Quad display, simply press  
directional keys to enter single channel  
view.  
Pairing - Pairing a Camera  
= CAM1;  
= CAM3;  
= CAM2;  
= CAM4;  
# When the system enters into power  
save mode from Quad, press any key to  
resume monitor view.  
11  
 
Advanced Operation (cont’d)  
II. Get to Know the Main Menu (cont’d)  
Pairing - Pairing a Camera  
1. Use / to select a channel.  
2. Press OK to start system  
countdown from 60 seconds.  
3. Within the 60 second countdown,  
press PAIR at the camera side. The  
camera signal will display when  
pairing is complete.  
Power Saving - Power Saving  
Use  
to turn Power Saving  
/ ►  
mode ON/OFF. If VOX is turned on,  
the receiver and camera will come  
out of Power Save mode when sound  
is detected according to the set  
sensitivity level. This means at night,  
the monitor LCD will be off, but will  
automatically turn on when a noise is  
detected.  
# By setting Power Saving mode ON, both  
receiver and camera will enter standby  
mode after 2-minute idle time, and  
speaker volume will be muted. Press  
the power key of the receiver to resume  
monitoring, and camera key to enter  
single channel view.  
SD Card Format - SD Card Format  
Use  
to select No or Yes.  
/ ►  
# For first time use, it is strongly  
recommended to format the SD card.  
12  
 
Advanced Operation (cont’d)  
II. Get to Know the Main Menu (cont’d)  
VOX Setting - VOX Sensitivity (VOX is voice activation)  
Use  
sensitivity level.  
to adjust the VOX  
/ ►  
Level 1 - low sensitivity.  
Level 3 - high sensitivity.  
# At OFF setting, the VOX function is  
disabled.  
VOX Setting - Enable VOX Recording  
When set to ON, the system will  
auto record for 30 seconds when the  
camera is triggered by voice.  
# Please set VOX sensitivity to level 1~3 to  
enable use of this function.  
Brightness - Brightness  
Press OK to enter the camera  
brightness adjustment bar; press  
/ to adjust the brightness of the  
current channel.  
13  
 
Advanced Operation (cont’d)  
II. Get to Know the Main Menu (cont’d)  
Alarm Setup - Alarm Setup  
1. Use / to move between the  
items.  
2. Press OK to shift to ON/OFF.  
VOX alarm ON: The monitor will give  
an alarm for 15 seconds when the  
camera is triggered by voice.  
Battery low alarm ON: The monitor  
will give an alarm for 15 seconds  
when the camera battery is low.  
Out of range alarm ON: The monitor  
will give an alarm for 15 seconds  
when the monitor and camera(s) are  
out of wireless transmitting range.  
Event List - Event List  
Playback Mode  
1. Press OK to enter the Record  
folder.  
2. Press OK again to Play/Pause a  
file.  
3. Press to fast forward the video  
clip.  
4. Press to rewind the videoclip.  
5. Press ESC to Stop/Exit.  
Managing the Event List  
1. Use / to select the record file  
you want to delete.  
2. Press DEL to enter delete mode.  
3. Use / to select Yes or No.  
4. Press OK to delete.  
# Recording files will be saved every 30  
seconds if recording time exceeds 30  
seconds.  
Recording folder format is year, month, day. Example: 120123 = 2012 Jan 23.  
Individually recorded file format is in a 24 hour format, hour, minutes, seconds.  
Example: 161308_1 = 4:13:08 pm, camera #1.  
14  
 
About Digital Wireless Technology  
This section offers some helpful information to overcome most problems you  
may encounter.  
Problem Diagnosis  
About 2.4GHz Digital Wireless Signal  
This innovative digital wireless solution integrates advanced Frequency Hopping  
Spread Spectrum (FHSS) technology. This technology greatly reduces the  
interference that comes from other devices using the same radio frequency  
(2.4GHz), e.g. WIFI, Bluetooth, cordless phone...etc. You can now experience  
improved wireless surveillance quality without flicker and noisy images.  
However, weaker signals (lag or still image) may be observed from time to time,  
depending on the environment where the system is installed. Complies with FCC  
part 15.247, ETSI (EN) 300 328; audio/video signals transmitted out up to about  
500 foot (150 meters) line of sight can be supported. Line of sight installation  
though, is usually not a common practice. Factors affecting the transmission  
include microwave ovens or other high frequency electromagnetic waves.  
Reinforced concrete walls, large scale metal products, and metal furniture should  
not be located near the camera or the monitor unit. Do not place near water.  
Person walking by may cause unstable signal quality.  
How to improve the wireless signal quality  
If possible, remove obstacles in between the camera or the monitor that might  
reflect the signal. These could include furniture, cabinets, etc. If you feel the  
wireless signal is not good enough, place the monitor at a new angle, readjust  
its position to make an improvement, or simply move the camera closer to the  
monitor.  
Why Image Compression?  
In order to provide a private and interference free wireless service, this  
digital wireless solution works on a 2MB narrow hopping band. Different from  
traditional 2.4GHz analog signal, this digital wireless signal is compressed and  
presented as Motion JPEG (MJPEG) format. By digitizing and compressing  
the raw analog data, the bandwidth is used more efficiently and securely.  
Consequently, you might observe an indent image line if the signal is viewed on  
a larger display monitor or plasma TV.  
15  
 
Troubleshooting Guide  
If you have any trouble with your baby monitor, check this section first. If you  
need help, visit the customer support page of our website listed on the front  
cover.  
Problems  
Possible Causes  
Remedies  
Check power adapter and power  
cable connection, or battery has run  
out.  
No power supply to  
camera (Battery low)  
Camera is not paired  
with receiver  
See pairing operation for detail.  
System  
message  
shows  
Move the camera closer to the  
monitor.  
Service out of range  
Signal being blocked  
“NO Signal”  
If possible, remove major obstacles  
in between the camera and monitor,  
or relocate the camera to a different  
location.  
Antenna directional  
limitation  
Adjust camera and monitor position.  
If possible, remove major obstacles  
in between the camera and monitor,  
or relocate the camera to a different  
location.  
Signal being blocked  
Low signal  
or unstable  
signal  
Strong radio  
signal nearby  
Keep WiFi router away from the  
camera and/or monitor.  
Keep working motors (hair dryer/  
electric heater/air conditioner/water  
pump) or microwave oven away from  
the camera and/or monitor.  
Strong  
electromagnetic  
interference nearby  
Recording  
does not  
work  
No SD card  
Insert SD card into SD card slot.  
Unlock the SD card.  
SD card locked  
Black screen  
& buttons are  
not  
Press the power key to resume  
receiving the image. Please refer to  
Power Saving section on page 12 for  
details.  
Power save mode on  
functioning  
The camera has a high sensitivity  
microphone. Keep the camera at least  
10 feet away from the receiver. If the  
camera must be within 10 feet of the  
receiver, keep the volume down.  
Audio  
feedback  
Camera and receiver  
are too close  
VOX Record  
& Alarm do  
not work  
VOX Menu set to  
“OFF”  
Set VOX Sensitivity/VOX Alarm/VOX  
Record to ON.  
16  
 
Product Specification  
Camera Unit  
Monitor Unit  
4
Maximum Channels  
Communication  
Range  
500 feet (300 m) in open space  
320 x 240 (QVGA)  
Resolution  
Operating  
Temperature  
-10˚C (+14˚F) ~ +40˚C (+104˚F)  
Operation Voltage  
DC 5V / 1A  
DC 5V / 1A  
Current  
Consumption  
680 mA (max)  
680 mA (max)  
10 feet (3 m)  
Night Vision  
2.4 in (60mm) (W)  
5.1 in (130mm) (W)  
4.6 in. (116mm) (H) 3.5 in (90mm) (H)  
Dimensions  
1.3 in (32mm) (D)  
1.1 in (27mm) (D)  
Storage Media Management  
SD Card Capacity  
Recording Time  
1 GB  
2 GB  
8 GB  
16 GB  
130 minutes  
170 minutes  
1050 minutes  
2100 minutes  
Lithium-Polymer Battery Warning  
x The receiver contains a non-removeable rechargeable Lithium-Polymer  
battery.  
x Do not try to charge the battery in temperatures below 0° C (32° F) or higher  
than 45° C (113° F).  
x Dispose of this equipment according to the instructions.  
x Do not open the receiver or mutilate the battery.  
x The rechargeable battery contained in this receiver may explode if disposed of  
in a fire.  
x Do not short-circuit the battery.  
x Do not charge the rechargeable battery with any AC adapter other than the  
one provided. Using another adapter may damage the battery or cause the  
battery to explode.  
#
Rechargeable batteries must be recycled or disposed of properly.  
Recycling and Disposal Information  
x Do not dispose of electronic devices or any of their components (especially  
batteries and LCD displays) in your municipal trash collection.  
x Consult your local waste management authority or a recycling organization like  
Earth911.com to find an electronics recycling facility in your area.  
x If you are unable to locate proper recycling facilities in your area, please return  
this product to Uniden for recycling.  
17  
 
FCC Compliance Information  
Part 15 Compliance Statement  
This device complies with Part 15 of the FCC Rules. Operation is subjected to the  
following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with limits for a Class  
B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328.  
These limits are designed to provide reasonable protection against harmful  
interference in residential installations. This equipment generates, uses, and can  
radiate radio frequency energy, and if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause interference to radio or television  
equipment reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
x Reorient or relocate the receiving antenna.  
x Move the equipment away from the receiver.  
x Plug the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
x Consult the dealer or an experienced radio/television technician for additional  
suggestions.  
CAUTION! Any changes or modifications to this equipment not  
expressly approved by the party responsible for compliance could void  
your authority to operate the equipment.  
RF Exposure Information  
The antenna used for this transmitter must be installed to provide a separation  
distance of at least 20 cm (7.9”) from all persons and must not be collocated or  
operating in conjunction with any other antenna or transmitter.  
IC Compliance Information  
Radio Equipment Notice  
The term “IC:” before the radio certification number only signifies that Industry  
Canada technical specifications were met. Operation is subject to the following  
two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired  
operation of the device. “Privacy of communications may not be ensured when  
using this device”.  
CE Compliance Information  
Products with CE Marking comply with EMC Directive (2004/108/EC); low voltage  
Directive (73/23/EEC); R&TTE(1999/5/EC) issued by the Commission of the  
European Community. Compliance with these directives implies conformity to the  
following European Norms:  
x EMC: EN 301 489  
x LVD: EN 60950  
x Radio: EN 300 328  
18  
 
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”).  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail  
owner, this Uniden Product to be free from defects in materials & craftsmanship  
with only the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate  
& be of no further effect 12 months after the date of original retail sale. The  
warranty is invalid if the Product is (A) damaged or not maintained as reasonable  
or necessary, (B) modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C) improperly installed,  
(D) serviced or repaired by someone other than an authorized Uniden service  
center for a defect or malfunction covered by this warranty, (E) used in any  
conjunction with equipment or parts or as part of any system not manufactured  
by Uniden, or (F) installed or programmed by anyone other than as detailed by  
the owner’s manual for this product.  
STATEMENT OF REMEDY: In the event that the product does not conform to  
this warranty at any time while this warranty is in effect, warrantor will either, at  
its option, repair or replace the defective unit & return it to you without charge  
for parts, service, or any other cost (except shipping & handling) incurred by  
warrantor or its representatives in connection with the performance of this  
warranty. Warrantor, at its option, may replace the unit with a new or refurbished  
unit.  
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE  
WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES  
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER  
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,  
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES  
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow  
this exclusion or limitation of incidental or consequential damages so the above  
limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also  
have other rights which vary from state to state. This warranty is void outside the  
United States of America & Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner’s manual you are certain that the Product  
is defective, pack the Product carefully (preferably in its original packaging).  
The Product should include all parts & accessories originally packaged with the  
Product. Include evidence of original purchase & a note describing the defect that  
has caused you to return it. The Product should be shipped freight prepaid, by  
traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
1-800-658-8068  
1-817-858-2900  
19  
 
20  
 
21  
 
© 2012 Uniden America Corporation  
Printed in China.  
 

Technicolor Thomson Projector LP790 User Manual
Teledyne Table Top Game 05386D User Manual
The Helman Group Personal Computer C C P 5 1 0 User Manual
Timex Watch W111 User Manual
Toshiba DVD Player SD 5970SU User Manual
Trane Heat Pump 18 BC55D1 2 User Manual
TRENDnet Switch TEG S160TX User Manual
Tripp Lite Surge Protector SWIVEL6 User Manual
Ultra Products Fan ULT31422 User Manual
ViewSonic Flat Panel Television VS12120 1M User Manual