X-Finity™ 2G Power Supply
X-Finity 2G PSU - Featuring After Spin Technology
Specially designed for demanding, high end gaming systems, the X-Finity 2G
supplies up to 37A to the 12V rail. The 2G also features "After Spin Technology"
to help quiet the system and aid in prolonging the life of your components.
Connectors for chassis fans are thermostatically controlled; RPM's are reduced
when temperatures inside the case are low. PSU, chassis and CPU fan connectors
remain spinning several minutes after the PC is powered down allowing the
system to gradually cool down after use. The incomparable FlexForce cables are
dressed in a great looking titanium silver finish. Specially engineered cable
design promotes easy cable management and 30% better airflow than ordinary
cables by easily routing cable under the motherboard, behind drive bays...
anywhere that gets typically unsightly power supply cables out of the way of
airflow. 20/24-pin motherboard connection. 4-pin Molex connectors. 4-pin
floppy power connectors. PCI Express, SATA, 4-pin and 8-pin EPS connectors.
Versatile. Dependable. Affordable. The X-Finity FlexForce ATX power
supply.
Features
· Dual 80mm Fans
· Low Acoustic Noise
Featuring
· FlexForce Cabling Technology
· Connections Available
1 - 20/24 Pin Motherboard Connector
1 - 4/8 Pin +12V and EPS Connector
8 - 4 Pin Molex Connectors
OUTPUT
600 Watt
2 - 4 Pin Floppy Power Connectors
2 - PCI Express Connectors
4 - SATA Connectors
+3.3VDC
30A
+5VDC
25A
+12VDC
37A
-12VDC
+5VSB
Max Output
Current
0.6A
2.5A
1 - AST Controlled CPU Fan Connector
1 - AST Thermo-controlled Chassis Fan Connector
1 - PSU Fan RPM monitor Connector
· Meets ATX Version 2.03 and v1.2
· Short Circuit Protection
165 W
444 W
7.2 W
12.5W
Max Combined
Wattage
581 W
19.7 W
600 W
Total Output Power:
600W (Full Load, Nominal Input Voltage)
Efficiency:
79% Typical at Typical and Nominal Input Voltage
73% Typical at Full Load and Nominal Input Voltage
What is AST (After Spin Technology)?
After Spin Technology is used to quiet the system and aid in
prolonging the life of your components. Connectors for
chassis fans are thermostatically controlled; RPM's are reduced
when temperatures inside the case are low. PSU, chassis and
CPU fan connectors remain spinning several minutes after the
PC is powered down allowing the system to gradually cool down after use.
Input:
AC Input Voltage: 115V/230V
AC Input Frequency: 50-60Hz
AC Input Currents:
· 10A (RMS) for 115VAC input
· 6A (RMS) for 230VAC input
600 Watt X-Finity 2G - Titanium
Model: XF2G600TI Part #: ULT33120
UPC#: 022769331201
1-800-830-0051
Weight: 6 lbs. Dimensions: 6x6.75x3.5"
|