TSB-212
SUB-BASS LOUDSPEAKER
QUICK START GUIDE
Turbosound Ltd.
Star Road, Partridge Green
West Sussex RH13 8RY England
Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155
web: www.turbosound.com
Version 1.0 ©Turbosound 4/05
quick start
TSB-212
Placement
Single TSB-212 units can generally be placed
inconspicuously virtually anywhere in a room, and
in particular can be concealed under seating or in
custom-built enclosures. Locating the subwoofer
against a wall or in a corner is recommended.
mid-high amplifier
When using multiple subwoofers it is preferable
to stack these in a block in order to take advantage
of mutual coupling between units, which will
result in improved bass response and a lower cut-
off frequency. Speakon cable interconnects are
neatly routed at the rear of the box, allowing a
stack to be placed directly against a wall.
bass amplifier
bass amplifier
Speakon pin connections
The Speakons are wired as shown below
Speakon pin wiring
Pin 1+ positive
1+
Pin 1- negative
Pin 2+ N/C
2+
Pin 2- N/C
Back
Front
Technical Specifications
Dimensions
420mm x 1000mm x 470mm (16.5” x 39.4” x 18.5”)
47kgs (103.4lbs)
Net Weight
Frequency Response
Power Handling
Impedance
38Hz to 200Hz @±4dB (useful to 30Hz)
800 watts r.m.s., 1600 watts program
4 ohms nominal
Sensitivity
100dB, 1 watt @ 1 metre
Calc Max SPL
132dB continuous, 138dB peak
24dB/ocatve low-pass at 125Hz, 24dB/octave Butterworth
high-pass at 30Hz
Recommended Crossover
Construction
Rigging
15mm (5/8”) birch plywood
16 x M10 internal rigging points
TurboBlue or white semi-matt textured paint
Options
Spares & Accessories
LS-1220
RC-1220
12” LF driver
recone for LS-1220
TSB-212 quick start guide
Page 3
quick start
TSB-212
WARRANTY
Limited Warranty
This Turbosound loudspeaker product is warranted to the original end-user purchaser and all
subsequent owners for a period of two (2) years for loudspeakers from the original date of
purchase.
Warranty Coverage
Warranty coverage includes defects in materials and workmanship. It does not include:
•
•
damage caused by accident, misuse, abuse, neglect or modification by any person other
than an authorised Turbosound representative,
damage caused by failure to operate the product in accordance with the instructions
contained in the user manual,
•
•
•
damage occurring during shipment in transit,
claims based on any misrepresentation by the seller,
products which do not have the original components as specified in the product
engineering information,
•
products on which the serial number has been removed or defaced.
Shipping
Should any fault develop with a component of your Turbosound system, please return the
product, freight pre-paid, in its original packing carton, along with proof of purchase such as the
original bill of sale or receipted invoice, and a description of the suspected fault to Turbosound
Ltd. (Att: Customer Service), or your local authorised Turbosound representative. The product
serial number must be quoted in all correspondence relating to the claim. Insurance is
recommended, as Turbosound or its representatives are not liable for loss or damage in transit.
Turbosound will pay for return freight costs should repairs be covered under warranty.
Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK
TSB-212 quick start guide
Page 4
|