TSB-110
SUB-BASS LOUDSPEAKER
QUICK START GUIDE
Turbosound Ltd.
Star Road, Partridge Green
West Sussex RH13 8RY England
Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155
web: www.turbosound.com
Version 1.1 ©Turbosound 8/2008
quick start
TSB-110
Locate the four jumper locations on the circuit board, labelled J1, J2, J3, and J4. The unit is
shipped with J2 and J4 connected with J1 and J3 not connected (dual 4 ohm mode). For single 8
ohm operation unplug J2 and J4 and transfer the jumpers to J1 and J3. This connects the two
voice coils in series and transfers the input to the left input only (pins 1+ and 1- on the Speakon
NL4MP). Note: In single coil mode DO NOT use the right inputs and outputs as this will result in
incorrect operation and may damage loudspeakers and amplifiers.
TSB-110 Configured for 2 x 4 ohms
TSB-110 Configured for 8 ohms
J1
J3
J1
J3
J2 J4
J2 J4
Technical Specifications
Dimensions
330mm x 585mm x 330mm (13” x 23” x 13”)
16.5 kg (36.3 lbs)
Net weight
Frequency Response
Power Handling
Nominal Impedance
Sensitivity
45Hz to 180Hz
300 watts r.m.s., 600 watts program
2 x 4 ohms
95dB, 1 watt @ 1metre
Calc. Max SPL
Crossover
120dB continuous, 126dB peak
Built-in high pass crossover network at 150Hz
15mm (5/8”) birch plywood
4 x M10 internal rigging points
TurboBlue or white semi-matt textured paint
Construction
Rigging
Options
Spares & Accessories
LS-1019.2
RC-1019.2
10” LF driver (requires M5 x 35 fixing bolts)
recone kit
TSB-110 quick start guide
Page 3
quick start
TSB-110
WARRANTY
Limited Warranty
This Turbosound loudspeaker product is warranted to the original end-user purchaser and all
subsequent owners for a period of two (2) years for loudspeakers from the original date of
purchase.
Warranty Coverage
Warranty coverage includes defects in materials and workmanship. It does not include:
•
•
damage caused by accident, misuse, abuse, neglect or modification by any person other
than an authorised Turbosound representative,
damage caused by failure to operate the product in accordance with the instructions
contained in the user manual,
•
•
•
damage occurring during shipment in transit,
claims based on any misrepresentation by the seller,
products which do not have the original components as specified in the product
engineering information,
•
products on which the serial number has been removed or defaced.
Shipping
Should any fault develop with a component of your Turbosound system, please return the
product, freight pre-paid, in its original packing carton, along with proof of purchase such as the
original bill of sale or receipted invoice, and a description of the suspected fault to Turbosound
Ltd. (Att: Customer Service), or your local authorised Turbosound representative. The product
serial number must be quoted in all correspondence relating to the claim. Insurance is
recommended, as Turbosound or its representatives are not liable for loss or damage in transit.
Turbosound will pay for return freight costs should repairs be covered under warranty.
Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK
TSB-110 quick start guide
Page 4
|