Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: APSX750F
230V PowerVerter APS X Series Inverter/Charger - with Fast Auto-Transfer Switching
Highlights
12V DC or 230V AC input; 230V, 50 Hz output; 2 AC outlets
750 watts continuous, 1125 watts OverPower and 1500 watts DoubleBoost
inverter output (see specifications)
3-stage, selectable 5/20 amp, wet/dry cell battery charger
Faster Auto Transfer Switching option for battery backup/UPS operation
Reliability enhanced large-transformer design with protected DC terminals
Description
Tripp Lite's APSX750F DC-to-AC inverter with faster automatic line-to-battery transfer and integrated charging system serves as an extended run
UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V
battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and
DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold
start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected
equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts
and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals
for simple installation (user supplies batteries and cabling - see Owner's Manual for recommendations). Passes sine wave utility or generator power
during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current
needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous
status information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly
adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery
power transfer voltages.
Applications
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion
vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an
uninterruptible power supply (UPS) for items compatible with a 10 millisecond transfer time.
Package Includes
APSX750F Inverter/Charger
Owner's Manual with warranty information
(1) IEC Universal Outlet Adapter
Features
APSX750 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 230V AC output from a 230V AC line power source or 12V DC battery source
Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire.
Maximum input
amps / watts
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A
max charger-only/combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading.
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries.
12V
DC system voltage
Battery recharge rate Selectable 5/20 amp
LEDS ALARMS & SWITCHES
Front panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
SURGE / NOISE SUPPRESSION
AC surge
840 joules AC surge suppression included.
suppression
PHYSICAL
Shipping weight (lbs) 20
Shipping weight (kg)
9.1
Shipping
12.5 x 11 x 10.75
Dimensions (HWD/in)
Shipping
31.8 x 27.9 x 27.3
Dimensions
(HWD/cm)
Unit weight (lbs)
Unit weight (kg)
18.6
8.3
Unit Dimensions
(HWD/in)
7 x 8.75 x 9
Unit Dimensions
(HWD/cm)
17.8 x 22.2 x 22.8
Polycarbonate
Material of
construction
Form factors
supported
Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting
information)
Cooling method
Multi-speed fan
Style
Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and
networking equipment - verify transfer time compatibility of loads for UPS applications)
Low voltage transfer
to battery power
Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage
drops to 144V (user adjustable to 163, 182, 201V - see manual)
High voltage transfer In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272
to battery power
SPECIAL FEATURES
Appearance
Black color
Remote control
capability
Yes
BATTERY PACK ACCESSORY (optional)
Battery Pack
98-121 sealed lead acid battery (optional)
Accessory (optional)
CERTIFICATIONS
Certifications
WARRANTY
RoHS Compliant
Product Warranty
Period
(Outside the U.S. and Canada, call for warranty information)
Related Items
External Battery Housings
BP-260
Ideal battery housing for use with Tripp Lite PowerVerter APS inverter/charger systems with a Qty: [optional]
12 or 24V DC system voltage.
Replacement Batteries
98-121
12V DC Sealed, Maintenance-Free Battery - For all PowerVerter models which accept 12V
DC input
Qty: [optional]
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
©2009 Tripp Lite. All Rights Reserved.
|