Triarch Indoor Furnishings 29235 User Manual

ASSEMBLY INSTRUCTIONS FOR 29235  
Tree with  
loop  
Fixture body  
Coupling  
Knured nut  
Nipple  
Cap  
Leaves  
Finial  
1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.  
2. Turn power to the installation point OFF.  
3. Unravel the supply power and ground wires and pass the hole of tree with loop.  
4. Unfold the arm of fixture body to proper position.  
5. Make sure to remove the coupling, knurled and cage of fixture body before installing proper bulbs  
(not provided) to each socket inside the cage referring to the markings and labels on fixture for  
maximum wattage.  
6. Thread tree with loop onto the protruding nipple at top of fixture body.  
7. Thread the nipple into the coupling at the bottom of fixture body.  
8. Locate cap and leaves carefully, and place them over the nipple, secure with finial.  
9. Install proper bulbs (not provided) to the remaining sockets referring to the markings and labels  
on fixture for maximum wattage.  
10. Restore power to the installation point ON. Retain this sheet for future reference.  
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,  
CONSULT A LICENSED ELECTRICIAN!  
07.07  
 

Tatung Home Theater Screen TBM 0903 User Manual
Texas Instruments Computer Hardware DRV8811EVM User Manual
Toshiba CRT Television WLT66 User Manual
Toshiba Heat Pump A09 01P User Manual
TRENDnet Network Card TE100 P11 User Manual
Trion Humidifier 707 U User Manual
Ultratec Projection Television 43FDX10B User Manual
UNICOM Electric TV Converter Box VAA FMT1 TR User Manual
Varimixer Mixer W100PL User Manual
VXI Switch TuffSet CT Switch System User Manual