Triarch Indoor Furnishings 29230 1 User Manual

ASSEMBLY INSTRUCTIONS FOR 29230/1  
Ball nut  
Crossbar with  
screws  
Fixture body  
SIDE VIEW OF FIXTURE  
1. Before beginning assembly, carefully unpack and identify all parts referring to the illustration.  
2. Turn off power to the installation point OFF. Locate the crossbar and secure it to the outlet box in  
the wall with (2) outlet box screws.  
3. Make wires connections: (We recommend 2 people for this step) Locate and attach the house  
ground wire to the fixture ground wire. Proceed to attach both to the crossbar with green ground  
screw. Using wire connectors connect the house white wire to fixture white (or ribbed side) wire;  
connect the house black (or red) wire to the fixture black (or smooth side) wire.  
4. Carefully tuck all wires into the wall mounted outlet box and position the fixture over the outlet box.  
Align the holes in the back plate with the (2) mounting screws attached to the crossbar. Pass the  
fixture over the (2) mounting screws and secure by threading the (2) ball nuts onto ends of screws.  
Hands tighten until snug.  
5. Install a proper bulb (not provided) to the socket referring to the markings and labels on fixture for  
maximum wattage.  
6. Restore power to the installation point ON. Retain this sheet for future reference.  
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,  
CONSULT A LICENSED ELECTRICIAN!  
07/07  
 

Tektronix Car Amplifier 5B10N User Manual
TomTom GPS Receiver 1B00050 User Manual
Toshiba Cell Phone 803 User Manual
Toshiba Personal Computer PSAA9 User Manual
Trane Air Conditioner RTAC 140 400 ton units 50 HZ User Manual
Tricity Bendix Freezer UF406W User Manual
Tripp Lite Switch B004 VPA2 K R User Manual
U Line Air Conditioner ADA151M User Manual
Uniflame Gas Grill GBC940WIR User Manual
Vision Fitness Bicycle ET X6200HRT User Manual