Satellite® A20/A25 Series
Resource Guide
Keep this guide in a convenient place to access important
information about your computer.
If you need assistance, contact the following:
InTouch Center
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273
Please fill in for your reference and future use:
Model name _______________________________________
Model number _______________________________________
Serial number ______________________________________
3
Welcome to the world of powerful and portable multimedia computers!
With your new Toshiba notebook computer, your access to information can
accompany you wherever you go.
You will find that the Microsoft® Windows® XP operating system is
already installed on your computer. It offers exciting features and easy
Internet access.
This guide
This guide offers important information about your computer, including
solutions to the most common problems, and features and specifications.
For more detailed information, descriptions of other features and more
extensive troubleshooting guidelines, see the electronic user’s guide
preinstalled on your system. It is also available on the Web at
pcsupport.toshiba.com.
Safety icons
This guide contains safety instructions that must be observed in order to
avoid potential hazards that could result in personal injuries, damage to
your equipment, or loss of data. These safety cautions have been classified
according to the seriousness of the risk, and the icons highlight these
instructions as follows:
Danger indicates a hazardous situation, which will result in death, serious
personal injury, or substantial property damage if the safety instruction is
ignored.
DANGER
Warning indicates a hazardous situation, which can result in death, serious
personal injury, or substantial property damage if the safety instruction is
ignored.
Caution indicates a hazardous situation, which will or can cause minor
personal injury or property damage if the safety instruction is ignored.
Provides you with important but not hazard-related information.
Other icons used
Additional icons highlight other helpful or educational information:
TECHNICAL NOTE: This icon highlights technical information about the
computer.
Setting up your computer and getting started
4
HINT: This icon denotes helpful hints and tips.
DEFINITION: This icon indicates the definition of a term used in the text.
Other documentation
Your computer comes with all or some of the following documentation in
addition to this resource guide:
❖
❖
❖
❖
❖
Electronic user’s guide installed on your system.
Guides for other software that may come preinstalled.
Microsoft® Windows® XP operating system documentation.
For accessory information, visit Toshiba’s Web site at toshiba.com.
The Recovery Media containing the programs that are preinstalled at
the factory and any bundled software. Keep this media in a safe and
convenient place.
Setting up your computer and getting started
Strain and stress injuries are becoming more common as people spend
more time using their computers. With a little care and proper use of the
equipment, you can work comfortably throughout the day.
Using the computer keyboard incorrectly can result in discomfort and
possible injury. If your hands, wrists, and/or arms bother you while typing,
stop using the computer and rest. If the discomfort persists, consult a
physician.
For more information, consult books on ergonomics, repetitive-strain
injury, and repetitive-stress syndrome.
Placement of the computer
Proper placement of the computer and external devices is important to
avoid stress-related injuries. Consider the following when placing your
computer.
❖
Place the computer on a flat surface at a comfortable height and
distance. You should be able to type without twisting your torso or
neck, and look at the screen without slouching.
❖
❖
If you are using an external monitor, the top of the display should be
no higher than eye level.
If you use a paper holder, set it at about the same height and distance
as the screen.
Setting up your computer and getting started
5
Seating and posture
When using your computer, maintain good posture with your body relaxed
and your weight distributed evenly. Proper seating is a primary factor in
reducing work strain.
Precautions
Your notebook computer is designed to provide optimum safety and ease of
use, and to withstand the rigors of travel. You should observe certain
precautions to further reduce the risk of personal injury or damage to the
computer.
Never apply heavy pressure to the computer or subject it to sharp impacts.
Excessive pressure or impact can damage computer components or
otherwise cause your computer to malfunction.
Some PC Cards become hot with prolonged use. Overheating of a PC Card
can result in errors or instability in its operation.
Be careful when you remove a PC Card that has been used for lengthy
periods of time.
Connecting to a power source
Your computer requires power to operate. Use the power cable and AC
adapter to connect the computer to a live electrical outlet, or to charge the
computer’s battery.
Power cable
AC adapter
Power Cable and AC adapter
Use only the AC adapter supplied with your computer or an equivalent
adapter that is compatible. Use of any incompatible adapter could damage
your computer. Toshiba assumes no liability for any damage caused by use
of an incompatible adapter.
When you connect the AC adapter to the computer, always follow the steps in
the exact order as described in the User's Manual. Connecting the power
cable to a live electrical outlet should be the last step otherwise the adapter
DC output plug could hold an electrical charge and cause an electrical shock
or minor bodily injury when touched. As a general safety precaution, avoid
touching any metal parts.
Setting up your computer and getting started
6
Hold the power cable by its plug when you connect/disconnect it. Do NOT
pull the cable itself. Doing so may damage the power cable and result in a
short circuit or electric shock.
DANGER
The power cord on this product contains lead, a chemical known to
the State of California to cause birth defects or other reproductive
harm. Wash hands after handling.
To connect AC power to the computer:
1
2
3
Connect the power cable to the AC adapter.
Plug the AC adapter into the DC-IN on the back of the computer.
Connect the power cable to a live electrical outlet.
If the electrical outlet is live, the system indicator panel’s AC power light
) glows green.
(
Damaged power cables can cause fire or electric shock. Never modify,
forcibly bend, place heavy objects on top of, or apply heat to the power
cable.
DANGER
If the power cable becomes damaged or the plug overheats, discontinue use.
There is a risk of electric shock.
Never remove the power plug from the outlet with wet hands. Doing so may
cause an electric shock.
Connecting a printer
You can connect a USB-compatible printer to your computer through a
USB port. You can also connect a parallel printer through the parallel port.
To confirm a printer’s compatibility, check its documentation.
Connecting a USB printer
To achieve the connection, you need a suitable USB cable, which may
come with your printer. Otherwise, you can purchase one from a computer
or electronics store.
Follow the manufacturer’s instructions for connecting a USB printer to your
computer.
Connecting a parallel printer
To achieve the connection, you need a suitable cable, which may come with
your parallel printer. Otherwise, you can purchase one from a computer or
electronics store.
If you connect a parallel printer, do so before you turn on the computer.
Setting up your computer and getting started
7
Follow the manufacturer’s instructions for connecting a parallel printer to
your computer.
Installing additional memory (optional)
Before you install or remove a memory module, turn off the computer using
the Start menu. If you install or remove a memory module while the
computer is in Standby or Hibernation mode, data will be lost.
computer with a memory module in slot B only.
Your computer is equipped with two memory slots which can provide for
various memory configurations. When additional memory is added, or
original memory replaced, it is recommended that you use only compatible
memory. In the event original memory is replaced with invalid memory, the
system will beep and will not start up beyond the BIOS memory check. A
message will display. If this occurs, contact Toshiba’s support center. See
“Toshiba voice contact” on page 27.
HINT: To purchase additional memory modules, visit the Toshiba Web site at
toshiba.com.
Your computer comes with enough memory to run most of today’s popular
applications. You may want to increase the computer’s memory if you use
complex software or process large amounts of data.
There are two memory slots. Your system may have both slots occupied.
If you use the computer for a long time, the memory modules will become
hot. If this happens, let the modules cool to room temperature before you
replace them.
Do not try to install a memory module under the following conditions. You
can damage the computer and the module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM or multi-function drive has been turned on.
Do not install or remove a memory module while the DVD-ROM or multi-
function drive power is on.
Setting up your computer and getting started
8
You will need a standard Phillips No.1 screwdriver and a small flat head
screwdriver to install a memory module.
To avoid damaging the computer’s screws, use a standard Phillips
screwdriver that is in good condition.
1
If the computer is on, turn it off.
See “Turn Off or Shut down command” in your electronic user’s
guide.
2
3
Unplug and remove any cables connected to the computer.
Open the display panel and remove the panel above the keyboard that
contains the power button.
When removing the computer’s power button panel to install additional
memory, be careful not to damage the display or circuit board.
Using a flat-head screwdriver to pry off the panel
You can pry the panel out of its position by using a flat-head
screwdriver. Starting at the left or right side, carefully wedge the flat-
head screwdriver between the panel and the surrounding housing.
Grasp the end of the panel and lift up until the panel comes free.
4
Remove the three screws that hold the keyboard in place, and remove
the keyboard retaining brace.
Removing the left keyboard screw
Setting up your computer and getting started
9
The two-inch-long, propeller-shaped brace sits in the center of the
area exposed when the panel is removed.
Observe how the propeller-shaped keyboard retaining brace is positioned
before you remove it.
Store the brace with the screws for safekeeping.
Removing the right keyboard screw
5
Lift the keyboard and gently place it face down on the palm rest of the
computer.
Lifting the keyboard
Removing the keyboard exposes the two memory slots, which are
covered by a plastic sheet.
Covered memory slots
Locating the covered memory module slots
Setting up your computer and getting started
10
6
Lift (but do not detach) the plastic sheet to expose the memory slots.
Lifting the plastic covering the memory slots
7
Remove the new memory module from its antistatic packaging.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Avoid touching the connectors on the memory module or on the computer.
Grease or dust on the connectors may cause memory access problems.
8
Insert the memory module in a slot and gently press it down into
place.
Inserting the memory module
The clips on either side of the module will click to secure the module.
9
Cover the slots with the plastic sheet.
10 Replace the keyboard.
To secure the keyboard, fit the tabs at the bottom of the keyboard into
the corresponding slots at the top of the computer’s palm rest.
11 Fasten the keyboard with the keyboard retaining brace and screws.
Setting up your computer and getting started
11
12 Replace the panel above the keyboard by doing the following:
❖
Fit the tabs at the bottom of the panel into corresponding slots at
the top of the keyboard.
❖
Fit the tabs at the top of the panel into corresponding slots at the
base of the display and gently push down.
When the panel is properly positioned, it will snap down into place.
13 Reconnect any cables you removed.
14 Turn on the computer.
To verify that the computer correctly recognizes the memory, see
“Checking total memory” on page 12.
15 If the computer does not recognize the memory, shut down the
computer, remove the memory slot cover, and make sure the memory
module is seated properly, as described in step 8.
Removing a memory module
If you use the computer for a long time, the memory modules will become
hot. If this happens, let the modules cool to room temperature before you
replace them.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the device.
Do not remove the memory module while the computer is in Standby mode.
The computer could hang up the next time you turn it on and data in memory
will be lost. In either of the above cases, the Standby configuration will not
be saved.
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the following: Press
the power button and hold it down for five seconds, then turn the power on
again.
1
2
Follow steps 1 through 6 in “Installing additional memory (optional)”
on page 7.
Pull the clips away from the memory module.
The memory module pops partially out of the slot.
Setting up your computer and getting started
12
Pulling the clips away from the memory module
3
Carefully remove the module from the slot.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Avoid touching the connectors on the memory module or on the computer.
Grease or dust on the connectors may cause memory access problems.
Removing the memory module
4
Complete the procedure by following steps 9 through 14 in “Installing
additional memory (optional)” on page 7.
Checking total memory
When you add or remove memory, you can check that the computer has
recognized the change. To do this:
1
2
Click Start, Control Panel.
Click Performance and Maintenance.
Your computer’s TFT display
3
4
Click System.
The General tab view automatically appears and shows the
recognized memory.
5
If the computer does not recognize the memory, turn off the computer,
remove the memory slot cover, and make sure the memory module is
seated properly, as described in “Installing additional memory
(optional)” on page 7.
Your computer’s TFT display
Small bright dots may appear on your TFT display when you turn on your
computer. Your display contains an extremely large number of thin-film
transistors (TFT) and is manufactured using high-precision technology.
Any small bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
Inserting a PC Card
Use caution when lifting or turning your computer. Failure to do so may
result in damage to components, such as cables, attached to your computer,
or to the computer itself.
Before you insert a PC Card, refer to the documentation that comes with
the card to see if you need to do anything before you insert it.
1
If your PC Card does not support hot swapping, save your data and
turn off the computer before inserting the PC Card. For more
information, see “Hot swapping a PC Card” on page 14.
2
3
Hold the PC Card with the arrow or main label side up and the
connector side toward the PC Card slot.
Align the card connectors with the PC Card slot and carefully slide the
card into the slot until it locks into place.
Inserting a PC Card
To avoid damaging the PC Card or the computer, do not force the card into
the PC Card slot.
Removing a PC Card
14
Removing a PC Card
1
2
Click the Safely Remove Hardware icon on the System tray.
Click Safely remove xxxx, where xxxx is the identifier for your PC
Card.
The operating system advises you that you may safely remove the
Card.
3
Press the PC Card eject button next to the PC Card slot to extend the
button.
Ejecting the PC Card
4
5
Press the extended eject button so the PC Card pops out slightly.
Remove the PC Card and store it properly.
Hot swapping a PC Card
One of the great things about PC Cards is that you can replace one PC Card
with another while the computer is on. This is called “hot swapping.”
Hot swapping precautions
Although you can insert a PC Card at any time, to avoid data loss never
remove a card while it is in use. For example:
❖
❖
❖
Never remove an ATA card while the system is accessing it.
Never remove a network card while you are connected to a network.
Never remove a SCSI card while any of the SCSI devices connected to
it are operating.
Before removing a PC Card, shut it down properly. See “Removing a PC
Card” on page 14.
Using SD cards
Your computer supports the use of SD (Secure Digital) memory/input/
output cards. The cards can be used with a variety of digital products:
digital music players, cellular phones, PDAs, digital cameras, digital video
camcorders, etc.
Learning the basics
15
Inserting an SD card
MMC cards (multimedia cards) do not work in this slot.
1
2
Turn the card so that the metal contacts are face down.
Push the card into the slot until it locks in place.
Inserting an SD card
Removing an SD card
1
Click the Safely Remove Hardware icon on the System tray.
2
Click Safely remove xxxx, where xxxx is the identifier for your SD
card.
3
Press the card inward to release it.
The card pops out slightly.
4
Lift the side of the computer where the card is located, grasp the card,
and pull it straight out.
Learning the basics
Computing tips
❖
Save your work frequently.
Your work stays in the computer’s temporary memory until you save it
to the disk. You will lose all unsaved work, if, for example, a system
error occurs and you must restart your computer, or your battery runs
out of charge while you are working. Your computer can be
configured to warn you when the battery is running low.
HINT: Some programs have an automatic save feature that you can turn on.
This feature saves your file to the hard disk at preset intervals. See your
software documentation for details.
❖
Back up your files to diskettes (or other removable storage media) on
a regular basis. Label the backup copies clearly and store them in a
safe place.
Playing a CD or DVD
16
❖
❖
Scan all new files for viruses.
Never turn off the computer if a drive indicator light indicates a drive
is active.
The Windows® XP operating system records information, such as your
desktop setup, during its shutdown procedure. If you do not let the operating
system shut down normally, details such as new icon positions may be lost.
Using the TouchPadTM
The TouchPad, the touch-sensitive cutout in front of the keyboard, enables
you to move the cursor by brushing your finger on the surface in the
direction you want the cursor to move. To move the cursor to the top of the
screen, move your finger on the TouchPad away from you. To move the
cursor to the bottom, do the opposite.
For more information on the TouchPad, see the electronic user’s guide.
Primary and secondary control buttons
When you want to click or choose an item, use the TouchPad to move the
pointer/cursor to the item. Once the pointer/cursor is positioned, you can
click it into place by either double-tapping the TouchPad or clicking the
control buttons.
The control buttons are adjacent to the TouchPad and are used like the
buttons on a mouse. The primary control button is the left one and
corresponds to the left mouse button. To double-click, press the primary
button twice in rapid succession.
The function of the secondary button depends on the program you are
using. It usually corresponds to the right mouse button. Check your
program’s documentation to find whether it uses the secondary mouse
button.
Playing a CD or DVD
Optical storage has become the preferred medium for software, music, and
video. Digital versatile discs (DVDs) provide a significant increase in data
storage and support features that are not available on any other video
platform. These features include wide-screen movies, multiple language
tracks, digital surround sound, multiple camera angles, and interactive
menus.
For these reasons, your computer may come with a DVD-ROM or
multi-function drive.
HINT: Your DVD-ROM or multi-function drive is designed to play region 1
(North America) DVD-ROMs.
Playing a CD or DVD
17
For optimum DVD performance, it is recommended that you play DVDs
while running the computer on AC power.
Drive components and control buttons
The DVD-ROM or multi-function drive is located on the side of the
computer. The CD/DVD control buttons are located at the front edge of the
computer and can be accessed when the display panel is closed or open.
Components
Manual eject button
Eject button
Sample DVD-ROM or multi-function drive shown
Use the eject button to release the disc tray. This button requires power to
operate.
Never press the eject button or turn off the computer while the disk/disc
activity light is flashing. Doing so could damage the disc or the drive.
The manual eject button allows you to manually open the disc tray when
power to the computer and the drive is off.
Never use a pencil to press the manual eject button. Pencil lead can break off
inside the computer and damage it. Instead, use a slim object such as a
straightened paper clip.
Inserting a disc
Before playing an audio CD or a DVD, turn down the volume. Playing the
disc at maximum volume could damage your ears. To turn down the volume,
use the volume control dial or access the Volume Control program (click
Start, All Programs, Accessories, Entertainment, Volume
Control).
1
If the computer is turned on, press the eject button on the DVD-ROM
or multi-function drive.
The disc tray partially opens.
To avoid damaging a disc or losing data, check that the Disk/disc activity
light is off before opening the disc tray.
Playing a CD or DVD
18
2
3
Grasp the disc tray and pull it fully open.
Hold the disc by its edges and check that it is clean and free of dust.
Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its
center hole and edge. If you handle the disc incorrectly, you could lose data.
4
Carefully place the disc in the empty tray with its label facing up.
Inserting a disc
Be careful not to touch the drive’s lens (located underneath the drive’s
spindle) or the area around it. Doing so could cause the drive to malfunction.
5
Gently press the center of the disc onto the spindle until it locks.
Make sure the disc is properly positioned on the spindle. If you position the
disc incorrectly, it can jam the disc tray.
6
Close the disc tray by pressing gently on the center of the tray until it
clicks, indicating that it is locked.
Removing a disc with the computer on
Never press the eject button while the computer is accessing the drive. Wait
for the disk/disc activity light on the system indicator panel to turn off before
opening the disc tray.
1
Locate and press the eject button.
The disc tray partially opens.
2
3
Grasp the sides of the disc tray and pull it fully open.
Remove the disc from the disc tray and place it in its protective cover.
If the disc is spinning when you open the disc tray, wait for the disc to stop
before removing it.
4
Close the disc tray by pressing gently on the center of the tray until it
clicks indicating that it is locked.
Moving the computer
19
Removing a disc with the computer off
1
Insert a slender object, such as a straightened paper clip, into the
manual eject button access hole.
Never use a pencil to press the manual eject button. Pencil lead can break off
inside the computer and damage it.
2
3
Pull the tray fully open, remove the disc and place it in its protective
cover.
Close the disc tray by pressing gently on the center of the tray until it
clicks indicating it is locked.
Moving the computer
Before moving your computer, even across the room, make sure all disk
activity has ended (the drive-in-use lights stop flashing) and all external
peripheral cables are disconnected.
Never pick up the computer by its display panel or by the back (where the
ports are located).
Mobile computing
Running the computer on battery power
The computer contains a removable lithium ion (Li-ion) high-capacity
battery that provides power when you are away from an AC outlet. You can
recharge it many times.
To ensure that the battery maintains its maximum capacity, operate the
computer on battery power at least once a month until the battery is fully
discharged. Please see “Maximizing battery life” on page 23 for
procedures. If the computer is continuously operated on AC power, either
through an AC adapter or a docking station for an extended period (more
than a month), the battery may fail to retain a charge. It may not function
efficiently over the expected life of the battery and the battery light may not
indicate a low-battery condition.
Monitoring battery power
The battery light indicates the main battery’s current charge. It:
❖
❖
Glows green when the battery is fully charged
Glows amber while the battery is being charged
Mobile computing
20
❖
Does not glow if the external power source is disconnected or if the
battery is completely discharged
TECHNICAL NOTE: The computer drains the battery faster at low
temperatures. Check your remaining charge frequently if you are working in
temperatures below 50 degrees Fahrenheit.
The computer calculates the remaining battery charge based on your current
rate of power use and other factors such as the age of the battery.
Setting battery alarms
Your computer can be configured to warn you when the battery is running
low. For more information, see “Setting battery alarms” in the electronic
user’s guide.
Changing the main battery
When your battery power is running low, you have two options: connect the
computer to an AC power source or install a charged battery.
If your battery discharges fully, your information will be lost. Be sure to save
your work often.
When handling a battery, be careful not to drop it or short-circuit its
terminals. Also, do not drop, hit or otherwise impact the battery. Do not
scratch or break the casing and do not twist or bend the battery.
Do not remove the battery while the computer is in Standby mode. Data in
memory will be lost.
Removing the battery from the computer
1
Save your work.
2
Turn off the computer via the Start menu.
See “Using Turn Off or Shut down” in your electronic user’s guide.
Remove all cables connected to the computer.
Close the display panel and turn the computer upside down.
3
4
5
Move the battery lock lever toward the front of the computer in order
to move the battery release latch.
Mobile computing
21
Battery lock lever
Moving the battery lock lever
6
Slide the battery release latch to free the battery, then firmly pull the
battery toward yourself.
Battery release latch
Sliding the battery release latch
Removing the battery
If the battery is leaking or its case is cracked, put on protective gloves to
handle it, and discard it immediately following the advice in “Disposing of
used batteries safely” in the electronic user’s guide.
For environmental reasons, do not throw away a spent battery. Please return
spent batteries to your Toshiba dealer.
Mobile computing
22
Inserting a charged battery
1
Turn off the computer via the Start menu.
See “Using Turn Off or Shut down” in your electronic user’s guide.
Remove all cables connected to the computer.
2
3
4
Close the display panel and turn the computer upside down.
Insert the battery until it is level with the rest of the computer’s
underside
When the battery is properly secured, the battery release latch snaps
shut.
5
Move the battery lock lever toward the back of the computer to secure
the battery release latch.
Failure to lock the battery cover can result in the battery falling out of the
computer case.
6
7
8
Turn the computer right side up.
Reconnect any cables you removed.
Turn on the computer.
Battery safety precautions
❖
If the battery pack produces an odor, overheats or changes color or
shape while it is being used or charged, turn off the computer’s power
immediately and disconnect the power cord from the power socket.
Carefully remove the battery pack from the computer.
❖
❖
Do not try to disassemble a battery pack.
Do not overcharge or reverse charge a battery. Overcharging will
shorten its life, and reverse charging could damage it.
❖
Avoid touching the metal terminals of the battery with another metal
object. Short-circuiting the battery can cause it to overheat and may
cause damage to the battery or the computer.
❖
❖
❖
❖
Do not incinerate a spent battery, as this could cause it to explode and
release toxic materials.
If a battery is leaking or damaged, replace it immediately. Use
protective gloves when handling a damaged battery.
To replace the main battery, use an identical battery that you can
purchase through toshiba.com.
A reverse polarity condition should be avoided with all batteries. The
main battery is designed so that it cannot be installed to cause reverse
polarity.
❖
Charge the battery only in the computer or in a battery charger
designated as an approved option.
Mobile computing
23
❖
❖
When you install the battery, you should hear a click when it is seated
properly.
Do not expose the battery to fire. The battery could explode.
Maximizing battery life
A main battery can be recharged many times. Battery life and charge time
vary depending on the applications, power management settings and
features used. To maximize the life of your battery:
❖
At least once a month, disconnect the computer from a power source
and operate it on battery power until the battery fully discharges.
Before doing so, follow the steps below:
1
2
Turn off the computer’s power.
Disconnect the AC adapter and turn on the computer’s power. If
it does not turn on, go to step 4.
3
Operate the computer on battery power for five minutes. If the
battery has at least five minutes of operating time, continue
operating until the battery is fully discharged. If the battery light
flashes or there is some other warning to indicate a low battery,
go to step 4.
4
Connect the AC adapter to the computer and the power cable to a
power outlet. The DC-IN (if applicable to your system) or AC
power light should glow green, and the battery light should glow
amber to indicate that the battery is being charged. If the DC-IN
or AC power light indicator does not glow, power is not being
supplied. Check the connections to the AC adapter and power
cable.
5
Charge the battery until the battery light glows green.
❖
❖
If you have extra batteries, rotate their use.
If you will not be using the system for an extended period (more than
one month), remove the battery.
❖
❖
❖
Disconnect the AC adapter when the battery is fully charged.
Overcharging makes the battery hot and shortens life.
If you are not going to use the computer for more than eight hours,
disconnect the AC adapter.
Store spare batteries in a cool dry place out of direct sunlight.
Important information on your Satellite® computer’s cooling fan
24
Important information on your Satellite® computer’s
cooling fan
The CPU cooling fan on the underside of your Satellite computer cools the
CPU by drawing outside air into the computer.
To prevent possible overheating of the CPU, make sure the cooling fan's air
intake is not blocked. The fan draws in air by creating a vacuum. If the fan is
blocked, it could cause the CPU to run at a lower performance level or cause
the computer to shut down. Loose items such as notebook and tissue paper,
plastic wrappers, or other similar materials can block the air intake,
preventing air from reaching the CPU. Do not use the computer on surfaces
with objects that can be drawn in by the cooling fan.
CPU
cooling
fan
Underside of your Satellite computer
If something goes wrong
Problems that are easy to fix
Your program stops responding.
If you are working with a program that suddenly freezes all operations,
chances are the program has stopped responding. You can exit the failed
program without shutting down the operating system or closing other
programs.
To close a program that has stopped responding:
1
2
Press Ctrl, Alt, and Del simultaneously (once).
Click the Applications tab.
If a program has stopped responding, the words “not responding”
appear beside its name in the list.
3
4
Select the program you want to close, then click End Task.
Closing the failed program should allow you to continue working. If it
does not, continue with step 4.
Close the remaining programs one by one by selecting the program
name, then End Task.
If something goes wrong
25
5
Turn off your computer according to the instructions in “Turn Off or
Shut down command” in your electronic user’s guide.
Your program performs an illegal operation.
If you receive the message, “Your program has performed an illegal operation,”
you should record the details of the message and consult the software
manufacturer.
To record the details, click the Details button and copy the text the
operating system displays. The Details button displays information that the
software manufacturer needs to help you solve your problem.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cable properly or
installed a charged battery.
Press and hold down the power button until the on/off light changes to
green.
If you are using the AC adapter, check that the wall outlet is working by
plugging in another device, such as a lamp.
The computer starts but, when you press a key, nothing
happens.
You probably have a software or resource conflict. To clear the condition,
press Ctrl, Alt and Del simultaneously, then select Shutdown and Restart.
Clearing the condition may get the computer running, but it will not solve a
resource conflict. Read the documentation that came with the conflicting
device and “Resolving a hardware conflict” in the electronic user’s guide.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numeric keypad or cursor control light
is on, press Fn and F10 simultaneously to turn off the cursor control light or
press Fn and F11 simultaneously to turn off the numeric keypad light.
If the problem occurs when both the keypad overlays are off, make sure the
software you are using is not remapping the keyboard. Refer to the
software’s documentation and check that the program does not assign
different meanings to any of the keys.
Display problems
The display is blank.
Display Auto Off may be in effect. Press any key to activate the screen.
You may have activated the instant password feature by pressing Fn and F1
simultaneously.
If you have registered a password, press the Enter key, type the password
and press Enter. If no password is registered, press Enter. The screen
reactivates and allows you to continue working.
If something goes wrong
26
If you are using the built-in screen, make sure the display priority is not set
for an external monitor. To do this, hold down Fn and continue to press F5
until the display priority is not the external monitor.
Small bright dots appear on your TFT display when you turn
on your computer.
Your display contains an extremely large number of thin-film transistors
(TFT) and is manufactured using high-precision technology. The small
bright dots that appear on your display are an intrinsic characteristic of the
TFT manufacturing technology.
PC Card problems
PC Card checklist
❖
Make sure the card is inserted properly into the slot.
See “Using a PC Card” in the electronic user’s guide.
❖
❖
Make sure all cables are securely connected.
Occasionally a defective PC Card slips through quality control. If
another PCMCIA-equipped computer is available, try the card in that
machine. If the card malfunctions again, it may be defective.
Here are some common problems and their solutions:
Resolving PC Card problems
The slot appears dead and cards that worked no longer do.
Check the PC Card status:
1
2
Click Start.
Click My Computer icon with the secondary button, then click
Properties.
The System Properties window appears.
Click the Hardware tab.
3
4
5
6
Click the Device Manager button.
Double-click the appropriate category for the PC Card being used.
Double-click the name of the PC Card device.
The operating system displays your PC Card’s Properties window,
which contains information about your PC Card configuration and
status.
The computer stops working (hangs) when you insert a PC
Card.
Remove the PC Card. If removing the PC Card does not resolve the
problem, try restarting the computer. If the computer still does not work,
contact the PC Card’s manufacturer.
If you need further assistance
27
If you need further assistance
If you have followed the recommendations in this chapter and are still
having problems, you may need additional technical assistance. This
section contains the steps to take to ask for help.
Before you call
Since some problems may be related to the operating system or the
program you are using, it is important to investigate other sources of
assistance first.
Try the following before contacting Toshiba:
❖
Review the troubleshooting information in your operating system
documentation.
❖
If the problem occurs while you are running a program, consult the
program’s documentation for troubleshooting suggestions. Contact
❖
Consult the dealer from whom you purchased your computer and/or
program. Your dealer is your best source for current information.
selecting your particular product and model number, clicking GO, and then
clicking the Detailed Specs link from the menu on the left. Or just refer to
the computer documentation shipped with your product.
For the number of a Toshiba dealer near you, see “Toshiba voice contact”
on page 27.
Contacting Toshiba
If you still need help and suspect that the problem is hardware-related,
Toshiba offers a variety of resources to help you.
Start with accessing Toshiba on the Internet using any Internet browser by
typing pcsupport.toshiba.com.
Toshiba voice contact
Before calling Toshiba, make sure you have:
❖
❖
❖
❖
Your computer’s model and model number.
Your computer’s serial number.
The computer and any optional devices related to the problem.
Backup copies of your operating system and all other preloaded
software on diskettes or CD-ROM.
❖
Name and version of the program involved in the problem along with
its installation diskettes or CD-ROM.
❖
❖
Information about what you were doing when the problem occurred.
Exact error messages and when they occurred.
Power cable connectors
28
For technical support, call the Toshiba InTouch Center:
❖
❖
Within the United States at (800) 457-7777
Outside the United States at (949) 859-4273
Power cable connectors
Your notebook computer features a universal power supply you can use
worldwide. This appendix shows the shapes of the typical AC power cable
connectors for various parts of the world.
USA and Canada
(UL and CSA
approved)
United Kingdom
(BS approved)
Australia
(AS approved)
Europe
(VDA and
NEMKO approved)
Features and specifications
This section lists the computer’s features.
Technology and processor
Microprocessor
Intel® Pentium® 4 processor 2.53, 2.66, 2.80, 3.06 GHz,
1.475, 1.500, 1.525 V/core
CPU performance in your computer product may vary
from specifications under the following conditions:
- use of certain external peripheral products
- use of battery power instead of AC power
- use of certain multimedia games or videos with special
effects
- use of standard telephone lines or low speed network
connections
- use of complex modeling software, such as high end
computer aided design applications
- use of computer in areas with low air pressure (high
altitude >1,000 meters or >3,280 feet above sea level)
Features and specifications
29
- use of computer at temperatures outside the range of 5°C
to 35°C (41°F to 95°F) or >25°C (77°F) at high altitude
(all temperature references are approximate).
CPU performance may also vary from specifications due
to design configuration.
Under some conditions, your computer product may
automatically shut-down. This is a normal protective
feature designed to reduce the risk of lost data or damage
to the product when used outside recommended
conditions. To avoid risk of lost data, always make back-
up copies of data by periodically storing it on an external
storage medium. For optimum performance, use your
computer product only under recommended conditions.
Read additional restrictions under “Environmental
Conditions” in this document. Contact Toshiba Technical
Service and Support for more information.
Processor L1 cache
Processor L2 cache
12 KB write-back level one cache
512 KB on-chip write-back level two cache
Processor system bus 533 MHz PSB provides optimum speed for memory
access.
PCI bus
High performance 32-bit PCI system bus supports HDD
and PC Card slot
Memory
2.5-volt 64-bit bus, PC2100 DDR SDRAM, delivers high
performance, 2 SODIMM memory slots,
Memory modules available: 128 MB, 256 MB, 512 MB
Maximum capacity 1024 MB
Graphics
Trident CyberALADDiN-P4 64-bit graphics accelerator;
BitBLT hardware, Alpha-blending, Direct3D® and
OpenGL® support; 32 MB external DDR video memory
Power
Computer
90 watt autosensing external AC power adapter; 100-240
VAC input voltage, 50/60 Hz frequency, 15V output
voltage, 6.0 amps maximum current
Features and specifications
30
Main battery
Removable, rechargeable lithium ion (Li-Ion) high-
capacity battery (8,400 mAh, 10.8V x 12 cell)
Battery life is up to 3.0 hours*
Battery recharge time is several hours*
*Battery life may vary depending on product model,
configuration, applications, power management settings
and features utilized. Recharge time varies depending on
usage. Battery may not charge while computer is
consuming full power. After a period of time, the battery
will lose its ability to perform at maximum capacity and
will need to be replaced. This is normal for all batteries.
To purchase a new battery pack, see the accessories
information that shipped with your computer or visit the
These models achieved the battery life times shown using
Ziff Davis Media Inc.’s Business Winstone® 2002
BatteryMarkTM Version 1.0. These tests were performed
without independent verification by the VeriTest testing
division of Lionbridge Technologies, Inc. (“VeriTest”).
Neither Ziff Davis Media Inc. nor VeriTest makes any
representations or warranties as to the results of the tests.
Winstone® is a registered trademark and BatteryMarkTM is
a trademark of Ziff Davis Publishing Holdings Inc. in the
U.S. and other countries. Copyright 2002 Ziff Davis
Media Inc. All Rights Reserved. A description of the
environment under which the tests were performed is
product, family and model number, clicking GO, and then
clicking on the “Detailed Specs” link from the menu on
the left.
RTC battery
Li-Ion battery provides power for the internal real-time
clock and calendar
TECHNICAL NOTE: The RTC battery does not charge while the computer is turned
off even when AC power is attached.
Intelligent power
supply
Detects low battery charge and displays the battery charge
remaining or time remaining
Storage capacity
Hard disk
2.5-inch drive and controller provide non-volatile storage
for 30, 40, 60 or 80 GB (GB means 1 billion bytes)
Features and specifications
31
Ports
S-video port
Lets you connect the computer to an external NTSC/PAL
video device such as a standard television
Line-in jack
DC-IN
Allows you to connect your computer to an external audio
source to play or record sounds
Lets you connect the computer to AC power, using the AC
adapter and power cable
Headphone jack
Use the 3.5 mm headphone jack to connect stereo
headphones or other audio output devices. Connecting
headphones or other devices to this jack automatically
disables the internal speakers
Microphone in jack
RGB (monitor) port
Modem port
3.5 mm jack lets you connect an external monaural
microphone
15-pin, analog VGA port lets you connect an external
SVGA monitor (color or monochrome)
The modem port lets you connect the internal modem
directly to a telephone line via an RJ11 connection
USB 2.0 ports
LAN port
Support USB peripherals
The LAN port lets you connect to a LAN via an RJ45
connection
Parallel port
The parallel port lets you connect a parallel printer
Standard hardware
Memory
The system may come with 256 MB up to a maximum of
1024 MB of RAM
Display options
15.0-inch XGA (measured diagonally) active matrix Thin
Film Transistor (TFT) color LCD displays up to 16 million
colors at 640 x 480 expansion image, 800 x 600 expansion
image; 1024 x 768; 1280 x 1024 virtual display, 1600 x
1200 virtual display
15.0-inch SXGA+ (measured diagonally) active matrix
Thin Film Transistor (TFT) color LCD displays up to
16 million colors at 640 x 480 expansion image, 800 x 600
expansion image, 1024 x 768 expansion image,
1280 x 1024 expansion image; 1400 x 1050; 1600 x 1200
virtual display
Features and specifications
32
Communication
Integrated V.92 56K* modem
For more detailed information regarding your system’s
V.92 56K modem, visit the Toshiba Web site at
toshiba.com.
*Due to FCC limitations, speeds of 53 kbps are the maximum
permissible rates during downloads. Actual data transmission
speeds will vary depending on on-line conditions.
Networking
Keyboard
Integrated Intel 10/100 Base-TX Ethernet LAN adapter
with RJ45 port
Enhanced 85-key keyboard includes embedded numeric
and cursor control overlays, dedicated cursor control keys,
and Windows® special keys
Pointing device
PC Card slot
TouchPad provides the function of a mouse or other
pointing device
One PC Card slot lets you install one Type II PC Card
Minimum slot thickness: 5 mm
SD card slot
The SD card slot holds an SD card
Sound controller
Software Sound, 16-bit stereo; built-in stereo speakers; full
duplex sound, DirectSound®, Direct3D®Sound,
DirectMusic®
Optional accessories and devices
This section lists factory-installed options that are only available at the time
of order.
Wireless
communication
The computer may come with an optional integrated Wi-Fi
(802.11b or 802.11a/b) wireless LAN mini PCI
communication module providing wireless LAN
functions.
To install the Wi-Fi option at a later time, contact your Toshiba Authorized
Service Provider.
3.5-inch diskette drive External USB drive accommodates 1.44 MB, high-density
module
(2HDD) diskettes
Additional
batteries
Use as spare or replacement packs to extend the time you
can operate the computer away from a live electrical outlet
Cable
PORT-Noteworthy® Computer Lock cable to deter
computer theft
Features and specifications
33
DVD-ROM drive
24x CD-ROM, 8x DVD-ROM
Compatibility: CD-ROM, CD-R (read only), CD-RW
(read only), DVD-ROM, DVD-R (read only)
DVD-ROM/
CD-RW drive
24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD-ROM
Compatibility: CD-ROM, CD-R (read/write), CD-RW
(read/rewrite), DVD-ROM, DVD-R (read only), DVD-RW
(read only), DVD-RAM (read only)
DVD-R/RW drive
16x CD-R, 10x CD-RW, 1x DVD-R, 1x DVD-RW
Compatibility: CD-R (read/write), CD-RW (read/rewrite),
CD-ROM, DVD-ROM, DVD-R (read/write), DVD-RW
(read/write), DVD-RAM (read only)
DVD Multi drive
(when available)
16x CD-R, 10x CD-RW, 2x DVD-R, 2x DVD-RAM,
1x DVD-RW
Compatibility: CD-R (read/write), CD-RW (read/rewrite),
CD-ROM, DVD-ROM, DVD-R (read/write), DVD-RW
(read/write), DVD-RAM (read only)
Hard disk drive
2.5-inch drive provides non-volatile storage for
30 GB, 40 GB, 60 GB or 80 GB (GB means 1 billion
bytes)
Physical dimensions
This section lists the computer’s specifications
Weight
Size
7.9 pounds
width x depth x height
13.4 inches x 11.6 inches x 1.9 inches
Environmental conditions
Operating
Non-operating
Temperature
5° to 35° C (41° to 95° F)
-20° to 65° C (-4° to 149° F)
Relative humidity
20% to 80% non-condensing 10% to 95% non-condensing
Altitude
(relative to sea level)
-60 to 3,000 m
(-197 ft. to 9,842 ft.)
10G
-60 to 10,000 m
(-197 ft. to 32,808 ft.)
Shock
60G
1G
Vibration
0.50G
Regulatory information
34
Regulatory information
Model: Satellite ® A20/A25 Series
ReWritable CD/DVD Drives
The computer system you purchased may include a ReWritable CD and/or
DVD drive(s), among the most advanced data storage technologies
available. As with any new technology, you must read and follow all set-up
and usage instructions in the applicable user guides and/or manuals
enclosed. If you fail to do so, this product may not function properly and
you may lose data or suffer other damage. TOSHIBA AMERICA
INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND
SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE
PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU
AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS
SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS
OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR
RESULTING FROM THE USE OF THE PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY THEREOF.
Protection of Stored Data
For your important data, please make periodic back-up copies of all the
data stored on the hard disk or other storage devices as a precaution against
possible failures, alteration, or loss of the data. IF YOUR DATA IS
ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR
MALFUNCTION OF THE HARD DISK DRIVE OR OTHER
STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED,
TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS
OF DATA, OR ANY OTHER DAMAGE RESULTING
THEREFROM. WHEN COPYING OR TRANSFERRING YOUR
DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA
HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO
COPY OR TRANSFER THE DATA CORRECTLY.
Critical Applications
The computer you have purchased is not designed for any “critical
applications.” “Critical applications” means life support systems, medical
applications, connections to implanted medical devices, commercial
transportation, nuclear facilities or systems or any other applications where
product failure could lead to injury to persons or loss of life or catastrophic
property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES
AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY
ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN
ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER
Regulatory information
35
PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT
TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.
FCC Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
❖
❖
❖
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
❖
Consult the dealer or an experienced radio/TV technician for help.
Only peripherals complying with the FCC Class B limits may be attached to
this equipment. Operation with noncompliant peripherals or peripherals not
recommended by Toshiba is likely to result in interference to radio and TV
reception. Shielded cables must be used between the external devices and
the computer's or expansion unit’s serial port, parallel port, monitor port,
USB port, PS/2® port, i.LINK® port and microphone jack. Changes or
modifications made to this equipment not expressly approved by Toshiba or
parties authorized by Toshiba could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
❖
❖
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
Contact:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd.
Irvine, CA 92618-1697
(949) 583-3000
Regulatory information
36
Industry Canada Requirement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003
du Canada.
FCC Requirements
The following information is pursuant to FCC CFR 47, Part 68 and refers
to internal modems.
Installation
When you are ready to install or use the modem, call your local telephone
company and give them the following information:
❖
The telephone number of the line to which you will connect the
modem.
❖
❖
The FCC registration number of the modem.
The ringer equivalence number (REN) of the modem, which is 0.6B.
The modem connects to the telephone line by means of a standard jack
called the USOC RJ11C.
Type of Service
Your modem is designed to be used on standard-device telephone lines.
Connection to telephone company-provided coin service (central office
implemented systems) is prohibited. Connection to party lines service is
subject to State tariffs. If you have any questions about your telephone line,
such as how many pieces of equipment you can connect to it, the telephone
company will provide this information upon request.
Telephone Company Procedures
The goal of the telephone company is to provide you with the best service it
can. In order to do this, it may occasionally be necessary for them to make
changes in their equipment, operations or procedures. If these changes
might affect your service or the operation of your equipment, the telephone
company will give you notice, in writing, to allow you to make any changes
necessary to maintain uninterrupted service.
If Problems Arise
If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to
the telephone network. If the telephone company notes a problem, they
may temporarily discontinue service. When practical, they will notify you
in advance of this disconnection. If advance notice is not feasible, you will
be notified as soon as possible. When you are notified, you will be given
the opportunity to correct the problem and informed of your right to file a
complaint with the FCC. In the event repairs are ever needed on your
modem, they should be performed by Toshiba Corporation, Toshiba
Regulatory information
37
America Information Systems, Inc. or an authorized representative of
Toshiba.
Disconnection
If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this
change.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful to use
a computer or other electronic device to send any message via a telephone
fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the
date and time it is sent and an identification of the business, other entity or
individual sending the message and the telephone number of the sending
machine or such business, other entity or individual.
In order to program this information into your fax modem, you should
complete the setup for your fax software before sending a message.
Instructions for IC CS-03 certified equipment
1
NOTICE: The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
Caution: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
Regulatory information
38
2
The user manual of analog equipment must contain the equipment’s
Ringer Equivalence Number (REN) and an explanation notice similar
to the following:
The Ringer Equivalence Number (REN) of this device can be found
on the label affixed to your computer.
NOTICE: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
3
The standard connecting arrangement (telephone jack type) for this
equipment is jack type(s): USOC RJ11C.
Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any wireless LAN product that is based on Direct
Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:
❖
The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as
defined and approved by the Institute of Electrical and Electronics
Engineers.
❖
The Wireless Fidelity (WiFi) certification as defined by the WECA
Wireless Ethernet Compatibility Alliance.
Caution
Bluetooth™ and Wireless LAN devices operate within the same radio
frequency range and may interfere with one another. If you use
Bluetooth™ and Wireless LAN devices simultaneously, you may
occasionally experience a less than optimal network performance or even
lose your network connection.
If you should experience any such problem, immediately turn off either one
of your Bluetooth™ or Wireless LAN.
europe.com/computers/tnt/bluetooth.htm in Europe or
information.
Caution
This device is restricted to indoor use due to its operation in the 5.15 to
5.85 GHz frequency range.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN
Regulatory information
39
devices however is far much less than the electromagnetic energy emitted
by wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in
radio frequency safety standards and recommendations, TOSHIBA
believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be
restricted by the proprietor of the building or responsible representatives of
the organization. These situations may for example include:
❖
❖
Using the Wireless LAN equipment on board of airplanes, or
In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices
in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use the Wireless LAN device prior to
turning on the equipment.
Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in
strict accordance with the manufacturer’s instructions as described in the
user documentation that comes with the product. This device complies with
the following radio frequency and safety standards.
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
co-located with any other transmitter that has not been tested with this
device.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
L ‘utilisation de ce dispositif est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du
dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
The term “IC” before the equipment certification number only signifies that
the Industry Canada technical specifications were met.
To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
Regulatory information
40
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service faisant
l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin
des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel
(ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet
d'une licence.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE
Directive 1999/5/EC with essential test suites as per standards:
❖
❖
❖
EN 60950 Safety of Information Technology equipment
ETS 300 328 Technical requirements for radio equipment
ETS 300 826 General EMC requirements for radio equipment.
België/
Belgique:
For outdoor usage only channel 10 (2457 MHz) and 11 (2462
MHz) is allowed.
For private usage outside buildings across public grounds over
less than 300m no special registration with IBPT/BIPT is
required. Registration to IBPT/BIPT is required for private usage
outside buildings across public grounds over more than 300m. An
IBPT/BIPT license is required for public usage outside building.
For registration and license please contact IBPT/BIPT.
Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en 11
(2462 MHz). Voor privé-gebruik buiten gebouw over publieke
groud over afstand kleiner dan 300m geen registratie bij BIPT/
IBPT nodig; voor gebruik over afstand groter dan 300m is wel
registratie bij BIPT/IBPT nodig. Voor publiek gebruik buiten
gebouwen is licentie van BIPT/IBPT verplicht. Voor registratie of
licentie kunt u contact opnemen met BIPT.
L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz)
et 11 (2462 MHz). Dans le cas d’une utilisation privée, a
l’extérieur d’un bâtiment, audessus d’un espace public, aucun
enregistrement n’est nécessaire pour une distance de moins de
300m. Pour une distance supérieure à 300m un enregistrement
auprés de I’IBPT est requise. Pour une utilisation publique à
I’extérieur de bâtiments, une licence de I’IBPT est requise. Pour
les enregistrements et licences, veuillez contacter I’IBPT.
Deutschland: License required for outdoor installations. Check with reseller for
procedure to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigung-
spflichtig. Bitte mit Händler die Vorgehensweise abstimmen.
Regulatory information
41
France:
Restricted frequency band: only channels 10 and 11 (2457 MHz
and 2462 MHz respectively) may be used in France. License
required for every installation, indoor and outdoor installations.
Please contact ART for procedure to follow.
Bande de fréquence restreinte : seuls les canaux 10 à 11 (2457 et
2462 MHz respectivement) doivent être utilisés en France. Toute
utilisation, qu’elle soit intérieure ou extérieure, est soumise à
autorisation. Vous pouvez contacter I’Autorité de Régulation des
à suivre.
Italia:
License required for indoor use. Use with outdoor installations
not allowed.
E’necessaria la concessione ministeriale anche per l’uso interno.
Verificare con i rivenditori la procedura da seguire. L’uso per
installazione in esterni non e’ permessa.
Nederland:
License required for outdoor installations. Check with reseller for pro-
cedure to follow.
Licentie verplicht voor gebruik met buitenantennes. Neem contact
op met verkoper voor juiste procedure.
USA-Federal Communications Commission (FCC)
This device complies with Part 15 of FCC Rules. Operation of the devices
in a Wireless LAN System is subject to the following two conditions:
❖
❖
This device may not cause harmful interference.
This device must accept any interference that may cause undesired
operation.
TOSHIBA is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with this TOSHIBA
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by TOSHIBA.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
Caution: Exposure to Radio Frequency Radiation
The Toshiba Wireless LAN Mini PCI Card will be installed with one of two
types of antennas. The both of antenna types, when installed are located at
the upper edge of the LCD screen.
For both antennas, the radiated output power of the TOSHIBA Wireless
LAN Mini PCI Card is far below the FCC radio frequency exposure limits.
Regulatory information
42
Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in
such a manner that the potential for human contact during normal operation
is minimized. In normal operating configuration, the LCD in the upright
position, the distance between the antenna and the user should not be less
than 20cm. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Antenna(s) used in 5.15-5.25GHz frequency band must be integral antenna
which provide no access to the end user.
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.
Caution: Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range. FCC requires this product to be used indoors
for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device.
Taiwan
Article 14
Article 17
Unless approved, for any model accredited low power radio
frequency electric machinery, any company, trader or user shall
not change the frequency, increase the power or change the
features and functions of the original design.
Any use of low power radio frequency electric machinery shall
not affect the aviation safety and interfere with legal
communications. In event that any interference is found, the use
of such electric machinery shall be stopped immediately, and
reusing of such products can be resumed until no interference
occurs after improvement.
The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.
Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.
Using this equipment in Japan
In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second
generation low-power data communication systems such as this equipment
overlaps that of mobile object identification systems (premises radio station
and specified low-power radio station).
Regulatory information
43
1. Sticker
Please put the following sticker on devices incorporating this product.
2. Indication
The indication shown below appears on this equipment.
1
2
3
4
2.4 this equipment uses a frequency of 2.4 GHz.
DS. This equipment uses DS-SS modulation.
The interference range of this equipment is less than 40m.
This equipment uses a frequency bandwidth from 2,400 MHz to
2,483.5 MHz.
It is possible to avoid the band of mobile object identification systems.
3. TOSHIBA Direct PC
Monday – Friday:
Toll Free Tel:
Direct Dial:
Fax:
10:00 – 17:00
0120-13-1100
03-3457-5916
03-5444-9450
Device Authorization
This device obtains the Technical Regulation Conformity Certification and
the Technical Conditions Compliance Approval, and it belongs to the
device class of radio equipment of low-power data communication system
radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.
The Name of the radio equipment: MPC13A-20/R
JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS
EQUIPMENT
Approval Number: D01-1128JP
Regulatory information
44
TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,
03GZDA0017
The following restrictions apply:
❖
❖
Do not disassemble or modify the device.
Do not install the embedded wireless module into other device.
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more of
the following measures:
❖
❖
❖
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
❖
Consult the dealer or an experienced radio/TV technician for help.
Toshiba is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with this Toshiba
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by Toshiba.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
The following information is dependent on what type of wireless device is in your
computer.
Approved Countries/Regions for use for the Atheros AR5001X Mini PCI
Wireless network adapter
This equipment is approved to the radio standard by the countries/regions
in the following table.
Do not use this equipment except in the countries/regions in the following table.
Regulatory information
45
This device works on passive scan only.
A peer-to-peer mode is not available in 802.11a and Turbo Mode.
802.11b (2.4GHz)
Australia
Canada
Austria
Denmark
Germany
Italy
Belgium
Finland
France
Greece
Ireland
Liechtenstein
New Zealand
Sweden
Luxembourg
Norway
Netherlands
Portugal
UK
Switzerland
USA
802.11a (5GHz)
Australia
Canada
Austria
Denmark
Germany
Italy
Belgium
Finland
France
Greece
Ireland
Liechtenstein
New Zealand
Sweden
Luxembourg
Norway
Netherlands
Portugal
UK
Switzerland
USA
Turbo Mode (5GHz)
Canada
USA
Approved Countries/Regions for use for the Intel® PRO/Wireless LAN 2100
3B Mini PCI Adapter
This equipment is approved to the radio standard by the countries/regions
in the following table.
Do not use this equipment except in the countries/regions in the following table.
Argentina
Belgium
Chile
Australia
Brazil
Austria
Canada
Finland
Greece
Denmark
Germany
France
Regulatory information
46
Iceland
Ireland
Italy
Japan
Liechtenstein
Netherlands
Peru
Luxembourg
New Zealand
Portugal
Mexico
Norway
Singapore
Switzerland
USA
Spain
Sweden
UK
Uruguay
Venezuela
Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN
Card
This equipment is approved to the radio standard by the countries/regions
in the following table.
Do not use this equipment except in the countries/regions in the following table.
Australia
Canada
Austria
Belgium
Finland
Denmark
Germany
Iceland
France
Greece
Hong Kong
Italy
Ireland
Japan
Liechtenstein
Netherlands
Philippines
Spain
Luxembourg
New Zealand
Portugal
Sweden
UK
Malaysia
Norway
Singapore
Switzerland
USA
Thailand
Bluetooth wireless technology Interoperability
Bluetooth™ Cards from TOSHIBA are designed to be interoperable with
any product with Bluetooth wireless technology that is based on Frequency
Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:
❖
Bluetooth Specification Ver.1.1, as defined and approved by The
Bluetooth Special Interest Group.
❖
Logo certification with Bluetooth wireless technology as defined by
The Bluetooth Special interest Group.
Regulatory information
47
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not
confirmed compatibility of its Bluetooth™products with all PCs and/or equipment
using Bluetooth wireless technology other than TOSHIBA portable computers.
Always use Bluetooth™cards from TOSHIBA in order to enable wireless
networks over two or more (up to a total of seven) TOSHIBA portable
computers using these cards. Please contact TOSHIBA PC product support
more information.
When you use Bluetooth™cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If
you detect certain interference while you use Bluetooth™cards from
TOSHIBA, always change the frequency, move your PC to the area outside of
the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74
yards or more) or stop transmitting from your PC. Please contact TOSHIBA
the United States for more information.
Bluetooth™and Wireless LAN devices operate within the same radio frequency range and may
interfere with one another. If you use Bluetooth™and Wireless LAN devices simultaneously,
you may occasionally experience a less than optimal network performance or even lose your
network connection. If you should experience any such problem, immediately turn off either
one of your Bluetooth™or Wireless LAN. Please contact Toshiba PC product support on web
Bluetooth wireless technology and your Health
The products with Bluetooth wireless technology, like other radio devices,
emit radio frequency electromagnetic energy. The level of energy emitted
by devices with Bluetooth wireless technology however is far much less
than the electromagnetic energy emitted by wireless devices like for
example mobile phones.
Because products with Bluetooth wireless technology operate within the
guidelines found in radio frequency safety standards and recommendations,
TOSHIBA believes Bluetooth wireless technology is safe for use by
consumers. These standards and recommendations reflect the consensus of
the scientific community and result from deliberations of panels and
committees of scientists who continually review and interpret the extensive
research literature.
In some situations or environments, the use of Bluetooth wireless
technology may be restricted by the proprietor of the building or
responsible representatives of the organization. These situations may for
example include:
❖
Using the equipment with Bluetooth wireless technology on board of
airplanes, or
Regulatory information
48
❖
In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices
in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use the device with Bluetooth
wireless technology prior to turning on the equipment.
Regulatory statements
This product complies with any mandatory product specification in any
country/ region where the product is sold. In addition, the product complies
with the following:
Canada-Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.”
L ‘ utilisation de ce dispositif est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du
dispositif doit étre prét à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
The term "IC" before the equipment certification number only signifies that
the Industry Canada technical specifications were met.
Caution: FCC Interference Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
❖
❖
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Note that any changes or modifications to this equipment not expressly
approved by the manufacturer may void the authorization to operate this
equipment.
Caution: Exposure to Radio Frequency Radiation
The radiated output power of the Bluetooth™ Card from TOSHIBA is far
below the FCC radio frequency exposure limits. Nevertheless, the
Bluetooth™ Card from TOSHIBA shall be used in such a manner that the
potential for human contact during normal operation is minimized.
In order to comply with FCC radio-frequency radiation exposure
guidelines for an uncontrolled environment, the Bluetooth™ Card from
TOSHIBA has to be operated while maintaining a minimum body to
antenna which are located on top of LCD distance of 20 cm.
Regulatory information
49
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.
The Bluetooth™ Card from TOSHIBA is far below the FCC radio
frequency exposure limits.
Nevertheless, it is advised to use the Bluetooth™ Card from TOSHIBA in
such a manner that human contact during normal operation is minimized.
Changes or modifications made to this equipment not expressly approved by
TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate
the equipment.
Taiwan
Article 14
Unless approved, for any model accredited low power radio
frequency electric machinery, any company, trader or user shall
not change the frequency, increase the power or change the
features and functions of the original design.
Article 17
Any use of low power radio frequency electric machinery shall
not affect the aviation safety and interfere with legal
communications. In event that any interference is found, the use
of such electric machinery shall be stopped immediately, and
reusing of such products can be resumed until no interference
occurs after improvement.
The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.
Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.
Using this equipment in Japan
In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second
generation low-power data communication systems such as this equipment
overlaps that of mobile object identification systems (premises radio station
and specified low-power radio station).
Regulatory information
50
1. Sticker
Please put the following sticker on devices incorporating this product.
2. Indication
The indication shown below appears on this equipment.
2 . 4 FH1
1
2
3
4
2.4: this equipment uses a frequency of 2.4 GHz.
FH: This equipment uses FH-SS modulation.
The interference range of this equipment is less than 10m.
This equipment uses a frequency bandwidth from 2,400 MHz to
2,483.5 MHz. It is impossible to avoid the band of mobile object
identification systems.
3. TOSHIBA Direct PC
Monday – Friday:
Toll Free Tel:
Direct Dial:
10:00 – 17:00
0120-13-1100
03-3457-5916
03-5444-9450
Fax:
Device Authorization
This device obtains the Technical Regulation Conformity Certification, and
it belongs to the device class of radio equipment of low-power data
communication system radio station stipulated in the Radio Law of Japan.
The Name of the radio equipment: EYXF2CS
TELECOM ENGINEERING CENTER
Approval Number: 01NYDA1305
The following restrictions apply:
❖
Do not disassemble or modify the device.
Regulatory information
51
❖
Do not install the embedded wireless module into other device.
CD-ROM, DVD-ROM, Multi-function Drive Safety Instructions
CD-ROM, DVD-ROM and multi-function drives employ a laser system. To
ensure proper use of this product, please read this instruction manual
carefully and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
(Sample shown below. (Location of the label and manufacturing
information may vary.)
This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To
use this model properly, read the instruction manual carefully and keep it for your future
reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED
service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
Use of controls or adjustments or performance of procedures other than those specified in the
owner’s manual may result in hazardous radiation exposure.
Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc.
with all rights reserved. Under the copyright laws, this guide cannot be
reproduced in any form without the prior written permission of Toshiba. No
patent liability is assumed, however, with respect to the use of the
information contained herein.
©2003 by Toshiba America Information Systems, Inc. All rights reserved.
Regulatory information
52
Export Administration Regulation
This document contains technical data that may be controlled under the
U.S. Export Administration Regulations, and may be subject to the
approval of the U.S. Department of Commerce prior to export. Any export,
directly or indirectly, in contravention of the U.S. Export Administration
Regulations is prohibited.
Notice
The information contained in this manual, including but not limited to any
product specifications, is subject to change without notice.
TOSHIBA CORPORATION AND TOSHIBA AMERICA
INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO
WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO
ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY
FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY
FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR
OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES
BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT
SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,
WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR
ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE
THEREOF.
Trademarks
Satellite, Noteworthy and InTouch are registered trademarks of Toshiba
America Information Systems, Inc. and/or Toshiba Corporation.
Microsoft, Direct3D, DirectSound, DirectMusic and Windows are
registered trademarks of Microsoft Corporation.
Wi-Fi is a trademark of the Wireless Capability Ethernet Alliance.
Bluetooth is a trademark owned by its proprietor and used by Toshiba
under license. TouchPad is a trademark of Synaptics, Inc. Intel and Pentium
are registered trademarks of the Intel Corporation. PS/2 is a registered
trademark of IBM, Inc. i.LINK is a registered trademark of Sony
Corporation. OpenGL is a registered trademark of Silicon Graphics, Inc.
BatteryMark is a trademark of Ziff Davis Publishing Holdings Inc.
All other brand and product names are trademarks or registered trademarks
of their respective companies.
Regulatory information
53
Computer Disposal Information
This product contains mercury. Disposal of this material may be regulated
due to environmental considerations. For disposal, reuse or recycling
information, please contact your local government or the Electronic
Industries Alliance at www.eiae.org.
Index
54
Index
A
AC adapter 5
AC power light 5
adding memory 7
alarms low battery 20
avoiding injury 4
DC-IN 6
screen is blank 25
eject button 17
removing a disc 18
B
battery
alarms 20
changing 20
installing 20
light 20
monitoring power 20
removing 20
built-in features 28
buttons
ergonomics
CD/DVD controls 17
control 16
DVD-ROM drive
eject 17
multi-function drive
program has performed an illegal
eject 17
C
F
card
SD 14
backing up 15
CD/DVD control buttons 17
CD/DVDs
inserting 17, 18
removing 18
CDs
inserting 18
changing
help
main battery 20
comfort
I
icons
chair 5
safety 3
inserting
CDs and DVDs 18
PC Card 13
SD card 15
installing
compact discs
inserting 18
computer
moving 19
placement 4
setting up 7
computing tips 15
main battery 20
memory module 7
Index
interference statement 44
internal drives 32
printer
connecting 6
problem solving
K
keyboard
contacting Toshiba 27
unexpected characters 25
L
lights
AC power 5
battery 20
25
M
processor, specifications 28
main battery
changing 20
removing 20
memory
accessing slots 8
adding 7
disc with computer off 19
disc with computer on 18
removing 11
memory module
removing 12
Microsoft Windows XP 3
moving the computer 19
multi-function drive
eject button 17
inserting a disc 17
removing a disc 18
S
safety
O
operating system 3
optional devices 32
inserting 15
using 14
environmental 33
physical dimensions 32, 33
ports 31
power 29
processor 28
standard hardware 31
storage capacity 30
standard hardware, specifications 31
storage capacity, specifications 30
P
PC Card
checklist 26
computer stops working 26
inserting 13
problem solving 26
removing 14
replacing 14
port
specifications 31
power
cable 6
cable connectors 28
computer will not start 25
monitoring 20
specifications 29
power devices 32
precautions 5
Index
56
T
tips on computing 15
Toshiba Accessories Information 4
Toshiba Web sites 27
TouchPad
using 16
TOSHIBA
C1819-3
|