Toshiba Graphics Tablet at330 User Manual

User's Manual  
TOSHIBA AT330  
 
TOSHIBA AT330  
User's Manual  
iii  
 
TOSHIBA AT330  
Chapter 1  
Legal & Regulatory  
Copyright  
© 2012 by TOSHIBA Corporation. All rights reserved. Under the copyright  
laws, this manual cannot be reproduced in any form without the prior  
written permission of TOSHIBA. No patent liability is assumed, with respect  
to the use of the information contained herein.  
First edition April 2012  
Disclaimer  
This manual has been validated and reviewed for accuracy. The  
instructions and descriptions it contains are accurate for this device at the  
time of this manual’s production. However, succeeding devices and  
manuals are subject to change without notice. TOSHIBA assumes no  
liability for damages incurred directly or indirectly from errors, omissions or  
discrepancies between this device and the manual.  
This product incorporates copy protection technology that is protected by  
U.S. and foreign patents, including patent numbers 5,315,448; 5,583,936;  
6,836,549; and 7,050,698 and other intellectual property rights. The use of  
Rovi Corporation's copy protection technology in the product must be  
authorized by Rovi Corporation. Reverse engineering or disassembly is  
prohibited.  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,  
TOSHIBA CORPORATION, ITS AFFILIATES AND/OR SUPPLIERS  
(“TOSHIBA”) DISCLAIM ALL WARRANTIES WITH REGARD TO THE  
SOFTWARE, EITHER EXPRESSLY -IMPLIED, OR STATUTORY,  
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF  
NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND THE IMPLIED  
WARRANTIES AND CONDITIONS OF MERCHANTABILITY  
ANDFITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS  
TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH  
YOU. TOSHIBA SHALL NOT WARRANT THAT THE FUNCTIONS  
CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS  
OR THAT THE OPERATION OF THE SOFTWARE WILL BE  
UNINTERRUPTED OR ERROR-FREE.  
Notwithstanding the above, portions of the software include software files  
subject to certain open source license agreements, and such open source  
software files are subject to the notices and additional terms and conditions  
that are referenced in the End User License Agreement (“EULA”) shown in  
“Toshiba Legal Information” section of the “Legal information” available  
User's Manual  
 
1-1  
     
TOSHIBA AT330  
under the “About tablet” in the “Settings” app. (EULA document is also in  
this package.) Such open source software files are provided on an “AS IS”  
basis to the maximum extent permitted by applicable law.  
Please carefully read “Open source licenses” section of the “Legal  
Information” available under the “About tablet” in the “Settings” app for the  
relevant copyright and licensing terms. If there is any discrepancy between  
the terms and conditions of the applicable open source license agreement  
and the EULA, the terms and conditions of the applicable open source  
license agreement prevail with respect to the applicable open source  
software.  
Until the date that is three years after you acquired the Software, you may  
obtain a copy of the source code corresponding to the binaries for GPL-  
licensed file by sending a request to TOSHIBA customer service at [http://  
support.toshiba-tie.co.jp/android/index_e.htm], and TOSHIBA will send you  
a link to such source code.  
Trademarks  
Google, Android, Google Play, Google Mobile services, Google Apps,  
Google Calendar, Google Latitude, Google Maps, Google Talk, Picasa and  
other marks are trademarks of Google Inc.  
Availability of Google applications, services, and features may vary by  
country, carrier, phone model, and manufacturer.  
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA  
under license.  
Wi-Fi is a registered trademark of the Wi-Fi Alliance.  
Secure Digital and SD are trademarks of SD Card Association.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the  
HDMI Logo are trademarks or registered trademarks of HDMI Licensing  
LLC in the United States and other countries.  
Adobe, Adobe PDF, Flash, AIR and the Flash logo, AIR logo are either  
registered trademarks or trademarks of Adobe Systems Incorporated in the  
United States and/or other countries.  
SRS and SRS logo are trademarks or registered trademarks of SRS Labs,  
Inc. SRS technology is incorporated under license from SRS Labs, Inc.  
SRS Premium Voice PRO technology is incorporated under license from  
SRS Labs, Inc.  
TouchSense is a trademark of Immersion Corporation.  
Other trademarks and registered trademarks not listed above may be used  
in this manual.  
H.264/AVC, VC-1 and MPEG-4 License Notice  
THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND  
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL  
User's Manual  
 
1-2  
   
TOSHIBA AT330  
AND NON-COMMERCIAL USE OF A CONSUMER TO (i)ENCODING  
VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("VIDEO") AND/  
OR (ii)DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS  
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-  
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO. NO  
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.  
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO  
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND  
LICENSING MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE http://  
FCC information  
FCC notice "Declaration of Conformity Information"  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Only peripherals complying with the FCC class B limits may be attached to  
this equipment. Operation with non-compliant peripherals or peripherals not  
recommended by TOSHIBA is likely to result in interference to radio and  
TV reception. Shielded cables must be used between the external devices  
and the device’s Universal Serial Bus (USB 2.0) ports, HDMI port and  
microphone/headphone combo jack. Changes or modifications made to  
this equipment, not expressly approved by TOSHIBA or parties authorized  
by TOSHIBA could void the user’s authority to operate the equipment.  
FCC conditions  
This device complies with part 15 of the FCC Rules. Operation is subject to  
the following two conditions:  
1. This device may not cause harmful interference.  
User's Manual  
 
1-3  
 
TOSHIBA AT330  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Contact  
Address:  
TOSHIBA America Information Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618-1697  
(949) 583-3000  
Telephone:  
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of the Wireless LAN is far below the FCC radio  
frequency exposure limits. Nevertheless, the Wireless LAN shall be used in  
such a manner that the potential for human contact during normal  
operation is minimized.  
In the usual operating configuration, the distance between the antenna and  
the user should not be less than 20cm. Please refer to the "Grand Tour"  
section in this manual for the details regarding antenna location.  
The installer of this radio equipment must ensure that the antenna is  
located or pointed such that it does not emit RF field in excess of Health  
Canada limits for the general population; consult Safety Code 6, obtainable  
from Health Canada’s website.  
CE compliance  
This product is carrying the CE-Mark in compliance with  
the related European Directives. Responsible for CE-  
Marking is Toshiba Europe GmbH, Hammfelddamm 8,  
41460 Neuss, Germany. The complete and official EU  
Declaration of Conformity can be found on TOSHIBA’s  
Working environment  
The Electromagnetic Compliance (EMC) of this product has been verified  
typically for this product category for a so called Residential, Commercial &  
Light Industry Environment. Any other working environment has not been  
verified by Toshiba and the use of this product in these working  
environments is maybe restricted or cannot be recommended. Possible  
consequences of the use of this product in non verified working  
environments can be: Disturbances of other products or of this product in  
the nearby surrounding area with temporarily malfunction or data loss/  
corruption as result. Example of non verified working environments and  
related advices:  
User's Manual  
 
1-4  
   
TOSHIBA AT330  
Industrial environment (e.g. where 3-phase 380V mains is being used  
mainly): Danger of disturbances of this product due to possible strong  
electromagnetic fields especially near to big machinery or power units.  
Medical environment: The compliance to the Medical Product Directive has  
not been verified by Toshiba, therefore this product cannot be used as a  
medical product without further verification. The use in usual office  
environments e.g. in hospitals should be no problem if there is no  
restriction by the responsible administration.  
Automotive environment: Please search the owner instructions of the  
related vehicle for advices regarding the use of this product (category).  
Aviation environment: Please follow the instructions of the flight personnel  
regarding restrictions of use.  
Additional environments not related to EMC  
Outdoor use: As a typical home/office equipment this product has no  
special resistance against ingress of moisture and is not strong shock  
proofed.  
Explosive atmosphere: The use of this product in such special working  
environment (Ex) is not allowed.  
REACH - Compliance Statement  
The new European Union (EU) chemical regulation, REACH (Registration,  
Evaluation, Authorization and Restriction of Chemicals), entered into force  
on 1 June 2007. Toshiba will meet all REACH requirements and is  
committed to provide our customers with information about the chemical  
substances in our products according to REACH regulation.  
info/reach for information about the presence in our articles of substances  
included on the candidate list according to article 59(1) of Regulation (EC)  
No 1907/2006 („REACH“) in a concentration above 0.1% weight by weight.  
User's Manual  
 
1-5  
   
TOSHIBA AT330  
Following information is only valid for EU-  
member States:  
Disposal of products  
The crossed out wheeled dust bin symbol indicates that  
products must be collected and disposed of separately  
from household waste. Integrated batteries and  
accumulators can be disposed of with the product. They  
will be separated at the recycling centres.  
The black bar indicates that the product was placed on the  
market after August 13, 2005.  
By participating in separate collection of products and  
batteries, you will help to assure the proper disposal of  
products and batteries and thus help to prevent potential  
negative consequences for the environment and human  
health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website (http://eu.computers.toshiba-europe.com)  
or contact your local city office or the shop where you  
purchased the product.  
Disposal of batteries and/or accumulators  
The crossed out wheeled dust bin symbol indicates that  
batteries and/or accumulators must be collected and  
disposed of separately from household waste.  
If the battery or accumulator contains more than the  
specified values of lead (Pb), mercury (Hg), and/or  
cadmium (Cd) defined in the Battery Directive (2006/66/  
EC), then the chemical symbols for lead (Pb), mercury  
(Hg) and/or cadmium (Cd) will appear below the crossed  
out wheeled dust bin symbol.  
By participating in separate collection of batteries, you will  
help to assure the proper disposal of products and  
batteries and thus help to prevent potential negative  
consequences for the environment and human health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website (http://eu.computers.toshiba-europe.com)  
or contact your local city office or the shop where you  
purchased the product.  
User's Manual  
 
1-6  
 
TOSHIBA AT330  
These symbols may not stick depending on the country and region where  
you purchased.  
Following information is only for India:  
The use of this symbol indicates that this product may not  
be treated as household waste.  
By ensuring this product is disposed of correctly, you will  
help prevent potential negative consequences for the  
environment and human health, which could otherwise be  
caused by inappropriate waste handling of this product.  
For more detailed information about recycling of this  
india.com) or contact call center (1800-200-8674).  
Canadian regulatory information (Canada only)  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulation of the Canadian Department of Communications.  
Note that Canadian Department of Communications (DOC) regulations  
provide, that changes or modifications not expressly approved by  
TOSHIBA Corporation could void your authority to operate this equipment.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Cet appareil numérique de la class B respecte toutes les exgences du  
Règlement sur le matériel brouileur du Canada.  
Canada - Industry Canada (IC)  
This device complies with RSS 210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not  
cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of this device.  
The term "IC" before the equipment certification number only signifies that  
the Industry Canada technical specifications were met.  
Following information is only for Turkey:  
Compliant with EEE Regulations: Toshiba meets all requirements of  
Turkish regulation 26891 “Restriction of the use of certain hazardous  
substances in electrical and electronic equipment”.  
User's Manual  
 
1-7  
       
TOSHIBA AT330  
The number of possible pixel failures of your display is defined  
according to ISO 9241-307 standards. If the number of pixel failures is  
less than this standard, they will not be counted as defect or failure.  
Battery is a consumption product, since the battery time depends on  
the usage of your tablet. If the battery can not be charged at all, then it  
is a defect or failure. The changes in battery time is not a defect or  
failure.  
User's Manual  
 
1-8  
TOSHIBA AT330  
Chapter 2  
Introduction  
Welcome and thank you for choosing a TOSHIBA product.  
About the guide  
For your convenience, your TOSHIBA product is furnished with two guides:  
a Quick Start Guide, and  
this comprehensive PDF User’s Manual  
We recommend making a backup of this User's Manual in case of future  
reference.  
Please backup your personal data saved in the internal storage before  
updating the platform.  
Instruction Manual for Safety and Comfort  
All important information on the safe and proper use of this tablet is  
described in the enclosed Instruction Manual for Safety and Comfort. Be  
sure to read it before using the tablet.  
Safety icons  
Safety icons are used in this manual to bring important information to your  
attention. Each type of icon and its implication are identified as shown  
below.  
Indicates a potentially hazardous situation, which could result in death or  
serious injury, if you do not follow instructions.  
Pay attention! A caution informs you that improper use of equipment or  
failure to follow instructions may cause data loss or damage your  
equipment.  
Please read. A note is a hint or advice that helps you make best use of  
your equipment.  
User's Manual  
 
2-1  
       
TOSHIBA AT330  
Chapter 3  
Getting Started  
This chapter provides a general overview of your tablet and some basics  
before using your tablet.  
Some of the features described in this manual may not function properly if  
you use an operating system that was not pre-installed by TOSHIBA.  
Check the components  
Check to make sure you have all of the following items:  
Hardware  
TOSHIBA Tablet  
AC adaptor (2-pin or 3-pin)  
Power cable  
Toshiba Tablet Stand  
Documentation  
Quick Start Guide  
Instruction Manual for Safety and Comfort  
If any of the items is missing or damaged, contact your dealer immediately.  
Grand tour  
Please handle your product carefully to avoid scratching or damaging the  
surface.  
The following figure shows each important part of your tablet.  
User's Manual  
 
3-1  
     
TOSHIBA AT330  
Figure 3-1 Grand tour of the tablet  
2
3
4
6
5
7
8
9
1
10  
11  
12  
13  
14  
15  
17  
15  
14  
16  
1. Power button  
2. Multi function switch  
4. Microphone  
6. Web Camera indicator  
8. Display screen  
3. Volume down/up button  
5. Ambient light sensor  
7. Web Camera (front)  
9. Headphone/Microphone combo  
jack  
10. Memory media slot  
11. Micro USB port  
13. DC IN 19V jack  
15. Wireless communication  
antennas (not shown)*  
17. Camera flash  
12. Micro HDMI port  
14. Speakers  
16. Camera (back)  
*Provided with some models.  
Product appearance depends on the model you purchased.  
Power button  
Press & hold this button to turn on/off the tablet.  
Multi function switch This switch functions as a lock for screen  
orientation, system sound or hardware buttons.  
Please refer to the section the Multi function  
switch section for details.  
Volume down/up  
button  
Press either of the buttons to decrease or  
increase the volume.  
User's Manual  
 
3-2  
TOSHIBA AT330  
Microphone  
A built-in microphone allows you to import and  
record sounds for your application.  
Ambient light sensor Ambient light sensor can detect the light quality  
and intensity outside and can use this information  
to automatically adjust the display screen  
brightness.  
Web Camera indicator The Web Camera indicator will glow blue when  
the Web Camera is in operation.  
Web Camera  
Your tablet is equipped with a front Web Camera  
and a back camera used for recording video or  
taking photographs.  
Display Screen  
Display screen brightness can be adjusted either  
manually or automatically.  
Under certain operating conditions, e.g., very high ambient temperatures,  
your tablet might automatically dim the LCD brightness in order to maintain  
a reasonable system temperature. This is a normal protective feature and  
you might not be able to manually adjust the LCD brightness during the  
auto dimming period.  
Headphone/  
Microphone combo  
jack  
A 3.5 mm mini headphone/microphone combo  
jack enables connection of a monaural  
microphone or a stereo headphone.  
The external microphone will be disabled if you use a 4-pin headset other  
than the type as shown below.  
Mic  
Ground  
Right  
Left  
Memory media slot  
This slot lets you insert an SD™ Card which  
enables you to transfer data from devices, such  
as digital camera, onto your tablet.  
Please refer to the Memory media slot section in  
"Optional Accessories" chapter for details.  
Keep foreign metal objects, such as screws, staples and paper clips, out of  
the memory media slot. Foreign metal objects can create a short circuit,  
which can cause damage and fire, possibly resulting in serious injury.  
User's Manual  
 
3-3  
TOSHIBA AT330  
Micro USB port  
The tablet acts both as a host and a client via this  
port. It allows you to connect the tablet to a  
computer for transferring data. When acting as a  
host, the tablet can fast and directly  
communicate with other portable devices without  
the assistance of a computer.  
Please refer to the USB device section in  
"Optional Accessories" chapter for details.  
Micro HDMI port  
Micro HDMI port can connect to HDMI cable with  
Type D connector.  
An HDMI cable sends video and audio signals. In  
addition to this, it can send and receive control  
signals.  
Please refer to the HDMI device section in  
"Optional Accessories" chapter for details.  
DC IN 19V jack  
The AC adaptor connects to this socket to power  
the computer. Please note that you should only  
use the model of AC adaptor supplied with the  
computer at the time of purchase - using the  
wrong AC adaptor can cause damage to the  
computer (depends on the model you  
purchased).  
Speakers  
The speakers emit sound generated by your  
software as well as audio alarms, such as low  
battery condition, generated by the system.  
Wireless  
communication  
antennas  
Some models are equipped with Wireless LAN  
and Bluetooth antennas.  
Camera flash  
This LED flash can be used as a light source  
when the ambient light is not bright.  
Multi function switch  
The switch on your tablet is multi functional. Please refer to Display section  
in “Settings” chapter for details. Available function settings are described in  
below table.  
Function  
Description  
Lock screen  
orientation  
Switch to lock/unlock automatic rotation of the  
screen orientation.  
User's Manual  
 
3-4  
 
TOSHIBA AT330  
Lock hardware  
buttons(Power/  
Volume)  
Switch to lock/unlock the Power & Volume  
buttons on the tablet. Even if the Power button is  
locked, you can still press & hold it for about 6  
seconds to force power off.  
Mute sound  
Switch to mute/unmute sound.  
Hardware  
This section identifies various components and the hardware of the tablet -  
it is recommended that you become familiar with each before you operate  
the tablet.  
The actual specifications may vary depending on the model you  
purchased.  
This tablet does not support CD/DVD/Blu-ray Disc™.  
Content that is copyright protected or has limited access rights, cannot  
be played on this tablet.  
Processor  
Your tablet is equipped with an NVIDIA® Tegra™  
Mobile Processor.  
CPU  
Memory  
Memory on board  
This tablet is equipped with a 1GB memory on  
board. The actual amount of usable system  
memory will be less than the installed memory  
modules. This tablet does not support memory  
expansion.  
Flash Memory  
This tablet is equipped with a flash memory.  
Power  
Battery  
The tablet is powered by one lithium-ion battery.  
AC adaptor  
The AC adaptor provides power to the system  
and recharges the battery when it is low.  
As the AC adaptor is universal, it can receive a  
range of AC voltages from 100 to 240 volts,  
however you should note that the output current  
varies among different models. Using the wrong  
adaptor might damage your tablet.  
User's Manual  
 
3-5  
 
TOSHIBA AT330  
Display  
The tablet's internal display panel supports high-resolution video graphics  
and can be set to a wide range of viewing angles for maximum comfort and  
readability.  
Display panel  
33.8cm (13.3") LCD screen configured with the  
following resolutions:  
1600 horizontal x 900 vertical pixels  
Graphics controller  
The graphics controller maximizes display  
performance.  
Multimedia  
Web Camera  
Web Camera is a device that allows you to  
record video or take photographs with your  
tablet. You can use it for video chatting or video  
conferences by using a communication tool.  
Communications  
Bluetooth  
Bluetooth wireless communication function  
eliminates the need for cables between electronic  
devices such as computers, printers and mobile  
phones. When it is enabled, Bluetooth will  
provide the wireless personal area network  
environment which is safe and trustworthy, that is  
quick and easy.  
Wireless LAN  
The tablet is equipped with a Wireless LAN/  
Bluetooth combo module that is compatible with  
other Wireless LAN systems based on Direct  
Sequence Spread Spectrum/Orthogonal  
Frequency Division Multiplexing radio technology  
that complies with the IEEE 802.11 Standard.  
Using the tablet for the first time  
This section provides basic information about how to start using your tablet.  
It covers below steps followed by the details.  
Connecting the AC adaptor  
Turning on the power  
Initial Setup  
Turning off the power  
Use a virus-check program and make sure it is updated regularly.  
User's Manual  
 
3-6  
 
TOSHIBA AT330  
Never format storage media without checking its content - formatting  
destroys all stored data.  
It is a good idea to periodically backup internal storage of the tablet to  
an external media. General storage media is not durable or stable  
over long periods of time and under certain conditions may result in  
data loss.  
Connecting the AC adaptor  
When battery power becomes low, you must recharge it.  
Use the tablet only when it is connected to an AC power source to charge  
the battery. Never attempt to charge the battery with any other charger.  
The AC adaptor can automatically adjust to any voltage ranging from 100  
to 240 volt and to a frequency of either 50 or 60 hertz, enabling you to use  
this product in almost any country/region. The adaptor converts AC power  
to DC power and reduces the voltage supplied to this tablet.  
Attach the AC adaptor when you need to charge the battery or you want to  
operate from AC power. It is also the fastest way to get started, because  
the battery will need to be charged before you can operate from battery  
power.  
Always use the TOSHIBA AC adaptor that was included with your  
tablet, or use AC adaptors specified by TOSHIBA to avoid any risk of  
fire or other damage to the tablet. Use of an incompatible AC adaptor  
could cause fire or damage to the tablet possibly resulting in serious  
injury. TOSHIBA assumes no liability for any damage caused by use  
of an incompatible adaptor.  
Never plug the AC adaptor into a power source that does not  
correspond to both the voltage and the frequency specified on the  
regulatory label of the unit. Failure to do so could result in a fire or  
electric shock, possibly resulting in serious injury.  
Always use or purchase power cables that comply with the legal  
voltage and frequency specifications and requirements in the country  
of use. Failure to do so could result in a fire or electric shock, possibly  
resulting in serious injury.  
When you connect the AC adaptor to the tablet, always follow the  
steps in the exact order as described in the User’s Manual.  
Connecting the plug to a live electrical outlet should be the last step  
otherwise the DC output plug could hold an electrical charge and  
cause an electrical shock or minor bodily injury when touched. As a  
general safety precaution, avoid touching any metal parts.  
User's Manual  
 
3-7  
TOSHIBA AT330  
Never place your tablet or AC adaptor on a wooden surface, furniture,  
or any other surface that could be marred by exposure to heat since  
the tablet base and AC adaptor's surface increase in temperature  
during normal use.  
Always place your tablet or AC adaptor on a flat and hard surface that  
is resistant to heat damage.  
1. Connect the power cord to the AC adaptor.  
Figure 3-2 Connecting the power cord to the AC adaptor (2-pin plug)  
Figure 3-3 Connecting the power cord to the AC adaptor (3-pin plug)  
Depending on the model, either a 2-pin or 3-pin AC adaptor will be  
bundled with the tablet.  
The supplied power cable conforms to safety rules and regulations in  
the region the tablet is bought and should not be used outside of this  
region. In order to use the AC adaptor or tablet in other regions, you  
should buy a power cable that conforms to the safety rules and  
regulations in that particular region.  
User's Manual  
 
3-8  
TOSHIBA AT330  
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on  
your tablet.  
Figure 3-4 Connecting the DC output plug to the tablet  
1
2
1. DC IN 19V jack  
2. DC output plug  
3. Plug the AC adaptor into a live wall outlet.  
Turning on the power  
This section describes how to power up your tablet.  
Press & hold Power button to turn on the tablet. The tablet will vibrate to  
indicate the status.  
Figure 3-5 Turn on the tablet  
Initial Setup  
The Setup Screen will be the first screen displayed when you turn on the  
power. Setup your tablet according to the following steps:  
1. Choose your preferred system language and tap Start to start the  
initial setup process.  
2. Connect to a Wi-Fi network.  
You can tap Skip and turn Wi-Fi on later in Settings app.  
3. Set date and time or enable automatic date & time and tap Next to  
continue.  
4. Register or sign in with a Google™ account. You can also skip this  
step by tapping Not now.  
5. Choose whether to use Google Location Service™ and tap Next to  
continue.  
6. Enter your name to personalize some apps. Tap Next to continue.  
7. Tap Next to agree the privacy policy and other terms.  
8. You tablet is now set up and ready to use. Tap Finish to exit Setup  
Screen.  
User's Manual  
 
3-9  
TOSHIBA AT330  
Turning off the power  
If you are not going to use your tablet for a long time, shut it down. You can  
also turn the LCD off in order to extend battery life.  
Shut down the tablet  
When you shut down the tablet, no data will be saved. The tablet will boot  
to the operating system's main screen the next time it is turned on.  
1. If you have entered data, either save it to flash memory or to other  
storage media.  
Never turn off the power while an application is running. Doing so  
could cause loss of data.  
Never turn off /disconnect the power , or remove external storage  
media during data read/write. Doing so can cause data loss.  
2. Turn off or remove any peripheral devices connected to the tablet.  
3. Press & hold Power button for 2 seconds and select OK to turn off the  
tablet.  
In any emergency case, you can also press & hold Power button for  
about 6 seconds to force power off.  
Do not turn the tablet back on immediately - wait a short period to  
avoid any potential damage.  
Turning the LCD off/on  
You can turn the LCD off (while the system is still running) in one of the  
following ways:  
Press Power button.  
Set the sleep timeout in Settings app.  
To turn the LCD on:  
Press Power button once again.  
Unlocking your screen  
After turning on the LCD, the screen remains locked. You can unlock the  
screen in the following ways:  
1.  
Press & hold the lock icon (  
camera icon (  
) while it turns to a white ring with a  
).  
) and an unlock icon (  
2. Slide the ring towards the appearing lock or slide the ring towards the  
camera to open Camera app.  
User's Manual  
 
3-10  
TOSHIBA AT330  
Figure 3-6 Lock screen  
If you have set up a screen lock through one of the three ways as Pattern,  
PIN or Password, the method of unlocking the screen will be different. See  
Security section for other ways to protect your tablet and privacy.  
Care and use of the battery  
This section provides the important safety precautions in order to handle  
your battery properly.  
Refer to the enclosed Instruction Manual for Safety and Comfort for  
detailed precautions and handling instructions.  
The lithium ion battery can explode if not handled or disposed of  
properly. Dispose of the battery as required by local ordinances or  
regulations.  
Charge the battery only in an ambient temperature between 5 and 35  
degrees Celsius. Otherwise, the electrolyte solution might leak, battery  
performance might deteriorate and the battery life might be shortened.  
Never try to remove or replace the battery by yourself which may  
possibly result in serious injury. Please contact an authorized Toshiba  
service provider, if necessary.  
Charging the battery  
When the battery power becomes low, you must recharge it to avoid losing  
any data.  
Procedure  
You can charge the battery when the tablet is either on or off by connecting  
the AC adaptor.  
Off  
An icon shaped like an actual battery - a battery meter with flashing  
borders appears in the center of the screen allowing you to keep track  
of the battery level. When the battery is fully charged, the meter  
reaches its full capacity.  
User's Manual  
 
3-11  
   
TOSHIBA AT330  
On  
Likewise, a battery meter on the right side of the System Bar indicates  
the battery level.  
Charging time  
The following table shows the approximate time required to fully charge a  
discharged battery when the AC adaptor is connected to the tablet.  
Battery type  
Charging time  
Battery (3 cell, 37.2Wh)  
about 8 hours  
Please be aware that the charging time when the tablet is on is affected by  
ambient temperature, the temperature of the tablet and how you are using  
the tablet - for example if you make heavy use of external devices then the  
battery might get scarcely charged up.  
Battery exhausted time  
The following table shows the approximate exhausted time of a fully  
charged battery.  
Battery type  
Time  
Battery (3 cell, 37.2Wh)  
about 12 hours (in use)  
about 7 days (sleep mode)  
Please be aware that the battery exhausted time will be affected by how  
you are using the tablet.  
Battery charging notice  
The battery may not begin charging immediately under the following  
conditions:  
The battery is extremely hot or cold (if the battery is extremely hot, it  
might not charge at all). To ensure the battery charges to its full  
capacity, you should charge it at room temperature of between 5°C to  
35°C (41°F to 95°F).  
The battery is nearly completely discharged. In this instance, the tablet  
can’t be turned on immediately. You should leave the AC adaptor  
connected for a few minutes and the battery should begin charging. A  
battery meter icon ( ) will appear indicating the charging status.  
The indicator may show a rapid decrease in battery operating time when  
you try to charge a battery under the following conditions:  
The battery has not been used for a long time.  
User's Manual  
 
3-12  
TOSHIBA AT330  
The battery has completely discharged and been left unattended for a  
long time.  
In such cases you should follow the steps as detailed below:  
1. Fully discharge the battery when powered on until the system  
automatically turns the tablet off.  
2. Connect the AC adaptor to the docking interface of the tablet, and to a  
wall outlet that is supplying power.  
3. Charge the battery until the battery meter reaches its full capacity.  
Repeat these steps two or three times until the battery recovers normal  
capacity.  
User's Manual  
 
3-13  
TOSHIBA AT330  
Chapter 4  
Basics  
This chapter describes the basic operations of your tablet and the Home  
screen.  
Using the touch screen  
You can use your finger to manipulate icons, buttons, menu items, the  
onscreen keyboard, and other items on the touch screen.  
Tap  
Simply tap your finger on the touch screen to act on items on the  
screen, such as application and settings icons, to type letters and  
symbols using the onscreen keyboard, or to tap onscreen buttons.  
Press & hold  
Press & hold an item on the screen until an action occurs. It functions  
like the right-click on a standard mouse.  
Drag  
Press & hold an item for a moment and then, without lifting your finger,  
move your finger on the screen until you reach the target position. You  
can drag items on the Home screen to reposition them.  
Swipe or slide  
To swipe or slide, you quickly move your finger across the surface of  
the screen, without pausing when you first touch it (so you don’t drag  
an item instead). For example, you slide the screen up or down to  
scroll a list.  
Double tap  
Tap quickly twice on a webpage, map or other screen to zoom.  
Pinch  
In some apps (such as Browser and Gallery), you can zoom in/out by  
placing two fingers on the screen at once and pinching them together  
or spreading them apart.  
Getting to know the Home screen  
The Home screen is your starting point for using all the installed apps on  
your tablet. You can customize the Home screen to display the widgets,  
app shortcuts, wallpapers and other shortcuts you prefer.  
User's Manual  
 
4-1  
     
TOSHIBA AT330  
Figure 4-1 Home screen  
1
2
3
5
4
6
1. All Apps  
3. Back  
2. Application shortcuts  
4. Home  
5. Recent apps  
6. System bar  
Item  
Description  
Tap to see all your apps and  
widgets.  
All Apps  
Application shortcuts  
Back  
Tap to open an app.  
Return to the previous screen.  
Return to the center Home screen.  
Home  
Recent apps  
Tap to see the thumbnails of your  
recently used apps.  
System bar  
The System bar is located  
permanently at the bottom of the  
screen. Navigation buttons,  
notification icons, the current time  
and status icons are all displayed.  
The Back, Home and Recent apps icons may fade away or shrink into  
dots after a short period of time without operation, depending on which  
apps you are using.  
To bring them back, tap their locations.  
Swipe left or right to see more Home screen panels.  
Use panels to organize your widgets and app shortcuts. See  
Customizing the Home screen section for the details.  
User's Manual  
 
4-2  
TOSHIBA AT330  
Opening and switching applications  
The All Apps main screen holds icons for all the apps and widgets on your  
tablet.  
Tap WIDGETS tab on the top of the screen to view widgets that you have  
downloaded and installed. Widgets show you the latest updates of apps.  
To manage all your apps and widgets, tap Settings -> Apps under Device.  
Opening an application  
You may open an application by:  
Tapping its icon on the Home screen.  
Tapping its icon from the All Apps main screen.  
Switch to a recently used application  
You may switch to recently used application by:  
Tap Recent apps (  
) and select an application that you want to  
switch to.  
To remove an application, swipe the thumbnail sideways.  
Monitoring your tablet’s status  
The right side of the System bar displays icons indicating that you’ve  
received notifications, the current time, and icons indicating the tablet’s  
status.  
Status icons  
The icons on the right of the current time indicate the status of your tablet.  
Notification icons  
The icons on the left of the current time indicate different types of  
notifications. In addition to system notification icons, applications you  
installed on your tablet may use their own notification icons.  
Quick Settings  
You can use Quick Settings to change settings, such as Airplane mode,  
Wi-Fi, Auto-rotate screen, Brightness, Notifications. Double tap the  
current time to open Quick Settings screen, and tap the area outside of the  
Quick Settings screen to close it.  
Airplane mode  
Switch to the ON position to turn on airplane mode in which all  
wireless radios are disabled.  
Wi-Fi  
Tap to open a list of available Wi-Fi networks.  
User's Manual  
 
4-3  
     
TOSHIBA AT330  
Video enhancement  
Switch to the ON position to enable video enhancement.  
Audio enhancement  
Switch to the ON position to enable audio enhancement.  
Enable Balanced Power  
Switch to the ON position to enable power saving.  
Auto-rotate screen  
Switch to the ON position to enable automatic screen orientation as  
you turn your tablet sideways.  
Brightness  
Set the brightness of the display. You can also tap AUTO to enable  
automatic brightness control.  
Notifications  
Switch to the ON position to show notifications on the System bar.  
Settings  
Tap to open Settings app main screen.  
Managing Notifications  
Notification icons report the arrival of new messages, calendar events, and  
alarms, as well as ongoing events.  
When you receive a notification, its icon appears in the System bar, along  
with a summary in brief.  
You can open the Notifications panel to view a list of all your notifications.  
Depending on your settings and the model of your tablet, you may also  
hear a notification sound.  
Adjusting sound volume and other general notification settings is described  
in Sound section in "Settings" chapter.  
Applications that produce notifications, such as Email, have their own  
settings, which you can use to configure whether and how they send  
notifications. See the sections describing those applications for details.  
Opening the notifications panel  
Tap the current time to open the notifications panel that lists the current  
notifications. Notifications of ongoing activities are listed first, followed by  
notifications of events, such as a new mail notification.  
You can also open the notifications panel in the lock screen when the tablet  
stays locked.  
Responding to a notification  
To respond to a notification, follow the below steps:  
User's Manual  
 
4-4  
 
TOSHIBA AT330  
1. Open the notifications panel.  
Your current notifications are listed in the panel, each with a brief  
description.  
2. Tap a notification to respond to it.  
The notifications panel closes. What happens next depends on the  
notification.  
Dismissing a notification  
You can dismiss a notification by sliding it sideways.  
Closing the notifications panel  
Tap the area out of the notifications panel to close the notifications panel.  
Locking your screen  
You can lock your screen so that only you can unlock it to access your  
data, run applications and so on. See Security section for other ways to  
protect your tablet and privacy.  
Locking your screen with a Pattern lock  
For example, you can use a Pattern lock to lock your screen with following  
steps.  
1. Open the security settings by tapping All Apps -> Settings ->  
Security.  
2. Tap Screen lock -> Pattern.  
The first time you open it, a short tutorial about creating an unlock pattern  
will appear. Then you’re prompted to draw and redraw your own pattern.  
Follow the onscreen instructions to finish the creation.  
The next time you turn on your tablet or wake up the screen, you will be  
prompted to draw your unlock pattern to unlock the screen.  
Capturing your screen  
You can capture a screenshot by simultaneously pressing and holding  
Power and Volume down button for about 2 seconds. The tablet will show  
the preview for a few seconds and save it.  
All the screenshots you captured can be viewed in Gallery or TOSHIBA  
File Manager. For more information, please refer to Chapter 5,  
Applications.  
Customizing the Home screen  
You can add application shortcuts or widgets to Home screens. You can  
also change the wallpaper.  
User's Manual  
 
4-5  
     
TOSHIBA AT330  
Adding an item to the Home screen  
To add an item to the Home screens, follow the steps listed below:  
1. Tap All Apps on the Home screen.  
2. Tap APPS or WIDGETS tab. You can also swipe left or right to move  
between screens.  
3. Press & hold an item and the Home screen will appear. Drag it to the  
place you want.  
Settings may be required before you can operate a Widget. You can  
tap widgets to open them.  
You can resize some widgets on the Home screen by following below  
steps:  
1. Press & hold the widget until it moves upward and a resize handle will  
appear on each side.  
2. Drag the resize handle to resize the widget.  
The number of widgets you can add depends on the size of each widget. If  
there is not enough room, the widget can’t be added.  
Moving an item on the Home screen  
To move an item on the Home screen, follow the steps below:  
1. Press & hold the item you want to move until its icon is magnified.  
Don’t lift your finger from the screen.  
2. Drag the item to a new location on the screen.  
It will pause at the left or right edge of the screen to drag the item onto  
extended Home screen.  
3. When the item is at expected place, lift your finger.  
Removing an item from the Home screen  
To remove an item from the Home screen, follow the steps below:  
1. Press & hold the item you want to remove until its icon moves upward.  
apperas on the top.  
2.  
Drag the item to  
.
3. When the icon glows red, lift your finger.  
Changing the wallpaper  
Wallpaper is an image used to replace the default background of your  
Home screen.  
1. Press & hold anywhere on the Home screen that is not occupied.  
2. Tap an option to select a wallpaper source.  
3. Tap Set wallpaper.  
User's Manual  
 
4-6  
TOSHIBA AT330  
Creating a grouped folder  
Folders provide an easy way to organize and manage your apps shortcuts.  
You can group several app icons into a folder.  
Drag and drop app icons on top of each other to automatically create a  
grouped folder. To rename the created folder, tap to open it and tap its  
name at the bottom to enter a new one.  
Press & hold an icon in the folder and drag it to the Home screen. When  
the folder has only one app icon, this folder will be automatically ungrouped  
leaving the last icon on the Home screen.  
Changing the Screen Orientation  
You can change the screen orientation to Portrait mode by rotating the  
tablet sideways. The screen orientation automatically changes according to  
the rotation angle detected.  
You can also lock the auto rotation and use the tablet always in Portrait or  
Landscape mode. These settings can be performed in the Display  
settings. Please refer to the Display section for details.  
In the Portrait mode, installation/uninstallation operation may not work for  
some of the drivers/utilities. If it occurs, switch to the Landscape mode.  
Managing Tasks and Applications  
You can manage some of the running applications, please follow the steps  
below:  
1. Tap All Apps -> Settings -> Apps.  
2. Tap an item you want to manage from DOWNLOADED/RUNNING/  
ALL tab.  
Please refer to Apps section in Settings chapter for details.  
You can close an item by tapping Force stop, or remove an item by  
tapping Uninstall.  
In order to improve the performance of your tablet, close some of the  
running applications.  
Connecting to a computer  
With a micro USB port on the tablet, you can connect your tablet to a  
computer for data transfer.  
To connect to a computer:  
User's Manual  
 
4-7  
     
TOSHIBA AT330  
1. Plug the Micro USB connector of a USB cable into the Micro USB port  
on this tablet.  
Figure 4-2 Connecting an USB cable  
1
2
1. Micro USB port  
2. Micro USB connector  
2. Plug the other end of the USB cable into the USB port on the  
computer.  
Depending on your settings, your tablet will be recognized as a removable  
MTP (Media Transfer Protocol) device or PTP (Picture Transfer Protocol)  
device allowing you to access its contents from a computer.  
If your computer does not support MTP, try using PTP for connection.  
To remove this tablet from a computer:  
1. Make sure all file operations are finished.  
2. Unplug the tablet from your computer.  
Make sure the connector is properly aligned with the socket. Do not try  
to force the connection, doing so can damage the connecting pins.  
If USB tethering is turned on, it must be turned off before sharing or  
transferring files.  
Factory Reset  
The tablet provides you with the function to reset it. Before executing the  
reset, you need to backup the system settings, application settings, user  
installed applications and data in the internal storage.  
To perform the factory data reset, please follow the steps below:  
1. Tap All Apps -> Backup & reset -> Factory data reset -> Reset  
tablet -> Erase everything.  
2. The factory data reset will be done.  
Please note that the following data will be erased:  
System settings and application settings  
User installed applications  
Internal storage files, such as music or photos  
User's Manual  
 
4-8  
 
TOSHIBA AT330  
Data in the removable media will not be erased.  
User's Manual  
 
4-9  
TOSHIBA AT330  
Chapter 5  
Applications  
This chapter describes the usage of applications & widgets.  
Your tablet has some Google Mobile™ services installed depending on the  
model you purchased.  
Analog clock  
Analog clock is a widget to display a clock on the Home screen based on  
the system time so that you can watch time directly from the clock.  
You can also use it to set an alarm clock. For details, please refer to the  
Clock section.  
Browser  
Browser is used to view webpages and to search for information on the  
web.  
To open the Browser, tap All Apps -> Browser.  
Browser can also open when you tap a web link, for example, in an email  
or text message.  
When you open Browser, the last webpage you viewed is displayed. If you  
have not used Browser recently, your home page will open.  
Go to a webpage  
1. Tap the URL box on the top of the Browser screen. If the URL box  
isn’t visible, drag the page down until the URL box comes into view.  
2. Enter the address (URL) of the webpage by using the onscreen  
keyboard.  
3. Tap a suggestion or enter an address and tap Enter with the onscreen  
keyboard.  
The Browser may not display some webpages correctly if the web  
page has a complicated layout. This is dependent on the web page.  
The Browser does not support file uploading function.  
The Browser might connect to a “mobile” website by default rather  
than a “PC” web site. Depending on the website, if you want to access  
the PC website, please tap Menu ( ) and check Request desktop  
site.  
User's Manual  
 
5-1  
     
TOSHIBA AT330  
Zoom in or zoom out on a webpage  
You can zoom in or out a webpage in either of the following ways.  
Double tap at the area where you want to zoom.  
Pinch two fingers together or apart to zoom out or zoom in on a  
webpage.  
Multiple Browser tabs  
You can open up to sixteen tabs and switch between them.  
Pages you view in incognito tabs will not leave any traces like browser  
history or search history on your tablet, however any files you downloaded  
will be saved.  
Open a new Browser window  
You may open a new Browser window in either of the following ways:  
Tap Menu ( ) and select New tab or New incognito tab.  
Tap  
beside the last tab.  
New window will open your home page.  
Switch between Browser windows  
You may switch between different Browser windows by tapping the tabs of  
browser windows.  
Close a Browser window  
You may tap the cross on the tab to close the current browser window.  
Bookmarks  
You may bookmark webs to open it conveniently.  
1.  
Tap the pentagram icon (  
) besides the URL bar.  
2. Enter a Label for the website or use the default Label.  
3. Tap OK to add it to Bookmarks.  
You can also add it to Home screen or Other folder by tapping and  
choosing from Add to menu.  
You may open the website from the bookmarks.  
1. Tap the bookmark icon (  
go to bookmarks.  
) at the upper right corner of the screen to  
2. Tap a page in the list to open it.  
View your Browser history  
As you browse the web, Browser will keep track of the pages you visit, to  
help you find your way back later.  
User's Manual  
 
5-2  
TOSHIBA AT330  
1. Tap the bookmark icon (  
) at the upper right corner of the screen.  
2. Tap the HISTORY tab.  
The pages you’ve visited are grouped chronologically. Bookmarked  
pages have a star.  
3. Tap a time period to view the pages you’ve visited.  
4. Tap a page in the history to reopen it.  
View your Saved Pages  
Pages you viewed in Browser can be saved for future reading. This is  
especially useful when your tablet stays offline.  
1. Tap the bookmark icon (  
) at the upper right corner of the screen.  
2. Tap the SAVED PAGES tab.  
The pages are grouped chronologically.  
3. Tap a page you want to open.  
Web page options  
By tapping Menu ( ), you can access a number of browser options like:  
Refresh , Forward , New tab, New incognito tab, Find on page, Share  
page, Request desktop site , Save for offline reading, Page info,  
Settings.  
Browser settings  
You can configure a number of Browser settings, including some that you  
can use to manage your privacy.  
To open the Browser settings screen, tap Menu ( ) -> Settings.  
There are six tabs: General, Privacy & Security, Accessibility,  
Advanced , Bandwidth management and Labs.  
Calculator  
You can use Calculator to solve simple arithmetical problems or use its  
advanced operators to solve more complex equations.  
1. Open Calculator by tapping All Apps -> Calculator.  
2. Enter numbers and arithmetical operators on the basic screen.  
3. Press & hold the Calculator’s display to select Copy or Cut the  
numbers.  
4. Tap Clear icon (  
) to delete the last number or operator you  
entered. Press & hold this icon to delete everything in the display.  
5. Tap CLR to clear the display after calculation.  
Calendar  
You can use Calendar to remind your date.  
User's Manual  
 
5-3  
   
TOSHIBA AT330  
Add events to Calendar  
You can add events to Calendar by following these steps:  
1. Tap any blank period on your calendar or the New Events icon (  
on the top right corner of Calendar screen.  
)
2. Enter Event name and set details for this date.  
You can add guests by entering their email addresses.  
3. Tap Done to save.  
Camera  
Camera is a combination of camera and camcorder that you can use to  
shoot and share pictures/videos. Pictures and videos can be viewed in the  
Gallery.  
Open Camera and take pictures/videos  
You can take pictures and shoot videos with the Camera.  
To open the Camera, tap All Apps -> Camera.  
Camera will open, ready to take a still picture. You can switch Camera to  
video or panorama mode anytime.  
The back camera is set for default. You can switch to front camera by  
tapping  
icon (option 2).  
Figure 5-1 Camera screen  
1
2
3
4
5
6
1. Go to Gallery  
3. Take a photo/video  
5. Digital zoom  
2. Select camera (front or back)  
4. Photo/Video options  
6. Choose photo, video or panorama mode  
Panorama mode  
Panorama mode allows you to take multiple subsequent photos and the  
tablet automatically join them together to create a single image with a wide-  
angle view.  
User's Manual  
 
5-4  
 
TOSHIBA AT330  
After the camera is set to panorama mode, you will select how shots will be  
stitched - slowly move the camera left to right or right to left.  
Review your pictures/videos  
You can review the pictures/videos you’ve taken in Camera.  
Tap the thumbnail image on the top right of the Camera screen to  
open the Gallery.  
For details, refer to the Gallery section.  
Photo options  
Several options are available by tapping the Quick Settings icon ( ).  
Flash mode ( ): Choose how the camera flash works.  
White balance ( ): Adjust the lighting conditions.  
Exposure ( ): Choose the value to change the exposure rate.  
Scene mode ( ): Choose your environment.  
Camera settings ( ): General settings can be found here.  
Store location  
Switch to ON to add location information to pictures you take.  
Picture size  
Choose the size of the pictures you take.  
Restore defaults  
Restore factory default settings.  
Video options  
Similarly, in Video mode, video options are available on video record  
screen.  
Flash mode ( ): Choose whether to turn on or off the camera flash.  
White balance ( ): Adjust for lighting conditions.  
Effects ( ): Pick a cool effect.  
Video quality: Tap to select the quality of the videos you take.  
Time lapse interval( ): Choose a time interval for time lapse  
recording.  
Camera settings ( ): General settings can be found here.  
Store location  
Switch to ON to add location information to pictures you take.  
Restore defaults  
Restore factory default settings.  
User's Manual  
 
5-5  
TOSHIBA AT330  
Clock  
In addition to displaying the date and time, you can also use Clock to set  
an alarm.  
To open Clock, tap All Apps -> Clock.  
Setting an alarm  
1.  
Tap the Set alarm icon ( ) below the time display.  
2. Tap an existing alarm clock to change its time and other attributes.  
Or tap Add alarm to add a new one.  
3. Tap Turn alarm on to activate this new alarm.  
4. Tap Time to set the time of the alarm.  
5. Tap Repeat to set the days when you want the alarm to sound.  
If you don’t set a repeat, the alarm sounds only once.  
6. Tap Ringtone to select a ringtone for the alarm.The ringtone plays  
when you select it.  
7. Tap Vibrate to enable vibration when the alarm sounds.  
8. Tap Label to enter a name for the alarm.  
9. Tap OK to finish.  
Downloads  
You can use the Downloads application to view and manage downloaded  
files.  
To open the Downloads, tap All apps -> Downloads.  
Email  
You can use the Email application to read and send emails. Email includes  
a wizard that makes it easy to configure it for several popular email service  
providers.  
To open the Email, tap All Apps -> Email.  
After you add an email account, next time when you open Email it will open  
to the last screen you were viewing. If you have not used Email recently, it  
will display the contents of your Inbox (if you have only one account) or the  
Accounts screen (if you have multiple accounts).  
If you have configured Email to send and receive emails from more than  
one account, you can view all emails sent to all accounts in your Combined  
Inbox.  
Read an email  
You can read emails in the Inbox or other folders for individual accounts.  
1. Open the combined Inbox, an account’s Inbox or another folder of  
emails.  
User's Manual  
5-6  
 
     
TOSHIBA AT330  
2. Tap the email to read. The email opens in a screen with information  
about who sent it, the date it was sent and related information on the  
top, followed by the contents of the email.  
Send an email  
You can send an email to your contacts or to other people.  
To send an email:  
1.  
Tap (  
) and enter the recipient, subject and message.  
2. Tap ( ) to add attachments.  
When you enter text in the To: field, your tablet shows possible matches  
from your Contacts list, if any exist.  
Respond to an email  
You can reply to or forward an email that you’ve received. You can also  
delete emails and manage them in other ways.  
While reading an email, tap one of the icon (  
) on the top to execute  
Reply, Reply all, or Forward.  
Manage email accounts  
The Email application enables you to add email accounts from popular  
web-based email service providers. You can also delete an email account  
or edit an email account settings.  
To add an email account:  
Tap Menu -> settings -> Add account.  
To delete an email account:  
1. Tap Menu -> settings.  
2. Tap the account you want to delete. On the options menu, tap  
Remove account and then tap OK.  
To edit an email account settings:  
Tap Menu -> settings.  
You can make any changes to general, notification or server settings  
from this screen.  
Gallery  
You can use Gallery to view pictures and play videos that you’ve taken  
with the Camera, downloaded or copied onto your tablet.  
Open Gallery  
To open Gallery to view your pictures and videos, tap All apps -> Gallery.  
User's Manual  
5-7  
 
 
TOSHIBA AT330  
Gallery presents the pictures and videos on your tablet, including those  
you’ve taken with Camera and those you downloaded from the web or  
other locations.  
If you have a large number of pictures or videos on your tablet, it may  
take Gallery a few minutes when you open it to discover and organize  
them.  
Gallery will display all images and videos without distinction of internal  
or external storage.  
View and browse pictures/videos  
All the albums are displayed in the screen.  
1. Tap an album to open it and view its contents. The pictures and videos  
in the album are displayed in chronological order. You can view the  
pictures and videos in your albums in stacks, sorted By albums,  
times, locations, people and tags.  
2. Tap a picture or video in an album to view it.  
You can pinch the picture by two fingers or apart to zoom in or zoom  
out. Slide left or right to view other pictures/videos.  
You can also return to the previous screen at any time by tapping  
Gallery icon (  
) on the top left of the screen.  
Take pictures/videos  
You can also tap the camera icon on the top right corner of the screen to  
take pictures or videos directly. Please refer to the Camera section for  
more information.  
Work with pictures/videos  
After opening a picture or a video, you can work with it as follows:  
1. Start a slideshow: Tap  
.
2. Share photo: Tap to send the photo in a message, transfer it using  
Bluetooth, email, or post it online.  
3.  
Delete photo: Tap  
.
4. Tap Menu icon ( ) to see slideshow, details, edit, rotate, crop, or set  
picture as a contact photo or wallpaper.  
Play Music  
You can use Play Music to organize and listen to music and other audio  
files that are in your tablet, SD card or USB storage.  
Play Music supports a wide variety of audio files formats so it can play  
music that you purchase from online stores, or copied from external  
User's Manual  
 
5-8  
 
TOSHIBA AT330  
storage and so on. For the details of supported formats, please refer to  
TOSHIBA Media Player in this chapter.  
To open the Play Music screen, tap All Apps -> Play Music.  
The Play Music library screen will open with tabs that you can tap to view  
your music library organized by Recent, Albums, Artists, Songs,  
Playlists or Genres.  
Playing Music  
You can listen to music by using your tablet’s built-in speakers.  
To play music:  
Tap a song in your library to listen to it.  
Working with playlists  
You can create playlists to organize your music files into sets of songs,  
which you can play in the order you set or in a shuffle.  
To create a playlist:  
1. Tap sort tab on the Play Music library screen and choose Playlists  
tab.  
2. Tap plus icon to add a new playlist.  
3. Enter a name and tap OK to save.The new playlist is added to the  
Playlist library.  
You can add other songs that are playing in the Now playing screen in a  
playlist by tapping Menu and tapping Add to playlist.  
Choose an existing playlist, or tap New playlist to create a new playlist.To  
edit, delete, and rename a playlist, press & hold the playlist.  
To edit, delete, and rename a playlist, press & hold the playlist.  
People  
People gives you quick and easy access to the people you want to reach.  
Information about your contacts is shared with other applications, such as  
Gallery (for sharing photos and videos) and so on.  
If you have more than one account with contact information, People  
merges duplicate contacts into a single entry. You can also manage that  
process manually.  
Open People  
To open your contact, tap All Apps -> People.  
All of your contacts are displayed alphabetically in a scrolling list.  
Tap a contact to view the details. Entries for communicating with the  
contact are followed by details. Tap a communication method to start  
texting or emailing the contact by using the listed number, address and so  
on.  
User's Manual  
 
5-9  
 
TOSHIBA AT330  
Import and export contacts  
If you have contacts stored in vCard format in the Internal storage, you can  
import them into Contacts on your tablet. You can also copy contacts from  
SD card by TOSHIBA File Manager. You can export contacts in vCard  
format onto an SD card for backup using TOSHIBA File Manager. You can  
also send a contact via email or Bluetooth.  
Search for a contact  
You can search for a contact by name.  
1. Tap Find contacts ( ). The search box appears.  
2. Start entering the name or number of the contact you’re searching for.  
As you type, contacts with matching names appear below the search  
box.  
3. Tap a matching contact in the list to open its details screen.  
Service Station  
The Service Station utility is used to provide you with updates for both  
application and system software. It will notify you when a new version of  
software is available, also it initiates for download & installation.  
To open Service Station:  
Tap All Apps -> Service Station.  
When you run the Service Station for the first time, you are prompted to  
accept the access agreement. The agreement authorizes the utility to  
collect certain basic information about your tablet and send it to the  
TOSHIBA servers as part of the process of obtaining updates. Accept or  
Decline the agreement by tapping the buttons. While it is possible to  
decline the agreement, it is not recommended, as this means the Service  
Station utility will not run, and you will not be notified of new software  
updates for your tablet.  
Main Window  
The main window of this application includes three areas: Header,  
Buttons, and Information.  
Header  
This section runs along the top of the screen, and contains basic  
information about your system such as the version of the operating  
system, the tablet part number and serial number.  
Buttons  
Buttons are displayed on the screen. These buttons will change,  
depending on what actions you have available on the current screen.  
User's Manual  
 
5-10  
 
TOSHIBA AT330  
Information  
The main part of the screen displays information such as the list of  
available updates, or more detailed information about a specific  
update.  
Check for Updates  
During normal operations, the Service Station will periodically check to see  
if there are any updates for your system. This is done automatically. If there  
are new updates available, you will be notified with the Service Station icon  
in the System bar of your tablet.  
While the Service Station will periodically check for updates in the  
background, you can request that it check for updates immediately. Tap the  
Check for Updates button, and the application will refresh the list of  
available updates.  
It is not normally necessary to check for updates manually, as the  
utility checks for them automatically and informs you when one is  
available.  
Please connect the AC adaptor before updating.  
Downloading Updates  
When an update is available, it will appear on the information area of the  
screen. Tap the item displayed. More details for that item are displayed on  
the screen.  
To download the update, tap the Download button. This will begin the  
download process. A progress indicator is displayed.  
Tapping Home (  
) allows the download to continue while you use  
your tablet. A notification of the download completion will appear in the  
system status bar.  
Tapping Back (  
) will abort the download process.  
Installing Updates  
Once an update has been downloaded, it can be installed. If you are not  
able to see the information in System bar, go to the screen by launching  
the Service Station utility, or by tapping the download completion notice on  
the system status bar.  
Tap the Install button. This will launch the application installer. Continue  
with installation.  
User's Manual  
 
5-11  
TOSHIBA AT330  
Downloading and Installing System Updates  
Service Station will download both application and system updates. System  
updates require that your tablet is rebooted during the update.  
Downloading a system update is the same as an application update.  
Installing a system update is similar to an application update, but you will  
be reminded that the tablet will be rebooted during the installation process.  
Make sure to close any other applications and save all work prior to  
installing a system update.  
It is important that a system update is not interrupted once it has begun.  
Make sure the AC power is plugged in before beginning the installation and  
don’t turn the tablet off while the installation is in progress.  
Note that the system may reboot more than once during an system update,  
depending on the update itself.  
This application only updates system area in the internal storage. User  
data area is retained after the system is updated.  
TOSHIBA Media Player  
TOSHIBA Media Player is a multimedia player where user can experience  
and enjoy outstanding multimedia playback.  
TOSHIBA Media Player supports common multimedia playback such as  
video (e.g. H.264/AVC, MPEG-4), music (e.g. MP3, AAC-LC) and photo  
(e.g. JPEG, PNG).  
To open TOSHIBA Media Player, tap All Apps -> Media Player from the  
Home screen.  
TOSHIBA does not guarantee that all the audio/video files with the above  
coding will be played correctly.  
TOSHIBA Media Player has five panels: Music, Videos, Photos,  
Podcasts and Downloads. You can switch between these panels by  
swiping left/right.  
TOSHIBA Media Player supports home network functions such as DMS  
(Digital Media Server), DMC (Digital Media Controller) and DMP (Digital  
Media Player).  
Connectable Digital Media Servers  
TOSHIBA Media Player supports browsing DMS that has search  
function only. That is, it only supports Windows Media Player Network  
Sharing Service in Microsoft® Windows® 7.  
User's Manual  
 
5-12  
 
TOSHIBA AT330  
Connectable Digital Media Renderers  
Toshiba Media Player is connectable with the following DMRs.  
Microsoft Windows Media Player 12 in Microsoft Windows 7  
Toshiba TV with DMR functions  
Do not eject (or unmount) external media during contents search as  
this will cause music playback to stop.  
Some "double-byte" characters might not be displayed correctly. This  
is the Operating System limitation.  
TOSHIBA File Manager  
TOSHIBA File Manager is a featured application that manages files and  
folders. It allows you to create, rename, copy, cut, paste or delete files and  
folders stored in both internal and external storage.  
To open TOSHIBA File Manager, tap All Apps -> File Manager from the  
Home screen.  
System files cannot be accessed by TOSHIBA File Manager.  
TOSHIBA File Manager may not be able to open a file without its  
associated application.  
Navigation  
The main window of TOSHIBA File Manager is divided into four panels.  
Each panel’s function is described as below.  
Device panel  
Device panel lists icons of available storage devices. By default you  
will see Internal Storage and Screen Capture icon. You are also  
allowed to add folder shortcut into this panel.  
Address panel  
Address panel shows you the current device name followed by relative  
(not full) path of current folder.  
Control panel  
Control panel contains several functional icons for file and folder  
operations.  
Files and folders panel  
Explore files and folders with optional layout in this panel. You can  
easily read and collect additional information such as size, thumbnail  
of the files, name and last modified date and time of the folders. When  
items are selected, they are tagged with a tick.  
User's Manual  
 
5-13  
 
TOSHIBA AT330  
Operations on Files & Folders  
Basic operations  
Basic file and folder operations include Cut, Copy, Paste and Delete.  
Press & hold an item to select it while enabling the multi-selection mode,  
therefore these command buttons will be visible in the Control panel.  
Select All  
Tap  
to open the menu and tap Select All.  
Deselect All  
Tap  
to open the menu and tap Deselect All.  
Cancel Selection  
Tap Done to cancel selection.  
Copy, Cut and Paste  
Tap Copy(  
) or Cut(  
) in the Control panel. After TOSHIBA File  
Manager exits the multi-selection mode, you can redirect to a folder  
where to paste the selected items. Tap Paste (  
panel to complete the operation.  
Delete  
) in the Control  
Tap Delete(  
) in the Control panel to delete the item(s) you have  
selected. Confirm the operation by tapping OK.  
Grid/List view  
You can change how files and folders appear by simply tapping Grid/List  
view switching icon( ) in the Control panel.  
Grid view(  
By default, files and folders are shown in a gird.  
List view(  
)
)
Files and folders are shown in a scrolling list enabling you to view  
detailed information about an item.  
Creating a folder  
You can create a folder by following below steps:  
1. Navigate to the directory where to create a new folder.  
2. Tap  
in the Control panel.  
3. A dialog will appear, enter the folder name and tap OK.  
Renaming a file or a folder  
You can rename a file or folder by following the steps below:  
1. Press & hold a file or folder you want to rename.  
2. Tap to open the menu and tap Rename.  
3. A dialog will appear. Enter a new folder name and tap OK.  
User's Manual  
 
5-14  
TOSHIBA AT330  
Sorting files and folders  
You can sort and view files and folders by name, time, size and type.  
1. Tap in the Control panel.  
2. Tap By name, By size, By time or By type as you want.  
By default, items are arranged in ascending order. Simply tap the option to  
switch to descending order.  
Adding folder shortcut  
Folder shortcut makes it faster to access the folder. TOSHIBA File  
Manager is designed to create folder shortcut in the Device panel.  
1. Press & hold a folder and to open the menu.  
2. Tap Add to shortcut to add it to the Device panel.  
The operation is only applicable to folders saved in the internal  
storage.  
To remove a folder shortcut from the Device panel, simply press &  
hold the shortcut and tap OK. However, the storage device icon  
cannot be removed.  
Storage Structure  
The following table lists the description of each storage device icon in the  
Device panel.  
TOSHIBA File Manager only shows the storage device connected to the  
tablet.  
Name  
Description  
Internal Storage  
All contents (excluding system files) in the  
tablet’s internal storage are shown.  
SD card  
All contents in SD card are shown.  
USB Storage (0-7)  
Screen Capture  
Supporting up to eight USB storage devices  
connected to tablet.  
Screenshots image files are shown.  
Please refer to the Capturing your screen section  
for more information.  
User's Manual  
 
5-15  
TOSHIBA AT330  
Online Manual  
Online Manual is an application to launch the pre-installed online manual  
(this manual) for this tablet.  
User's Manual  
 
5-16  
 
TOSHIBA AT330  
Chapter 6  
Settings  
This chapter describes the Settings app - a quick and easy access to four  
groups of global options that allows you to configure how your tablet  
communicates and functions.  
A scrollbar is displayed on the right side of the screen. This scrollbar is only  
used to show the position of the displaying area. You can scroll the screen  
using your fingers.  
Wireless & networks  
Your tablet can connect to a variety of networks and devices, mobile  
networks for voice and data transmission, Wi-Fi data networks and  
Bluetooth devices, such as headsets.  
Options under Wireless & networks, which are briefly described below,  
are used to configure and manage these connections. You can tap More to  
find out the hidden options.  
Please refer to the following sections in this chapter for more details.  
Wi-Fi  
Tap to see available Wi-Fi networks when Wi-Fi is turned on.  
Bluetooth  
Tap to see available Bluetooth devices when Bluetooth is turned on.  
Data usage  
Tap to monitor your current or historical data using.  
Airplane mode  
Check to enable Airplane mode.  
All wireless communications that transmit data are disabled when in  
Airplane mode.  
VPN  
Tap to set up and manage Virtual Private Networks (VPNs).  
Tethering & portable hotspot  
You can share your tablet’s mobile data connection with other devices  
(up to 8) via USB, Bluetooth, or by turning your tablet into a portable  
Wi-Fi hotspot.  
Tap to adjust these settings.  
User's Manual  
 
6-1  
   
TOSHIBA AT330  
NFC  
Some models support Near Field Communication (NFC) which allows  
you to share data between devices when they touch each other or are  
brought into close proximity.  
Wi-Fi direct  
Wi-Fi direct allows you to directly connect to devices nearby via Wi-Fi  
for much higher-speed wireless communication. You can share files or  
streaming videos/audios from other compatible devices.  
Tap to enable Wi-Fi direct.  
Wi-Fi networks  
Wi-Fi is a wireless networking technology that can provide Internet access  
at distances of up to 100 meters, depending on the Wi-Fi router and your  
surroundings.  
To use Wi-Fi on your tablet, you need to access a wireless access point, or  
“hotspot”. If access points are open, you can simply connect to them.  
Others are hidden or implement other security features, so you must  
configure your tablet so it can connect to them.  
There are numerous systems for securing Wi-Fi connections, including  
some that rely on secure certificates or other schemes to ensure that only  
authorized users can connect.  
Turn off Wi-Fi when you are not using it to extend the life of your battery.  
The Status bar displays icons that indicate Wi-Fi status.  
Connected to a Wi-Fi network (waves indicate the  
wireless connection strength)  
Notification that an open Wi-Fi network is in range  
Turning Wi-Fi on and connecting to a Wi-Fi network  
You can turn on and connect to a Wi-Fi network by following steps:  
1. Open the Settings app from All Apps.  
2. Under Wireless & networks, tap Wi-Fi.  
3. Slide the Wi-Fi switch to the ON position.  
The tablet scans for available Wi-Fi networks and displays the names  
of those it finds. Secured networks are indicated with a lock icon.  
If the tablet finds a network that you connected to previously, it will connect  
to it automatically.  
User's Manual  
 
6-2  
TOSHIBA AT330  
4. Tap a network name to see more details.  
If the network is open, you are prompted to confirm that you want to  
connect to that network by tapping Connect.  
If the network is secured, you’re prompted to enter a password or  
other credentials. (Ask your network administrator for details.)  
When you have connected to a network, tap on the network name for  
details about the status, signal strength, link speed, security type and  
IP address.  
Adding a Wi-Fi network  
You can add a Wi-Fi network so the tablet will remember it, along with any  
security credentials, and connect to it automatically when it is in range. You  
must also add a Wi-Fi network to connect to it, if it does not broadcast its  
name (SSID), or to add a Wi-Fi network when you are out of range.  
To join a secured network, you need to contact the network’s administrator  
to learn what security system is deployed and to obtain the password or  
other required security credentials.  
1. Turn on Wi-Fi if it is not already on.  
2. In the Wi-Fi settings screen, tap ADD NETWORK.  
3. Enter the Network SSID (name). If the network is secured, tap  
Security and then tap the type of security deployed on the network.  
4. Enter the required security credentials.  
5. Tap Save.  
The tablet will connect to the wireless network. Any credentials that  
you enter will be saved, so you can connect automatically the next  
time you come within range of this network.  
Forgetting a Wi-Fi network  
You can make your tablet forget about the details of a Wi-Fi network that  
you added. For example, if you don’t want the tablet to connect to it  
automatically or if it is a network that you no longer use.  
1. Turn on Wi-Fi if it’s not already on.  
2. In the Wi-Fi settings screen, tap the network name.  
3. Tap Forget in the dialog that opens.  
Modifying a Wi-Fi network  
You can modify each connected Wi-Fi network settings including  
credentials, proxy server settings and IP settings.  
Proxy server settings may be required for some internal or external network  
connection. By default, the Wi-Fi networks you add are not configured to  
connect via a proxy server, but you can change that for each Wi-Fi network  
you've added.  
User's Manual  
 
6-3  
TOSHIBA AT330  
Proxy settings are used by Browser and may not be used by other apps.  
1. In the Wi-Fi settings screen, press & hold the network name you have  
added.  
2. Tap Modify network.  
3. Check Show advanced options.  
4. If the network has no proxy settings, tap None and select Manual.  
5. Enter the required proxy settings you have obtained.  
6. Tap Save.  
A static IP address may also be manually configured for some network. By  
default, the Wi-Fi networks you add are configured for automatic IP  
assignment. You can change it for each Wi-Fi network you've added.  
1. In the Wi-Fi settings screen, press & hold the network name you have  
added.  
2. Tap Modify network.  
3. Check Show advanced options.  
4. If the network has no manual IP settings, tap DHCP and select Static.  
5. Enter the required IP address you have obtained.  
6. Tap Save.  
Advanced Wi-Fi settings  
Advanced Wi-Fi settings are available following the steps below.  
1. Turn on Wi-Fi if it is not already on.  
2. In the Wi-Fi settings screen, Tap the Menu icon ( ) and tap  
Advanced.  
Several options are described below.  
Network notifications  
By default, when Wi-Fi is on, you receive notifications in the Status bar  
when your tablet detects an open Wi-Fi network. Uncheck this option  
to turn off notifications  
Keep Wi-Fi on during sleep  
By default, your tablet stays connected to Wi-Fi when the screen goes  
to sleep.  
Tap this option to change this default setting: either to stay connected  
to Wi-Fi only when the tablet is connected to the AC adaptor or never  
to stay connected to Wi-Fi during sleep. The latter choice is likely to  
increase mobile data usage. You may want to revisit this setting if you  
receive a notification that you're approaching your specified mobile  
data limit.  
User's Manual  
 
6-4  
TOSHIBA AT330  
Bluetooth  
Bluetooth is a short-range wireless communications technology that  
devices can use to exchange information over a distance of about 8  
meters. The most common Bluetooth devices are headphones for making  
calls or listening to music, hands-free kits for cars, and other portable  
devices, including cell phones.  
This tablet does not support Bluetooth connections via ad-hoc network.  
To connect to a Bluetooth device, you must turn on your tablet’s Bluetooth  
radio. The first time you use a new Bluetooth device, you must “pair” it with  
your tablet so that they connect securely to each other. After that, you can  
simply connect to a paired device.  
Turn off Bluetooth when you’re not using it, to extend the life of your battery  
between charges. You may also be required to turn Bluetooth off in some  
locations. Bluetooth is turned off in Airplane mode.  
Status bar icons indicate Bluetooth status.  
Turning Bluetooth on or off  
1. Open the Settings app from All Apps.  
2. Under Wireless & Networks, tap Bluetooth.  
3. Slide the Bluetooth switch to the ON position.  
Changing your tablet’s Bluetooth name  
Your tablet has a generic Bluetooth name by default, which is visible to  
other devices when your connect them. You can change the name so that  
it is more recognizable.  
1. Open the Settings app from All Apps.  
2. Make sure that the Bluetooth is turned on.  
3. In the Bluetooth settings screen, Tap the Menu icon ( ) and tap  
Rename tablet.  
4. Enter a new name for your tablet.  
5. Tap Rename to complete the operation.  
Pairing your tablet with a Bluetooth device  
You must pair your tablet with another device before you can connect to it.  
Once you pair your tablet with another device, they stay paired unless you  
unpair them.  
1. Open the Settings app from All Apps.  
User's Manual  
 
6-5  
TOSHIBA AT330  
2. Make sure that the Bluetooth is turned on.  
Your tablet will scan for and display the names of all available  
Bluetooth devices in range.  
If the device you want to pair with is not included in the list, make it  
discoverable. See the documentation that came with your device to  
learn how to make it discoverable by your tablet, and for other  
instructions for pairing.  
3. If your tablet stops scanning before you make the other device  
discoverable, tap SEARCH FOR DEVICES.  
4. Tap on the name of the Bluetooth device in the list to pair it.  
The devices pair with each other. If you’re prompted to enter a  
passkey, try entering 0000 or 1234 (the most common default  
passkeys), or consult the documentation that came with the device to  
learn its passkey. If the pairing is successful, that means your tablet is  
connected to the device.  
Connecting to a Bluetooth device  
Once paired, you can connect to a Bluetooth device. For example, to  
switch between devices or to reconnect after your tablet and this device  
come back into range.  
1. Open the Settings app from All Apps.  
2. Make sure that the Bluetooth is turned on.  
3. In the list of Bluetooth devices, tap a paired but unconnected device. If  
the device you expected isn’t displayed, tap SEARCH DEVICES.  
When your tablet and this device are connected, this device is shown  
as connected in the Paired Devices list.  
Configuring a Bluetooth device  
Some Bluetooth devices have multiple profiles. Profiles can include the  
ability to transmit your conversations, play music in stereo, or transfer files  
or other data. You can select profiles you want to use with your tablet. You  
can also change the name of the Bluetooth device as it appears on your  
tablet.  
1. Make sure that the Bluetooth is turned on.  
2. Tap the Quick Settings icon ( ) beside a paired Bluetooth device.  
A screen opens that allows you change the device profile or unpair it.  
Data usage  
Some of the features described in this section apply only to models with 3G  
modules.  
Data usage refers to the amount of data uploaded or downloaded by your  
tablet during a given period. Additional fees may be charged when the data  
User's Manual  
 
6-6  
TOSHIBA AT330  
usage exceeds the limit depending on your wireless service provider’s  
plan.  
Data usage settings allow you to:  
Set data usage limit  
Set data usage warning level  
View or restrict data usage by app  
It is suggested that you check your wireless service provider’s plan and  
determine what data usage limit may apply before adjusting the data usage  
settings.  
The information displayed on the data usage settings screen is measured  
by your tablet. Your wireless service provider’s data usage accounting may  
differ. Steep overage charge is possible in excess of your wireless service  
provider’s data limits.  
Data usage can help you to view and track data usage but it is not  
guaranteed to prevent additional charges.  
Setting data usage  
Data usage of each network type (Mobile, Wi-Fi or Ethernet) are illustrated.  
By default, Wi-Fi or mobile network is displayed. Tap the network tab to  
switch between them.  
Tap Data usage cycle to choose a different cycle. This date range is the  
period for which data usage is displayed in the graph below.  
The vertical white lines on the graph show a period of time within the data  
usage cycle. You can drag the lines to change the period which determines  
the total data usage amount below the graph.  
The orange line indicate the level where you want to receive a warning  
notification when the data usage reaches this level. Drag the line to adjust  
the level.  
The red line indicating the data limit appears after you check Set mobile  
data limit. Drag the line to the limit you want. When the data usage  
reaches the limit, mobile network will be turned off automatically. You will  
receive a notification.  
Managing data usage by app  
Some apps transfer data in the background and restricting background  
data usage for individual apps can sometimes be a useful way to reduce  
your overall data usage (however, this may also affect the app's  
performance or cause it to malfunction). Check whether data usage can be  
restricted from the app's own settings before restricting it here.  
Device  
Options under Device allow you to fine tune your tablet hardware.  
User's Manual  
6-7  
 
 
TOSHIBA AT330  
Sound  
You tablet uses sounds and vibrations to communicate with you. You can  
configure and customize any of those including notifications, ringtones,  
alarms and feedback on your navigations.  
Sound contains the following options:  
Volumes  
Tap to open a dialog where you can drag a slider to set the volume  
separately for music, video, games, & other media, notifications and  
alarms.  
Ringtone & Notifications  
Default notification  
Tap to open a dialog where you can set the default notification  
tone when you receive a notification.  
System  
Touch sounds  
Check this option to play sound when tapping the screen.  
Screen lock sound  
Check this option to play sound when locking and unlocking the  
screen.  
Haptics  
Check this option to configure vibration feedback and Reverb  
effect.  
The tablet will produce virtual vibration from the sound wave while  
playing multimedia or games.  
Display  
You can use Display settings to configure the brightness and other screen  
settings.  
Display contains the following options:  
Brightness  
Tap to open a dialog and drag the slider left or right to adjust the  
screen brightness. Check Automatic brightness to disable manual  
brightness control.  
Wallpaper  
Tap to select a wallpaper source and change wallpaper.  
Auto-rotate screen  
Check to lock screen orientation as you turn your tablet sideways.  
Sleep  
Tap to open a dialog where you can set the time of inactivity before  
the tablet goes to sleep.  
User's Manual  
 
6-8  
   
TOSHIBA AT330  
Multi function switch settings  
Tap to open a dialog where you can select how the switch will work.  
Font size  
Tap to open a dialog where you can select the font size on the user  
interface.  
Enable Balanced Power  
Check this option to enable power saving.  
HDMI video mode  
Tap to switch between HDMI video output mode.  
Video enhancement  
You can switch to the ON position to enable video enhancement with  
Adaptive Display powered by Toshiba Technologies.  
Some contents and applications may not be supported by the video  
enhancement function.  
Battery life may be affected by the configuration of the video enhancement  
function  
Detailed settings are available only after video enhancement is enabled.  
Video demo mode  
Check this option to enable video enhancement preview - half of the  
video playback area is enhanced while the other is not.  
Video quality  
Tap to select video quality.  
Audio enhancement  
You can switch to the ON position to enable audio enhancement powered  
by Toshiba & SRS Technologies.  
Detailed settings are available only after audio enhancement is enabled.  
Some contents and applications may not be supported by the audio  
enhancement function.  
Battery life may be affected by the configuration of the audio enhancement  
function.  
SRS Premium Voice PRO information  
SRS Premium Voice PRO™ provides a superior voice communication and  
multimedia experience for the PC.  
User's Manual  
 
6-9  
TOSHIBA AT330  
Storage  
Storage shows your internal storage and external storage status.  
Internal storage  
Internal storage contains the following options:  
Total Space  
Shows the total memory space of internal storage in your tablet.  
Apps  
The amount of application data of internal storage.  
Downloads  
The amount of downloaded data of internal storage.  
Pictures, Videos  
The amount of picture and video data of internal storage.  
Audio (music, ringtones, podcasts etc.)  
The amount of audio data of internal storage.  
Misc.  
The amount of miscellaneous data of internal storage.  
Available  
Shows the free space of internal storage.  
SD card  
SD card contains the following options after you insert an SD card.  
Unmount SD card  
Tap to unmount the SD card for safe removal.  
USB storage  
USB storage contains the following options depending on the devices that  
you have inserted:  
Unmount USB0 - Unmount USB7  
Tap to unmount the USB memory device for safe removal.  
USB computer connection  
You can choose how the USB port works by tapping the Menu icon (  
)
and select USB computer connection. Please refer to the Connecting to  
a computer section for more details.  
Battery  
Battery allows you to check what is using the battery and the battery  
usage data.  
User's Manual  
 
6-10  
TOSHIBA AT330  
Tap to open a list of the applications and operating system components  
you have used since you last connected the tablet to a power source,  
sorted by the amount of power they have used.  
Tap REFRESH on the top of the screen to reload the list.  
Apps  
You can use the Apps settings to view details about the applications  
installed on your tablet, to manage their data and force them to stop.  
You'll see three tabs at the top of the screen, each displaying a list of apps  
or their components.  
Downloaded  
Tap to open a list of all downloaded applications installed on your  
tablet, along with their size. They are sorted by name alphabetically by  
default.  
Running  
Tap to open a list of all applications, services (applications or parts of  
applications that provide services to other applications or that run even  
when their main application isn’t running), processes that are currently  
running and how much memory they are using. Depending on the  
service, when you tap it in the list it will either open a dialog where you  
can stop it or open its Settings screen.  
All  
Tap to open a list of all applications that you downloaded and all  
applications that came with your tablet.  
You can tap the Menu icon ( ) and select Sort by size to switch the order  
of the lists in Downloaded or All tabs.  
This tablet does not support another Operating System.  
TOSHIBA cannot guarantee or support applications that are installed  
by a user.  
Personal  
Options under Personal allow you to manage personal accounts, data  
backup and security.  
Accounts & sync  
You can manage your mail or exchange accounts by using Accounts &  
sync settings.  
Tap ADD ACCOUNT on the top right of the screen to add a mail account  
or an exchange account. You can sync your contacts, calendar or other  
applications data via an exchange account.  
You can tap to edit an account. Settings vary with different account type.  
User's Manual  
 
6-11  
   
TOSHIBA AT330  
Location services  
You can use Location services settings to configure location related  
settings.  
Location services contains the following options:  
Google’s location service  
Check this option to allow your apps to use data from sources such as  
Wi-Fi or mobile networks to determine your approximate location.  
GPS satellites  
Check this option to find your location via GPS satellites.  
Location & Google search  
Check this option to let Google improve search results and other  
services by using your location.  
Security  
You can use Security settings to configure settings that help secure your  
tablet and its data.  
Security contains the following options:  
Screen Security  
Screen lock  
Tap to open a screen where you can configure the tablet to lock  
screen with a slide, pattern, PIN or password. You can also  
choose None to disable screen lock.  
Owner info  
Tap to open a dialog where you can enter text to display on the  
lock screen.  
Encryption  
Encrypt tablet  
Tap to open a dialog where you can set numeric PIN or password  
to decrypt your tablet each time you power it on.  
A PIN or password must be set (using Screen lock option) before  
encrypting your tablet.  
Passwords  
Make passwords visible  
Check this option to show each password character as you enter  
them, so that you can see what you enter.  
User's Manual  
 
6-12  
 
TOSHIBA AT330  
Device Administration  
Device administrators  
Tap to open a screen where you can view and manage device  
administrators.  
Unknown sources  
Check this option to permit the installation of applications that are  
not downloaded from or available on the Google Play Store app.  
Credential Storage  
Trusted credentials  
Tap to open a screen where you can allow applications to access  
your tablet’s encrypted store of secure certificates and related  
passwords and other credentials. You can use credential storage  
to establish some kinds of Wi-Fi connections. If you have not set  
a password for credential storage, this setting is grayed.  
Install from storage  
Tap to install a secure certificate from the storage.  
Clear credentials  
Tap to delete all secure certificates and related credentials and  
erases the secure storage’s own password, after prompting you  
to confirm that you want to do this.  
Language & input  
You can use Language & input settings to select the language for the text,  
voice input and voice output on your tablet and for configuring the onscreen  
keyboard, including words that you’ve added to its dictionary.  
Language  
Tap to select the system language from a list.  
Spelling correction  
Tap to enable automatic spelling correction to fix misspelled words  
more easily.  
Tap the Quick settings icon ( ) besides the option to select the target  
language.  
Personal dictionary  
Tap to open your personal dictionary. To add your words, tap ADD on  
the top of the screen.  
Keyboard & Input Methods  
Default  
Tap to open a dialog where you can select the default input  
method you want to use, if you have more than one installed, tap  
Configure input methods to open the screen where you can  
configure each input method.  
User's Manual  
 
6-13  
TOSHIBA AT330  
Physical Keyboard  
Configure External Keyboard Language  
Tap to set up language for external keyboard.  
Speech  
Text-to-speech output  
Tap to open a screen where you can set the text-to-speech  
engine required for text-to-speech function.  
Mouse/Trackpad  
Pointer speed  
Tap to configure the mouse pointer speed by dragging the slider  
left or right.  
Backup & reset  
You can use the Backup & reset settings to manage your personal data.  
Backup & Restore  
Back up my data  
Check this option to back up application data, Wi-Fi passwords,  
and other settings to Google™ servers.  
Backup account  
Tap to display the Google Account that your settings and other  
data are backed up with.  
Automatic restore  
Check this option to restore backup settings or other data when  
you reinstall an application.  
Personal Data  
Factory data reset  
Tap to erase all user data in the internal storage. Follow the on-  
screen instructions to reset it. Please note that data in the  
removable media won’t be erased. Please refer to the section  
Factory Reset in "Basic" chapter for details.  
System  
Date & time  
You can use Date & time settings to set your preferences for how dates  
are displayed. You can also use these settings to set your own time and  
time zone, rather than obtaining the current time from the mobile network.  
Automatic date & time  
Uncheck this option to set the date & time on the tablet manually  
rather than obtaining the current time from the network.  
User's Manual  
6-14  
 
 
TOSHIBA AT330  
Automatic date & time Settings  
Setup an NTP server address and the interval for automatic date &  
time synchronization.  
Set date  
If Automatic date & time is unchecked, tapping it will open a dialog  
where you can manually set the date.  
The system date cannot be set beyond Jan/18/2038.  
Set time  
If Automatic date & time is unchecked, tapping it will open a dialog  
where you can manually set the time.  
Select time zone  
If Automatic time zone is unchecked, tapping it will open a dialog  
where you can set the tablet’s time zone.  
Use 24-hour format  
Check this option to display the time using 24-hour time format - for  
example, 13:00 rather than 1:00 pm.  
Select date format  
Tap to open a dialog where you can select the format for displaying  
dates.  
Accessibility  
You can use Accessibility settings to enable accessibility functions, such  
as reading or enlarging text on the screen.  
TalkBack  
Check to enable TalkBack which provides spoken feedback to help  
blind and low-vision users.  
Large text  
Check to increase the default font size used across the system for  
better readability.  
Auto-rotate screen  
Check to lock screen orientation as you turn your tablet sideways.  
Speak passwords  
Check to enable this function that allows the tablet to speak the  
passwords while you are typing.  
Touch & hold delay  
Tap to open a dialog where you can select the response speed for  
Touch & hold operation.  
Install web scripts  
Tap to allow apps to install scripts from Google™.  
User's Manual  
 
6-15  
TOSHIBA AT330  
Developer options  
Developer options are useful for developing applications.  
About tablet  
About tablet includes information about your tablet.  
System updates  
Tap to open the screen to check your system for update.  
Status  
Tap to open the Status screen with a long list of information about  
your battery, mobile network connection and other details.  
System information  
Tap to open a screen that displays some basic information of your  
tablet, such as Manufacture, Product name, Product version and  
Serial number, etc.  
Legal information  
Tap to open a screen where you can obtain legal information about  
the softwares included with your tablet.  
Model number  
Display the model number of your tablet.  
Android™ version  
Display the current version of the Android platform installed on your  
tablet.  
Kernel version  
Display the kernel version.  
Build number  
Display the build number.  
User's Manual  
 
6-16  
TOSHIBA AT330  
Chapter 7  
Optional Accessories  
Optional devices can expand the tablet's capabilities and its versatility. This  
section describes the connection or installation of the following devices:  
Cards  
Memory media  
Secure Digital™ (SD) Card (SD/SDHC/SDXC card)  
Peripheral devices  
USB device  
HDMI device  
Memory media slot  
The tablet is equipped with a Memory media slot that can accommodate  
some kinds of memory media with various memory capacities so that you  
can easily transfer data from devices, such as digital cameras and  
Personal Digital Assistants.  
This Memory media slot supports the following memory media  
Secure Digital (SD) Card (SD/SDHC/SDXC Card).  
Please note that not all memory media have been tested and verified  
to work correctly. Therefore, it is not possible to guarantee that all  
memory media will operate properly.  
Memory media  
This section provides the important safety precautions in order to handle  
your memory media.  
Points to note about SD/SDHC/SDXC memory cards  
SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music  
Initiative), which is a technology adopted to prevent unlawful copy or  
playback of digital music. For this reason, you cannot copy or playback  
protected material on another device or other device, and you may not  
reproduce any copyrighted material except for your personal enjoyment.  
The supported maximum capacity of memory card is 64GB.  
User's Manual  
 
7-1  
   
TOSHIBA AT330  
Memory media format  
New media cards are formatted according to specific standards. If you wish  
to reformat a media card, be sure to do so with a device that uses media  
cards.  
Formatting SD/SDHC/SDXC memory cards  
SD/SDHC/SDXC memory cards are sold already formatted in conformity to  
specific standards. If you reformat an SD/SDHC/SDXC memory card, be  
sure to reformat it with a device such as digital camera or digital audio  
player that uses SD/SDHC/SDXC memory cards, not with the format  
command provided within Windows.  
Should you need to format all areas of the memory card, including the  
protected area, you will need to obtain an appropriate application that  
applies the copy protection system.  
Media care  
Observe the following precautions when handling the card.  
Do not twist or bend cards.  
Do not expose cards to liquids or store in humid areas or lay media  
close to containers of liquid.  
Do not touch the metal part of a card or expose it to liquids or let it get  
dirty.  
After using card, return it to its case.  
The card is designed so that it can be inserted only one way. Do not  
try to force the card into the slot.  
Do not leave a card partially inserted in the slot. Press the card until  
you hear it click into place.  
Memory cards have a limited lifespan, so it is important to backup  
important data.  
Do not write to a card if the battery power is low. Low power could  
affect writing accuracy.  
Do not remove a card while read/write is in progress.  
For more details on using memory cards, see manuals accompanying the  
cards.  
Inserting a memory media  
The following instructions apply to all types of supported media devices. To  
insert a memory media, follow the steps as detailed below:  
1. Turn the memory media so that the contacts (metal areas) are facing  
down.  
2. Insert the memory media into the memory media slot on the tablet.  
User's Manual  
 
7-2  
TOSHIBA AT330  
3. Push the memory media gently to ensure a firm connection is made.  
Figure 7-1 Inserting a memory media  
1
2
1. Memory media slot  
2. Memory media  
Make sure memory media is oriented properly before you insert it. If  
you insert the media in wrong direction, you may not be able to  
remove it.  
When inserting memory media, do not touch the metal contacts. You  
could expose the storage area to static electricity, which can destroy  
data.  
Do not turn the tablet off or switch to Sleep Mode while files are being  
copied - doing so may cause data loss  
Removing a memory media  
The following instructions apply to all types of supported media devices. To  
remove a memory media, follow the steps as detailed below:  
1. Make sure all file operations are finished.  
2. Tap Apps -> Settings -> Storage -> Unmount SD card.  
3. Push the memory media until you hear a click to partially release it.  
4. Grasp it and pull it out of the slot.  
Do not remove the memory media while the tablet is in Sleep mode. The  
tablet could become unstable or data in the memory media could be lost.  
USB device  
This tablet is equipped with a Micro USB port supporting USB host  
function. This allows you to connect the following USB devices to the  
tablet: USB flash drives, USB HDDs (only FAT file system), USB Hubs  
powered by an AC adapter, game controllers, HIDs (Keyboards and  
Mouses) and other USB accessories for Android-powered devices. This  
port complies with USB 2.0 standard.  
To connect a USB device, you must purchase a Micro A plug - A  
receptacle cable. This item is available from your reseller or TOSHIBA  
dealer.  
User's Manual  
 
7-3  
 
TOSHIBA AT330  
Make sure the connector is properly aligned with the socket. Do not try to  
force the connection, doing so can damage the connecting pins.  
This tablet does not support a printer.  
As the port operation of all USB devices has not been confirmed,  
some USB devices may not function properly.  
HDMI device  
The tablet is equipped with a Micro HDMI port that can send video by  
connecting with external devices. 1080p signal formats are supported, but  
actually available signal format depends on each HDMI device. Your tablet  
supports two output modes: Mirror & Video area only.  
Mirror  
The external display device copies the image on the tablet screen.  
Video area only  
The external display device shows the playback when you open a  
multimedia.  
Please refer to Display section in "Settings" chapter for details.  
To connect external devices, follow the steps as detailed below:  
As the port operation of all HDMI (High-Definition Multimedia Interface)  
display devices have not been confirmed, some HDMI display devices may  
not function properly.  
1. Plug Type D connector of the HDMI cable into the Micro HDMI port on  
your tablet.  
2. Plug the other end of the HDMI cable into the HDMI port of the HDMI  
device.  
Figure 7-2 Connecting an HDMI cable  
1
2
1. Micro HDMI port  
2. Micro HDMI (Type D) connector  
Please do not plug/unplug an HDMI device when the tablet is in Sleep  
Mode.  
User's Manual  
 
7-4  
 
TOSHIBA AT330  
When you connect a television or external monitor to the HDMI port,  
the display output device is set to HDMI.  
When you unplug the HDMI cable and re-plug it, please wait at least 5  
seconds before you re-plug the HDMI cable.  
Toshiba Tablet Stand  
Your tablet is supplied with a Stand, which can provide two viewing angles  
for the user.  
Figure 7-3 Tablet stand  
1
2
1
1. Straight angle  
2. Flat angle  
You can place the tablet in either of the angles as the following:  
Figure 7-4 Place your tablet to the stand  
Optional TOSHIBA Accessories  
You can add a number of options and accessories in order to make your  
tablet even more powerful and convenient to use. For reference, the  
following list details some of the items that are available from your reseller  
or TOSHIBA dealer:  
AC Adaptor  
If you frequently use your tablet at more than one  
site, it may be convenient to purchase an  
additional AC adaptor to be kept at each site.  
User's Manual  
 
7-5  
   
TOSHIBA AT330  
Chapter 8  
Troubleshooting  
TOSHIBA have designed this tablet for durability, however, should  
problems occur you are able to use the procedures detailed in this chapter  
to help determine the cause.  
All users should become familiar with this chapter as knowing what might  
go wrong can help prevent problems from occurring in the first place.  
Problem solving process  
Resolving problems will be much easier if you observe the following  
guidelines:  
Stop immediately when you recognize a problem exists as taking  
further action may result in data loss or damage, or you may destroy  
valuable problem related information that can help solve the problem.  
Observe what is happening - write down what the system is doing and  
what actions you performed immediately before the problem occurred.  
Make a screenshot of the current display.  
Please also be aware that the questions and procedures described in this  
chapter are meant only as a guide, they are not definitive problem solving  
techniques. In reality many problems can be solved simply, but a few may  
require help from TOSHIBA Support - if you find you need to consult  
others, be prepared to describe the problem in as much detail as possible.  
Preliminary checklist  
You should always consider the simplest solution first - the items detailed  
in this checklist shall provides easy fixes for issues which appear to be  
serious problems.  
Make sure you turn on all peripheral devices before you turn on the  
tablet.  
Before you attach an external device you should first turn the tablet  
off, then when you turn the tablet back on again it will recognize the  
new device.  
Make sure all optional accessories are configured properly in the  
tablet's setup program and that all required driver software has been  
loaded (please refer to the documentation included with the optional  
accessories for further information on its installation and  
configuration).  
Check all cables to ensure they are correctly and firmly attached to the  
tablet - loose cables can cause signal errors.  
User's Manual  
 
8-1  
   
TOSHIBA AT330  
Inspect all connecting cables for loose wires and all connectors for  
loose pins.  
Always try to make detailed notes of your observations and keep them in a  
permanent error log - this will help you to describe your problems to  
TOSHIBA Support. In addition, if a problem recurs, the log you have made  
will help to identify the problem faster.  
Hardware and system checklist  
This section discusses problems caused by your tablet’s hardware or  
attached peripherals. Basic problems may occur in the following areas:  
Internal display panel  
Memory Media Card  
Wireless LAN  
External monitor  
USB device  
Bluetooth  
Sound system  
Internal display panel  
Apparent tablet's display panel problems may be related to the tablet's  
setup and configuration.  
Problem  
Procedure  
Problems above  
remain unresolved  
or other problems  
occur  
You should initially refer to the documentation  
supplied to you with the software to understand the  
cause of the problems.  
If you are still unable to resolve the problem,  
contact your reseller, dealer or service provider.  
Memory Card  
Problem  
Procedure  
Memory media card Remove the memory media card from the tablet  
error occurs  
and then reinsert it in order to ensure it is firmly  
connected.  
If the problem persists, then you should refer to the  
documentation supplied with your memory media  
card for further information.  
You cannot write to Remove the memory media card from the tablet  
a memory media  
card  
and ensure it is not write protected.  
User's Manual  
 
8-2  
 
TOSHIBA AT330  
Problem  
Procedure  
You cannot read a  
file  
Check to ensure the required file is actually on the  
memory media card that is inserted into the tablet.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
USB device  
In addition to the information in this section, please also refer to the  
documentation supplied with your USB device.  
Problem  
Procedure  
USB device does not Remove the USB device from the convert cable  
work  
and reconnect it to ensure it is firmly attached.  
Sound system  
In addition to the information in this section, please also refer to the  
documentation supplied with your audio device.  
Problem  
Procedure  
No sound is heard  
Adjust the volume.  
Check the software volume settings.  
Please check to see if system sound is muted.  
Check to make sure the headphone connection is  
secure.  
External monitor  
Please also refer to the documentation supplied with your monitor for  
further information.  
Problem  
Procedure  
Monitor does not  
turn on  
After confirming that the monitor's power switch is  
on, you should check the connections to make  
sure that the power cord/adaptor is firmly  
connected to the monitor and to a working power  
outlet.  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
User's Manual  
 
8-3  
TOSHIBA AT330  
Problem  
Procedure  
Display error occurs Check that the cable connecting the external  
monitor to the tablet is firmly attached.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
Wireless LAN  
If the following procedures do not restore LAN access, consult your LAN  
administrator.  
Problem  
Procedure  
Cannot access  
Wireless LAN  
Make sure the tablet's Wireless communication  
function is on.  
If problems persist, contact your LAN  
administrator.  
Bluetooth  
Problem  
Procedure  
Cannot access  
Bluetooth device  
Check to ensure the tablet's Bluetooth functionality  
is set to on in All Apps -> Settings -> Wireless &  
networks -> Bluetooth.  
TOSHIBA Support  
If you require any additional help using your tablet or if you are having  
problems operating the tablet, you may need to contact TOSHIBA for  
additional technical assistance.  
Before you call  
Some problems you experience may be related to software or the  
operating system so it is important that you investigate other sources of  
assistance first. Before contacting TOSHIBA, try the following:  
Review troubleshooting sections in the documentation supplied with  
your software and/or peripheral devices.  
If a problem occurs when you are running software applications,  
consult the software documentation for troubleshooting suggestions  
and consider calling the software company's technical support  
department for assistance.  
Consult the reseller or dealer from where you purchased your tablet  
and/or software - they are your best resource for current information  
and support.  
User's Manual  
 
8-4  
 
TOSHIBA AT330  
TOSHIBA technical support  
If you are still unable to solve the problem and suspect that it is hardware  
worldwide/.  
User's Manual  
 
8-5  
TOSHIBA AT330  
Chapter 9  
Specifications  
This chapter summarizes the tablet’s technical specifications.  
Physical Dimensions  
Size  
343.8 (w) x 211.3 (d) x 9.8 (h) millimeters  
(not including parts that extend beyond the main body).  
Environmental Requirements  
Conditions  
Ambient temperature  
Relative humidity  
Operating  
5°C (41°F) to 35°C  
(95°F)  
20% to 90%  
(noncondensing)  
Non-operating  
-20°C (-4°F) to 60°C  
(140°F)  
10% to 95%  
(noncondensing)  
Wet-bulb temperature 29°C maximum  
Conditions  
Operating  
Altitude (from sea  
level)  
0 to 6,561 feet (2,000  
meters)  
Non-operating  
0 to 40,000 feet (12,192  
meters)  
Power Requirements  
AC adaptor  
100-240V AC  
50 or 60 Hz (cycles per second)  
19V DC  
Tablet  
User's Manual  
 
9-1  
     
TOSHIBA AT330  
Chapter 10  
Information for Wireless Devices  
Wireless LAN Interoperability  
The Wireless LAN is compatible with other LAN systems Direct Sequence  
Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing  
(OFDM) radio technology, and is compliant to:  
The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or b/g/  
n), as defined and approved by the Institute of Electrical and  
Electronics Engineers.  
The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi  
Alliance®.  
The Wi-Fi CERTIFIED™ logo is a certification mark of the Wi-Fi Alliance®.  
Bluetooth wireless technology Interoperability  
Bluetooth™ Cards are designed to be interoperable with the product with  
Bluetooth wireless technology that is based on Frequency Hopping Spread  
Spectrum (FHSS) radio technology, and is compliant to:  
Bluetooth Specification (depending on the model you purchased), as  
defined and approved by the Bluetooth Special Interest Group.  
Logo certification with Bluetooth wireless technology as defined by the  
Bluetooth Special interest Group.  
Please note that it is not possible to confirm the operation of all functions of  
all Bluetooth devices that are available. In view of this it may be noted that  
some functions associated with a specific device might not operate  
properly.  
CAUTION about Wireless Devices  
The wireless devices have not completed verification of connection and  
operation with all devices which are using the Wireless LAN or Bluetooth  
radio technology.  
Bluetooth and Wireless LAN devices operate within the same radio  
frequency range and may interfere with one another. If you use Bluetooth  
and Wireless LAN devices simultaneously, you may occasionally  
experience a less than optimal network performance or even lose your  
network connection.  
User's Manual  
 
10-1  
       
TOSHIBA AT330  
If you should experience any such problem, immediately turn off either one  
of your Bluetooth or Wireless LAN.  
questions about using Wireless LAN or Bluetooth Card from TOSHIBA.  
Your Bluetooth product is not compatible with devices using Bluetooth  
Version 1.0B specifications  
Wireless Devices and your health  
Wireless products, like other radio devices, emit radio frequency  
electromagnetic energy. The level of energy emitted by wireless products  
however is far much less than the electromagnetic energy emitted by  
wireless devices like for example mobile phones.  
Because wireless products operate within the guidelines found in radio  
frequency safety standards and recommendations, TOSHIBA believes  
Wireless products is safe for use by consumers. These standards and  
recommendations reflect the consensus of the scientific community and  
result from deliberations of panels and committees of scientists who  
continually review and interpret the extensive research literature.  
In some situations or environments, the use of wireless products may be  
restricted by the proprietor of the building or responsible representatives of  
the organization. These situations may for example include:  
Using the wireless products on board of airplanes, or  
In any other environment where the risk of interference to other  
devices or services is perceived or identified as harmful.  
If you are uncertain of the policy that applies on the use of wireless devices  
in a specific organization or environment (e.g. airports), you are  
encouraged to ask for authorization to use the wireless device prior to  
turning on the equipment.  
Radio Regulatory Information  
The wireless device must be installed and used in strict accordance with  
the manufacturer’s instructions as described in the user documentation that  
comes with the product. This product complies with the following radio  
frequency and safety standards.  
User's Manual  
 
10-2  
   
TOSHIBA AT330  
Europe  
Restrictions for Use of 2400.0-2483.5MHz Frequencies in  
Europe  
France:  
Outdoor use  
Military Radiolocation use.  
limited to 10mW Refarming of the 2.4GHz band has  
e.i.r.p. within the been ongoing in recent years to  
band  
allow current relaxed regulation Full  
2454-2483.5MHz implementation planned in 2012.  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises. For public use, a general  
authorization is required.  
Luxembourg:  
Norway:  
Implemented  
Implemented  
General authorization required for  
network and service supply.  
This subsection does not apply for  
the geographical area within a  
radius of 20 km from the centre of  
Ny-Alesund.  
Russian  
-
Only for indoor applications.  
Federation:  
Restrictions for Use of 5150-5350MHz Frequencies in Europe  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
General authorization required for  
network and service supply.  
User's Manual  
 
10-3  
TOSHIBA AT330  
Russian  
Limited  
e.i.r.p 100mW. Permitted to use  
Federation:  
only for indoor applications, closed  
industrial and warehouse areas,  
and on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew  
service communications on  
board aircraft in area of the  
airport and at all stages of  
flight.  
2. Permitted to use for public  
wireless access local networks  
on board aircraft during a flight  
at the altitude not less than  
3000m.  
Restrictions for Use of 5470-5725MHz Frequencies in Europe  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
Limited  
General authorization required for  
network and service supply  
Russian  
Federation:  
e.i.r.p 100mW. Permitted to use  
only for indoor applications, closed  
industrial and warehouse areas,  
and on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew  
service communications on  
board aircraft in area of the  
airport and at all stages of  
flight.  
2. Permitted to use for public  
wireless access local networks  
on board aircraft during a flight  
at the altitude not less than  
3000m.  
To remain in conformance with European spectrum usage laws for  
Wireless LAN operation, the above 2.4GHz and 5GHz channel limitations  
apply for outdoor usage. The user should use the wireless LAN utility to  
check the current channel of operation. If operation is occurring outside of  
the allowable frequencies for outdoor use, as listed above, the user must  
User's Manual  
 
10-4  
TOSHIBA AT330  
contact the applicable national spectrum regulator to request a license for  
outdoor operation.  
Canada - Industry Canada (IC)  
This device complies with RSS 210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not  
cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of this device.  
The term “IC” before the equipment certification number only signifies that  
the Industry Canada technical specifications were met.  
USA-Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
Refer to the FCC information section for the detailed information.  
Caution: Exposure to Radio Frequency Radiation  
The radiated output power of the wireless device is far below the FCC radio  
frequency exposure limits. Nevertheless, the wireless device shall be used  
in such a manner that the potential for human contact during normal  
operation is minimized.  
In the usual operating configuration, the distance between the antenna and  
the user should not be less than 20cm. Please refer to the tablet user’s  
manual for the details regarding antenna location.  
The installer of this radio equipment must ensure that the antenna is  
located or pointed in such a way that it does not emit RF field in excess of  
Health Canada limits for the general population; consult Safety Code 6,  
Caution: Radio Frequency Interference Requirements  
This device is restricted to indoor use due to its operation in the 5.15 to  
5.25GHz frequency range.  
Taiwan  
Article 12  
Without permission granted by the NCC, any  
company, enterprise, or user is not allowed to  
change frequency, enhance transmitting power or  
alter original characteristic as well as performance  
to an approved low power radio frequency devices.  
User's Manual  
 
10-5  
TOSHIBA AT330  
Article 14  
The low power radio-frequency devices shall not  
influence aircraft security and interfere legal  
communications;  
If found, the user shall cease operating  
immediately until no interference is achieved.  
The said legal communications means radio  
communications is operated in compliance with the  
Telecommunications Act.  
The low power radio-frequency devices must be  
susceptible with the interference from legal  
communications or ISM radio wave radiated  
devices.  
Using this equipment in Japan  
In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second  
generation low-power data communication systems such as this equipment  
overlaps that of mobile object identification systems (premises radio station  
and specified low-power radio station).  
1. Important notice  
The frequency bandwidth of this equipment may operate within the same  
range as industrial devices, scientific devices, medical devices, microwave  
ovens, licensed radio stations and non-licensed specified low-power radio  
stations for mobile object identification systems (RFID) used in factory  
production lines (Other Radio Stations).  
1. Before using this equipment, ensure that it does not interfere with any  
of the equipment listed above.  
2. If this equipment causes RF interference to other radio stations,  
promptly change the frequency being used, change the location of  
use, or turn off the source of emissions.  
3. Contact an authorized TOSHIBA service provider if you have  
problems with interference caused by this product to Other Radio  
Stations.  
2. Indication for Wireless LAN  
The indication shown below appears on this equipment.  
1. 2.4 : This equipment uses a frequency of 2.4GHz.  
2. DS : This equipment uses DS-SS modulation.  
3. OF : This equipment uses OFDM modulation.  
4. 4 : The interference range of this equipment is less than 40m.  
User's Manual  
 
10-6  
TOSHIBA AT330  
5.  
: This equipment uses a frequency bandwidth from 2,400MHz  
to 2,483.5MHz. It is possible to avoid the band of mobile object  
identification systems.  
3. Indication for Bluetooth  
The indication shown below appears on this equipment.  
1. 2.4 : This equipment uses a frequency of 2.4 GHz.  
2. FH : This equipment uses FH-SS modulation.  
3. 1 : The interference range of this equipment is less than 10 m.  
4.  
: This equipment uses a frequency bandwidth from 2,400  
MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile  
object identification systems.  
4. About the JEITA  
5GHz Wireless LAN supports W52/W53/W56 Channel.  
Device Authorization  
This device obtains the Technical Regulation Conformity Certification and it  
belongs to the device class of radio equipment of low-power data  
communication system radio station stipulated in the Telecommunications  
Business Law of Japan.  
REGZA Tablet AT830  
DSP Research, Inc.  
Approval Number: D120136003  
The following restrictions apply:  
Do not disassemble or modify the device.  
Do not install the embedded wireless module into other device.  
User's Manual  
 
10-7  
 

Telect Network Card BCS II User Manual
Thermador Range PRDS304 User Manual
Tokina Camera Accessories TM16Z7518 User Manual
Toshiba CRT Television 19A26 User Manual
Toshiba Power Supply 1600EP Series User Manual
Triarch Indoor Furnishings 60156 User Manual
Trimble Outdoors Home Theater System HV301 User Manual
Ultra electronic Boiler 80 User Manual
Uniden Cordless Telephone EXAI398 User Manual
V7 TV Mount V7MBK2LPCB User Manual