No. 20700/20705
5. Using the stylus fill in the grid by first touching the number at the bottom of the screen to
be selected and then touching the box within the grid to place it. The blinking triangular
tab points out the last entry made in the grid. Please note that in the BEGINNER mode
any number that has been placed in an incorrect box will continue to flash to let you know
that it is in the wrong place.
SCREEN
TM
+
8
6. To CLEAR an entry, touch the C at the top of the screen and then touch the box on the
grid to be cleared. A new number can now be entered in that box using the same steps as
above.You can also directly place a new number in a filled box without clearing the
previous number by touching a new number and then touching the box.
OPERATING INSTRUCTIONS
7. Once each of the numbers 1 through 9 has been placed correctly, the number will
BATTERY INSTALLATION (battery included)
• Unscrew the battery cover with a Phillips screwdriver.
• Insert 1 button cell battery (CR2032) with the positive (+)
and negative (-) ends facing in the proper direction as
indicated in the battery compartment. (see Fig. 1)
• Replace the cover.
disappear from the bottom of the screen. If the numbers have all been placed correctly, a sound effect will be
heard. If no sound effect is heard then one or more numbers have been placed incorrectly.
8. The time clock at the top of the screen keeps track of the time it takes to complete the puzzle.
9. Pause the game by touching the PAUSE icon
touch the PAUSE icon again.
located on the upper right of the screen. To continue playing
+
10. After 4 minutes without play, the game will turn off automatically. Touch the screen anywhere and hold for 2-5
seconds with the stylus to resume the game. Please note that when the game resumes it will be in the PAUSE
SAFETY BATTERY USAGE
• Do not use rechargeable batteries in this product.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Do not dispose the batteries in fire, batteries may leak or explode.
• Batteries should be replaced by an adult.
mode. Touch the PAUSE icon
to continue playing.
Fig. 1
11. The screen contrast can be adjusted by first touching the PAUSE icon
at the top of the screen. The
numbers 1 through 9 will appear on the bottom of the screen. 1 is the lightest and 9 is the darkest. Touch the
number to set the desired contrast.
12. Turn the sound on and off by touching the SOUND icon
located on the upper right of the screen.
13. At any time during the game, the answer to the puzzle can be viewed for 5 seconds by touching ANS located
on the upper left of the screen. This feature can only be used 3 times in BEGINNER mode and 3 times in
ADVANCED mode during the course of a puzzle.
14. When the player completes the puzzle, DONE will be displayed onscreen. Touch the screen anywhere with
the stylus to return to the main menu.
• Please keep details for future reference.
CAUTION
• Adults should replace batteries.
• Not suitable for children under 3.
• May contain small parts.
15. RESET the game by activating the pinhole RESET button located on the back of the product.
• Do not dispose of batteries in fire; batteries may explode or leak.
• This product contains glass, which may cause injury if broken.
Sudoku Solver
1. Solve any puzzle from your favorite source with the NEW Sudoku Solver! To begin, slide the switch from the
OFF position and choose either BEGINNER or ADVANCED mode.
CARING FOR YOUR DEVICE
2.You will be able to choose between two options: PLAY (1) or SOLVE (2). Using the stylus, touch the number 2
on the bottom left side of the screen to input and solve a Sudoku puzzle.
• If the display becomes dim or malfunctions, replace the batteries.
• After replacing batteries, switch to BEG or ADV to ensure proper functioning.
(In most cases, game malfunctions are due to weak batteries.)
3.The screen will then change to a blank 9 x 9 grid. Using the stylus, fill in the grid by first touching the number
at the bottom of the screen you wish to select and then touching the box within the grid to place it.
4. Once you fill in all the numbers from the puzzle you want to solve, touch DONE at the top of the screen
with the stylus.
5.The screen will then display“SOLVED”and give you a choice between two options: DONE or ANS.
NOTE: Before touching DONE with the stylus, ensure that the inputted numbers are in the correct
arrangement. If the numbers are placed in the incorrect boxes, the Solver will display“UNSOLVED”on
the screen because it violates the logical constraints of the puzzle.
• In an environment with electrostatic discharge, the product may malfunction and lose memory. In this
case switch OFF and then turn to BEG or ADV.
• If the product malfunctions after switching to BEG or ADV, use the tip of the stylus to activate the
pinhole RESET button located on the back of the product to reset the game or simply switch to OFF
and back to BEG or ADV.
GAME PLAY
• If you touch DONE with the stylus, you can play the puzzle you just entered on your Sudoku unit.Touch
ANS anytime during game play with the stylus to view a five-second flashing hint of the solution.
• If you touch ANS with the stylus, you can view the completed Sudoku puzzle.
Stylus slot
OBJECT:
FILL IN THE GRID SO THAT EVERY ROW, EVERY COLUMN AND
EVERY 3 X 3 BOX CONTAINS THE NUMBERS 1 THROUGH 9.
Please note that this game is based on puzzles which have only one solution. Thus, there may be
times toward the end of a puzzle where two different options for placing numbers are technically
acceptable, but only one version is accepted as being correct by this handheld game.
1. To begin slide the switch from the OFF position and choose either BEGINNER or
ADVANCED mode.
2.You will be able to choose between two options: PLAY (1) or SOLVE (2). Using the
stylus, touch the number 1 on the bottom left side of the screen to play a Sudoku puzzle.
3. Using the stylus, select Level 1, 2, 3 or 4 by touching the numbers 1, 2, 3 or 4 on the
bottom left side of the screen. 1 is easiest and 4 is the most difficult.
4. Once the selection has been made, a puzzle will appear on the screen. The amount of
fixed numbers appearing on the grid is determined by the level selected. Fixed numbers
are marked with a triangular tab. The higher the level the less fixed numbers appear.
Due to the varying reliability of Sudoku puzzle sources, there is a remote possibility that
the Sudoku Solver will be unable to solve the inputted puzzle.
Product specifications and colors may vary.
©2005 Techno Source.
All Rights Reserved.
Questions? Comments?
30 Canton Road, Kowloon,Hong Kong
1
TM
Visit our website at:
MADE IN CHINA
IM-20700B
|