Technicolor Thomson CD Player TM9233 User Manual

Safety Information  
CAUTION!  
EN  
CAUTION – INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
Invisible laser radiation when open. Avoid exposure  
to beam. Class 1 laser product. This system must be  
opened only by qualified technicians to prevent  
accidents caused by the laser beam.  
RAYONNEMENT LASER INVISIBLE  
ATTENTION –  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
LASER  
λ
= 780 nm, P max = 5 mW  
Rating Information: At bottom of the unit  
ADVARSEL!  
this unit comply with the existing requirements  
USYNLIG LASERSTRĀLING, NĀR ENHEDEN ER ĀBEN  
OG SIKKERHEDSAFBRYDERNE ER UDE AF  
FUNKTION ELLER OMGĀET. UNDGĀ EKSPONERING  
FOR STRĀLEN.  
VORSICHT!  
UNSICHTBARE LASERSTRAHLUNG BEI GEÖFFNETER  
ABDECKUNG, FALLS SICHERHEITS-VERRIEGELUNG NICHT  
EINGERASTET IST ODER WENN SIE BEEINTRÄCHTIG  
IST. SETZEN SIE SICH NICHT DEM LASERSTRAHL AUS!  
In accordance with the rating plate  
of the unit, this unit complies with  
current standards concerning  
electrical safety and electromagnetlc  
compatibillity.  
Please respect the environment.  
Before throwing any batteries away,  
consult your distributor who may be  
able to take them back for specific  
recycling.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
LASERAPPARAT AV KLASS 1  
Have a Blast- Just Not in Your  
Eardrums!  
DE  
AREIL  
A
LASER  
CLASSE  
1
LUOKAN 1 LASERLAITE  
LASERPRODUKT AF KLASSE 1  
Make sure you turn down the  
volume on the unit before you put  
on headphones. Increase the volume  
to the desired level only after  
headphone are in place.  
VARNING!  
OSYNLIG LASERSTRĀLNING NÄR DENNA  
DEL ÄR ÖPPNAD OCH SPÄRRARNA ÄR  
URKOPPLADE. TITTA EJ IN I STRĀLEN.  
VARO  
AVATTAESSA JA OHITETTAESSA SUOJALUKITUS  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE  
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
T H E L I G H T N I N G  
FLASH AND ARROW-  
HEAD WITHIN THE  
CAUTION: TO REDUCE THE THE EXCLAMATION  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
TRIANGLE IS  
A
WARNING  
SIGN  
ALERTING YOU OF  
T A T  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
WA R N I N G S I G N  
ALERTING YOU OF  
" D A N G E R O U S  
VOLTAGE" INSIDE  
THE PRODUCT.  
I
M
P
O
R
N
I N S T R U C T I O N S  
A C C O M PA N Y I N G  
T H E P R O D U C T.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
 
General controls  
EN  
LEVEL  
M
I
N
.
V
.
X
O
L
A
U
M
<
TUNING  
>
M
E
LW  
MW  
170  
FM  
3
25  
24  
SELECT  
(OFF)  
TAPE  
BAND  
106  
104  
LW  
MW  
FM  
1400  
RADIO  
CD  
100  
97  
100  
20  
18 80  
93  
STEREO  
16  
60  
kHz  
x10  
88  
MHz  
T
REPEA  
CLOSE  
.
PROG  
STOP  
PLAY  
PAUSE  
PORTABLE CD PLAYER  
RADIO CASSETTE RECORDER  
TRACK  
CD MULTIFUNCTION DISPLAY  
PAUSE STOP/EJ.  
F.FWD  
REW  
PLAY  
REC.  
MIN. VOLUME MAX. — increases or decreases output volume  
SELECT – selects among TAPE (OFF), RADIO and CD mode  
DBBS – turns on/ off digital bass boost system  
REPEAT – repeats one track or entire disc playback  
PROG. – enters program mode for CD playing  
PHONE – connects headphone  
TRACK  
– searches / skips CD track forward or backward  
PLAY PAUSE – starts or pauses CD play  
STOP – stops CD playback  
OPEN  
– opens the CD compartment door  
MIX– plays CD tracks randomly  
CLOSE – push to close the disc compartment door  
STEREO – lights when FM signal is received  
BAND – selects between MW/LW/FM band  
< TUNING > – rotate to search for radio stations  
Cassette Player  
PAUSE STOP/EJ.  
F.FWD  
REW  
PLAY  
REC.  
PAUSE – pauses tape playback or recording  
STOP/ EJ. – stops tape playback, winding or recording, opens cassette door  
F. FWD/ REW – winds tape forward or backward  
PLAY – starts tape playback  
REC – starts tape recording  
 
2
Display  
Program mode  
EN  
PROG.  
Track number (shows during  
disc playback)  
Mix play  
Repeat mode (REPEAT 1 - repeat  
current track, REPEAT ALL - repeat  
entire disc)  
REPEAT 1  
ALL  
Radio  
4. Adjust MIN. VOLUME MAX. to your desired  
Tuning to a station  
SELECT  
listening level.  
TAPE  
RADIO  
CD  
1. Select RADIO from the SELECT  
switch.  
2. Slide BAND to select between MW/LW/FM  
Tip:  
band.  
Extend or reposition the antenna for  
better FM reception. Move the unit  
for better MW/LW receptions  
3. Rotate < TUNING > to select radio station.  
 
3
CD player  
Playing disc  
This unit is compatible with audio CD-R  
discs.  
Random Playback  
EN  
SELECT  
TAPE  
RADIO  
CD  
During playback, press  
randomly.  
to play tracks  
1. Selects CD from the SELECT switch.  
In stop mode, press  
to activate random  
function and press PLAY/PAUSE  
begin random playback.  
to  
2. Press OPEN  
to open disc compartment  
door.  
The  
icon appears on display when random  
3. Insert a disc with label face up.  
playback is activated.  
4. Push CLOSE to close disc compartment door.  
Total number of track on disc can be read  
from display.  
Press  
again for de-selection.  
5. Press PLAY/PAUSE to begin CD playback.  
Programming  
6. Press  
or  
to skip to previous  
1. Press PROG. to enter program mode. The  
program location will flash once on the  
display. Then the track number stored in the  
memory location will keep flashing.  
or next track respectively.  
7. Press and hold  
or  
to  
search quickly current track backward or  
forward respectively.  
If the memory location is empty, 00 will be  
flashing.  
8. Adjust MIN. VOLUME MAX. to your desired  
listening level.  
2. Press  
or  
to select the track  
9. Press PLAY/PAUSE or STOP to pause or stop  
disc playback respectively. To resume  
playback, press PLAY/PAUSE again.  
you want to program.  
3. Press PROG. again to confirm your selection  
and access the next program location.  
4. Repeat steps 2 to 3 to program to a  
maximum of 20 tracks.  
Tip:  
PHONES  
5. Press PLAY/PAUSE  
in program mode to  
You may listen through  
start program playback (PROG. indicator  
headphones by inserting one  
remains lit on the display).  
pair into PHONES jack.  
Press STOP  
to return to normal playback  
mode.  
Repeating  
Press REPEAT once to repeat current track and  
Tip:  
If you are in normal playback mode  
but want to play the saved program.  
Press PROG. and then PLAY.  
REPEAT 1 icon shows on display.  
Press REPEAT twice to repeat entire disc and  
REPEAT ALL icon shows on display.  
Press REPEAT a third time to turn off repeat  
mode.  
Clearing program list  
Your program will be erased once you open the  
disc compartment door or change to another  
source mode (e.g. radio, tape).  
Note:  
When random playback is  
activated, only Repeat All can be  
selected.  
 
4
Tape player  
4. Tune to the station to be recorded.  
Playing a tape  
EN  
SELECT  
5. Press REC and PLAY together to begin  
TAPE  
RADIO  
CD  
1. Select TAPE from the SELECT switch.  
recording.  
2. Press STOP/EJ. to open the tape  
6. Press PAUSE or STOP to pause or stop  
deck door.  
recording respectively.  
3. Insert a tape into the door and push the  
door closed.  
From CD  
4. Press REW or F.FWD. to wind the tape to the  
desired starting position. Press STOP/EJ. to  
stop winding.  
1. Insert a tape into the deck.  
2. Select CD from the SELECT switch.  
3. Insert the disc to be recorded.  
4. Select the track or program to be recorded.  
5. Press PLAY to start playback, PAUSE to  
pause playback (release the button to  
resume playback) and STOP/EJ. to stop  
playback.  
5. Press REC and PLAY together to begin  
recording.  
6. Play the track or program to be recorded.  
Recording to tape  
7. Press PAUSE or STOP to pause or stop  
From radio  
1. Insert a tape into the deck.  
recording respectively.  
2. Select RADIO from the SELECT selector.  
3. Slide BAND to access the desired radio band.  
Tip:  
For better recording quality, use  
normal bias tape (Type I) only.  
5
 
Troubleshooting tips  
Problem  
Solution  
EN  
System doesn’t turn on  
No sound  
• Unplug the unit for a moment, and then plug it back in.  
• Check the outlet by plugging in another device  
• Adjust volume setting.  
• Make sure you’ve selected the correct function  
Poor radio reception  
• Adjust the antenna for better reception  
• Try turning off electrical appliances near the unit, such as hair dryers,  
vacuum cleaners, or fluorescent lights  
CD doesn’t play  
CD sound skips  
• Make sure you’ve put a CD in the tray  
• Make sure the CD’s label is facing up  
• Try another CD  
• Make sure that Pause mode is not activated  
• Make sure CD function is selected  
• Clean the CD (as explained in “Maintenance”)  
• Check CD for warping, scratches, or other damage  
• Check for vibration or shock that may affect the unit; move the set if necessary.  
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a  
guarantee. In order to provide you with the highest quality product, we may make changes or modifications without  
prior notice. The English version serves as the final reference on all product and operational details should any  
discrepancies arise in other languages.  
 
6
Maintenance  
Cleaning the exterior  
Notes on CD-R/ CD-RW Disc  
EN  
Disconnect the system from AC power  
before cleaning the exterior of the unit with  
a soft dust cloth  
CD-R discs that are recorded using personal  
computers or other CD-R recorders may not  
be played on this unit due to the difference  
in recording platforms.  
Clean the exterior with a soft clean cloth or  
slightly moistened chamois leather. DO NOT  
use solvents as it may cause damage to the  
unit.  
Do not affix any type of labels to either side  
(recordable or labeled side) of a CD-R disc as  
this may result in the disc malfunctioning.  
To avoid damages to the CD-R disc, do not  
open the disc compartment door while the  
disc is being read. This may take more then  
30 seconds.  
Handling CDs  
Do not touch the signal surfaces. Hold CDs  
by the edges, or by one edge and the hole.  
Do not load an unrecorded CD-R disc into  
the unit.  
Do not affix labels or adhesive tapes to the  
label surfaces. Do not scratch or damage the  
label.  
CDs rotate at high speeds inside the player.  
Do not use damaged (cracked or warped)  
CDs  
Cassettes  
• To protect your recordings from accidental  
erasure on one or both sides of your  
cassette, snap out the tab at the top of the  
cassette. If you decide later to record on the  
tape, seal the hole with a piece of adhesive  
tape. (Refer to diagram on the right)  
Make sure CDs are stored in their original  
case after use. Keep them away from damp,  
humid or abnormally heated places.  
Cleaning CDs  
A
A
A
A
Dirty CDs can cause poor sound quality.  
Always keep CDs clean by wiping them  
gently with a soft cloth from the inner edge  
toward the outer perimeter.  
6
0
Quit Slacking - A little bit of  
If a CD becomes dirty, wet a soft cloth in  
water, wring it out well, wipe the dirt away  
gently, and then remove any water drops  
with a dry cloth.  
slack in your tapes can cause  
scratches on the tape, or worse  
yet, the tape could break. If you  
notice some slack in the tape,  
use a pencil to tighten it up before you  
insert it.  
A
Do not use record cleaning sprays or  
antistatic agents on CDs. Also, never clean  
CDs with benzene, thinner, or other volatile  
solvents which may cause damage to disc  
surface.  
CD Lens Care  
When your CD lens gets dirty it can also  
cause the system to output poor sound  
quality. To clean the lens you will need to  
purchase a CD lens cleaner which can  
maintain the output sound quality of your  
system. For instructions on cleaning the CD  
lens, refer to the ones accompanying the  
lens cleaner.  
 
7
More information  
Safety Precautions  
Important Battery  
Information  
EN  
Never open the cabinet under any circumstances.  
Any repairs or internal adjustments should be  
made only by a trained technician.  
Remove the batteries to avoid leakage if you do  
not use your system for more than one month.  
Never operate this product with the cabinet  
removed.  
Discard leaky batteries immediately as leaking  
batteries may cause skin burns or other personal  
injuries. Dispose of batteries in the proper  
manner, according to provincial and local  
regulations.  
Do not use your System immediately after  
transporting it from a cold place to a warm  
place, as condensation may cause the system to  
malfunction.  
Any battery may leak electrolyte under the  
following circumstances:  
Keep your unit away from humid areas and  
abnormally hot places.  
- if mixed with a different battery type,  
- if inserted incorrectly,  
Do not touch the player with wet hands. If any  
liquid enters the player cabinet, take the player  
to a trained technician for inspection.  
- if all batteries are not replaced at the same  
time,  
This compact disc player uses a laser to read the  
music on the disc. The laser mechanism  
corresponds to the cartridge and stylus of a  
record player. Although this product  
- if disposed of in fire, or  
- if an attempt is made to charge a battery not  
intended to be recharged  
incorporates a laser pick-up lens, it is completely  
safe when operated according to directions.  
Don’t Infringe  
Discs rotate at high speed inside the player. Do  
not use damaged, warped, or cracked discs.  
This product should only be used for the purposes  
for which it is sold, that is, entertainment, violating  
no copyright law. Any attempts to use this product  
for which it is not intended is unlawful and  
therefore not condoned by Thomson.  
Do not touch the pick-up lens which is located  
inside the disc compartment. To keep dust from  
collecting on the pick-up lens, do not leave the  
compartment door open for an extended period  
of time. If the lens becomes dirty, clean it with a  
soft brush, or use an air blower brush designed  
for camera lenses.  
Technical Specification  
Power supply: 230V~50Hz  
The apparatus shall not be exposed to dripping  
and splashing.  
Dimensions ( H x W x D mm):  
Unit size - TM9233: 174 x 216 x275  
Tape deck: Response curve: 125Hz-8kHz (-5dB)  
CD player: Response curve (+/- 2dB): 60Hz to  
20 kHz  
Headset Safety  
Do not play your headset at high volume.  
Hearing experts warn against extended high-  
volume play.  
Rating Plate: Look for it at the bottom of the set.  
If you experience ringing in your ears, reduce  
volume or discontinue use.  
You should use with extreme caution or  
temporarily discontinue use in potentially  
hazardous situations.  
Even if your headset is an open-air designed to  
let you to hear outside sounds, do not turn up  
the volume so high that you are unable to hear  
what is around you.  
 
8

TDK Network Card EE320x250x20 User Manual
Tektronix Musical Instrument TM 501 User Manual
Topcom Cordless Telephone 4270 User Manual
TP Link Network Router TL MR7HN User Manual
Tripp Lite TV Cables N201 007 BL R User Manual
TROY Group Printer TROY IRD 3005 User Manual
Tut Systems Network Card XL 12000S User Manual
Uniden Cordless Telephone XC610 Series User Manual
United States Stove Furnace HOTBLAST 1950 User Manual
Wayne Water Pump 352001 001 User Manual