Wireless / Wired Security Camera
PPW-250 Easy Setup Guide
Easy Set up Components
Connecting the receiver to record on a VCR
A
B
Back of TV
4
5
4
Camera and Stand
Receiver
2
1
3
Power & BNC
Cable for Wired
Connection
Input
Output
Power only Cable for
Wireless Connection
Extension Cable
Video
Inputs
Component
Inputs
Output
1
Back of VCR
3
Receiver Power
Supply
Camera Power
Supply
BNC to RCA
Adapter
Video Cable
1. Using supplied video cable, connect one end to receiver
2. Connect other end of video cable to INPUT on VCR
3. Using another video cable (not supplied) connect to VCR OUTPUT
4. Connect other end of video cable to INPUT on TV
5. Connect power cable to receiver
Connecting the receiver to your TV
C
5
Back of
Receiver
Back of TV
4
5
1
3
Viewing the camera and recording to VCR
D
2. Using your TV’s remote
control tune your TV to
the correct INPUT*. In our
example above the TV
3. Using your VCR’s remote
control tune your VCR to
the LINE 1 INPUT*
4.You should now see
your cameras on the
TV screen. Follow
your manufacturer’s
instructions to
Power on the receiver,
VCR and TV
1.
Video
Inputs
Component
Inputs
Output
Connect the video
cable to the back
of the receiver
Connect one end of the
cable to your TV Input
should be set to INPUT 1
record to your VCR
*Some VCR’s and TV’s will list this as INPUT, A/V, SOURCE, L1, Channel 0 - Consult your manufacturer’s manual for more information
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, Australia - 1300 13 8324 • Email: [email protected]
SR231-WMX-1R005-060409
|