Help Desk / Support Details
12
English
Swann Technical Support
All Countries E-mail: [email protected]
Telephone Helpdesk
UNITED STATES toll free
877-274-3695
Color Video Doorphone
High Resolution Intercom
Safely see who’s at the door before you answer it
(Sun-Thurs, 2pm-10.30pm PST)
800-627-2799
(Mon-Fri, 9am-1pm PST)
USA Exchange & Repairs
562-777-2551
(Mon-Fri, 9am-5pm PST)
AUSTRALIA toll free
1300 13 8324
(Mon-Fri, 9am-5.30pm Aus EST)
International
+61 3 8412 4610
(Mon-Fri, 9am-5.30pm Aus EST)
zones and the time in Melbourne Australia compared to your local time.
Warranty Information
Swann Communications warrants this product against defects in workmanship and material for a
period of one (1) year from it’s original purchase date. You must present your receipt as proof of
date of purchase for warranty validation. Any unit which proves defective during the stated period
will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The
repair or replacement will be warranted for either ninety days or the remainder of the original one
year warranty period, whichever is longer. The end user is responsible for all freight charges
incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping
costs incurred when shipping from and to any country other than the country of origin. The
warranty does not cover any incidental, accidental or consequential damages arising from the use of
or the inability to use this product. Any costs associated with the fitting or removal of this product
by a tradesman or other person or any other costs associated with its use are the responsibility of
the end user. This warranty applies to the original purchaser of the product only and is not
transferrable to any third party.
Installation Guide
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
10 Specifications
Table of Contents
3
Indoor-monitor
Table of Contents ............................................ 3
Power supply
DC16V
Power consumption About 10W in operation; about 0.5W in standby
Functions .......... .............................................4
Package Contents ...........................................5
Monitor Features ............................................ 6
Camera Features ............................................ 6
Installation .....................................................7
Wiring diagram ............................................... 8
Operation ........................................................9
Specifications .................................................10
Quick User Guide ............................................11
Frequently Asked Questions ............................11
Help Desk / Support Details .............................12
Warranty Information ......................................12
Operation temperature
Conversation System
Calling Tone
5 ~ 122 °F /-15~50°C
Bi-directional conversation through the receiver
¡¡
“Ding Dong” chime
Conversation Time
Automatic cut off after about 2 minutes
Horizontal:15.625KHz Vertical: 50Hz
71/3x51/12x1in/185x130x27mm(LxWxH)
Scanning Frequency
External dimension
Camera
Power supply
DC12V , 0.25A (supplied by the monitor)
About 2.0W in operation
Power consumption
Operation temperature
5 ~ 122 °F /-15~50°C
1/4” CMOS
Picture Sensor
Field of View
Min. Lighting
Lighting
Diagonal: about 53°
0.1 lux @ about 11.8in/30cm
6 Infrared illuminators
47/12x31/3x11/4in/120x88x34mm(LxWxH)
External dimension
4 Functions
Operation
9
Visitor at the door
Hands free Communication
This device provides hands free communication between the color TFT-LCD monitor and the outdoor
intercom unit. With a press of a button, you can communicate with the visitor at the door.
Automatic Display
When the visitors press the doorbell button , the bell will ring and a picture of the
visitor will be automatically displayed . You can safely identify the visitor before talking
or opening the door.
mic
mic
The door phone will ring and
the visitor is displayed on
the LCD monitor.
Press the "talk” button to
communicate with the visitor.
A visitor presses the
"call" button on the
intercom.
Unlock Button
With a button for opening an electronic door latch, you are able to open the door from the
LCD monitor without going directly to the door.
Once you press "talk” button to communicate with the visitor, the LCD monitor will be shut down
automatically in 2 minutes
* Note: This is an optional extra available from Swann. (SW-D-LOCK)
.
When the visitor presses the “call” button, the picture will be displayed on the LCD monitor. If no one
answers, the monitor will automatically go back into standby mode after 60 seconds.
Night Vision
The 6 infrared LEDs on the camera allows you to recognize the visitor during times of low light.
* Night vision distance will vary with the amount of available light.
Other operations
Warning button
If you get malice visitors, you can press warning button. The intercom unit will give an audible alarm
and bring attention to area around the intercom unit.
Adjustable volume/contrast
If you think the monitor volume is not loud enough or the picture shown on the screen is too bright,
you can alter this by adjusting the volume or contrast wheel found underneath the LCD monitor.
8 Wiring Diagram
Package Contents
5
mic
Camera bracket
Intercom unit
Monitor
A
B
C
D
ANDFREE
H
OORPHONE
D
IRE
W
IDEO
TWO
O
V
nd
a
R
COL
anual
M
Installation
Operation
R
E
2
W
I
A
T
R
F
I
T
-
Y
L
N
O
C
N
P
O
L
C
D
E
T
O
R
O
L
H
A
NDFRE
Intercom
Unit
Monitor
Installation guide
Screws
Support for Wall-mount
Non-Polarity cable
Important Informations
Do not put the doorphone near strong
magnetic fields, such as a television
or video recorder .
Turn off the power if not use for long time.
Lock
Please disconnect the power supply from the monitor before connecting the monitor to the
intercom unit.
Do not spray water directly on the video
doorphone.
Do not damage the video doorphone.
Open the door with the touch of a button by installing
Swann’s Electric Door Strike* (SW-D-LOCK).
Do not place unit in direct sunlight or expose it There may be high voltage inside the system,
to rain.
do not under any circumstances disassemble
this device.
*Sold separately
6 Monitor Features
Installation of the monitor
7
AC:110~240V
Loud Speaker
Screen
Talk / Monitor
Button
Warning Button
Doorlatch Unlock Button
Microphone
mic
DC 16V
A good height to place the monitor
A/V OUT
mic
is 4.7-5.2 ft / 145~160cm from ground.
Fix the wall mount on the wall using the supplied
screws and then attach the monitor.
Volume
wheel
Contrast
wheel
VCR, TV or MONITOR
Installation of the camera
audio
(white and red)
Positioning the lens using the switch on the back
of the camera to adjust the angle of the lens:
Audio/Video wire
Standard height
VIDEO AUDIO
video(yellow)
Move it up
OUT
of the camera
VIDEO AUDIO
66¡
43¡
To view the image on your TV, connect the Audio/Video wire from the AV OUT on the
LCD monitor to an AV INPUT on your TV.
AV INPUT
Camera Features
Switch for adjusting camera angle
(move up to tilt camera down and
move down to tilt camera up)
50cm
50cm
Horizontal angle
of the camera
Microphone
Move it down
23¡
Camera Lens
Infrared LEDs
Location:
Keep the camera away from direct sunlight
53¡
Light
and the effects of poor weather.
Call button
A
B
C
D
Loud Speaker
50cm
|