plug&playsecurity
Advanced security made easy™
Home Outdoor Security Kit
1 Real & 1 Imitation Camera
PNP-150/2D™
Quick Start Guide
SW212-HXD
SR212-HXD-10006-040609
Table of Contents
Before You Begin
2
Table of Contents
3
Package Contents
3
Connection Guide
4-5
6
Viewing the Camera on Your TV or VCR
Tips & Suggestions
6
Troubleshooting Guide
Helpdesk / Technical Support Details
Warranty Information
7
8
8
Package Contents
PNP-150 Security Camera
PNP-150 Imitation Camera
Camera Stand x 2
Power Adapter
Quick Start Guide
Security Stickers
BNC Extension Cable
BNC to RCA Adapter
Mounting Hardware
plug&playsecurity
Advanced security made easy™
Home Outdoor Security Kit
1
Real
&
1
Imitation Camera
PNP-150/2D™
Quick Start Guide
SW212-HXD
SR212-HXD-10006
EN140109
3
Connection Guide
Connect the camera
cable to the Extension
1Cable
2A. Connecting Directly to TV
Connect the BNC to RCA
Adapter and connect to Video
2Input on your TV or VCR
INPUT
4
Plug in the Camera
Power Adapter
4
Connect the Extension
Cable to the Power
3Adapter
2B. Connecting to Your Existing DVR
Connect the BNC Extension
Cable to an open channel on
2the back of the DVR
5
Viewing the Camera on Your TV or VCR
Viewing the PNP-150 on a TV
After connecting the PNP-150 Camera directly to your TV and powering it on as
described on page 4, tune the TV to the correct input channel.
On your TV’s remote control, the input button is usually labelled as Input, Source,
A/V, Channel 0, AUX etc.*
Viewing and Recording the PNP-150 on a VCR
Connect the PNP-150 into an available input channel on your VCR in the same
manner as the TV connection listed on page 4. Turn on your VCR and TV as if
you were about to play a VCR tape.
On your VCR’s remote control, find the input button with is usually labelled as L1,
L2, Input, Source, A/V, Channel, 0, AUX etc.* Insert a tape and push record to
record the camera.
*Consult the TV or VCR instruction manual for details about changing input
channels
Tips & Suggestions
Never aim the camera directly at the sun as it may damage the sensor
Test all connections and ensure the camera is working correctly prior to permanent
installation
Install cameras high enough or out of reach to avoid tampering
Place Security Stickers in a visible location to alert potential thieves they are being
monitored
Mix real cameras with dummy cameras to give the impression of increased security
coverage
Purchase a Swann DVR to record multiple cameras simultaneously and easily moni-
tor your property.
Place cameras in high traffic areas such as doorways to maximise security
Use only the included Power Supply and do not modify or cut wires
6
Troubleshooting Guide
Problem: I can’t see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem: When I view my camera at night I only see a bright spot and no image.
Solution: Night Vision will reflect when shining through a window. Move the
camera to the other side of the window or another location.
Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.
Technical Specifications
Video
Image Sensor
1/3” Color Super CMOS
Video Quality
400 TV Lines
Number of Effective Pixels
Minimum Illumination
Day/Night Mode
White Balance
NTSC: 510 x 492 / PAL: 628 x 582
0 Lux (IR on)
Color during day / switches to B&W night
Automatic
Signal / Noise Ratio
Electronic Shutter
Gain Contr=ol
Backlight Compensation
Lens
> 50dB
1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL
Automatic
Yes
6mm
Viewing Angle
53 degrees
Night Vision
Number of Infra-Red LEDs
Infra-Red Wavelength
Night Vision Distance
Infra-Red LED Life
30
850nm
Up to 30ft / 9m
10,000 hours
General
Operating Power
DC 12V
Operating Temperature
Body Construction
Dimensions - Camera
Dimensions – Stand
Weight – Camera & Stand
-10°C ~ 50°C / 14°F ~ 122°F
ABS Plastic
5.5” x 2.8” x 2.8” / 140mm x 70mm x 70mm
4.5” x 2.3” x 2.3”/ 120mm x 60mm x 60mm
0.5lbs / 235g
7
Helpdesk / Technical Support Details
Swann Technical Support
All Countries E-mail: [email protected]
Telephone Helpdesk
USA toll free
1-800-627-2799
AUSTRALIA toll free
1300 138 324
(Su, 2pm-10pm US PT)
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
USA Exchange & Repairs
562-777-2551
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
NEW ZEALAND toll free
0800 479 266
(M-F, 9am-5pm US PT)
INTERNATIONAL
+61 3 8412 4610
current time in Melbourne, Australia compared to your local time.
Warranty Information
Swann Communications USA Inc.
12636 Clark Street
Swann Communications PTY. LTD.
Building 4, 650 Church Street,
Richmond, Victoria 3121
Australia
Santa Fe Springs CA 90670
USA
Swann Communications warrants this product against defects in workmanship and material
for a period of one (1) year from it’s original purchase date. You must present your receipt
as proof of date of purchase for warranty validation. Any unit which proves defective during
the stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The end user is responsible for all freight charges incurred to send the
product to Swann’s repair centres. The end user is responsible for all shipping costs incurred
when shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising
from the use of or the inability to use this product. Any costs associated with the fitting or
removal of this product by a tradesman or other person or any other costs associated with
its use are the responsibility of the end user. This warranty applies to the original purchaser
of the product only and is not transferable to any third party. Unauthorized end user or
third party modifications to any component or evidence of misuse or abuse of the device will
render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where
applicable by local laws, regulations and legal rights will take precedence.
© Swann Communications 2009
|