SV231UAF
Instruction Manual
VGA KVM Switch
2-Port VGA, USB KVM Switch
Manual Revision:05/09/2011
Download fromFWor twhewm.oSstoump-tao-ndauteailnsfo.rcmoamtion.,AplellaMse avisnituwawlws.sStareteachrc.chomAnd Download.
Table of Contents
Introduction.............................................................. 1
Packaging Contents.............................................................1
System Requirements.........................................................1
Front View............................................................................2
Rear View ............................................................................2
Installation................................................................ 3
Hardware Installation...........................................................3
Software Installation ............................................................3
How to Use ............................................................... 4
Hotkey Switching.................................................................4
KMDS Software...................................................................4
Software Notes....................................................................5
Troubleshooting....................................................... 5
Specifications........................................................... 7
Technical Support.................................................... 8
Warranty Information............................................... 8
i
Introduction
The StarTech.com SV231UAF allows a single USB keyboard, mouse and
monitor to be switched to access up to two computers. The device offers
a compact design saving desk space, in addition to saving the cost of
purchasing separate peripherals for each computer. The Picture-in-Picture
function allows you to look at the other connected system while still working
on the one in focus, while the data link feature lets you perform a simple
drag and drop data transfer between the two computers. Backed by a
StarTech.com 1-year warranty and free lifetime technical support.
Packaging Contents
•
•
•
1 x KVM switch
2 x PC Connecting Cable (4 ft / 6 ft)
1 x Instruction Manual
System Requirements
•
•
•
•
•
•
VGA enabled computer system
USB enabled computer system with available USB port
VGA enabled display device (e.g. monitor, projector, TV, etc.)
Standard 104-key USB keyboard
Standard 3-button USB mouse
Optional Software: Microsoft® Windows® XP/Vista/7 (32/64-bit)
1
Front View
Rear View
2
Installation
Hardware Installation
1. Connect a VGA display device to the VGA connector (output) on the
front panel of the KVM switch.
2. Connect a USB keyboard and a USB mouse into the dedicated USB
keyboard and mouse ports on the KVM switch. If using audio, also
connect speakers/headphones with 3.5mm mini-jack plugs.
3. Using the included KVM cables, connect the black-colored VGA
connector into the PC1 and PC2 connectors. If using audio, also
connect the 3.5mm mini-jack plug into the respective audio connector.
4. Connect the opposite end of the KVM cable into the appropriate
connectors on the computer systems.
5. Power on the computer connected to PC1 first and wait for it to fully
boot.
6. Switch to PC2 and then power on that computer.
7. Both computers should now be functional and you should be able to
switch between them freely.
Software Installation
1. When connected to a Windows-based PC, this KVM switch will create
additional removable drives that are accessible via “My Computer”. In
the “KMDS” drive, run the setup.exe file.
2. Once the Installation Wizard starts, follow the prompts to complete
installation.
3. An icon should be visible in the System Tray (near system clock) to
access the software options.
3
How to Use
Hotkey Switching
A Hotkey command is a short keyboard sequence for selecting a computer
connected to the KVM switch. A hotkey sequence consists of two
keystrokes (successively within 0.2 seconds). A built-in tone generator
creates a high-pitched beep for a correct hotkey command.
To switch from the currently selected computer to the next computer,
including audio:
[Scroll Lk] + [Scroll Lk]
To switch from the currently selected computer to the next computer, but
not switch the audio:
[Caps Lk] + [Caps Lk]
KMDS Software
The KMDS icon in the System Tray is used to access various additional
features by right-clicking the icon.
Switch KVM
Switch computer control, video and audio to the next computer.
Switch Audio
Switch only audio to the next computer, while control and video remain
on the current computer.
KVM PIP
Activate the Picture-In-Picture window to view a scaled-down video feed
of the next computer system. The primary purpose is for performing a
file transfer to the next computer system by dragging and dropping files
into the PIP window.
4
Software Notes
• File transfers and text copy/paste operations through the KMDS
software, should only be performed if both computer operating systems
are set to the same language version.
• File transfers are only supported to the Windows Desktop. Identical
file names on the desktop will be automatically overwritten without
notification. Caution is recommended when transferring files.
• Picture in Picture mode (PIP) is not suitable for watching multimedia
files.
• Do not change the computer screen resolution while PIP mode is active.
• Do not unplug the KVM cables or attempt port switching while a file
transfer is in progress. Exit the KMDS software before disconnecting the
KVM from a running computer system.
• While using the KMDS software, it is recommended that users have full
Administrator access.
• If any errors are encountered during use of the KMDS software, exit the
software and reconnect the USB and VGA connectors and restart the
KMDS software.
Troubleshooting
Problem: Unable to set proper video resolution for the connected display.
Solutions:
• This KVM switch will store the EDID information from the last
connected display, so if replaced with a non-EDID compliant display,
the connected computers will still receive the EDID from the previous
display. This may prevent you from selecting the proper video
resolution for the new display. An EDID compliant display needs to be
connected to the KVM switch to override the stored EDID information.
• Check the VGA cable connection between the KVM switch and the
VGA display and/or replace cable (with shorter cable, if applicable).
5
Problem: Any of the following symptoms are found:
• Switching is slow or unresponsive
• Mouse or keyboard is slow or unresponsive
• File transfers are slow or unresponsive
• Picture in Picture window only shows grey box
Solutions: The KVM switch needs to be reset.
Method 1:
1. Switch to PC1 and close/exit the KMDS software.
2. Switch to PC2 and close/exit the KMDS software.
3. Disconnect all of the cables from the KVM switch to PC2.
4. Disconnect all of the cables from the KVM switch to PC1.
5. Wait for 20 seconds.
6. Reconnect all of the cables from the KVM switch to PC1, then PC2.
7. Switch to PC1, if not already, and restart the KMDS software.
8. Switch to PC2 and restart the KMDS software.
Method 2:
1. Shut down PC2.
2. Shut down PC1.
3. Disconnect all of the cables from the KVM switch to PC2.
4. Disconnect all of the cables from the KVM switch to PC1.
5. Wait for 20 seconds.
6. Reconnect all of the cables from the KVM switch to PC1, then PC2.
7. Power on PC1 and wait for it to fully boot.
8. Power on PC2 and wait for it to fully boot.
9. Restart the KMDS software on both computers, if not already running.
6
Specifications
Number of Ports
2
1 x DE-15 VGA male
1 x USB type A male
1 x 3.5mm Audio mini-jack male
(via included KVM cable)
Computer Connectors
(per port)
1 x DE-15 VGA female
2 x USB type A female
1 x 3.5mm Audio mini-jack
Console Connectors
(per port)
Maximum Video Resolution
DDC Support
2048 x 1536
Yes (DDC, DDC2, DDC2B)
Audio Support
Yes
On Screen Display
Cascadable
No
No
Push-button, Hotkey, Software
None
Switching Modes
Power Adapter
Enclosure Material
Operating Temperature
Storage Temperature
Humidity
Plastic
0°C ~ 40°C (32°F ~ 104°F)
-10°C ~ 80°C (14°F ~ 176°F)
0 ~ 90% RH
Dimensions (WxHxD)
Weight
110.0mm x 27.0mm x 65.0mm
100 g
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.
com USA LLP (or their officers, directors, employees or agents) for
any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any
pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the
exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement
may not apply to you.
8
StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government,
education and industrial facilities to name just a few. We offer
an unmatched selection of computer parts, cables, A/V products,
KVM and Server Management solutions, serving a worldwide
market through our locations in the United States, Canada, the
United Kingdom and Taiwan.
all our products and to access exclusive interactive tools such as
the Cable Finder, Parts Finder and the KVM Reference Guide.
|