3-251-798-11(1)
IC Recorder
Operating Instructions
Owner’s Record
The model number is located at the rear and the serial
number is located inside the battery compartment.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ICD-ST10 Serial No.
ICD-ST20/ST10
© 2003 Sony Corporation
Notice for users
Program © 1999, 2000, 2001, 2002, 2003 Sony Corporation
Documentation ©2003 Sony Corporation
All rights reserved. This manual or the software described herein, in whole or in part,
may not be reproduced, translated or reduced to any machine readable form without
prior written approval from Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT,
CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH
THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED
HEREIN OR THE USE THEREOF.
Sony Corporation reserves the right to make any modification to this manual or the
information contained herein at any time without notice.
The software described herein may also be governed by the terms of a separate user
license agreement.
• This software is for Windows and cannot be used for Macintosh.
• The supplied connecting cable is for the IC recorder ICD-ST20/ST10 only. You
cannot connect other IC recorders.
Information
I
N NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
Trademarks
• “LPEC” is the trademark of Sony Corporation.
• IBM and PC/AT are registered trademarks of International Business Machines
Corporation.
• Microsoft, Windows and Outlook are trademarks of Microsoft Corporation,
registered in the U.S.A. and other countries.
Copyright ©1995 Microsoft Corporation.
All rights reserved.
Portion Copyright ©1995 Microsoft Corporation
• Apple and Macintosh are trademarks of Apple Computer Inc., registered in the
U.S.A. and other countries.
• Pentium is a registered trademark of Intel Corporation.
• NaturallySpeaking, Dragon Systems are trademarks owned by ScanSoft, Inc. and
are registered in the United States and/or other countries.
• All other trademarks and registered trademarks are trademarks or registered
trademarks of their respective holders. Furthermore, “™” and “®” are not
mentioned in each case in this manual.
The “Digital Voice Editor” uses software modules as shown below:
Microsoft® DirectX® Media Runtime
©2001 Microsoft Corporation. All rights reserved.
GB
3
Table of Contents
Getting Started........................................................................ 6
Step 1: Installing the Batteries ............................................................................. 6
Replacing the Batteries ................................................................................. 7
Step 2: Setting the Clock ...................................................................................... 8
Basic Operations .................................................................... 10
Recording Messages ............................................................................................ 10
Tips for Using the Built-in Microphone ................................................... 13
Using Convenient Functions while Recording ....................................... 14
Recording with an External Microphone or Other Equipment .................... 16
Recording with an External Microphone ................................................. 16
Recording from Other Equipment ............................................................ 16
Recording with Other Equipment ............................................................ 17
Playing Back Messages ....................................................................................... 18
Using the Display Window ................................................................................ 23
Selecting the Display Mode ............................................................................... 26
Turning off the Display ............................................................................... 28
Various Ways of Playback ..................................................... 29
Adjusting the Playback Speed — DPC
(Digital Pitch Control) ................................................................................ 29
Adding a Bookmark ............................................................................................ 31
Playing Back the Specified Section Repeatedly — A-B Repeat .................... 32
Editing Messages ................................................................... 33
Adding a Recording ............................................................................................ 33
Adding a Recording to a Previously Recorded Message ...................... 33
Adding an Overwrite Recording during Playback ................................ 34
Erasing Messages ................................................................................................ 35
Erasing Messages one by one .................................................................... 35
Erasing All Messages in a Folder .............................................................. 37
Dividing a Message into Two/Combining Messages .................................... 38
Dividing a Message ..................................................................................... 38
Combining Messages .................................................................................. 40
Moving Messages to a Different Folder ........................................................... 41
Adding Priority Mark(s)
— Priority Mark Function .......................................................................... 42
Adding Priority Mark(s) in the Stop Mode ............................................. 42
Adding Priority Mark(s) during Playback .............................................. 43
GB
4
Other Functions ..................................................................... 44
Playing Back a Message at a Desired Time with an Alarm ........................... 44
Turning off the OPE Indicator (LED) ................................................................ 48
Preventing Accidental Operation — HOLD Function ................................... 49
Using an Adding Recording .............................................................................. 50
Changing the Settings — MENU ...................................................................... 51
Using the ”Digital Voice Editor“ Software ...................................................... 54
Additional Information ......................................................... 56
Precautions ........................................................................................................... 56
Troubleshooting ................................................................................................... 57
Error Messages of the IC Recorder ........................................................... 60
System Limitations ...................................................................................... 62
Specifications ....................................................................................................... 63
Index to Parts and Controls ............................................................................... 64
Index ...................................................................................................................... 66
GB
5
BGetting Started
Step 1: Installing the Batteries
1
Slide and lift the battery compartment lid.
2
1
2
Insert two LR03 (size AAA) alkaline batteries with correct
polarity, and close the lid.
2
1
If the battery compartment lid is
accidentally detached, attach it
as illustrated.
Clock setting display appears when you insert batteries for the first time,
or when you insert batteries after the unit has been without batteries for a
certain period of time. Please refer to steps 3 to 6 in “Step 2: Setting the
Clock” on pages 8 and 9 to set the date and time.
Using on house current
Connect the AC power adaptor AC-E30HG (not
supplied) to the DC IN 3V jack of the unit and to
the wall outlet. Do not use any other AC power
adaptor.
Polarity of the plug
GB
6
Replacing the Batteries
The battery indicator on the display window shows the battery condition.
Notes
• Do not use manganese batteries for this unit.
• When you replace the batteries, insert the new ones within 3 minutes after you
remove the exhausted ones. Otherwise, the display may show the clock setting
display or incorrect date and time when you re-insert the batteries. In this
case, set the date and time again. The recorded messages and alarm setting,
however, will remain.
• Do not charge dry batteries.
• When you are not going to use the unit for a long time, remove the batteries to
prevent damage from battery leakage and corrosion.
Battery remain indication
:
Replace both of the two batteries with new ones.
m
:
The unit will stop operation.
Battery life (Using Sony alkaline batteries LR03 (SG))
(Recording mode:)
In continuous recording: Approx. 10 hours Approx. 12 hours Approx. 14.5 hours
In continuous playback: Approx. 6.5 hours Approx. 7.5 hours* Approx. 8.5 hours*
ST (Stereo)
SP
LP
* When playing back through the internal speaker with the medium volume
level
* The battery life may shorten depending on the operation of the unit.
Note on the “ACCESS” message
The unit is accessing data while “ACCESS“
appears in the display window or the OPE
indicator flashes in orange. While accessing, do
not remove the batteries or AC adaptor. Doing so
may damage the data.
Note
If the unit is required to process excessive amount of data, “ACCESS” may be
displayed for an extended period of time. This is not a malfunction of the unit.
Wait until the message disappears before starting operation.
GB
7
Step 2: Setting the Clock
You need to set the clock to use the alarm function or record the date and
time.
Clock setting display appears when you insert batteries for the first time,
or when you insert batteries after the unit has been without batteries for a
certain period of time. In this case, proceed from step 4.
Jog lever
Press up (>).
Turn toward MENU.
Press the center
(x•B).
Press down (.).
1
2
Turn the jog lever toward
MENU.
The menu mode will be displayed in
the display window.
Press the jog lever up or down
(>/.) to select “SET DATE”.
3
4
Press the jog lever (x•B).
The date and time setting window is
displayed. The year digits will flash.
Set the date.
1 Press the jog lever up or down
(>/.) to select the digits of
the year.
GB
8
2 Press the jog lever (x•B).
The month digits will flash.
3 Set the month and day in
sequence, then press the jog lever
(x•B).
The hour digits will flash.
v
5
Set the time.
1 Press the jog lever up or down
(>/.) to select the digits of
the hour.
2 Press the jog lever (x•B).
The minute digits will flash.
3 Set the minute.
4 Press the jog lever (x•B).
The menu mode will be
displayed again.
Note
If you do not press the jog lever
(x•B) for more than one minute,
the clock setting mode is cancelled
and the window will return to
normal display.
6
Turn the jog lever toward
MENU.
The window will return to normal
display.
1 If the unit is left unused for more than 3
seconds in the stop mode after the clock
is set, the display will show the current
time (page 26).
GB
9
BBasic Operations
Recording Messages
You can record the maximum of 99 messages in each of the five (A, B, C, D
and E) folders. You can record messages in the following three ways:
•Add a recording behind the last recorded message
•Add a recording to a previously recorded message (page 33)
•
Add an overwrite recording (page 34)
This section explains how to add a recording behind the last recorded
message.
11:30, November 1 12:00, November 1 10:00, November 2
Meet Mr. Brown at
2 p.m. tomorrow.
Don’t forget
to call Mary
Make remittance
at ABC bank
Message 1 Message 2 Message 3 Blank space
9:00, November 4
Send a card to
Miss Smith
Message 1 Message 2 Message 3 Message 4
Recorded after the last
recorded message
Maximum recording time
The maximum recording time of all the folders is as follows. You can
record messages for the maximum recording time in a single folder.
Recording mode:
ST*
SP**
LP***
ST, SP and LP in a mixture
ICD-ST20
ICD-ST10
85 min. 261 min. 696 min. 85 min. to 696 min.
41 min. 125 min. 334 min. 41 min. to 334 min.
(min.: minutes)
* ST: Stereo recording mode
** SP: Standard play recording mode (monaural sound)
***LP: Long play recording mode (monaural sound)
Notes
• To record in better sound quality, select the ST mode. For switching the
recording mode, see page 53.
•
Before making a long recording, be sure to check the battery indicator (page 7).
• The maximum recording time and the number of messages you can make
varies depending on the conditions of use.
• To avoid replacing batteries during long time recording, use the AC power
adaptor (not supplied).
GB
10
Select the folder.
1
2
Turn the jog lever toward FOLDER
repeatedly to display the folder (A, B, C, D or
E) in which you wish to record messages.
Selected folder
Start recording.
1 Press zREC/REC PAUSE button.
You do not need to keep pressing
zREC/REC PAUSE while recording.
Built-in
microphone
2 Speak into the built-in microphone.
Remaining memory
Microphone sensitivity
Recording mode
Current message
number
OPE indicator
(lights in red during
recording**)
Counter display*
* The display selected with the DISP in the menu (page 26) appears.
**When the LED in the menu is set to OFF, the OPE indicator turns off (page 48).
Notes
• While the OPE indicator flashes or turns in orange, do not remove the
batteries or the AC adaptor. Doing so may damage the data.
• Noise may be recorded if an object, such as your finger, etc., accidentally rubs
or scratches the unit during recording.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow1nl1oad.
Press
xSTOP.
Recording Messages (continued)
Stop recording.
3
The unit stops at the beginning of the current
recording.
If you do not change the folder after you stop
recording, the next time you record you will
record in the same folder.
Other operations
To
Do this
pause recording*
Press zREC/REC PAUSE.
During recording pause, the OPE indicator
flashes in red and “PAUSE” flashes in the
display window.
release pause and
resume recording
Press zREC/REC PAUSE again.
Recording resumes from that point.
(To stop recording after pausing
recording, press xSTOP.)
review the current
recording instantly
Press the jog lever (x•B).
Recording stops and playback starts from
the beginning of the message just recorded.
review during recording
Press the jog lever down (.) during
recording or recording pause.
Recording stops and you can search
backwards while listening to fast playback
sound. After you release the jog lever,
playback starts from that point. You can
add an overwrite recording from that point.
* 1 hour after you pause recording, recording pause is automatically released
and the unit goes into the stop mode.
GB
12
Tips for Using the Built-in Microphone
To record a sound centering on a specific direction
• Adjust the position of the built-in microphone.
• To record a sound centering on a specific
direction, slide the DIRECTNL switch to “ON”
position. When you record a sound at a
conference/meeting or in a spacious place etc.,
use this setting.
Note
DIRECTNL
The DIRECTNL switch functions only in the “SP” or
“LP” recording mode. For details of recording
modes, see page 53.
To record a sound not centering on a specific direction (all-
directional recording)
Slide the DIRECTNL switch to “OFF” position.
To select the sensitivity of the built-in microphone
You can select the microphone sensitivity by setting the SENS (page 52) in
the menu according to the recording conditions:
• H (high): To record a small sound at a meeting or in a quiet and/or
spacious place.
• M (middle): To record at a meeting or in a quiet and/or small place.
• L (low): To record for dictation or in a noisy place.
You can change the SENS setting with the menu during recording .
GB
Download from Www.Somanuals.com. All Manuals Search And Dow1nl3oad.
Recording Messages (continued)
Using Convenient Functions while Recording
To monitor the recording
When recording from the built-in microphone, you connect an ear receiver
supplied or not supplied to the i (headphones) jack and monitor the
recording from the connected ear receiver. You can adjust the volume with
VOL +/–, but the recording level is fixed.
Note
If you turn up the volume excessively or place the ear receiver near the
microphone while monitoring recording, the microphone may pick up the
sound from the ear receiver, causing acoustic feedback (howling sound).
Starting recording automatically in response to the sound
— Advanced VOR function
You can set the VOR (voice operated recording) function in the menu.
With VOR set to ON, recording starts when the recorder detects sound,
and “VOR” appears in the display window. The recording pauses when
no sound is detected, and “VOR PAUSE” appears. You can change the
VOR setting with the menu during recording (page 52).
Note
VOR function is affected by the sound around you. Set the SENS (page 52)
according to the recording conditions. If recording is not satisfactory after you
have changed the microphone sensitivity, or for important recording, set the
VOR to OFF.
GB
14
Memory remain indication
During recording, the remaining memory indicator decreases one by one.
When the remaining recording time reaches 5 minutes, the remaining
memory indication flashes.
When the remaining time reaches 1 minute, the remaining time indication
will flash in the display window regardless of the display mode (page 26).
When the memory is full, recording automatically stops and “FULL” will
be displayed with an alarm sound. To continue recording, first erase some
of the messages (page 35).
Note
When you set the BEEP (page 53) to OFF, an alarm sound (beep) does not
sound.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow1nl5oad.
Recording with an External Microphone
or Other Equipment
You can record sound of an external microphone or other equipment (tape
recorder, MiniDisc player, or etc.) with the IC recorder. Depending on the
device you use, connect the IC recorder as follows. For available
accessories, consult with your nearest Sony dealer.
Recording with an External Microphone
Connect an external microphone to
the m (microphone) jack.
When you connect an external
microphone, the built-in
mini-plug (stereo)
microphone is automatically cut off.
When a plug in power type
microphone is connected, power is
automatically supplied to the
microphone from the IC recorder.
Stereo
microphone
1 Recommended types of microphones
You can use the ECM-719 Sony electret condenser microphone (not supplied).
Recording from Other Equipment
To record sound of other equipment with the IC recorder, connect the m
(microphone) jack of the IC recorder to the earphone jack of other
equipment (tape recorder etc.) by using the registered connecting cable.
Note
If you use a connecting cable without register, sound may be recorded
interrupted. Make sure to use a registered connecting cable.
GB
16
Recording with Other Equipment
To record the sound of the IC recorder with other equipment, connect the
i (headphones) jack of the IC recorder to the audio input connector
(minijack, stereo) of other equipment.
mini-plug (stereo)
Tape recorder, etc.
mini-plug (stereo)
GB
Download from Www.Somanuals.com. All Manuals Search And Dow1nl7oad.
Playing Back Messages
When playing back a previously recorded message, start from step 1.
When playing back a message you have just finished recording, start from
step 3.
Select the folder.
1
Turn the jog lever toward FOLDER
repeatedly to display the folder (A, B, C,
D or E) in which you wish to play
messages.
Selected folder
Select the message number.
2
Press the jog lever up or down (>/.) to display
the desired message number.
• Press up (>): for next message number.
• Press down (.): for previous message number.
Selected message number
The number of messages in a folder
Counter display*
* The display selected with the DISP in the menu (page
26) appears.
GB
18
Start playback.
i (headphones) jack
3
1 Press the jog lever (x•B).
Counter display*
2 Adjust the volume with VOL +/– .
* The display selected with the DISP in the menu
(page 26) appears.
**When the LED in the menu is set to OFF, the OPE
indicator turns off (page 48).
OPE indicator
(lights in green during
playback**)
After playing back one message, the unit stops at the beginning of the next
message.
When the last message in a folder has been played back, the unit stops at
the beginning of the last message.
1 To listen from an ear receiver
Connect an ear receiver (not supplied) to the i (headphones) jack. The built-in
speaker will be automatically disconnected.
1 To listen from an external speaker
Connect an active or passive speaker (not supplied) to the i (headphones) jack.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow1nl9oad.
Playing Back Messages (continued)
Other operations
To
Do this
stop at the current position
(Playback Pause function)
Press xSTOP or the jog lever (x•B).
To resume playback from that point,
press the jog lever (x•B) again.
go back to the beginning
of the current message*
Press the jog lever down (.)
once.**
go back to previous
messages
Press the jog lever down (.)
repeatedly. (During stop mode, keep the
jog lever pressed to go back the
messages continuously.)
skip to the next message*
Press the jog lever up (>) once.**
skip to the succeeding messages Press the jog lever up (>) repeatedly.
(During stop mode, keep the jog lever
pressed to skip the messages
continuously.)
*
If you have set a bookmark on the message, the unit stops at the bookmark.
** These operations are for when EASY-S is set to OFF. For operations when
EASY-S is set to ON, see page 53.
Playing back a message rapidly or slowly — DPC (Digital
Pitch Control)
When you adjust the playback speed with the DPC in the menu (page 29),
you can play back a message rapidly or slowing by sliding the DPC switch
to ON. When you set the playback speed faster or slower of the normal
speed, “FAST” or “SLOW” appears. You can change the setting during
playback.
GB
20
Playing back all messages in a folder continuously
— Continuous Play
When the CONT (page 52) is set to ON in the menu, you can play back all
the messages in a folder continuously. You can change the setting during
playback.
Locating quickly the point you wish to start playback (Easy
Search)
When EASY-S is set to ON (page 53) in the menu, you can quickly locate
the point you wish to start playback by pressing the jog lever up or down
(>/.) repeatedly during playback or playback pause.
You can go back approx. 3 seconds by pressing the jog lever down (.)
once, or advance approx. 10 seconds by pressing the jog lever up (>)
once. This function is useful when locating a desired point in a long
recording.
Searching forward/backward during playback (Cue/Review)
• To search forward (Cue): Keep pressing the jog lever up (>) during
playback and release it at the point you wish to resume playback.
• To search backward (Review): Keep pressing the jog lever down
(.) during playback and release it at the point you wish to resume
playback.
The unit searches at slow speed with playback sound. It is useful to check
one word forward or behind. Then, if you keep pressing the jog lever up or
down, the unit starts to search at higher speed. During cue/review, the
counter will be displayed, regardless of the display mode setting (page 26).
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow2nl1oad.
Playing Back Messages (continued)
1 When playback is done to the end of the last message
• When playback or fast playback is done to the end of the last message, “END”
flashes for 5 seconds and the OPE indicator lights up in green. (You cannot
hear the playback sound.)
• When “END” stops flashing and the OPE indicator goes off, the unit will stop
at the beginning of the last message.
• If you keep pressing the jog lever down (.) while “END” is flashing, the
messages are played back rapidly, and normal playback will start at the point
you release the button.
• If the last message is long and you wish to start playback at a later part of the
message, keep pressing the jog lever up (>) to go to the end of the message
and then press the jog lever down (.) while “END” is flashing to go back to
the desired point.
• For messages other than the last one, go to the beginning of the next message
and play backward to the desired point.
Playing back a message repeatedly — Repeat Play
During playback, press the jog lever (x•B) for
more than one second.
“
” will be displayed and the selected message
will be played back repeatedly.
To resume normal playback, press the jog lever
(x•B) again. To stop playback, press xSTOP.
1 To play back the specified section repeatedly — A-B Repeat
You can specify the start (A) and end (B) points and play back the specified
section repeatedly (page 32).
GB
22
Using the Display Window
Parts in the display window
6 Priority marks (42)
7 Counter /Remaining time
indication /Recording date
and time indication /
Current time indication (26)
The display selected with the
DISPLAY in the menu
appears.
8 Repeat play indicator (21, 32)
Appears while a message or
a specific portion (A-B) of
the message is played back
repeatedly.
9 Remaining battery indicator
(7)
1 Remaining memory
indicator (15)
2 Bookmark indicator (31)
Appears when the bookmark
is set for a message.
3 Folder indication
Displays the current folder
(A, B, C, D or E).
4 Alarm indicator (46)
Appears when the alarm is
set for a message.
5 SENS (microphone
sensitivity) indication (52)
Displays the current
microphone sensitivity:
•H (high): To record at a
meeting or in a quiet/
spacious place.
When the AC power adaptor
(not supplied) is connected,
the indicator does not
appear.
q; Recording mode indication
(53)
Displays the current
recording mode:
•ST: Stereo Play mode
•SP: Standard Play mode
(monaural sound)
•LP: Long Play mode
(monaural sound)
qa REC (Recording) indicator
(11)
•M (middle): To record at a
meeting or in a quiet/small
place.
qs Selected message number /
Total message number in the
folder (11, 18)
•L (low): To record for
dictation or in a noisy
place.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow2nl3oad.
Using the Display Window (continued)
Display examples
xDisplay during recording and
playback
In an ordinary recording or playback
mode, the message number, recording
mode and microphone sensitivity of
the message being recorded or played
back, and playback counter are
displayed in the window.
A message is being recorded as
the 21st message of all 21
messages in the folder A in ST
mode with M (middle)
microphone sensitivity.
In a special recording or playback
mode such as overwrite recording, A-
B repeat playback, or DPC play, the
mode flashes in the display.
When the DPC switch is set to ON
to start playback rapidly
xDisplay during setting the menu
In menu setting mode, the menu
items and current setting are
displayed. You can change the
setting while it is flashing.
LP recording mode is
being selected.
MODE menu
In alarm or clock setting, the date and
time setting display appears.
”May 10, 2003“ is being selected.
GB
24
Display examples
xRemain indications
When the battery or memory runs
out, the remain indications flash in
the display.
When the remain time becomes
shorter than 1 minute
xError messages
The error messages or error numbers
will be displayed (page 61).
When an access error occurs
When an error number is
displayed
GB
Download from Www.Somanuals.com. All Manuals Search And Dow2nl5oad.
Selecting the Display Mode
You can select the display mode for stop, recording and playback modes.
1
Turn the jog lever toward MENU.
The menu mode will be displayed.
>
MENU
x•B
.
2
Press the jog lever up or down
(>/.) to select “DISP”.
3
4
Press the jog lever (x•B).
The display setting window will be
displayed.
Press the jog lever up or down
(>/.) to select the display
mode.
The display modes changes in the
order shown to the right.
COUNT n REM
N
N
REC TIME n REC DATE
5
6
Press the jog lever (x•B).
Turn the jog lever toward
MENU.
The menu mode exits and the
normal mode is displayed.
1 On current time display
If the unit is left unused for more than 3
seconds in the stop mode, the display
will turn to the current time display
mode as shown to the right, regardless
of the display mode setting.
GB
26
You can select the display mode from the following:
xCOUNT (elapse time)
Elapsed playback/recording time of
one message.
xREM (remaining time)
In the playback mode: The remaining
time of one message indication.
In the stop and recording mode: The
remaining recording time indication.
xREC DATE (recorded date)
In the playback and playback pause
modes, the date the current message
was recorded.
In the recording mode, the current
date.
(If the clock has not been set, “--Y--M--
D” will be displayed.)
x REC TIME (recorded time)
In the playback and playback pause
modes, the time the current message
was recorded.
In the recording mode, the current
time.
(If the clock has not been set, “--:--”
will be displayed.)
GB
Download from Www.Somanuals.com. All Manuals Search And Dow2nl7oad.
Selecting the Display Mode (continued)
Turning off the Display
The unit is not equipped with the power button.
The display always appears on the window,
which almost will not influence the battery life.
To turn off the display, slide the HOLD switch in
the direction of the arrow in the stop mode.
HOLD
“HOLD” will flash for three seconds and then the
display turns off in the window. To turn on the
display, slide the HOLD switch in the opposite
direction.
GB
28
BVarious Ways of Playback
Adjusting the Playback Speed — DPC
(Digital Pitch Control)
You can adjust the speed of the playback between twice the normal speed
(+100%) and half the normal speed (–50%). The message is played back in
natural tone thanks to the digital processing function.
Jog lever
(>/./x•B/MENU)
DPC
Playing back a message rapidly or slowly
Slide the DPC switch to ON.
“FAST” or “SLOW” flashes for 3 seconds
and the message is played back at the
speed specified with the menu.
To resume normal playback
Slide the DPC switch to OFF.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow2nl9oad.
Adjusting the Playback Speed — DPC (Digital Pitch
Control) (Continued)
Setting the playback speed
You can set the playback speed when the DPC switch is set to ON. The
setting for the playback speed holds effective until you change the setting.
1
2
Turn the jog lever toward MENU
to display the menu mode.
Press the jog lever up or down
(>/.) to select “DPC”, then
press the jog lever (x•B).
The playback speed setting mode
will be displayed. The flashing
number represents the playback
speed in percentage with the
standard speed as “0”.
3
Press the jog lever up or down
(>/.) to set the playback
speed.
• Fast play (up to +100% by 10%):
Press up (>).
• Slow play (down to –50% by 5%):
Press down (.).
4
5
Press the job lever (x•B).
The specified playback speed is
confirmed.
Press the jog lever toward
MENU to exit the menu mode.
The normal display appears.
GB
30
Adding a Bookmark
You can add a bookmark at a point in a message and use it during
playback. You can add only one bookmark in each message.
ERASE
Jog lever (>/./x•B)
DIVIDE/ (bookmark)
During playback or stop, press DIVIDE/
than 1 second.
(bookmark) for more
A bookmark is added and the bookmark
indicator ( ) flashes for 3 seconds.
If you add a bookmark to a message that already
has a bookmark, a previously added bookmark is
deleted and a bookmark is added to the newly
specified point.
To start playback at the bookmark
Press the jog lever up or down (>/.) during stop so that the
bookmark indicator flashes for 3 seconds. Then press the jog lever (x•B).
To delete the bookmark
1
2
3
In stop mode, press the jog lever up or down (>/.) to display
the number of the message with the bookmark you wish to delete.
While pressing DIVIDE/
1 second.
(bookmark), press ERASE for more than
Press ERASE while the bookmark indicator and “ERASE ” are
flashing.
Note
If you want to combine messages to which the bookmark is already added,
delete the bookmark before combining messages.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow3nl1oad.
Playing Back the Specified Section
Repeatedly — A-B Repeat
While playing back a message, you can set the start (A) and end (B) points
for a section you wish to play repeatedly.
x STOP
Jog lever (x•B)
A-B
(repeat)/
PRIORITY
1
2
During playback, press A-B
(repeat)/PRIORITY briefly.
The starting point (A) of the section
you wish to play repeatedly is set.
“A-B B” flashes.
During playback, press A-B
(repeat)/PRIORITY briefly.
The finishing point (B) of the section
is set.
“A-B” and “ ” are displayed and
the specified section is played back
repeatedly.
To resume normal playback
Press the jog lever (x•B).
To stop A-B Repeat playback
Press xSTOP.
Notes
• You cannot set A-B Repeat for a section that overlaps two or more messages.
• If you do not set the finishing point (B), the finishing point is automatically set
at the end (or the beginning) of the message.
GB
32
BEditing Messages
Adding a Recording
Notes
• At a factory setting, you cannot add a recording not to erase the message by
accidental operation. See “Using an Adding Recording” (page 50) to change
the setting.
• The added or overwritten portion of a message will be recorded in the same
recording mode (ST, SP or LP; see page 53) as the original message, regardless
of the current recording mode setting.
• You cannot add or overwrite a recording if the remaining memory is not long
enough. For more information, see “Troubleshooting“ (page 57).
Built-in microphone
zREC/REC PAUSE
xSTOP
OPE indicator
Adding a Recording to a Previously Recorded Message
You can add a recording to the message being played back.
The added recording will be placed after the current message and counted
as a part of the message.
During playback
of Message 3
Message 3
Message 4
After adding
a recording
Message 3
Message 4
Added recording
Meeting at 2 o’clock
on December 1.
at Conference
room A
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow3nl3oad.
Adding a Recording (Continued)
1
2
During playback, press zREC/REC PAUSE
briefly.
The “REC” and “ADD” will flash and the unit stops
in the recording pause mode.
While the “REC” and “ADD” are flashing, press
zREC/REC PAUSE.
The “REC” is displayed and “ADD” flashes for 3
seconds on the display window. The OPE indicator
will turn red. Then the new recording will be added
at the end of the current message.
3
Press xSTOP to stop the recording.
Adding an Overwrite Recording during Playback
You can add an overwrite recording after the selected point in a recorded
message. The part of the message after the selected point is deleted.
The starting point of an overwrite recording
Message 2
Message 2
Message 3 Message 4
The deleted part of
Message 2
Message 3 Message 4
Added overwrite recording in Message 2
1
2
During playback, press zREC/REC PAUSE
briefly.
The “REC” is displayed. “OVER” flashes on the
display window and the OPE indicator flashes in red.
Press zREC/REC PAUSE to start recording.
The display returns to the display mode set in the
menu and the OPE indicator turns red.
3
34
Press xSTOP to stop the recording.
GB
Erasing Messages
You can erase the recorded messages one by one or all messages in a folder
at a time.
Note
Once a recording has been erased, you cannot retrieve it.
ERASE
xSTOP
Jog lever (FOLDER)
Erasing Messages one by one
You can erase unnecessary messages only.
When a message is erased, the remaining messages will advance and be
renumbered so that there will be no space between messages.
Erase Message 3
Message 1 Message 2 Message 3 Message 4 Message 5
Before erasing
After erasing Message 1 Message 2 Message 3 Message 4
Remaining messages are renumbered.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow3nl5oad.
Erasing Messages (Continued)
1
Press ERASE while playing back the
message you want to erase or press
ERASE for more than 1 second during
stop mode.
The message number and “ERASE”
will flash while the first and last 5
seconds of the message are played
back 10 times.
2
Press ERASE while the message is being played back and
“ERASE” is flashing.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the following
message.)
To cancel erasing
Press xSTOP before step 2.
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message (see page 38) and then follow the steps on this
page to erase the message.
GB
36
Erasing All Messages in a Folder
You can erase all recorded messages in a folder.
1
Turn the jog lever toward
FOLDER repeatedly to display
the folder (A, B, C, D or E)
containing the messages you
want to erase.
2
While pressing xSTOP, press
ERASE for more than 1 second.
The message number and “ALL
ERASE” will flash for 10 seconds.
3
While “ALL ERASE” is flashing,
pressing ERASE.
All the recorded messages contained
in the folder are deleted. The folder
itself will not be deleted.
To cancel erasing
Press xSTOP before step 3.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow3nl7oad.
Dividing a Message into Two/
Combining Messages
You can divide a message, or combine messages.
•You can divide a message into two while recording/playing back
messages.
•You can combine messages in stop mode (see page 40).
ERASE
xSTOP
Jog lever (>/.)
DIVIDE/
(bookmark)
Note
Due to the recording system of an IC recorder, you may not be able to divide or
combine messages in some cases (pages 59 and 62).
Dividing a Message
You can divide a message during recording or playback, so that the
message is divided into two and the new message number is added to the
divided message. By dividing a message, you can easily find the point
you want to play back when you make a long recording such as a meeting.
You can divide a message until the total number of messages in the folder
becomes 99.
Notes
• You need a certain amount of space in the memory to divide a message. For
more information, see “System Limitations“ on page 62.
• If you divide a message with priority mark(s), priority mark(s) will be added
to both parts of the divided message.
GB
38
While recording or playing back a message, press DIVIDE/
(bookmark) at the point you want to divide.
• When you press DIVIDE/
(bookmark) during recording:
The new message number is added at
the point you pressed the button, and
the new message number and
“DIVIDE“ flashes for 3 seconds. The
message will be divided into two;
however, the messages will be
recorded without a break.
Message 1 Message 2 Message 3
A message is divided.
Recording continues.
1 Tip
You can divide a message during recording pause.
• When you press DIVIDE/
(bookmark) during playback:
The message is divided into two at the
point you pressed the button, and the
new message number and “DIVIDE“
flashes for 3 seconds. The message
numbers of the following messages
will increase by one.
Message 1
Message 2
Message 3
A message is divided.
The message
numbers increase.
Message 1 Message 2 Message 3 Message 4
To play the divided message
Press the jog lever up or down (>/.) to display the message number
as the divided messages have message numbers.
1 To play the divided messages continuously
Select ON for CONT in the menu as described in “Changing the Settings” on
page 52.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow3nl9oad.
Dividing a Message into Two/Combining
Messages (continued)
Combining Messages
You can combine two messages into one.
Message 1 Message 2 Message 3 Message 4
Messages are combined
The message numbers
decrease.
Message 1
Message 2
Message 3
Note
After combining messages, the latter message’s alarm setting, priority mark(s)
and bookmark will be deleted.
1
2
Press xSTOP to stop the IC recorder.
Press the jog lever up or down (>/.) to display the
number of the second of the two messages you want to
combine.
3
4
While pressing DIVIDE/
press ERASE for more than 1 second.
“CMB” will flash for 10 seconds.
(bookmark),
Press ERASE while the display is
flashing.
The two messages are combined into one
and the messages will be renumbered as in
the illustration on this page.
To cancel erasing
Press xSTOP before step 4.
GB
40
Moving Messages to a Different Folder
You can move the recorded messages to another folder. When you move a
message to another folder, the one in the previous folder will be deleted.
xSTOP
Jog lever (FOLDER/x•B)
Example: Moving Message 3 in Folder B to Folder C
1
Play back the message you want to
move.
2
Turn the jog lever toward FOLDER
repeatedly to select the folder that you
want to move the message into.
The destination folder and “MOVE” flash.
The first and last 5 seconds of the message
will be played back.
3
Press the jog lever (x•B).
The message is moved to the destination
folder. Messages are sorted in order of the
recorded date and time or the number of the
priority marks in the folder.
To cancel moving the message
Press xSTOP before step 3.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow4nl1oad.
Adding Priority Mark(s)
— Priority Mark Function
Usually the recorded messages are lined up in the order of recording.
By adding priority marks (#) to important messages, you can renumber
the messages in the order of their priority. There are four levels, “###”
(the most important), “##”, “#”, and no priority mark. You can add
priority marks both in the stop mode and in the playback mode.
xSTOP
Jog lever (x•B)
A-B
(repeat)/PRIORITY
Adding Priority Mark(s) in the Stop Mode
1
Select the message you want to mark.
2
Press A-B
more than 1 second.
(repeat)/PRIORITY for
“#” and the message number indication will
flash on the display window.
3
Press A-B
(repeat)/PRIORITY
repeatedly to select the number of
priority mark(s) (#) while indications
are flashing.
The setting is finished when the priority
mark(s) (#) light(s) steadily in the display
window and the messages are renumbered.
GB
42
Adding Priority Mark(s) during Playback
1
Press A-B
(repeat)/PRIORITY for
more than 1 second during playback of
the message you want to mark.
“#” and the message number indication will
flash on the display window while the first
and last 5 seconds of the message is played
back 10 times.
2
Press A-B
repeatedly to select the number of
(repeat)/PRIORITY
priority mark(s) (#).
3
Press the jog lever (x•B) to fix the
setting.
The setting is finished and the messages will
be renumbered.
e.g. When there are 3
messages in a folder
Messages with priority mark(s)
Messages are sorted in order of the number of priority mark(s) (#) in a
folder. Messages without a priority mark are moved behind the messages
with priority mark(s).
Message 1
Message 2
Message 3
1 Tip
If there are over 2 messages with the same number of priority marks in a folder,
these messages are sorted by the recorded date and time (The oldest one comes
first).
Note
You can also add priority mark(s) using the supplied “Digital Voice Editor“
software. But messages are not sorted in order of the number of the priority
marks unless you sorted by the number of priority marks using the software.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow4nl3oad.
BOther Functions
Playing Back a Message at a Desired
Time with an Alarm
You can sound an alarm and start playback of a selected message at a desired
time. You can have the message played back at a specified date, once every
week, or the same time everyday.
You can also sound the alarm without playing back a message.
Note
When the clock is not set or no messages are recorded, you cannot set the alarm.
Jog lever (>/./x•B/MENU)
1
2
Select the message you want to
play back.
For more information about
selecting the desired message, see
step 1 and 2 of “Playing Back
Messages“ on page 18.
Enter the alarm setting mode.
1Press the jog lever toward MENU.
The menu mode will be displayed
in the display window.
2Press the jog lever up or down
(>/.) to select “ALARM
OFF”.
If the alarm has been already set
to “ON”, “ALARM ON” will be
displayed.
GB
44
3Press the jog lever (x•B).
The alarm setting mode will be
displayed in the display window.
4Press the jog lever up or down
(>/.) to select “ON”.
If “ON” has already been selected,
follow the next step.
5Press the jog lever (x•B).
“DATE” will be displayed in the
display window.
3
Set the alarm date and time.
To play back on a desired date
1Press the jog lever (x•B) while
“DATE” is displayed.
The year digits will flash.
2Press the jog lever up or down
(>/.) to select the year
digits and press the jog lever
(x•B).
The month digits will flash.
3Set the month and the day in
sequence, then press the jog lever
(x•B).
To play back once a week
Press the jog lever up or down
(>/.) to select the day of the
week (“SUN” for Sunday to “SAT”
for Saturday). Then press the jog
lever (x•B).
To play back at the same time every day
Press the jog lever up or down
(>/.) to select “DAILY”. Then
press the jog lever (x•B).
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow4nl5oad.
Playing Back a Message at a Desired Time with an
Alarm (continued)
4
Select the alarm time.
1Press the jog lever up or down
(>/.) to select the hour
digits, and press the jog lever
(x•B).
The minute digit will flash.
2Press the jog lever up or down
(>/.) to select the minute
digits, and press the jog lever
(x•B).
5
Press the jog lever up or down
(>/.) to select the alarm
sound either from “B-PLAY” (for
starting playback after the
alarm) or “B-ONLY” (for only the
alarm).
6
7
Press the jog lever (x•B).
The setting is finished.
Press the jog lever toward MENU
to exit the menu mode.
The normal display appears.
“,” is displayed when the message
having an alarm setting is selected.
When the set date and time comes
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back (If you have selected “B-ONLY“ in step 5,
only the alarm will sound).
During alarm playback, “ALARM” will flash in the display window.
When the playback ends, the unit will stop automatically at the beginning
of that message.
GB
46
1To listen to the same message again
Press the jog lever (x•B). The same message will be played back from the
beginning.
1To cancel the alarm setting before the playback starts
Press xSTOP while the alarm sound is heard. You can stop the alarm playback
even when the HOLD function is activated.
To cancel the alarm setting
In step 2 on page 44, select “OFF” and then press the jog lever (x•B).
To check the alarm setting
Follow steps 1 through 2 on page 44 to display the current alarm date and
time. Then follow steps 3 to 7 on pages 45 and 46 to change the alarm date
and time.
Notes
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the alarm time comes during recording, the alarm will sound after the recording
is finished. “,” will flash when the alarm time comes.
• If more than one alarm time comes during recording, only the first message will
be played back.
• When the alarm time comes when the unit is in the menu mode, alarm will sound
and the menu mode will be cancelled.
• If you divide a message you set the alarm for, alarm setting remains on only the
first part of the divided message.
• If you combine messages you set the alarm for, the alarm setting of the latter
message will be cancelled.
• Alarm setting will not be cancelled when the alarm playback finishes.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow4nl7oad.
Turning off the OPE Indicator (LED)
During recording and playback, the OPE (operation) indicator lights or
flashes. You can set the OPE indicator to turn off even in operation.
OPE indicator
Jog lever (>/./x•B/MENU)
1
Turn the jog lever toward MENU.
The menu mode will be displayed.
2
3
Press the jog lever up or down
(>/.) to select “LED ON”.
Press the jog lever (x•B).
The LED setting mode will be
displayed.
4
5
Press the jog lever up or down
(>/.) to select “OFF”, and
then press the jog lever (x•B).
The setting is changed.
Press the jog lever toward MENU
to exit the menu mode.
The normal display appears.
To turn on the OPE indicator
In step 4 , select “ON” and then press the jog lever (x•B).
GB
48
Preventing Accidental Operation —
HOLD Function
HOLD switch
Slide the HOLD switch in the direction of the
arrow. “HOLD” will flash for 3 seconds,
indicating that all the functions of the buttons are
locked.
When the HOLD function is activated during
stop, all the display will be turned off after
“HOLD” flashes.
To cancel the HOLD function
Slide the HOLD switch in the opposite direction.
1 Tip
Even if the HOLD function is activated, you can stop the alarm playback. To
stop the alarm or playback, press xSTOP. (You cannot stop usual playback.)
GB
Download from Www.Somanuals.com. All Manuals Search And Dow4nl9oad.
Using an Adding Recording
At a factory setting, you cannot add a recording (page 33) not to erase the
message by accidental operation. If you want to add a recording to a
previously recorded message (page 33) or add an overwrite recording
(page 34), change the REC-OP setting in the procedures below.
Jog lever (>/./x•B/
MENU)
1
2
Turn the jog lever toward MENU.
The menu mode will be displayed in the display
window.
Press the jog lever up or down (>/.)
to select “REC-OP”, then press the jog lever
(x•B).
The adding recording window will be displayed.
3
4
Press the jog lever up or down (>/.)
to select “ON”, then press the jog lever
(x•B).
The setting is changed.
Press the jog lever up or down (>/.)
to select “ADD” or “OVER”, then press the
jog lever (x•B).
•ADD: adds a recording to a
previously recorded message
•OVER: adds an overwrite recording
5
Press the jog lever toward MENU to exit
the menu mode.
The normal display appears.
To prohibit to add a recording
In step 3 , select “OFF” and then press the jog lever (x•B).
GB
50
Changing the Settings — MENU
You can use the menu to change the IC recorder settings. During playback
and recording, the menu items to be displayed are limited. Follow the
procedures below to display the menu and change the settings:
1 Turn the jog lever toward MENU.
The menu mode will be displayed.
2 Press the jog lever up or down (>/.) to select the menu item for
which you want to change setting.
3 Press the jog lever (x•B).
The setting mode of the selected menu item will be displayed.
4 Press the jog lever up or down (>/.) to select the setting that you
want to set, and then press the jog lever (x•B).
The setting will be changed.
5 Turn the jog lever toward MENU to exit the menu mode.
The window will return to normal display.
Note
If you do not press any keys for one minute, the menu mode is automatically
cancelled and the window will return to normal display.
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow5nl1oad.
Changing the Settings — MENU (continued)
Menu items Settings (*: Initial setting)
Stop/Play/Rec**
SENS
Displays the window to set the microphone
sensitivity.
H (high): To record at meetings or in a quiet
and/or spacious place.
M*(middle): To record at meetings or in a
quiet and/or small place.
OK/–/OK
L (low): To record dictation or in a noisy
place.
VOR
Displays the window to set the VOR (Voice
Operated Recording) function.
ON:
The VOR function is activated.
Recording starts when the unit
detects sound and stops when no
sound is heard, eliminating
OK/–/OK
recording from soundless period.
OFF*:
The VOR function is disabled.
Normal recording operation is
selected.
DPC
Displays the window to set the playback
speed (ON/OFF*). See page 29.
OK/OK/–
CONT
Displays the window to set the continuous
play.
ON:
You can play back all messages
in a folder continuously.
OK/OK/–
OFF*:
Playback stops at the end of each
message.
**Displays whether you can change the setting in each operation mode (Stop:
stop mode/Play: playback mode/Rec: recording mode): “OK” shows the
setting can be changed and “–” shows the setting cannot be changed.
GB
52
Menu items Settings (*: Initial setting)
Stop/Play/Rec**
EASY-S
Displays the window to set the easy search
function.
ON:
You can go back for approx. 3
seconds by pressing the jog lever
down (.), or advance for
approx. 10 seconds by pressing
the jog lever up (>).
OK/–/–
OFF*:
You can go back or forward the
messages by pressing the jog
lever down or up (./>).
BEEP
ON*:
OFF:
A beep will sound to indicate
that operation has been accepted.
OK/–/–
No beep sound will be heard
except for the alarm.
ALARM
Displays the window to set the alarm
(ON/OFF*). See page 44.
OK/–/–
SET DATE Displays the window to set the clock
(03Y1M1D*). See page 8.
OK/–/–
DISP
Displays the window to change the
display mode (COUNT*). See page 26.
OK/OK/OK
MODE
Displays the window to set the
recording mode:
ST*:
You can record with stereo
sound.
You can record with better
sound (monaural sound).
You can record for longer
time (monaural sound).
OK/–/–
SP:
LP:
LED
Displays the window to turn on or off
the OPE indicator during operation
(ON*/OFF). See page 48.
OK/–/–
REC-OP
Displays the window to set the adding
recording mode (ON/OFF*). See page
50.
OK/–/–
GB
Download from Www.Somanuals.com. All Manuals Search And Dow5nl3oad.
Using the ”Digital Voice Editor“
Software
By connecting the IC recorder to your computer with the supplied USB
cable, you can use the “Digital Voice Editor” software to do the following:
•Saving the IC recorder messages on your computer’s hard disk.
•Transferring the PC messages back to the IC recorder.
•Playing or editing the messages on your computer.
•Sending a voice e-mail message using MAPI e-mail software.
•Transcribing your IC recorder message using Dragon
NaturallySpeaking® speech-recognition software (not supplied).
For the details, see the supplied “Digital Voice Editor 2” software
operating instructions.
Connection
To USB
To USB connector
of IC recorder
connector of
your computer
Connecting cable
(supplied)
GB
54
System requirements
Your computer and system software must meet the following minimum
requirements.
• IBM PC/AT or compatible
®
–
–
–
CPU: 266MHz Pentium II processor or higher
RAM: 64MB or more
Hard disk space: 70MB or more depending on the size and number of
sound files you store
–
–
–
–
CD-ROM drive
USB port
Sound board: Sound Blaster 16 compatible
Display: High color (16 bits) or more and 800 x 480 dots or more
®
®
• OS: Microsoft Windows XP Home Edition/XP Professional/2000
Professional/Millennium Edition/98/98 Second Edition standard
®
installation (You cannot use this software with Windows 95 or
®
Windows NT.)
Notes
• You cannot use the software with a Macintosh machine.
• A handmade computer, a computer whose operating system is installed or
upgraded by the user, or a computer with multi-boot operating environment
are not supported.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow5nl5oad.
BAdditional Information
Precautions
On power
•Operate the unit only on 3 V DC. Use two LR 03 (size AAA) alkaline
batteries.
On safety
•Do not operate the unit while driving, cycling or operating any
motorized vehicle.
On handling
•Do not leave the unit in a location near heat sources, or in a place subject
to direct sunlight, excessive dust or mechanical shock.
•Should any solid object or liquid fall into the unit, remove the batteries
and have the unit checked by qualified personnel before operating it any
further.
On noise
•Noise may be heard when the unit is placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
•Noise may be recorded when an object, such as your finger, etc., rubs or
scratches the unit during recording.
On maintenance
•To clean the exterior, use a soft cloth slightly moistened in water. Do not
use alcohol, benzine or thinner.
Keep personal credit cards using magnetic coding or spring-wound
watches, etc., away from the unit to prevent possible damage from the
magnet used in the speaker.
If you have any questions or problems concerning your unit, please
consult your nearest Sony dealer.
Backup recommendations
To avoid potential risk of data loss caused by accidental operation or
malfunction of the IC recorder, we recommend that you save a backup
copy of your recorded messages on a tape recorder or to a computer,
etc.
GB
56
Troubleshooting
Before taking the unit for repair, check the following sections. Should any
problem persist after you have made these checks, consult your nearest
Sony dealer.
IC Recorder
Symptom
Remedy
The unit does not
operate.
•The batteries have been inserted with incorrect
polarity (page 6).
•The batteries are weak.
•The buttons are locked with the HOLD switch
(page 49). (If you press any button, “HOLD”
will flash for 3 seconds.)
No sound comes
from the speaker.
•The volume is turned down completely.
Sound comes from
the speaker even
when the ear
receiver is plugged
in.
•If you plug in the ear receiver not securely
during playback, the sound may come from
the speaker. Unplug the ear receiver and then
insert it securely.
The OPE indicator
does not light.
•LED is set to OFF. Display the menu and set
the LED to ON.
“FULL” is displayed
and you cannot start
recording.
•The memory is full. Erase some of the
messages (page 35).
•99 messages have been recorded in the selected
file. Select another file or erase some of the
messages (page 35).
Continued
GB
Download from Www.Somanuals.com. All Manuals Search And Dow5nl7oad.
Troubleshooting (continued)
Symptom
Remedy
You cannot erase a •The message or the folder which contains the
message.
message is set to “Read-only“ in the computer.
Display the message using Windows Explorer
and remove the check for “Read-only“ under
“Properties“.
You cannot
add a recording or an
overwrite recording.
•The remaining memory is too short. The
overwritten part will be deleted after the
overwriting part finishes recording. Therefore,
you can only overwrite within the remaining
recording time.
•At a factory setting, REC-OP is set to OFF.
Display the menu and set the REC-OP to ON
(page 50) .
Recording is
interrupted.
•The advanced VOR function (page 14) is
activated. Set the VOR to OFF.
Noise is heard.
•An object, such as your finger, etc., accidentally
rubbed or scratched the unit during recording
so that noise was recorded.
•The unit was placed near an AC power source,
a fluorescent lamp or a mobile phone during
recording or playback.
•Plug of the connected microphone was dirty
when recording. Clean the plug.
•The i (headphones) plug is dirty. Clean the
plug.
Recording level is
low.
•SENS (microphone sensitivity) is set to L.
Display the menu and set SENS to H or M
(page 52).
Recording level is
unstable (when
recording music, etc.).
•This unit is designed to automatically adjust
the recording level when recording meetings,
etc., and is not suitable for music recording.
Recording is
•If you use a connecting cable without register
to connect the sound source to the IC recorder,
sound may be recorded interrupted. Make
sure to use a registered connecting cable.
interrupted (when
recording from an
external device).
GB
58
Symptom
Remedy
Playback speed is
too fast or too slow.
•The playback speed is adjusted in DPC. Slide
the DPC switch to OFF or display the menu
and adjust the speed in DPC again (page 29).
“--:--” is displayed. •You have not set the clock (page 8).
“--Y--M--D” or ” --:--”•The date of recording will not be displayed if
is displayed on the
you recorded the message when the clock was
REC DATE display. not set.
You cannot
combine messages.
•The bookmark is set for the message. Delete
the bookmark, and then combine messages.
Messages are not
•Unless you sort messages using the supplied
sorted in order of the “Digital Voice Editor“ software, messages are
number of priority
marks in a folder.
sorted in the unit the same as the setting in the
computer. Sort again in the order of the
number of priority marks in the computer
using the supplied “Digital Voice Editor“
software.
The remaining time •The unit requires a certain amount of memory
displayed in the
display window is
shorter than that
displayed in the
supplied “Digital
Voice Editor“
for system operation. That amount is
subtracted from the remaining time, which is
the reason for the difference.
software.
The battery life is
short.
•The battery life on page 7 is based on playback
through internal speaker with the medium
volume level (using Sony alkaline batteries
LR03(SG)). The battery life may shorten
depending on the operation of the unit.
The unit does not
operate correctly.
•Take out the batteries and insert them again
(page 6).
Please note that recorded messages may be erased during service or repair
work.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow5nl9oad.
Troubleshooting (continued)
Error Messages of the IC Recorder
Error message
Cause/Remedy
“ERR ACCESS“ •The IC recorder failed in memory access.
Remove and then insert the batteries.
“ERR DATA“
•The file is not supported by the “Digital Voice
Editor” software, or the file itself is corrupted.
“FULL”
•The remaining memory of the IC recorder is too
small. Erase some messages before recording
(page 35).
•When there are already 99 messages in the
selected folder or the remaining memory of the
IC recorder is short, you cannot divide a
message. Erase some messages before dividing a
message (page 35).
“LO BATT“
•Batteries are weak. Replace batteries with new
ones.
“NO DATA“
•The selected folder does not have any messages.
You cannot set the alarm, etc. because of this.
“NO ERASE”
•You cannot combine messages of different modes.
“PRE SET”
•You set the alarm to play back a message at a date
and time previously set on another message.
Change the alarm setting.
•If you do not set date and time, you cannot make
alarm or time recording setting. To set date and
time, see page 8.
“SET DATE”
For the error messages of the “Digital Voice Editor”, please refer to the
online Help files.
GB
60
If an error message with a number is displayed
If the following error display appears, please consult your nearest Sony
dealer.
Error number Cause
“ERR 01”
The IC recorder cannot access the memory or cannot
format the memory.
“ERR 02”
The IC recorder cannot write (record or erase) the data
in the memory.
“ERR 03”
“ERR 04”
“ERR 05”
The IC recorder cannot read the memory.
The IC recorder cannot load or write the settings.
An error other than the above occurs.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow6nl1oad.
Troubleshooting (continued)
System Limitations
There are some system limitations of the unit. Troubles as mentioned
below are not malfunctions of the unit.
Symptom
Cause/Remedy
You cannot record
messages up to the
maximum recording
time.
•If you record messages in a mixture of ST, SP
and LP modes, the recordable time varies from
the maximum ST mode recording time to the
maximum LP mode recording time.
•The sum of the number on the counter (elapsed
recording time) and the remaining recording
time may be less than the unit’s maximum
recording time.
•You cannot divide a message in a folder which
has 99 messages.
You cannot divide
a message.
•If you divide or combine messages frequently,
the unit may become unable to divide a
message.
You cannot combine
messages.
•You cannot combine different recording mode
(ST/SP/LP) messages.
•If you divide or combine messages frequently,
the unit may become unable to combine
messages.
GB
62
Specifications
Recording media
Built-in flash memory 32MB (ICD-ST20)/16MB
(ICD-ST10), Stereo/Monaural recording
• ICD-ST20: 85 minutes (ST), 261 minutes (SP), 696
minutes (LP)
Recording time
• ICD-ST10: 41 minutes (ST), 125 minutes (SP), 334
minutes (LP)
Speaker
Approx. 28 mm (1 1/8 in.) dia.
Power output
Input/Output
350 mW
• Microphone jack (minijack, stereo)
– input for plug in power, minimum input level
0.6 mV, 3 kilohms or lower impedance microphone
• Headphones jack (minijack, stereo)
–
output for 8 - 300 ohms ear receiver
• USB connector
Playback speed control
Power requirements
+100% to -50% (DPC)
Two LR03 (size AAA) alkaline batteries: 3 V DC
Dimensions (w/h/d) (not incl. projecting parts and controls)
17
41.5 × 103.6 × 13.3 mm (1 11
75 g (2.65 oz)
/
16 × 4 1/8 ×
/32 in.)
Mass (incl. batteries)
Supplied accessories
Stereo Ear Receiver × 1
USB Connecting cable × 1
Application Software (CD-ROM) × 1
Carring Case x 1
LR03 (size AAA) alkaline batteries × 1*
*For the United States model only
Stereo ear receiver MDR-EX70
Stereo Headphones MDR-E848LP
Optional accessories
Electret condenser microphone ECM-719
Connecting cable RK-G134/G136 (excluding
Europe)
AC power adaptor AC-E30HG
(For the People’s Republic of China Model, you
cannot use the AC power adaptor.)
Your dealer may not handle some of the above listed optional accessories. Please
ask the dealer for detailed information.
Design and specifications are subject to change without notice.
GB
Download from Www.Somanuals.com. All Manuals Search And Dow6nl3oad.
Index to Parts and Controls
Refer to the pages indicated in parentheses for details.
Front
1
2
3
qa
4
5
6
7
8
9
q;
qs
qd
qf
qg
1 Built-in microphone (11, 13)
2 Built-in microphone (11, 13)
3 OPE (operation) indicator
(11, 19)
4 DIRECTNL (directional)
switch (13)
0 Speaker
qa zREC (record) /REC
PAUSE button (11, 33)
qs xSTOP button (12, 20)
qd Jog lever
FOLDER/MENU/
5 ERASE button (35)
.(review/fast backward)/
> (cue/fast forward)/
x• B (play/stop•enter)
qf VOL (volume) +/– buttons
(19)
6 A-B
button (32, 42)
7 DIVIDE/ (bookmark)
button (31, 38)
(repeat)/PRIORITY
qg USB connector (54)
8 Display window (23)
9 DPC ON/OFF switch (29)
GB
64
Rear
qh
qj
qk
w;
ql
qh m (microphone) jack (16)
qj i (headphones) jack (17, 19)
qk HOLD switch (28, 49)
ql DC IN 3V jack (6)
(For the People’s Republic of
China Model, this jack does
not work.)
w; Battery compartment (6)
GB
Download from Www.Somanuals.com. All Manuals Search And Dow6nl5oad.
Index
A
E
A-B repeat .................................... 32
Easy search ........................... 21, 53
Erase, bookmark ......................... 31
Erase, messages ........................... 35
Error messages ............................ 60
Error numbers ............................. 61
External microphone .................. 16
“ACCESS“ message......................
7
Accidental operation .................. 49
Add, bookmark ........................... 31
Add, priority marks ................... 42
Add, recording ............................ 33
Advanced VOR .................... 14, 52
Alarm............................................ 44
F
Folder .................................... 11, 18
B
Battery ............................................
6
H
Beep .............................................. 53
Bookmark ..................................... 31
Built-in microphone ............. 11, 13
Hold ....................................... 28, 49
L
LED ............................................... 48
LP mode ........................... 7, 10, 53
C
Clock setting ..................................
8
Combine ....................................... 40
Connecting, computer ............... 54
Connecting, external
M
Maximum recording time ......... 10
Menu............................................. 51
Message, adding ......................... 33
Message, erasing ......................... 35
Message, move ............................ 41
Message, playing back ............... 18
Message, recording..................... 10
Message number .................. 11, 18
Microphone, built-in .................. 11
Microphone, connecting ............ 16
Microphone, external ................. 16
Microphone sensitivity ....... 13, 52
Monitoring recording ................. 14
Move ............................................. 41
microphone .................................. 16
Connecting, other device ........... 17
Continuous playback .......... 21, 52
Counter display .......................... 27
Cue ................................................ 21
D
Digital Voice Editor .................... 54
Display mode .............................. 26
Display window ......................... 23
Divide ........................................... 38
DPC
(Digital Pitch Control) .. 20, 29, 52
O
Overwrite recording ................... 34
GB
66
P
Playback ....................................... 18
Playback pause function ............ 20
Playback speed .............. 20, 29, 52
Playing back continuously ........ 21
Plug in power .............................. 16
Priority marks ............................. 42
R
Recorded date/time display ..... 27
Recording mode .............. 7, 10, 53
Recording pause function ......... 12
Remaining battery ........................
7
Remaining display ...................... 27
Remaining memory .................... 15
Repeat play ........................... 22, 32
Review ................................... 12, 21
S
Search forward/backward ........ 21
SP mode ........................... 7, 10, 53
ST mode ........................... 7, 10, 53
System limitations ...................... 62
System requirements .................. 55
T
Turning off the display .............. 28
Turning off the indicator ........... 48
U
USB cable ..................................... 54
V
Volume control ........................... 19
VOR ....................................... 14, 52
GB
Download from Www.Somanuals.com. All Manuals Search And Dow6nl7oad.
Printed on 100% recycled
paper using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
Sony Corporation
Printed in Japan
|