Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
Notes
1 Remove the insulation film of the backup
2 Press TUNING + or – (TUNE + or – on the
To know when to replace the
battery
No.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Channel
9B
Frequency
204.640
206.352
208.064
209.936
211.648
213.360
215.072
216.928
218.640
220.352
222.064
223.936
225.648
227.360
229.072
230.784
232.496
234.208
235.776
237.488
239.200
WARNING
The clock setting is available in clock state only.
battery at the bottom of the unit.
remote) to turn to the desired service or
(When using radio, iPod or AUDIO IN, press
OFF to set the clock.)
4-199-738-13(1)
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or
moisture.
station.
When the battery becomes weak, “” appears in
the display.
9C
If a selected DAB service has finished
broadcasting, sound stops and “NO
SERVICE” appears. In this case, press
If you do not press any button for about
1 minute while setting the clock, the clock
setting will be canceled.
A 100-year calendar (2010 - 2109) is installed in
the unit. When the date is set, the day of the
week is automatically displayed.
MON = Monday, TUE = Tuesday,
WED = Wednesday, THU = Thursday,
FRI = Friday, SAT = Saturday, SUN = Sunday
9D
If a power interruption occurs while the battery is
weak, the current time and alarm settings will be
erased.
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may cause a fire or
explosion.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place lighted
candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
by inappropriate waste handling of the battery.
The recycling of the materials will help to
conserve natural resources.
10A
10B
10C
10D
11A
11B
11C
11D
12A
12B
12C
12D
13A
13B
13C
13D
13E
13F
iPhone 3G
iPhone
TUNING + or – (TUNE + or – on the
remote) to select another service.
Notes
3 Adjust volume using VOLUME + or –
In these Operating Instructions, “iPod” is used
as a general reference to functions of iPod on an
iPod or iPhone, unless otherwise specified by
the text or illustrations.
The connector of the unit is for sole use with an
iPod. If you use devices that do not match with
the connector, connect to the AUDIO IN jack of
this unit with the supplied audio connecting
cable.
(VOL + or – on the remote).
To turn off the radio, press OFF.
To replace the battery
Note
1 Keep the AC plug connected to the AC
outlet, remove the screw that secures the
battery compartment lid at the bottom of
the unit using a screwdriver, and open
the lid (see Fig. ).
2 Remove the old battery and insert a new
one in the battery compartment with the
side facing up (see Fig. ).
3 Replace the battery compartment lid and
secure it with the screw (see Fig. ).
4 Press iPod & iPhone , DAB/FM,
AUDIO IN or SNOOZE/DATE/SLEEP
OFF to turn “” off in the display.
To change the time format
You can choose a time format between 12-hour
system (default) and 24-hour system.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
2 Extend the wire aerial fully.
MENU and TUNING + or – are not available when
“Tuning…” is displayed.
3 Plug in the unit.
“AM 12:00” and “FRI 01-01-2010” flash for
about 2 seconds, then “Scanning...” appears in
the display.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
Personal Audio
Docking System
Note on FM usage
The frequency step is set to 0.05 MHz on FM.
1 Press MENU and SELECT
“Time Format,” and then press ENTER
2 Press SELECT or to select the desired time
or
to select
.
Sony cannot accept responsibility in the event
that data recorded to an iPod is lost or damaged
when using an iPod connected to this unit.
The unit will automatically scan and create a
list of receivable DAB broadcasts. The services
are stored in the list in alphabetical order.
Note on DAB usage
“NO SERVICE” appears when the selected service
cannot be received.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
format, and then press ENTER
.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the
applicable collection point for the recycling of
electrical and electronic equipment.
The time format toggles between 12-hour
system (“AM 12:00” = midnight) and 24-hour
system (“0:00” = midnight).
About the SC (Secondary Component)
If the selected primary component has a
secondary component, “SC” flashes in the display.
Troubleshooting
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Operating Instructions
To change the date format
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
Press TUNING + or
–
(
TUNE + or on the
–
1 Press MENU and SELECT
“Date Format,” and then press ENTER
2 Press SELECT or to select the desired
date format, and then press ENTER
or to select
When scanning is finished, the unit gets the time
from the DAB data of the first station received.
The current time appears in the display.
remote) to receive the desired secondary
component. “SC” lights up while the secondary
component is being received.
.
The clock flashes “AM 12:00” or “0:00” due to
a power interruption.
The nameplate and important information
concerning safety are located on the bottom
exterior.
Note
For all other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
.
Note
Notes
The battery is low. Replace the battery. Remove
Do not disconnect the plug from the AC outlet,
when you replace the battery. Otherwise, the
calendar, current time, alarm settings and station
presets will be erased.
When the selected secondary component is
finished, the unit returns automatically to the
primary component.
If no broadcasts are found by the DAB scan,
“NO STATION FOUND” appears for about
2 seconds, then “AM 12:00” flashes in the
display. The clock cannot be set. In this case, set
the clock manually (see “Setting the clock
manually”).
If the system clock is already running (has been
set manually or synchronized from DAB
before), the system will not try to enter the
DAB function automatically when powering on
the unit.
The clock time cannot be set via DAB data if it
is within an hour ahead or behind the start or
end of daylight saving time (summer time). In
this case, power on the unit at another time
setting, or set the clock manually (see “Setting
the clock manually”).
the old battery and install a new one.
To display the year and date when
using radio
Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
the remote).
After a few seconds, the display will change back
to the current service or station automatically.
General
Speaker
Make sure to remove the insulation film of the
backup battery before use.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
Approx. 5.7 cm (2 1/4 inches) dia. 6 Ω
Presetting your favourite
services or stations
The alarm of radio, iPod or buzzer does not
sound at the preset alarm time.
Check that alarm “A” or alarm “B” is properly
displayed.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
Input
XDR-DS12iP
Notice for customers: the following
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
3.5 W + 3.5 W (at 10% harmonic distortion)
Power requirements
230 V AC, 50 Hz
For clock back up: 3V DC, CR2032 battery (1)
information is only applicable to equipment
sold in countries applying EU directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
108-0075 Japan. The Authorized Representative
for EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters,
please refer to the addresses given in separate
service or guarantee documents.
You can preset up to 10 services in DAB (5 services
in DAB1, 5 services in DAB2) and 10 stations in
FM (5 stations in FM1, 5 stations in FM2).
The alarm of radio or iPod is activated but no
sound comes on at the preset alarm time.
Check the alarm volume setting.
Setting the brightness
of the display
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Presetting services or stations
1 Follow steps 1 to 2 in “Operating the
radio” and manually tune in to the
station you want to preset.
2 Press and hold the favourite STATION
SELECT PRESET 1 to 5 button on the
unit.
There is no sound from the iPod.
Make sure the iPod is securely connected.
Adjust the VOLUME.
Dimensions
Four levels of brightness are available by pressing
Approx. 290.5 mm × 152.0 mm × 139.5 mm (w/h/d)
BRIGHTNESS.
(11 3/8 inches × 5 15 16 inches × 5 1/2 inches)
/
Features
including projecting parts and controls
+
No Power No Problem is a trademark of Sony Corporation.
Printed in China
DAB/DAB /FM Tuner
The iPod cannot be operated with this unit.
Make sure the iPod is securely connected.
Mass
Wake or Sleep to iPod/Radio
MEGA BASS/MEGA Xpand
Dual Alarm (A/B)
Approx. 1.7 kg (3 lb 12 oz) including power
supply unit
Supplied accessories
Remote commander (1)
Even if brightness level is set to OFF, it will
change to Middle while the alarm is sounding.
©2010 Sony Corporation
When daylight saving time
(summer time) begins
The iPod cannot be charged.
Make sure the iPod is securely connected.
“PRESET” and the number flash for about
2 seconds in the display, then change to fully
lit. The service or station is stored.
Precautions
Brightness control (High/Middle/Low/OFF)
Wireless Remote Commander
No Power No Problem alarm system to keep
the clock and the alarm operating during a
power interruption with a CR2032 battery
installed.
Operate the unit on the power source specified
in “Specifications.”
This model automatically adjusts for daylight
saving time (summer time).
Audio connecting cable (1)
Universal Dock Adapter for iPhone (1)
Universal Dock Adapter for iPhone 3G & iPhone
3GS (1)
Improving the reception
Since a strong magnet is used for the speaker,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
“
” is displayed from the beginning of daylight
Notes
Preparing the remote
commander
DAB Band-III/FM
saving time (summer time) and disappears at the
end of the daylight saving time (summer time)
automatically.
To preset another service or station, repeat
these steps.
To change the preset service or station, tune in
to the desired service or station and repeat steps
1 and 2. The new service or station will replace
the previous service or station.
Extend the wire aerial fully to increase reception
sensitivity.
Keep the wire aerial away from AC power cord.
Do not bundle the wire aerial and AC power cord
together.
For DAB reception, press DISPLAY to show the
signal strength in order to rotate the aerial for
optimum reception.
Universal Dock Adapter for iPhone 4
Before using the remote commander for the first
time, remove the insulation film.
The daylight saving time (summer time)
adjustment is based on GMT (Greenwich Mean
Time).
Design and specifications are subject to change
without notice.
Specifications
Compatible iPod/iPhone
models
Time display
Tips
Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on a surface
(a rug, a blanket, etc.) or near materials (a
curtain) which might block the ventilation holes.
Should any solid object or liquid fall into the unit,
unplug the unit and have it checked by qualified
personnel before operating it any further.
To clean the casing, use a soft cloth dampened
with a mild detergent solution.
Never touch the wire of the external aerial
during a thunderstorm. Furthermore,
immediately disconnect the AC power cord
from the radio.
Tuning in to a preset service or station
1 Press DAB/FM repeatedly to select the
desired band.
Switching between 12-hour system (default) and
24-hour system
Daylight saving time (summer time) begins at:
1:00 AM on the final Sunday of March.
Compatible iPod/iPhone models are as follows.
Update your iPod/iPhone to use the latest
software before you use it.
Notes on radio reception
Standard time begins at: 2:00 AM on the final
Sunday of October.
Section for iPod
DC out: 5V
Keep digital music players or mobile phones
away from the aerial, as this may lead to
reception interference.
When you are listening to the radio with an
iPhone connected to the unit, interference with
radio reception may occur.
When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
To know when to replace the
battery
Reset button
2 Press one of the STATION SELECT
MAX: 500mA
PRESET buttons on the unit where the
To cancel Auto DST/summer time
adjustment during the daylight saving
Radio section
Frequency range
With normal use, the battery (CR2025) should
last for about six months. When the remote
commander no longer operates the unit, replace
the battery with a new one.
desired service or station is stored.
When the service or station is not registered,
“PRESET BLANK” appears in the display.
The preset station can also be selected by
PRESET + or – on the remote.
time (summer time) period
with the side
facing up
The Auto DST/summer time adjustment can be
canceled.
Band
Frequency
Channel step
DAB
174.928 MHz -
(Band-III) 239.200 MHz
Press MENU and SELECT or to select the
“Auto DST,” and then press ENTER. Press SELECT
or to select “OFF,” and then press ENTER
again. The “ ” mark disappears from the display.
The time returns to standard time.
iPod touch
iPod touch
iPod touch
3 Adjust the volume using VOLUME + or –
3rd generation
2nd generation
1st generation
Tip
(VOL + or – on the remote).
FM
87.5 MHz -
108 MHz
0.05 MHz
NOTES ON LITHIUM BATTERY
If an FM broadcast is noisy, press MENU and
SELECT or to select “Mode,” and then press
ENTER. Press SELECT or to select “Mono,” and
then press ENTER again. “MONO” appears in the
display and the radio will play in monaural and
the sound will become clearer.
Wipe the battery with a dry cloth to assure a
good contact.
Notes
If there are no preset stations, “PRESET
BLANK” will appear when you press PRESET +
or – on the remote.
If there is only one preset station, its preset
number will flash each time you press PRESET
+ or – on the remote.
DAB (Band-III) frequency table (MHz)
To activate Auto DST/summer time
adjustment again
Be sure to observe the correct polarity when
installing the battery.
iPod nano
3rd generation
(video)
No.
1
Channel
5A
Frequency
174.928
176.640
178.352
180.064
181.936
183.648
185.360
187.072
188.928
190.640
192.352
194.064
195.936
197.648
199.360
201.072
202.928
CR2025
Press MENU and SELECT or to select the
“Auto DST,” and then press ENTER. Press SELECT
or to select “ON,” and then press ENTER again.
The “ ” mark appears in the display. The time
returns to summer time.
iPod nano
iPod nano
4th generation
(video)
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
5th generation
(video camera)
2
5B
Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
3
5C
Operating the radio
The unit can receive DAB service and FM stations.
1 Press DAB/FM repeatedly to select the
Auto preset tuning (FM only)
1 Press DAB/FM repeatedly to select the
4
5D
6A
5
Notes
Setting the clock manually
iPod nano
iPod nano
2nd generation
(aluminum)
FM band.
6
6B
Do not attempt to charge the battery.
If you are not going to use the remote
commander for a long time, remove the battery
to avoid any damage that may be caused by
leakage and corrosion.
desired band.
1st generation
iPod
5th generation
(video)
Do the following if DAB broadcast is not available
(depending on area). The time setting mode by
DAB becomes invalid.
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product. The recycling of
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
Applicable accessory: Remote Commander.
2 Press MENU and SELECT
“Auto Preset,” and then press ENTER.
3 Press SELECT or to select “Yes,” and
or to select
Each press changes the band as follows:
7
6C
DAB1
FM2
DAB2
FM1
8
6D
7A
If the time in the display is
incorrect after the battery is
changed (Reset)
1 Plug in the unit.
2 Press MENU and SELECT
9
then press ENTER.
or to select
FM1 and FM2 or DAB1 and DAB2 are the
same frequency bands.
If a list of receivable DAB broadcasts has not
been created when you select DAB1 or DAB2,
“Scanning…” will appear in the display, and
the unit starts scanning automatically.
The unit automatically presets the available
channels for both FM1 and FM2 in order.
10
11
12
13
14
15
16
17
7B
“Date & Time,” and then press ENTER.
7C
The year flashes in the display.
About the backup
battery
Press the reset button with a pointed device. The
reset button is in the small hole located in the
battery compartment (see Fig. ).
Tip
To stop auto preset tuning, press OFF.
3 Press SELECT
or to set the year, and
iPod
iPod
7D
8A
iPod classic
4th generation
(color display)
4th generation
then press ENTER.
To keep accurate time, this unit contains a
CR2032 battery as a backup power source.
The battery keeps the clock and the alarm
operating in the event of a power interruption.
4 Repeat step 3 to set the month, day, hour
8B
and minute.
8C
Setting the clock for
the first time
The seconds start incrementing from zero.
8D
9A
iPod mini
When the first time after purchase, do the
following.
Continued on the reverse side
iPhone 4
iPhone 3GS
|