– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Condensation
If your lens is brought directly from a cold place to a warm place,
condensation may appear on the lens. To avoid this, place the lens in a plastic
bag or something similar. When the air temperature inside the bag reaches
the surrounding temperature, take the lens out.
2-685-150-11(1)
– Consult the dealer or an experienced radio/TV technician for help.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cleaning the lens
Lens for Digital Single Lens
• Do not touch the surface of the lens directly.
Reflex Camera
Notes on use
• Do not leave the lens in direct sunlight. If sunlight is focused onto a nearby
object, it may cause a fire. If circumstances necessitate leaving the lens in direct
sunlight, be sure to attach the lens cap.
• If the lens gets dirty, brush off dust with a lens blower and wipe with a soft,
clean cloth (Cleaning Cloth KK-CA (optional) is recommended).
• Do not use any organic solvent, such as thinner or benzine, to clean the lens or
the camera cone.
Operating Instructions
• Be careful not to subject the lens to mechanical shock while attaching it.
• Always place the lens caps on the lens when storing.
• Do not keep the lens in a very humid place for a long period of time to prevent
mold.
135mm F2.8 [T4.5] STF
• Do not hold the camera by the lens part extended for focusing, etc.
• Do not touch the lens contacts. If dirt, etc., gets on the lens contacts, it may
interfere or prevent the sending and receiving of signals between the lens and the
camera, resulting in operational malfunction.
SAL135F28
©2006 Sony Corporation Printed in Japan
Names of parts
1
2
3
4
1···Focusing ring 2···Distance scale 3···Stepless
aperture range 4···Lens contacts 5···Mounting index
6···A position 7···Aperture ring 8···Distance index
9···Depth-of-field scale
5
This lens is a manual focus lens with a highly developed defocusing
design. A special apodization element gives defocused areas a smooth and
attractive appearance. This lens is equipped with the aperture ring that
enables a stepless aperture setting between F No.2.8-5.7 (T No.4.5-6.7*), and
makes the most of the defocusing effect in the foreground and background
areas. Enjoy this unique image-expression, which cannot be duplicated on
traditional lenses.
6
9 8
7
Attaching/detaching the lens
To attach the lens
* T No. (T-Numbers) : the T No. is a practical value that indicates how much
light is in the lens, allowing for the lens’s transmission rate. Although this
lens’s wide-open aperture is f/2.8, the special apodization system provides the
light amount of T/4.5, which is the same as that of f/4.5 on a normal lens. The
aperture value on the lens, the value indicated on a camera, and the value used
when determining the exposure are all indicated by T No. Use the T No. as a
normal aperture value.
1
Remove the rear and front lens caps and the camera body cap.
• You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the
lens cap with the lens hood attached, use method (2).
This lens is designed for Sony
cameras.
(1)
(2)
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
Do not directly look at the sun through this lens.
Doing so might harm your eyes or cause loss of eyesight.
Keep the lens out of reach of small children.
2
Align the orange index on the lens barrel with the orange index on the
camera (mounting index), then insert the lens into the camera mount and
rotate it clockwise until it locks.
There is danger of accident or injury.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries with separate collection
systems)
• Do not press the lens release button on the camera when mounting the lens.
• Do not mount the lens at an angle.
This symbol on the product or on its packaging indicates that
this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information
about recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the
product.
To remove the lens
While pressing and holding the lens release button on the camera, rotate the
lens counterclockwise until it stops, then detach the lens.
Attaching the lens hood
It is recommended that you use a lens hood to reduce flare and ensure maximum image
quality.
For the customers in the U.S.A.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
Align the lens hood with the tip of the lens and rotate it clockwise.
• When using a built-in camera flash, make sure to remove the lens hood to avoid blockage of the
flash light.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
• When storing, turn over the lens hood and place it onto the lens backwards.
CAUTION
Focusing
This lens is a manual-focus lens.
You are cautioned that any changes or modifications not expressly approved
in this manual could void your authority to operate this equipment.
1
Select manual-focus mode on your camera.
• Refer to the camera manual for details.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
• This lens can be used in manual-focus mode, even if your camera is set to autofocus mode.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
2
Turn the focusing ring until the image appears sharp.
• The focus signal found in the viewfinder does not work.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
|