Sony CD Player CDP CX571 User Manual

3-858-848-11 (2)  
Operating Instructions  
f
CDP-CX50  
CDP-CX571  
1997 by Sony Corporation  
 
– Reorient or relocate the receiving  
antenna.  
This equipment is intended for home  
entertainment purposes only. The  
warranty shall be invalidated if used  
in commercial environments, such as  
by disc jockeys, etc., even within the  
Warranty Period.  
WARNING  
– Increase the separation between the  
equipment and receiver.  
To prevent fire or shock  
hazard, do not expose  
the unit to rain or  
– Connect the equipment into an outlet  
on a circuit different from that to  
which the receiver is connected.  
– Consult the dealer or an experienced  
radio/ TV technician for help.  
moisture.  
To avoid electrical shock,  
do not open the cabinet.  
Refer servicing to  
Welcome!  
CAUTION  
You are cautioned that any changes or  
modification not expressly approved in  
this manual could void your authority to  
operate this equipment.  
Thank you for purchasing the Sony  
Compact Disc Player. Before operating  
the unit, please read this manual  
thoroughly and retain it for future  
reference.  
qualified personnel only.  
For the customers in the United States  
Owners Record  
The model and serial numbers are  
located at the rear of the unit.  
Record the serial number in the space  
provided below. Refer to them whenever  
you call upon your Sony dealer  
regarding this product.  
About This Manual  
The instructions in this manual are for  
models CDP-CX50 and CDP-CX571.  
Model No. _________________________  
Serial No. _________________________  
This symbol is intended to alert  
the user to the presence of  
Conventions  
Instructions in this manual describe  
the controls on the player.  
The following icon is used in this  
manual:  
uninsulated “dangerous voltage”  
within the products enclosure  
that may be of sufficient  
For the customers in Canada  
CAUTION  
magnitude to constitute a risk of  
electric shock to persons.  
TO PREVENT ELECTRIC SHOCK,  
DO NOT USE THIS POLARIZED AC  
PLUG WITH AN EXTENSION  
CORD, RECEPTACLE OR OTHER  
OUTLET UNLESS THE BLADES  
CAN BE FULLY INSERTED TO  
PREVENT BLADE EXPOSURE.  
Indicates hints and tips for  
making the task easier.  
This symbol is intended to alert  
the user to the presence of  
important operating and  
maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
(Except for the customers in the  
United States and Canada)  
The following caution label is located  
inside the unit.  
INFORMATION  
This equipment has been tested and  
found to comply with the limits for a  
Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are  
designed to provide reasonable  
protection against harmful interference  
in a residential installation. This  
equipment generates, uses, and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or  
This appliance is classified as a CLASS 1  
LASER product.  
The CLASS 1 LASER PRODUCT  
MARKING is located on the rear  
exterior.  
television reception, which can be  
determined by turning the equipment off  
and on, the user is encouraged to try to  
correct the interference by one or more of  
the following measures:  
2
 
TABLE OF CONTENTS  
Getting Started  
Unpacking ............................................................................................................................ 4  
Hooking Up the System ..................................................................................................... 4  
Inserting CDs ....................................................................................................................... 5  
Playing a CD ............................................................................................................................ 8  
Playing CDs  
Locating a Specific Disc .................................................................................................. 10  
Specifying the Next Disc to Play ................................................................................... 10  
Locating a Specific Track or a Point in a Track ............................................................ 10  
Playing Repeatedly ........................................................................................................... 11  
Playing in Random Order (Shuffle Play) ...................................................................... 11  
Creating Your Own Program (Program Play).............................................................. 12  
Playing Your Favorite Disc Independently (Plus One Play) ...................................... 14  
Additional Information  
Precautions ........................................................................................................................ 15  
Notes on CDs ..................................................................................................................... 15  
Troubleshooting ................................................................................................................ 16  
Specifications ..................................................................................................................... 16  
Index.......................................................................................................................................... 17  
3
 
Ge t t in g St a rt e d  
Unpacking  
Hooking Up the System  
Check that you received the following items:  
• Audio cord (1)  
• CD booklet holder (1)  
Overview  
This section describes how to hook up the CD player to  
an amplifier. Be sure to turn off the power of each  
component before making the connections.  
How to use the CD booklet holder  
The CD booklet holder helps you locate the disc easily.  
After you have inserted discs into the player, you can put  
the CD booklet (which comes with a CD) into the  
supplied holder.  
CD player  
To an AC outlet  
To line output (R)  
To line output (L)  
To audio input  
Amplifier  
: Signal flow  
To an AC outlet  
What cords will I need?  
Audio cord (1) (supplied)  
White  
(L)  
White  
(L)  
Red  
(R)  
Red  
(R)  
4
 
Ge t t in g St a rt e d  
Hookups  
Inserting CDs  
When connecting the audio cord, be sure to match the  
color-coded cord to the appropriate jacks on the  
components: Red (right) to Red and White (left) to  
White. Be sure to make connections firmly to avoid  
hum and noise.  
You can insert up to 51 discs into this player.  
Front cover  
POWER  
JOG  
CD player  
Amplifier  
LINE  
OUT  
INPUT  
CD  
L
L
R
R
Setting the voltage selector (voltage  
selector equipped models only)  
Playing position  
Rotary table  
Check that the voltage selector on the rear panel of the  
player is set to the local power line voltage. If not, set  
the selector to the correct position using a screwdriver  
before connecting the AC power cord to a wall outlet.  
Loading position  
110 - 120 V  
220 - 240 V  
1
2
Press POWER to turn on the player.  
Open the front cover by pushing the right edge of  
the cover.  
Connecting the AC power cord  
Connect the AC power cord to a wall outlet.  
Note on placement  
Front cover  
Be sure to place the player on a horizontal place.  
If the player is slanted, it may cause malfunction or  
damage the player.  
(Continued)  
5
 
Ge t t in g St a rt e d  
3
Turn the JOG dial until you find the disc slot  
where you want to insert a disc, while checking the  
disc number (written beside every slot and also  
indicated in the display).  
5
6
Repeat Steps 3 and 4 to insert more discs.  
Close the front cover by pushing the right edge of  
the cover until it clicks.  
Disc number  
Disc slot at the loading position  
The rotary table turns and the disc slot at the  
loading position is set to the playing position.  
Always close the front cover except when you  
insert or remove discs.  
The disc number at the loading position appears in  
the display.* As you turn the JOG dial, the disc  
number changes.  
ALL DISCS  
1
2
3
4
5
6
7
8
d1SC  
2 0  
The supplied CD booklet holder helps you locate a  
disc  
You can store up to 100 CD booklets.  
Disc number  
You can play the disc you want independently by  
using the Plus One function. When using this  
function, insert the disc into the PLUS ONE slot.  
For details, see “Playing Your Favorite Disc  
Independently” on page 14.  
Notes  
Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It  
may damage the player.  
Do not attach anything such as seals or sleeves to CDs. It may  
damage the player or the disc.  
If you drop a disc into the player and the CD wont go into  
the slot correctly, consult your nearest Sony dealer.  
When transporting the player, remove all discs from the  
player.  
* If you have already inserted discs, the disc number at  
the playing position appears. When you turn the JOG  
dial, the displayed disc number changes to the one at  
the loading position.  
4
Insert a disc with the label side facing right.  
Notes  
Make sure you have inserted the disc into each slot at  
a right angle to the rotary table. If the disc is not put  
in straight, it may damage the player or the disc.  
Make sure the rotary table comes to a complete stop  
before inserting or removing discs.  
With the label  
side facing right  
6
 
Ge t t in g St a rt e d  
Removing CDs  
After following Steps 1 to 3 of “Inserting CDs” on  
pages 5 – 6, remove the discs. Then close the front  
cover.  
Note  
The disc being played does not come to the loading position if  
you open the front cover during playback. (The disc number  
flashes in the display.)  
If you want to remove the disc being played, push the JOG  
dial after opening the front cover. The disc comes to the  
loading position. Remove the disc after the rotary table comes  
to a complete stop.  
7
 
Ba sic Op e ra t io n s  
Pla yin g a CD  
2
3 4/5  
PUSH OPEN  
DISC  
POWER  
PUSH ENTER  
CONTNUE  
SHUFFLE  
PROGRAM  
REPEAT  
CHECK  
CLEAR  
PLUS ONE  
See pages 4 – 5 for the hookup  
Turn on the amplifier and select the CD player position.  
Press POWER to turn on the player.  
information.  
1
Make sure you have inserted the  
discs correctly as indicated on  
page 5.  
2
You can play all the tracks on a  
disc in the original order  
Press CONTINUE to select ALL DISCS or 1 DISC Continuous  
Play mode.  
Each time you press CONTINUE, “ALL DISCS” or “1 DISC”  
appears in the display.  
(Continuous Play). You can also  
play up to 51 discs  
consecutively.  
3
When you select  
The player plays  
ALL DISCS  
All discs in the player consecutively in the order of  
disc number. Empty disc slots are skipped.  
1 DISC  
Only one disc you have selected  
Turn the JOG dial until the disc number you want appears in  
the display to select the first disc (ALL DISCS) or the disc you  
want (1 DISC).  
4
ALL DISCS  
1
2
3
4
5
6
7
8
d1SC  
2 0  
8
 
Ba sic Op e ra t io n s  
Push the JOG dial to start playing.  
The selected disc is set to the playing position, and the player  
plays all the discs from the selected one (ALL DISCS) or all the  
tracks once (1 DISC).  
5
Adjust the volume on the amplifier.  
Display information w hile playing a disc  
While playing a disc, the display shows the current disc number, track  
number, playing time of the track and the next disc number.  
Next disc number  
Current disc number  
ALL DISCS  
1
2
3
4
5
6
7
8
DISC  
TRACK  
NEXTDISC  
MIN  
SEC  
20 1  
0 28 38  
Current track number  
Playing time of the track  
To stop playback  
Press p.  
Front cover  
JOG  
·
PUSH OPEN  
DISC  
POWER  
PUSH ENTER  
CONTINUE  
SHUFFLE  
PROGRAM  
REPEAT  
CHECK  
CLEAR  
PLUS ONE  
P p  
≠0/)±  
To  
You need to  
Press P  
Pause  
Resume playing after pause  
Go to the next track  
Press P or ·  
Press )±  
Press ≠0  
Go back to the preceding track  
Stop playing and remove the disc  
Open the front cover, then push the JOG  
dial. The disc comes to the loading  
position.  
9
 
Pla yin g CDs  
Locating a Specific Disc  
Locating a Specific Track or a  
Point in a Track  
JOG  
You can quickly locate any track while playing a disc  
using the ≠0/)± (AMS: Automatic Music  
Sensor) buttons. You can also locate a specific point in  
a track while playing a disc.  
Turn the JOG dial until the disc number you want  
appears in the display. Push the JOG dial to start play.  
≠0/)±  
Specifying the Next Disc to  
Play  
To locate  
Press  
the next or  
succeeding tracks  
repeatedly until you find the  
track  
You can specify the next disc to play while playing a  
disc in Continuous or 1 DISC Shuffle Play mode.  
the current or  
preceding tracks  
≠0 repeatedly until you find the  
track  
a point in a track  
while monitoring the (backward) and hold down until you  
sound  
(forward) or ≠0  
While playing a disc, turn the JOG dial until the disc  
number you want appears in the display.  
find the point  
Next disc number  
a point in a track  
(forward) or ≠0  
quickly by observing (backward) and hold down until you  
ALL DISCS  
1
2
3
4
5
6
7
8
the display  
find the point during pause. You will  
not hear the sound during the  
operation.  
DISC  
TRACK  
NEXTDISC  
MIN  
SEC  
20 1  
0 28 38  
After the current disc is played, the next disc you have  
specified starts playing.  
If you want to skip to the next disc right away, push  
the JOG dial while playing the current disc.  
Note  
If “  
” appears in the display, the disc has reached the end  
while you were pressing . Press ≠0 to go back.  
To cancel the disc you have specified  
Press CONTINUE twice.  
10  
 
Pla yin g CDs  
Playing Repeatedly  
Playing in Random Order  
(Shuffle Play)  
You can play discs/ tracks repeatedly in any play  
mode.  
You can have the player “shuffle” the tracks and play  
in random order. The player shuffles all the tracks on  
all discs or on the disc you specified.  
REPEAT  
·
JOG  
SHUFFLE  
Press REPEAT while playing a disc.  
“REPEAT” appears in the display. The player repeats  
the discs/ tracks as follows:  
1
Press SHUFFLE to select ALL DISCS or 1 DISC  
Shuffle Play mode.  
Each time you press SHUFFLE, “ALL DISCS” or  
“1 DISC” appears in the display.  
When the disc is played in  
The player repeats  
ALL DISCS Continuous Play  
(page 8)  
All tracks on all discs  
1 DISC Continuous Play  
(page 8)  
All tracks on the current disc  
When you select  
The player plays  
ALL DISCS  
All tracks on all discs in  
random order. The player  
keeps shuffling tracks until  
you stop play.*  
ALL DISCS Shuffle Play  
(page 11)  
The player does not repeat  
discs/ tracks but keeps  
shuffling until you stop play  
whether or not you press  
REPEAT.  
1 DISC  
All tracks on the specific disc  
in random order  
1 DISC Shuffle Play  
(page 11)  
All tracks on the current disc  
in random order  
* The player may play the same track more than once.  
Program Play (page 12)  
The same program  
2
3
When you want to specify the disc for 1 DISC  
Shuffle Play, turn the JOG dial until the disc  
number you want appears in the display.  
To cancel Repeat Play  
Press REPEAT repeatedly until “REPEAT” disappears from  
Push the JOG dial or press ·.  
ALL DISCS or 1 DISC Shuffle Play starts.  
the display.  
” appears in the display while the player is  
“shuffling” the discs or the tracks.  
Repeating the current track  
You can repeat only the current track.  
While the track you want is being played, press  
REPEAT repeatedly until “REPEAT 1” appears in the  
display.  
11  
 
Pla yin g CDs  
To cancel Shuffle Play  
Press CONTINUE.  
Creating Your Own Program  
(Program Play)  
You can start Shuffle Play while playing  
Press SHUFFLE, and Shuffle Play starts from the current  
track.  
You can arrange the order of the tracks and/ or discs to  
create your own program and the program is stored  
automatically. A program can contain up to 32 “steps”  
— one “step” may contain a track or a whole disc.  
You can specify the next disc to play during 1 DISC  
Shuffle Play  
Turn the JOG dial to specify the next disc. After all the  
tracks on the current disc are played in random order,  
the next disc starts playing. If you want to skip to the  
next disc right away, push the JOG dial while playing the  
current disc.  
PROGRAM  
CHECK  
JOG  
Note  
You cannot specify the next disc to play during ALL DISCS  
Shuffle Play.  
·
≠0/)±  
CLEAR  
1
2
Press PROGRAM.  
If a program is already stored, the last step of the  
program appears in the display. When you want to  
erase the whole program, hold down CLEAR until  
“All Clr” appears in the display (see page 13).  
Turn the JOG dial until the disc number you want  
appears in the display.  
1
2
3
4
5
6
7
8
DISC  
TRACK  
STEP  
20 AL  
1
PROGRAM  
Disc number  
3
To program a whole disc, skip this step. Press  
≠0/)± until the track number you want  
appears in the display.  
1
2
3
4
5
6
7
8
DISC  
TRACK  
STEP  
20 1  
1
PROGRAM  
Track number  
12  
 
Pla yin g CDs  
4
Push the JOG dial or press PROGRAM.  
Changing the programmed order  
You can change your program before you start playing.  
The track being programmed  
1
2
3
4
5
6
7
8
To  
You need to  
DISC  
TRACK  
STEP  
20 1  
1
Erase a track or disc  
Press CHECK until the track or  
disc you do not want appears in  
the display, then press CLEAR  
PROGRAM  
Playing order  
The disc being  
programmed  
Erase the last track or  
disc in the program  
Press CLEAR. Each time you  
press the button, the last track or  
disc will be cleared.  
5
6
To program other discs/ tracks, do the following:  
Add tracks or discs to the Follow the programming  
Repeat Steps  
2 and 4  
To program  
end of the program  
procedure  
Other discs  
Change the whole  
Hold down CLEAR until  
Other tracks on the same disc  
Other tracks on other discs  
3 and 4  
program completely  
“All Clr” appears in the display to  
erase the whole program, then  
create a new program following  
the programming procedure  
2 to 4  
Press · to start Program Play.  
Erasing the program stored in memory  
To cancel Program Play  
Press CONTINUE.  
1
Press PROGRAM in the stop mode.  
The program remains even after Program Play ends  
When you press ·, you can play the same program  
again.  
2
Hold down CLEAR until ”All Clr” appears in the  
display.  
When you press PROGRAM during Continuous or  
Shuffle Play  
The program will be played after the current track.  
The program remains until you erase them  
If you replace discs, the programmed disc and track  
numbers remain. So, the player plays only the existing  
disc and track numbers.  
Checking the programmed order  
You can check your program before or after you start  
playing.  
Press CHECK.  
Each time you press this button, the display shows the  
disc and track number of each step in the programmed  
order. (When a whole disc is programmed as one step,  
“AL” appears instead of the track number.) After the  
last step in the program, the display shows “End” and  
returns to the original display.  
13  
 
Pla yin g CDs  
3
4
Insert a disc into the PLUS ONE slot.  
Playing Your Favorite Disc  
Independently (Plus One Play)  
Close the front cover.  
“P1” appears in the display instead of the disc  
number, and the player starts playing the disc in  
the PLUS ONE slot.  
When you insert a disc into the PLUS ONE slot, you  
can play the disc independently from other discs.  
When using this function, the player is automatically  
set to 1 DISC Continuous Play mode.  
1
2
3
4
5
6
7
8
DISC  
TRACK  
MIN  
SEC  
P1 1  
0 35  
Front cover  
To cancel Plus One Play  
Press PLUS ONE. The indicator on the PLUS ONE button  
goes off. The disc number in the display changes to 51 and  
you can play the disc as the 51st disc.  
If you have already inserted a disc into the PLUS ONE  
slot  
Press PLUS ONE while the front cover is closed. Plus  
PLUS ONE  
One Play starts immediately.  
1
2
Open the front cover.  
You can select Shuffle Play mode during Plus One  
Play  
Press SHUFFLE before Step 4 above.  
Press PLUS ONE.  
The indicator on the PLUS ONE button lights up.  
1
2
3
4
5
6
7
8
Notes  
Plus One Play will be canceled if you turn the JOG dial or  
d1SC PL US  
1
press buttons to specify the other disc.  
Plus One Play will be canceled if you press the PROGRAM  
button.  
The PLUS ONE slot comes to the loading position.  
The PLUS ONE slot comes to the loading position  
automatically if you open the front cover during Plus One  
Play. Do not put your hand inside the compartment nor  
change the disc before the rotary table comes to a complete  
stop. If you do, you may injure your hand or damage the  
disc.  
PLUS ONE slot  
14  
 
Ad d it io n a l In fo rm a t io n  
On transportation  
When transporting the player, open the front cover then  
Precautions  
remove all the discs from the player and turn the power off.  
On safety  
If you have any questions or problems concerning your  
player, please consult your nearest Sony dealer.  
Caution — The use of optical instruments with this product  
will increase eye hazard.  
Should any solid object or liquid fall into the cabinet,  
unplug the player and have it checked by qualified  
personnel before operating it any further.  
Notes on CDs  
On power sources  
On handling CDs  
Before operating the player, check that the operating  
voltage of the player is identical with your local power  
supply. The operating voltage is indicated on the nameplate  
at the rear of the player.  
To keep the disc clean, handle the disc carefully.  
Do not stick paper or tape on the disc.  
The player is not disconnected from the AC power source  
(mains) as long as it is connected to the wall outlet, even if  
the player itself has been turned off.  
If you are not going to use the player for a long time, be  
sure to disconnect the player from the wall outlet. To  
disconnect the AC power cord (mains lead), grasp the plug  
itself; never pull the cord.  
Not this w ay  
Do not expose the disc to direct sunlight or heat sources  
such as hot air ducts, nor leave it in a car parked in direct  
sunlight as there can be considerable rise in temperature  
inside the car.  
AC power cord must be changed only at the qualified  
service shop.  
On placement  
After removing a disc from the disc slot, store the disc in its  
case.  
Place the player in a location with adequate ventilation to  
prevent heat build-up in the player.  
Do not place the player on a soft surface such as a rug that  
might block the ventilation holes on the bottom.  
Do not place the player in a location near heat sources, or in  
a place subject to direct sunlight, excessive dust or  
mechanical shock.  
On cleaning  
Before playing, clean the disc with a cleaning cloth. Wipe  
the disc from the center out.  
On operation  
If the player is brought directly from a cold to a warm  
location, or is placed in a very damp room, moisture may  
condense on the lenses inside the player. Should this occur,  
the player may not operate properly. In this case, leave the  
player turned on for about an hour until the moisture  
evaporates.  
Do not use solvents such as benzine, thinner, commercially  
available cleaners or anti-static spray intended for vinyl  
LPs.  
On adjusting volume  
Do not turn up the volume while listening to a portion with  
very low level inputs or no audio signals. If you do, the  
speakers may be damaged when a peak level portion is  
played.  
On cleaning  
Clean the cabinet, panel and controls with a soft cloth  
slightly moistened with a mild detergent solution. Do not  
use any type of abrasive pad, scouring powder or solvent  
such as alcohol or benzine.  
15  
 
Ad d it io n a l In fo rm a t io n  
Troubleshooting  
Specifications  
If you experience any of the following difficulties while  
using the player, use this troubleshooting guide to help  
you remedy the problem. Should any problem persist,  
consult your nearest Sony dealer.  
Compact disc player  
Laser  
Semiconductor laser (λ = 780 nm)  
Emission duration: continuous  
Laser output  
Max 44.6 µW*  
* This output is the value measured at  
a distance of 200 mm from the  
objective lens surface on the Optical  
Pick-up block with 7 mm aperture.  
There is no sound.  
/Check that the player is connected securely.  
/Make sure you operate the amplifier correctly.  
Frequency response  
Signal-to-noise ratio  
Dynamic range  
2 Hz to 20 kHz ± 1 dB  
More than 100 dB  
More than 88 dB  
Less than 0.013 %  
More than 95 dB  
The CD does not play.  
/There is no CD in a slot (“–no dISC–” appears).  
Insert a CD.  
/Insert the CD with the label side facing right.  
/Clean the CD (see page 15).  
/Moisture has condensed inside the player. Open  
the front cover and leave the player turned on  
for about an hour (see page 15).  
Harmonic distortion  
Channel separation  
Output  
Jack  
type  
Maximum  
output  
level  
Load impedance  
The player functions incorrectly.  
/The microcomputer chips may be operating  
incorrectly. Disconnect the AC power cord, then  
connect it back to the wall outlet to reset the  
player.  
Phono  
jacks  
2 V  
Over 10 kilohms  
LINE OUT  
(at 50 kilohms)  
General  
Power requirements  
Where purchased  
Power requirements  
USA/Canada  
120 V AC, 60 Hz  
Australia (CDP-CX50 only)  
UK  
240 V AC, 50 Hz  
220 V – 230 V AC, 50/ 60 Hz  
Australia/Singapore  
(CDP-CX571 only)  
110 V –120 V or 220 V – 240 V  
AC, adjustable, 50/ 60 Hz  
Other countries  
110 V –120 V or 220 V – 240 V  
AC, adjustable, 50/ 60 Hz  
Power consumption  
12 W  
Dimensions (approx.)  
(w/h/d)  
When the front cover is closed  
430 × 182.5 × 295 mm (17 × 7 1/ 4  
× 11 5/ 8 in.) incl. projecting parts  
When the front cover is open  
430 × 182.5 × 414 mm (17 × 7 1/ 4  
× 16 3/ 8 in.) incl. projecting parts  
Mass (approx.)  
5.0 kg (11 lbs 4 oz)  
Supplied accessories  
Audio cord (2 phono plugs – 2 phono plugs) (1)  
CD booklet holder (1)  
Design and specifications are subject to change without notice.  
16  
 
In d e x  
Names of controls  
S
T
Index  
Searching. See Locating  
Selecting a disc 10  
Shuffle Play  
on all discs 11  
on one disc 11  
Bu t t o n s  
CHECK 13  
CLEAR 13  
A, B  
AMS 10  
Automatic Music Sensor 10  
CONTINUE  
8
Specifying the next disc 10  
PLUS ONE 14  
PROGRAM 12  
REPEAT 11  
SHUFFLE 11  
≠0/)± 10  
C, D  
Troubleshooting 16  
Connecting  
Continuous Play  
4
8
U, V, W, X, Y, Z  
·
9
P
9
9
Unpacking  
4
E, F, G  
p
Erasing  
programs 13  
Sw it ch e s  
POWER  
5
H
I
Handling CDs 15  
Hookups  
overview  
Ja cks  
LINE OUT  
5
4
Ot h e rs  
Disc slots  
Display  
6
Inserting CDs  
5
9
Front cover  
JOG dial 5, 8  
Rotary table  
5
J, K  
JOG dial 5, 8  
5
L, M, N, O  
Locating  
a specific track 10  
a specific point 10  
by monitoring 10  
by observing the display 10  
discs 10  
using AMS 10  
P, Q  
Playback  
Continuous Play  
8
Program Play 12  
Repeat Play 11  
Shuffle Play 11  
Plus One Play 14  
Program  
changing 13  
checking 13  
erasing 13  
R
Repeating 11  
Rotary table  
5
17  
 
 
 

Sony Computer Monitor CPD E200E User Manual
Sony DVD Player MEX DV2200 User Manual
Sony MP3 Docking Station RDPM5IPBLK User Manual
Sony Photo Printer 306 User Manual
Southbend Electric Steamer STRE 3D User Manual
Specialized Bicycle Sirrus Ltd Expert User Manual
StarTechcom Computer Drive IDE1810U2Z User Manual
Stearns Safety Survival Boating Equipment 429 07 User Manual
Sterling Thermostat S 8310 User Manual
Stiga Lawn Mower 25 E User Manual