Silvercrest Clock Radio SKRD 30 A1 User Manual

6
Under-Cabinet Radio SKRD 30 A1  
Under-Cabinet Radio  
Operating instructions  
KOMPERNASS GMBH  
BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: SKRD 30 A1-09/10-V3  
 
Index  
GB  
IE  
Programming the kitchen timer . . . .16  
Accessing the kitchen timer . . . . . .16  
Programming alarm wake times . . .17  
Wake with alarm tone . . . . . . . . . .17  
Waken with radio. . . . . . . . . . . . . .18  
Switching the alarm off. . . . . . . . . .18  
When the wake time has arrived . .18  
Radio operation . . . . . . . . . . . . . . .19  
Switching the radio on/off . . . . . . .19  
Adjusting the volume. . . . . . . . . . . .19  
Manual station selection. . . . . . . . .19  
Search for the next station . . . . . . .19  
Saving stations manually . . . . . . . .20  
Access saved stations . . . . . . . . . .20  
Automatic station search  
(AMS function) . . . . . . . . . . . . . . .20  
Additional functions . . . . . . . . . . . .21  
Automatic switch off (Sleep function) 21  
Button lock . . . . . . . . . . . . . . . . . . .21  
Bass accentuation. . . . . . . . . . . . . .21  
Introduction . . . . . . . . . . . . . . 2  
Information for these operating  
instructions . . . . . . . . . . . . . . . . . . . . 2  
Copyright . . . . . . . . . . . . . . . . . . . . . 2  
Proper usage . . . . . . . . . . . . . . . . . . 2  
Warning notices . . . . . . . . . . . . . . . . 3  
Safety . . . . . . . . . . . . . . . . . . . . . . . . 4  
Danger from electric shock. . . . . . . . 4  
Handling of batteries . . . . . . . . . . . . 4  
Basic Safety Instructions . . . . . . . . . . 5  
Operating components . . . . . 6  
Setting up and connecting . . . 7  
Safety instructions . . . . . . . . . . . . . . 7  
Package contents and transport  
inspection . . . . . . . . . . . . . . . . . . . . . 7  
Unpacking . . . . . . . . . . . . . . . . . . . . 7  
Disposal of the packaging . . . . . . . . 8  
Set-up location requirements. . . . . . . 8  
Electrical connection. . . . . . . . . . . . . 8  
Inserting the battery . . . . . . . . . . . . . 9  
Mounting under a wall cupboard . . 9  
Disassembly . . . . . . . . . . . . . . . . . .10  
Setting up the device . . . . . . . . . . .10  
Providing mains power . . . . . . . . . .10  
VHF wire antenna . . . . . . . . . . . . .10  
Cleaning . . . . . . . . . . . . . . . .22  
Safety instructions . . . . . . . . . . . . .22  
Cleaning the housing . . . . . . . . . . .22  
Troubleshooting . . . . . . . . . .22  
Safety instructions . . . . . . . . . . . . .22  
Malfunction causes and remedies .23  
Handling and operation . . .11  
Storage/Disposal . . . . . . . . .24  
Switching On and Off . . . . . . . . . .11  
Basic settings . . . . . . . . . . . . . . . . .11  
Activating the settings menu . . . . .11  
Setting the time. . . . . . . . . . . . . . . .12  
Setting the date . . . . . . . . . . . . . . .12  
Adjusting the display brightness. . .13  
Setting the memory function . . . . . .13  
Setting the time of day format . . . .14  
Kitchen timer. . . . . . . . . . . . . . . . . .14  
Setting the kitchen timer . . . . . . . . .14  
Starting the kitchen timer . . . . . . . .15  
Pausing the kitchen timer. . . . . . . . .15  
Storage. . . . . . . . . . . . . . . . . . . . . .24  
Disposal of the device . . . . . . . . . .24  
Disposing of the batteries. . . . . . . .24  
Appendix . . . . . . . . . . . . . . .25  
Information regarding the  
EG conformity declaration . . . . . . .25  
Technical data . . . . . . . . . . . . . . . .25  
Warranty . . . . . . . . . . . . . . . . . . . .26  
Service . . . . . . . . . . . . . . . . . . . . . .26  
Importer . . . . . . . . . . . . . . . . . . . . .26  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
Introduction  
GB  
IE  
Information for these operating instructions  
These operating instructions are a component of the Under-Cabinet Radio  
SKRD 30 A1 (henceforth designated as the device) and they provide you with  
important information about the intended use, safety, installation and connection  
as well as operation of the device.  
The operating instructions must be kept available in the vicinity of the device  
at all times. They are to be read and used by anyone assigned to service and  
repair faults in the device.  
Retain these operating instructions and pass them on with the device to any  
future owners.  
Copyright  
This documentation is copyright protected.  
Any copying or reproduction, including as extracts, as well as the reproduction  
of images, also in an altered state, is not permitted without the express written  
consent of the manufacturer.  
Proper usage  
This device is only intended for the reception of VHF radio programmes, as a  
kitchen timer and as an alarm by means of an alarm tone or radio in enclosed  
spaces. The device is intended as a free standing unit or for mounting under a  
cupboard. For these purposes the supplied stand and/or mounting plate must be  
used. Any other use or uses beyond those mentioned are considered unintended  
use. The device is not intended for use in commercial or industrial environments.  
WARNING  
Danger from unintended use!  
Danger from the device can result if it is used for unintended purposes and/or  
other types of use.  
Use the device exclusively for intended purposes.  
Observe the procedures described in these operating instructions.  
No warranty claims of any kind will be accepted for damage caused by improper  
use, unauthorised repairs, unauthorised modifications or for the use of unapproved  
replacement parts.  
The operator alone bears liability.  
SKRD 30 A1  
2
 
Introduction  
Warning notices  
GB  
IE  
In the current operating instructions the following warning notices are used:  
DANGER  
A warning in this danger level indicates a hazard threatening  
situation.  
In the event that the hazardous situation is not avoided it can lead to death  
or serious injury.  
The directives in this warning are there in order to avoid the danger of  
death or serious injury.  
WARNING  
A warning of this danger level signifies a possible dangerous  
situation.  
If the dangerous situation is not avoided it can lead to injuries.  
The directives in this warning are there to avoid personal injuries.  
IMPORTANT  
A warning of this danger level signifies possible property  
damage.  
If the situation is not avoided it can lead to property damage.  
The directives in this warning are there to avoid property damage.  
NOTICE  
A notice signifies additional information that assists in the handling of the  
device.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
3
Introduction  
Safety  
GB  
IE  
In this section you receive important safety information regarding handling of the  
device.  
This device complies with the statutory safety regulations. Incorrect usage can  
lead to injuries and property damage.  
Danger from electric shock  
DANGER  
Risk of fatal electrocution!  
A life-threatening situation can arise from contact with live  
wires or components!  
Observe the following safety instructions to avoid electric shock hazards:  
Do not use the device if the mains power plug or the connection cable are  
damaged.  
Do not, under any circumstances, open the device housing. The risk of an  
electric shock is present if the power carrying connections are touched or  
the electrical or mechanical construction is changed.  
Handling of batteries  
WARNING  
Danger from improper use!  
For safe handling of batteries observe the following safety instructions:  
Do not throw batteries into a fire.  
Do not short circuit batteries.  
Do not attempt to recharge batteries.  
Regularly check the condition of the batteries. Leaking battery acid can  
cause permanent damage to the device. Special caution should be shown  
when handling damaged or leaking batteries. Danger from acid burns!  
Wear protective gloves.  
Store batteries in a place inaccessible to children. If swallowed seek  
immediate medical attention.  
If you do not intend to use the device for an extended period of time,  
remove the batteries.  
SKRD 30 A1  
4
 
Introduction  
Basic Safety Instructions  
GB  
IE  
For safe handling of the device observe the following safety instructions:  
Before use check the device for visible external damage. Do not put into  
operation a device that is damaged or has been dropped.  
Damaged cables or connections should be replaced by authorised qualified  
persons or by the customer service department.  
Persons who, due to their physical, intellectual or motor abilities, are incapable  
of operating the device safely may only use the device under supervision or  
direction from a responsible person.  
Only allow children to use the device under supervision.  
Repairs should only be carried out by authorized specialist companies or by  
the customer service department. Incorrect repairs can result in danger to the  
user. In addition warranty claims become void.  
A repair to the device during the warranty period may only be carried out  
by a customer service department authorized by the manufacturer otherwise  
no additional warranty claims can be considered for subsequent damages.  
Defective components may only be replaced with original replacement parts.  
Only by using original replacement parts can you guarantee that the safety  
requirements are complied with.  
Protect the device from moisture and liquid penetration. Never submerge the  
device in water, do not place the device in the vicinity of water and do not  
stand any object filled with liquid (i.e. vases) on the device.  
Do not place any objects on the device.  
Do not operate the device in the vicinity of open flames (i.e. candles).  
Avoid direct sunlight.  
Always pull on the power plug when disconnecting from the wall socket,  
never pull on the connection cable.  
If malfunctions occur or thunder storms threaten pull the power plug from the  
wall socket.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
5
Operating components  
Operating components  
GB  
IE  
(for illustrations see fold out sides figure A)  
Mounting plate/Stand  
2
Control panel  
3
Display  
4
5
On/Off: On/Off switch (Radio)  
AOT: Timer switch off  
6
Lock/Mem.: Button lock/memory slot selection  
Bass/AMS/Mode: Bass accentuation/Station search/Access setting menu  
Alarm 1: Alarm 1 programming  
7
8
9
Alarm 2: Alarm 2 programming  
10  
11  
12  
Preset–: selection of the previous memory slot  
Preset+: selection of the next memory slot  
Tune–: Decrease the reception frequency  
13 Tune+: Increase the reception frequency  
14 VOLUME/Snooze/Timer: Volume control/Alarm switch off/Timer setting  
15 Wire antenna for VHF reception  
16 Mains connection cable  
17 Recesses for stand  
18 Speakers  
19 Battery compartment  
20 Unlocking buttons for the mounting plate  
SKRD 30 A1  
6
 
Setting up and connecting  
Setting up and connecting  
GB  
IE  
Safety instructions  
WARNING  
Damage may occur to property and injuries to people when  
operating the device!  
Observe the following safety instructions to avoid dangers:  
Packaging material should not be used as a play thing. There is a risk of  
suffocation!  
To avoid risks to persons and property, observe the requirements for the  
set-up location and the electrical connections.  
Package contents and transport inspection  
The device is delivered with the following components as standard:  
Under-Cabinet Radio SKRD 30 A1  
Mounting plate/Stand  
4 Securing screws  
1 x Battery 3 V Type CR2032  
Operating instructions  
NOTICE  
Check the contents to make sure everything is there and for visible damage.  
If the items supplied are incomplete, or damaged due to defective packaging  
or transportation, contact the Service Hotline (see section Service).  
Unpacking  
Remove all device parts and the operating instructions from the carton.  
Remove all packing material.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
7
Setting up and connecting  
Disposal of the packaging  
GB  
IE  
The packaging protects the device from transport damage. The packaging ma-  
terials are selected from the point of view of their environmental friendliness and  
disposal technology and are therefore recyclable.  
The recirculation of packaging into the material circuit saves on raw material  
and reduces generated waste. Dispose of packaging material that is no longer  
needed according to the regionally established regulations.  
NOTICE  
If possible preserve the device's original packaging during the warranty  
period so that in the case of a warranty claim you can package the device  
properly for return.  
Set-up location requirements  
For the safe and fault free operation of the device, the set-up location must fulfill  
the following conditions:  
When setting up the device place it on a firm, flat and even surface. Use the  
supplied stand.  
Set up or mount the device in such a way that the available ventilation open-  
ings and the speaker are not covered.  
Do not operate the device in a hot, wet or very humid location or in the vicin-  
ity of flammable materials.  
The surfaces of furniture may contain components that could affect and sof-  
ten the rubber feet on the device. If necessary, place an anti-slip mat under  
the rubber feet of the device.  
The wall socket must be easily accessible so that, in an emergency, the plug  
can be quickly withdrawn from the socket.  
Electrical connection  
Before connecting the device, compare the connection data (voltage and  
frequency) on the rating plate of the device with that of your power supply  
network. This data must be compatible to avoid possible damage to the device.  
Make sure that the device's connection cable is not damaged and is not  
laying over hot surfaces and/or sharp edges.  
Make sure that the connection cable is not tightly stretched or bent.  
Do not allow the connection cord to hang over edges (Trip wire effect).  
SKRD 30 A1  
8
 
Setting up and connecting  
Inserting the battery  
GB  
IE  
By inserting the battery you can avoid the loss of programmed time of day and  
alarm times in the event of a possible power outage. The battery ensures that  
the internal clock continues to run even during a power failure. When power is  
3
restored the correct time appears automatically in the display  
.
NOTICE  
The device can also be operated without a battery.  
Open the cover of the battery compartment 19 on the underside of the  
device by turning the cover to the left, with a coin, as far as it will go and  
then lift off.  
Insert the battery type CR2032 (supplied) into the battery compartment.  
The side with the marking + points upwards.  
Close the battery compartment by attaching the cover and then with a coin  
turn it to the right.  
Mounting under a wall cupboard  
(Illustration see fold out side figure B)  
With the supplied mounting plate  
you can mount the device under, for exam-  
ple, a wall cupboard. For mounting of the device proceed as follows:  
Press both unlocking buttons 20 on the rear panel of the device downwards  
thereby, at the same time, sliding the mounting plate backwards and  
remove the mounting plate  
.
Find a suitable set-up location for the device (see also the section  
Requirements for the set-up location).  
Hold the mounting plate  
edge of the mounting plate  
under the set-up location. Thereby the front  
should be approx. 4 cm behind the front of  
the cupboard so that, after Remove the mounting, the device is flush with the  
cupboard.  
Mark the 4 fastening points with a pencil.  
Using a spike or nail, make a small depression at the respective marking  
points. Screw the mounting plate  
illustrated in figure B.  
tightly with the supplied screws as  
Place the device aslant, with the front recesses in the top face, in the mount-  
ing plate . Press the rear part of the device upwards against the mounting  
plate  
until the device audibly locks into place.  
Check to make sure that the device is secure.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
9
Setting up and connecting  
Disassembly  
GB  
IE  
Press both unlocking buttons 20 on the rear panel of the device downwards,  
thereby sliding, at the same time, the device forward and then remove the  
device downwards.  
Unscrew the screws on the mounting plate  
plate  
and remove the mounting  
.
Setting up the device  
As an alternative you can stand the device on a top. So as not to cover up the  
ventilation slots and the speaker 18 on the underside of the device, when setting  
up the device it must be mounted on the stand . For assembly of the stand  
proceed as follows:  
Press both unlocking buttons 20 on the rear panel of the device downwards  
thereby, at the same time, sliding the mounting plate backwards and remove  
the mounting plate . The mounting plate can now be used as a stand.  
Slide both front retaining tabs of the stand  
the underside of the device.  
into the rear recesses 17 on  
Press both rear retaining tabs of the stand  
the underside of the device until the stand audibly locks into place.  
into the front recesses 17 on  
Find a suitable set-up location for the device (see also the section  
Requirements for the set-up location).  
Providing mains power  
Insert the mains connection cable 16 power plug into a socket. The time of  
3
day will be shown in the display  
(0:00 o'clock).  
VHF wire antenna  
Unwind the wire antenna 15 completely for VHF reception.  
SKRD 30 A1  
10  
 
Handling and operation  
Handling and operation  
GB  
IE  
In this section you receive important information for the handling and operation  
of the device.  
Switching On and Off  
After the device has been connected to the power supply it is already switched  
4
on. Via the On/Off  
button you switch between the operational modes clock/  
standby operation and radio.  
NOTICE  
4
The On/Off switch  
does not disconnect the device completely from the  
mains power. To completely disconnect the device from the mains power  
the mains power cable plug 16 must be pulled from the mains socket.  
Basic settings  
After the device has been connected to the mains power supply it shows the time  
3
of day and the day of the week in the display . The device is in the operational  
mode clock/standby operation.  
Activating the settings menu  
To activate the settings menu, whilst in the operational mode clock/standby operation,  
3
7
press the Bass/AMS/Mode  
button. The time of day, shown in the display  
,
7
begins to blink. Each further actuation of the Bass/AMS/Mode  
to the next setting potential. The menu item sequence is:  
button switches  
Setting the time of day  
Setting the date  
Adjusting the display brightness  
Setting the memory function  
Setting the time of day format  
NOTICE  
The setting menu ends automatically if you do not actuate any buttons for  
approx. 15 seconds. The executed setting is saved.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
11  
Handling and operation  
Setting the time  
GB  
IE  
Prerequisite: The device is in the operational mode clock/standby operation.  
7
Press the Bass/AMS/Mode  
begins to blink.  
button once. The time of day indicator  
12  
Set with the buttons Tune+ 13 and Tune–  
the current time of day. With  
each button press the time of day changes by one minute. Holding down  
the respective button for more than 2 seconds starts the speed setting.  
7
Press the Bass/AMS/Mode  
move to the next menu item.  
button again to save the current setting and  
NOTICE  
The time of day will revert back to 00:00 o'clock if the device is disconnected  
from the mains power supply and no battery is inserted or if the battery is too  
weak.  
Setting the date  
Prerequisite: The device is in the operational mode clock/standby operation.  
7
Press the Bass/AMS/Mode  
blink.  
button twice. The date indicator begins to  
12  
Set with the buttons Tune+ 13 and Tune–  
the current date. With each  
button press the date is changed by one day. The weekday indicator changes  
automatically. Holding down the respective button for more than 2 seconds  
starts the speed setting.  
7
Press the Bass/AMS/Mode  
move to the next menu item.  
button again to save the current setting and  
NOTICE  
The date will revert back to 01.01.2010: if the device is disconnected from  
the mains power supply and no battery is inserted or if the battery is too weak.  
SKRD 30 A1  
12  
 
Handling and operation  
Adjusting the display brightness  
GB  
IE  
Prerequisite: The device is in the operational mode clock/standby operation.  
7
Press the Bass/AMS/Mode  
button three times. The current setting for the  
display brightness is shown (H=bright or L=dim).  
Set, with the button Tune+ 13, the display brightness to Hif you want the  
display to be brighter.  
12  
Set, with the button Tune– , the display brightness to Lif you want the  
display to be darker.  
7
Press the Bass/AMS/Mode  
move to the next menu item.  
button again to save the current setting and  
Setting the memory function  
You can set up to 10 date reminders to which an automatic reminder will be  
triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for  
example, of birthdays or other recurring events. The reminder occurs every year  
on the same date.  
Prerequisite: The device is in the operational mode clock/standby operation.  
7
Press the Bass/AMS/Mode  
button four times. The current setting of the  
selected reminder date is shown alternating with the indicator SDA. Next to  
the indicator SDAis the number of the memory slot for that date. Possible  
reminders are SDA 0 to SDA 0.  
11  
10  
Select with the buttons Preset+  
date to be set.  
and Preset–  
the memory slot for the  
12  
Set with the buttons Tune+ 13 and Tune–  
the date for this memory slot.  
With each button press the date is changed by one day. Holding down the  
respective button for more than 2 seconds starts the speed setting.  
NOTICE  
Press the button AOT 5 if you want to switch off the reminder function  
for the currently selected memory slot. In the display ----is shown.  
6
Press the button Lock/Mem.  
function is to be triggered. The setting is carried out with the buttons Tune+ 13  
12  
to set the time of day at which the reminder  
and Tune–  
on the hour between 00 and 23. This setting applies to all  
programmed reminder dates  
7
Press the Bass/AMS/Mode  
move to the next menu item.  
button again to save the current setting and  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
13  
Handling and operation  
Setting the time of day format  
GB  
IE  
Prerequisite: The device is in the operational mode clock/standby operation.  
7
Press the Bass/AMS/Mode  
button five times. The current setting for the  
time of day format is shown (24=24 hour format or 12=12 hour format).  
With the button Tune+ 13 set the time of day format to 24if you want a  
time of day display in the 24 hour format .  
12  
With the button Tune–  
set the time of day format to 12if you want a  
time of day display in the 12 hour format .  
7
Press the Bass/AMS/Mode  
move to the next menu item.  
button again to save the current setting and  
Kitchen timer  
The device has a convenient kitchen timer with which, for example, cooking and  
baking times can be monitored. The programmable time range of the kitchen  
timer lies between 1 minute and 23 hours, 59 minutes.  
Setting the kitchen timer  
:
Press the Snooze/Timer 14 button. The display shows 0000. In the right  
upper corner of the display the saucepan symbol for the kitchen timer is  
superimposed.  
Turn the VOLUME 14 knob to set the time range for the kitchen timer.  
Turning in a clockwise direction increases the time; turning in a counter  
clockwise direction reduces the time.  
NOTICE  
If, during the setting, approx. 15 seconds passes without any changes  
taking place the device reverts back to the previous operational mode.  
SKRD 30 A1  
14  
 
Handling and operation  
Starting the kitchen timer  
GB  
IE  
After setting the time press the button Snooze/Timer 14 again. The displayed  
time begins to run backwards. In the right, upper corner of the display a  
backwards running clock is superimposed.  
NOTICE  
If, during the operation of the kitchen timer, another function is selected  
the display of the remaining time fades out. The saucepan symbol and the  
backward running clock in the right, upper corner of the display, however,  
continue to be shown. Press the button Snooze/Timer 14 again to allow  
the remaining time of the kitchen timer to be shown once more.  
30 seconds before the kitchen timer run time has expired the device begins to  
acoustically indicate, with individual signal tones, the arrival of the set time. Thereby  
the interval between the individual tones becomes shorter and shorter. When the  
set time has arrived the kitchen timer's alarm signal sounds as a continuous tone.  
Press the button Snooze/Timer 14 to switch off the kitchen timer alarm signal.  
Pausing the kitchen timer.  
Press, while the kitchen timer is running, the button Snooze/Timer 14. The  
kitchen timer is paused. The displayed remaining time begins to blink.  
NOTICE  
After approx. 15 seconds the device reverts back to the previous operational  
mode. Press the button Snooze/Timer 14 again to allow the remaining time  
of the kitchen timer to be shown once more.  
To restart the kitchen timer press the button Snooze/Timer 14 again. The  
kitchen timer restarts.  
To switch off the kitchen timer before the set time has expired press and hold  
down the Snooze/Timer 14 button for at least 2 seconds.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
15  
Handling and operation  
Programming the kitchen timer  
GB  
IE  
You can preprogramme the kitchen timer with the most frequently used times so  
that it is not necessary to continually reenter them. Up to 10 times can be prepro-  
grammed. All 10 memory slots are preprogrammed with 10 minutes as standard.  
For the programming of the kitchen timer proceed as follows:  
Press the button Snooze/Timer 14 to activate the kitchen timer.  
Turn the VOLUME 14 knob to set the time to be programmed. Turning in a  
clockwise direction increases the time; turning in a counter clockwise direc-  
tion reduces the time.  
6
Press the button Lock/Mem.  
to activate the timer selection. Under the  
kitchen timer saucepan symbol a blinking T is shown.  
11  
10  
a memory slot between  
Select with the buttons Preset+  
T0and T9for the timer that is to be set.  
and Preset–  
6
Press the button Lock/Mem.  
again to programme the set time on the  
selected memory slot. The blinking T under the saucepan symbol is now show-  
ing constantly.  
Repeat the process for the other memory slots.  
Accessing the kitchen timer  
To access a programmed time for the kitchen timer proceed as follows:  
Press the button Snooze/Timer 14 to activate the kitchen timer.  
11  
10  
the desired timer between  
Select with the buttons Preset+  
and Preset–  
T0and T9.  
Press the button Snooze/Timer 14 again to start the kitchen timer.  
SKRD 30 A1  
16  
 
Handling and operation  
Programming alarm wake times  
GB  
IE  
The device has two alarms available. All settings for both alarms can be carried  
out independently from each other. You can select whether at the programmed  
time an alarm tone shall sound or the radio shall play.  
NOTICE  
If, during alarm wake programming, no button is pressed for approx.  
15 seconds the alarm will activate with the current settings.  
Prerequisite: The device is in the operational mode clock/standby operation.  
To set the wake time proceed as follows:  
9
8
Press the Alarm1 button  
or the Alarm2 button . The set wake time  
3
of the respective alarm is shown blinking in the display  
and the indicator  
A1 and/or A2appears. The weekday on which this alarm is to be activated  
is shown above the time indicator.  
12  
the desired wake time. With  
each button press the wake time changes by one minute. Holding down the  
respective button for more than 2 seconds starts the speed setting.  
Set with the buttons Tune+ 13 and Tune–  
Press the button AOT 5 to switch between the weekday combinations Mo-Fr,  
Sa-Su or Mo-Su. The respective selected combination is shown above the  
wake time.  
Press and hold down the button AOT 5 for at least 2 seconds to switch  
between the weekday combinations and individual weekday setting alterna-  
tives.  
NOTICE  
With the individual weekday setting alternative you switch between  
the days of the week with the button AOT 5 .  
Wake with alarm tone  
Prerequisite: The device is in the operational mode clock/standby operation.  
8
3
To select "Alarm tone" for the respective alarm press the Alarm1 button  
9
or the Alarm2 button  
several times in succession until, in the display  
,
the symbol  
appears.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
17  
Handling and operation  
Waken with radio  
GB  
IE  
If you want to be woken by the radio, before activating the wake time carry out  
the following settings:  
4
Switch the radio on by pressing the On/Off  
button.  
Select the station with which you want to be woken (see section  
Station setting).  
With the VOLUME 14 knob set the desired volume (see section  
Volume settings).  
4
Switch the radio off by pressing the On/Off  
button.  
8
To select "Radio" for the respective alarm press the Alarm1 button  
or the  
3
9
Alarm2 button  
several times in succession until, in the display , the  
symbol  
appears.  
Switching the alarm off  
Prerequisite: The device is in the operational mode clock/standby operation.  
8
To switch off the respective alarm press the Alarm1 button  
or the Alarm2  
9
button  
several times in succession until no symbols are shown in the  
.
3
display  
When the wake time has arrived  
With the setting "Wake with alarm tone" a fourfold signal tone sounds in  
intervals of 2 seconds. The volume of the signal tone will continually increase  
until the maximum volume has been reached. The duration of the wake signal is  
restricted to 10 minutes.  
With the setting "Wake with radio" the radio will switch on. The previously  
selected station will be activated for a maximum of 60 minutes at the set volume.  
Press the button Snooze/Timer 14 to activate a repeat wake after 9 minutes.  
NOTICE  
The repeat wake function is possible up to 60 minutes after the set wake  
time has arrived.  
9
8
Press the Alarm1 button  
alarm.  
or the Alarm2 button  
to end the current  
NOTICE  
The alarm becomes active again when the next wake time has arrived  
(i.e. on the next day).  
SKRD 30 A1  
18  
 
Handling and operation  
Radio operation  
GB  
IE  
NOTICE  
For a good radio reception the wire antenna 15 must be completely un-  
coiled. Adjust the antenna, whilst in radio operation, to the best reception.  
The technical factors of the device allow for tuning reception frequencies  
outside of the permitted VHF (FM) range of 87.5–108 MHz. In some  
countries, different national regulations may apply to the assigned radio  
frequency ranges.  
Please note that information received outside of the assigned radio  
frequency ranges may not be exploited, passed on to third parties or  
otherwise misused.  
Switching the radio on/off  
3
4
Switch the radio on by pressing the On/Off  
button.The display  
shows the current reception frequency of the tuned station.  
4
Switch the radio off by pressing the On/Off  
button again.The device  
changes back to the operational mode clock/standby operation. The cur-  
rent time of day is shown.  
Adjusting the volume.  
With the VOLUME 14 knob set the desired volume. Turning in a clockwise  
direction increases the volume; turning in a counter clockwise direction  
reduces the volume. The volume level is shown on the left border of the  
3
display  
.
Manual station selection  
12  
By a single press on the buttons Tune+ 13 and Tune–  
tune the desired  
3
station. The frequency of the station is shown in the display . During the  
tuning the speaker is switched off.  
Search for the next station  
The device can automatically search for the nearest station.  
12  
for at least two seconds.  
Press and hold down the button Tune+ 13 or Tune-  
The device searches for the nearest station with sufficient reception quality.  
Repeat this process until you have found the station you are looking for.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
19  
Handling and operation  
Saving stations manually  
GB  
IE  
Prerequisite: The device is in the radio operational mode.  
The device has 30 memory slots available for station frequencies. To save a station  
frequency proceed as follows:  
Tune, as described previously, the desired station.  
6
Press the button Lock/Mem.  
once. The symbol MEM begins to blink in  
the lower, right corner of the display.  
11  
10  
the desired memory slot  
Select with the buttons Preset+  
and Preset–  
for the tuned station between 1and 30.  
6
Press the button Lock/Mem.  
again. The reception frequency of the tuned  
station is saved on the selected memory slot. The symbol MEM lights up  
constantly.  
Access saved stations  
Prerequisite: The device is in the radio operational mode.  
11  
10  
the desired memory slot  
Select with the buttons Preset+  
and Preset–  
for the saved station between 1and 30.  
Automatic station search (AMS function)  
Prerequisite: The device is in the radio operational mode.  
To allocate the memory slots to the station frequencies with the strongest receiv-  
able stations a station search can be carried out.  
NOTICE  
With the carrying out of the following described function all previously  
saved stations will be lost.  
7
Press and hold down the button Bass/AMS/Mode  
for at least two  
seconds. The device begins the station search and allocates to the memory  
slots 1-30 the found stations.  
NOTICE  
If more than 30 stations are found only the first 30 reception frequencies  
will be saved.  
If less than 30 stations are found the last memory slots remain unchanged.  
SKRD 30 A1  
20  
 
Handling and operation  
Additional functions  
GB  
IE  
Automatic switch off (Sleep function)  
With the sleep function the radio switches itself off after a time lapse of between  
5 and 120 minutes.  
To access the function press the button AOT 5 . The current remaining time  
until the radio switches itself off is shown.  
Press the button AOT 5 repeatedly to set the desired time. Holding down  
the button for more than 2 seconds starts the speed setting.  
NOTICE  
The setable time frame lasts from 120 to 5 minutes. The setting takes place  
in stages of 5 minutes. After which the indicator OFFappears. With the  
indicator OFF the sleep function is switched off.  
Button lock  
You can lock the buttons of the device so that settings cannot be altered by  
unauthorised people or children.  
6
Press and hold down the button Lock/Mem.  
switch the button lock on or off. When the button lock is switched on the  
symbol appears in the display.  
for at least two seconds to  
Bass accentuation  
With the bass accentuation you can switch on an enhanced playback of the low  
frequencies.  
Prerequisite: The device is in the radio operational mode.  
7
Press briefly the button Bass/AMS/Mode  
to switch the bass accentuation  
on or off. With the bass accentuation switched on the symbol BASS appears  
in the display.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
21  
Cleaning/Troubleshooting  
Cleaning  
GB  
IE  
Safety instructions  
DANGER  
Life-threatening situation from electric shock!  
Remove the plug from the mains power socket before cleaning.  
IMPORTANT  
Damaging of the device!  
Make sure when you are cleaning the device that no moisture gets inside  
in order to avoid irreparable damage to it.  
Cleaning the housing  
Clean the surfaces of the device with a soft, dry cloth.  
Troubleshooting  
In this section you receive important information for the localization and remedying  
of malfunctions. Observe the instructions in order to avoid danger and damage.  
Safety instructions  
WARNING  
Observe the following safety information to avoid danger and property  
damage:  
Repairs to electronic devices may only be carried out by specialists who  
have been trained by the manufacturer. Considerable danger to the con-  
sumer and damage to the device can occur as a result of incorrect repairs.  
SKRD 30 A1  
22  
 
Troubleshooting  
Malfunction causes and remedies  
GB  
IE  
The following table will help with localizing and remedying minor malfunctions:  
Defect  
Possible cause  
Solution  
Insert the plug into the  
mains power socket.  
The plug is not inserted.  
The display is  
showing nothing.  
Mains power socket is  
not supplying power.  
Check the circuit fuse.  
The volume is set to  
minimum.  
Increase the volume with the  
VOLUME 14 knob.  
No sound  
Switch the radio on with the  
The radio is switched off.  
4
On/Off  
button.  
The radio station is not  
properly tuned in.  
Tune the station correctly with the  
12  
buttons Tune+ 13 and Tune–  
.
Noisy radio  
reception  
Try to improve reception by moving  
the wire antenna 15.  
Reception is too weak.  
NOTICE  
If you cannot solve the problem with the aforementioned methods, please  
contact Customer Service.  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
23  
Storage/Disposal  
Storage/Disposal  
GB  
IE  
Storage  
If you do not intend to use the device for an extended period of time, disconnect  
it from the mains power supply, remove the battery and store it at a clean, dry  
location that is not subjected to direct sunlight.  
Disposal of the device  
Do not dispose of the device in your normal domestic waste.  
This product is subject to the European directive 2002/96/EC-WEEE  
(Waste Electrical and Electronic Equipment).  
Dispose of the device through an approved disposal centre or at your community  
waste facility. Observe the currently applicable regulations. In case of doubt,  
please contact your waste disposal centre.  
Disposing of the batteries  
Batteries must not be disposed of in the household waste. Every consumer is  
legally obligated to hand in batteries at a collection centre in his/her commu-  
nity/district or a dealer. This obligation is intended to ensure that batteries are  
disposed of in an environmentally friendly manner. Hand batteries in only when  
they are fully discharged.  
SKRD 30 A1  
24  
 
Appendix  
Appendix  
GB  
IE  
Information regarding the EG conformity declaration  
This device complies regarding conformance to the basic  
requirements and other relevant regulations of the European  
directive for electromagnetic compatibility 2004/108/EC,  
the low voltage directive 2006/95/EC as well as the Eco-  
design directive 2009/125/EC (Supplement 1275/2008  
Appendix II, Nr.1)  
The complete original declaration of conformity can be  
obtained from the importer.  
Technical data  
Operational voltage  
220-240 V / 50 Hz  
1 x 3 V Type CR2032  
(supplied)  
Battery for data retention  
Power consumption  
Operation  
approx. 5  
approx. 1.8  
approx. 1W  
W
W
Standby  
Speaker power output:  
(with 10 % harmonic distortion)  
Radio frequency range (VHF)  
Operating temperature  
87.5 - 108 MHz  
+5 - +40  
5 - 90  
°C  
%
Humidity (no condensation)  
Measurements (H x W x D):  
(without stand)  
4.9 x 22 x 12  
cm  
g
Weight  
approx. 600  
II  
Protection class  
SKRD 30 AD1ownload from Www.Somanuals.com. All Manuals Search And Download.  
25  
Appendix  
Warranty  
GB  
IE  
With this device you receive a 3 year warranty from the date of purchase. The  
device has been manufactured with care and meticulously examined before  
delivery.  
Please retain your receipt as proof of purchase. In the case of a warranty claim,  
please get in touch, by telephone, with our service department. Only in this way  
can a post-free dispatch for your goods be assured.  
NOTICE  
The warranty adjustment is valid only for material or manufacturing defects  
not, however, for transport damage, wear and tear or for damage to break-  
able parts, i.e. switches or rechargeable batteries.  
The device is intended solely for private, non-commercial use. If this product has  
been subjected to improper or inappropriate handling, abuse, or modifications  
not carried out by one of our authorised sales and service outlets, the warranty  
becomes void.  
Your statutory rights are not restricted in any way by this warranty. The warranty  
period will not be extended as a result of warranty adjustments. This applies also  
to replacement and repaired parts.  
Possible damage and/or faults present at the time of purchase must be reported  
immediately after unpacking or, at the very latest, within two days after the  
purchase date.  
After expiry of the warranty period incidental repairs are subject to payment.  
Service  
DES UK LTD  
Tel.: 0871 5000 700 (£ 0.10 / minute)  
Kompernass Service Ireland  
Tel: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may vary.  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
SKRD 30 A1  
26  
 

Sharp All in One Printer TINSE4796FCZZ User Manual
Sherwood Stereo Receiver RX 772 User Manual
Snapper Edger ET302B User Manual
Sony Camera Accessories FATC1AM User Manual
Sony DVD VCR Combo J H1 User Manual
Sony Headphones MRD IF240RK User Manual
Sony MP3 Player A AY7 100 111 User Manual
SPX Cooling Technologies Fan 03 11A User Manual
Sunbeam Mixer 2395 User Manual
Tandberg Data Network Card DLT4000 User Manual