Sharp Clock Radio DK CL3P User Manual

Thank you for purchasing this SHARP product.  
To obtain the best performance from this product, please read this manual  
carefully. It will guide you in operating your SHARP product.  
Nous vous remercions d’avoir porté votre choix sur ce produit SHARP.  
Pour en tirer le meilleur parti, veuillez lire ce mode d’emploi très attentivement.  
®
MUSIC SYSTEM FOR iPod  
®
& iPhone  
RY  
O
M
E
M
SYSTÈME MUSICAL POUR  
iPod et iPhone  
MODEL  
MODÈLE  
DK-CL3P  
Please refer to pages E-1 to E-21.  
ENGLISH  
Accessories / Accessoires  
Se reporter aux pages F-1 à F-21.  
FRANÇAIS  
Please confirm that only the following accessories are included.  
Vérifier que les accessoires ci-dessous sont présents dans l’emballage.  
OPERATION MANUAL  
MODE D’EMPLOI  
AC/DC adaptor x 1 / Adaptateur CA/CC x1  
92L88900013101  
iPhone adaptor 12  
iPhone adaptor 15  
iPhone adaptor 19  
Adaptateur iPhone 12  
Adaptateur iPhone 15 Adaptateur iPhone 19  
iPhone, iPod, iPod classic, iPod nano, and iPod  
touch are trademarks of Apple Inc., registered in  
the U.S. and other countries.  
iPhone, iPod, iPod classic, iPod nano et iPod touch  
92L43200033101  
92L43200033201  
92L43200033301  
sont des marques de commerce d’Apple Inc.,  
 
enregistrées aux É-U et aux autres pays.  
IMPORTANT SAFETY INSTRUCTIONS  
DK-CL3P  
ENGLISH  
Electricity is used to perform many useful functions, but it can  
also cause personal injuries and property damage if improperly  
handled. This product has been engineered and manufactured  
with the highest priority on safety. However, improper use can  
result in electric shock and/or fire. In order to prevent potential  
danger, please observe the following instructions when  
installing, operating and cleaning the product. To ensure your  
safety and prolong the service life of this product, please read  
the following precautions carefully before use.  
12) Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
Additional Safety Information  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
15) Power Sources - This product should be operated only from  
the type of power source indicated on the marking label. If  
you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For  
product intended to operate from battery power, or other  
sources, refer to the operating instructions.  
7) Do not block any ventilation openings. Install in accordance  
with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
16) Overloading - Do not overload wall outlets, extension cords,  
or integral convenience receptacles as this can result in a  
risk of fire or electric shock.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug  
does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
17) Object and Liquid Entry - Never push objects of any kind into  
this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
 
E-2  
IMPORTANT SAFETY INSTRUCTIONS (continued)  
DK-CL3P  
ENGLISH  
18) Damage Requiring Service - Unplug this product from the  
wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
22) Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be  
fatal.  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the  
product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following  
the operating instructions. Adjust only those controls  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its normal  
operation,  
23) Protective Attachment Plug - The product is equipped with  
an attachment plug having overload protection. This is a  
safety feature. See Instruction Manual for replacement or  
resetting of protective device. If replacement of the plug is  
required, be sure the service technician has used  
a
replacement plug specified by the manufacturer that has the  
same overload protection as the original plug.  
e) If the product has been dropped or damaged in any  
way, and  
24) Stand - Do not place the product on an unstable cart, stand,  
tripod or table. Placing the product on an unstable base can  
cause the product to fall, resulting in serious personal  
injuries as well as damage to the product. Use only a cart,  
stand, tripod, bracket or table recommended by the  
manufacturer or sold with the product. When mounting the  
product on a wall, be sure to follow the manufacturer's  
f ) When the product exhibits  
a
distinct change in  
performance - this indicates a need for service.  
19) Replacement Parts - When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same  
characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other  
hazards.  
instructions.  
Use  
only  
the  
mounting  
hardware  
recommended by the manufacturer.  
20) Safety Check - Upon completion of any service or repairs to  
this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating  
condition.  
21) Wall or ceiling mounting - When mounting the product on a  
wall or ceiling, be sure to install the product according to the  
method recommended by the manufacturer.  
 
E-3  
Contents  
SPECIAL NOTES  
DK-CL3P  
ENGLISH  
Page  
ENERGY STAR ® Program Information  
General Information  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Controls and indicators . . . . . . . . . . . . . . . . . . 6 - 7  
Products that have earned the  
®
Preparation for Use  
ENERGY STAR are designed  
to protect the environment  
through superior energy  
efficiency.  
System connections . . . . . . . . . . . . . . . . . . . . 8 - 9  
Basic Operation  
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Setting the time and date . . . . . . . . . . . . . . . . . . . 11  
ENERGY STAR® is a U.S. registered mark.  
iPod and iPhone  
Listening to the iPod and iPhone . . . . . . . . 12 - 14  
Radio  
Listening to the radio . . . . . . . . . . . . . . . . . . 14 - 15  
Advanced Features  
Alarm operation . . . . . . . . . . . . . . . . . . . . . . 16 - 17  
Enhancing your system . . . . . . . . . . . . . . . . 17 - 18  
References  
Troubleshooting chart . . . . . . . . . . . . . . . . . 18 - 19  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
CONSUMER LIMITED WARRANTY . . . . . . . 21 - 22  
 
E-4  
Precautions  
DK-CL3P  
ENGLISH  
General  
Hold the AC/DC adaptor by the  
head when removing it from the  
AC outlet, as pulling the cord  
can damage internal wires.  
Please ensure that the equipment is  
positioned in a well-ventilated area  
and ensure that there is at least  
4" (10 cm) of free space along the  
sides, top and back of the equipment.  
4" (10 cm)  
The AC/DC adaptor is used as  
a disconnect device and shall  
always remain readily  
operable.  
4" (10 cm)  
Use the unit on a firm, level surface  
free from vibration.  
Do not remove the outer cover, as this may result in  
electric shock. Refer internal service to your local  
SHARP service facility.  
RY  
MEMO  
This unit should only be used within the range of 41°F - 95°F  
(5°C - 35°C).  
To prevent fire or shock hazard, do not expose this appliance  
to dripping or splashing. No object filled with liquids, such as  
vases shall be placed on the apparatus.  
Keep the unit away from direct  
sunlight, strong magnetic  
fields, excessivedust, humidity  
and electronic/electrical  
equipment (home computers,  
facsimiles, etc.) which  
generate electrical noise.  
Warning:  
OR  
Y
MEM  
The voltage used must be the same as that specified on this  
unit. Using this product with a higher voltage other than that  
which is specified is dangerous and may result in a fire or other  
type of accident causing damage. SHARP will not be held  
responsible for any damage resulting from use of this unit with a  
voltage other than that which is specified.  
Do not place anything on top of the unit.  
Do not expose the unit to moisture, to temperatures higher  
than 140°F (60°C) or to extremely low temperatures.  
Volume control  
If your system does not work properly, disconnect the AC/DC  
adaptor from the AC outlet. Plug the AC/DC adaptor back in,  
and then turn on your system.  
The sound level at a given volume setting depends on speaker  
efficiency, location and various other factors. It is advisable to  
avoid exposure to high volume levels, which occurs while  
turning the unit on with the volume control setting up high, or  
while continually listening at high volumes.  
In case of an electrical storm,  
unplug the unit for safety.  
 
E-5  
Controls and indicators  
DK-CL3P  
ENGLISH  
Top panel  
1
Reference page  
1. iPod and iPhone Dock . . . . . . . . . . . . . . . . . . . . . . . 13  
2. DISPLAY (TV OUT)/ALARM Button . . . . . . . . . . . 8, 14  
3. ON/STAND-BY/Alarm Reset/  
FUNCTION Button . . . . . . . . . . . . 8, 10, 13, 14, 15, 18  
4. Snooze/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 10  
5. Previous/Next/Tuning Up/Down Button . . . 11, 14, 15  
6. Volume Up/Down Button . . . . . . . . . . . . . . . . . . . . . 10  
7. Clock/MEMORY/PLAY/PAUSE Button . . . . . . . . 11, 14  
5
6
2
3
7
MEMORY  
Display  
Reference page  
4
1. Day Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
2. Snooze Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
3. Alarm Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
4. Buzzer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
5. iPod/iPhone Indicator . . . . . . . . . . . . . . . . . . . . . . . . 16  
6. FM Tuner Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
1
SUN  
MON  
FM  
TUE  
WED  
THU  
FRI  
SAT  
PM  
MHz  
 
3
2
6
5
4
E-6  
Controls and indicators (continued)  
DK-CL3P  
ENGLISH  
OPEN  
1
1
2
3
4
Bottom view  
Rear panel  
Reference page  
Reference page  
1. Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . . 9  
1. AUDIO IN Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
2. FM Antenna Wire (fixed). . . . . . . . . . . . . . . . . . . . . . 15  
3. Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
4. DC Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
 
E-7  
System connection  
DK-CL3P  
ENGLISH  
Please make sure to set iPod unit to either NTSC or PAL to  
match your TV signal. Please visit Apple’s home page for  
further information.  
Make sure to unplug the AC/DC adaptor before making any connections.  
Connecting iPod or iPhone to TV  
Customer should also refer iPod operation manual before  
making video out setting.  
Video files from iPod or iPhone can be viewed by connecting the system to TV/  
monitor.  
AC/DC adaptor connection  
If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the back  
of the unit and set the TV Out on the iPod or iPhone unit to “ON” position.  
1
Plug the AC/DC adaptor cable into the DC IN jack on  
the unit.  
Video cable  
(not supplied)  
VIDEO OUT  
2
Plug the AC/DC adaptor into an AC outlet.  
TV  
1
AC/DC Adaptor Cable  
2
To video input jack  
DC IN Jack  
(DC 6V)  
Watching videos on a TV connected to iPod  
1
Press the FUNCTION button on the main unit to select  
the iPod function.  
2
Enter the iPod or iPhone menu.  
Press and hold DISPLAY(TV OUT) button on main unit  
until ON appear on display.  
AC Outlet  
(AC 100 - 240 V, 50/60 Hz)  
3
4
Select the desired video to be played.  
Press the ENTER button on the iPod unit to start playback.  
For iPod touch and iPhone, playback will automatically  
start once the desired file is selected.  
Notes:  
Unplug the AC/DC adaptor from the AC outlet if the unit will  
not be used for a prolonged period of time.  
Use only the supplied AC/DC adaptor. Using other AC/DC  
Notes:  
adaptor may cause an electric shock or fire.  
To return to watch video on iPod or iPhone screen, return to  
the iPod menu. Press and hold the DISPLAY(TV OUT) on  
main unit until “OFF” appear on display.  
During unit operational with batteries, iPod/iPhone attached  
can be used for playback only.  
During iPod video playback, pressing the DISPLAY(TV OUT)  
button until “OFF” appear on display will not toggle video out  
display between iPod and TV.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
 
E-8  
System connections (continued)  
DK-CL3P  
ENGLISH  
Note:  
Install/Replace backup batteries  
Battery life may vary depending on the temperature, battery  
types and usage conditions.  
Use 4 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).  
Batteries are not included.  
Precautions for battery use:  
Installing the batteries incorrectly may cause the unit to  
malfunction.  
1
Open the battery cover.  
Insert the batteries according to the direction indicated in the  
2 Insert the batteries according to the direction  
battery compartment.  
indicated in the battery compartment.  
Replace all old batteries with new ones at the same time.  
Do not mix old and new batteries.  
When inserting or removing the batteries, push them  
towards the  
battery terminal.  
Batteries (battery pack or batteries installed) shall not be  
exposed to excessive heat such as sunshine, fire or the like.  
3 Close the cover.  
Caution:  
Do not use rechargeable batteries (nickeI-cadmium battery, etc.).  
Notes:  
Backup battery system is use to provide continuous alarm  
operation and clock setting in event of a power failure. During  
battery replacement, please make sure the AC/DC adaptor is  
connected, otherwise all setting may be lost.  
Remove the batteries if the unit will not be used for a long  
period of time to prevent battery leakage which may cause  
potential damage.  
The first time the batteries is install, the clock will blinking on  
the display. Please set the time and date (refer page 11).  
 
E-9  
General control  
DK-CL3P  
ENGLISH  
Display brightness control (DIMMER)  
Press the SNOOZE/DIMMER button to adjust the brightness of  
LCD display.  
Dimmer 1  
Dimmer 2  
(Display is dim)  
(Display gets dimmer)  
Dimmer off (Display is bright)  
Notes:  
Setting dimmer to display in the brightest mode during battery  
operation will affect battery life.  
MEMORY  
During battery operation in standby mode, the brightness of  
the display will automatically go to the lowest mode (dim OFF)  
after 5 seconds.  
Volume auto set in  
If you turn off and on the main unit with the volume set to 17 or  
higher, the volume starts at 16.  
Volume control  
MON  
Press the VOLUME (+ or –) button  
to increase or decrease the volume.  
Volume indicator will be blinking  
when volume reaches maximum  
and minimum level.  
To turn the power on  
Press the ON/STAND-BY button to turn the power on.  
The first time power is supplied to the unit, the clock will be  
blinking on the display. Please set the time and date  
(refer page 11).  
After use:  
Press and hold the ON/STAND-BY button to enter the power  
stand-by mode.  
 
E-10  
Setting the time and date  
DK-CL3P  
ENGLISH  
2
Press the  
or  
button to adjust the hour and  
then press the CLOCK button.  
MON  
Press the  
or  
button once to advance the time by  
1 hour. Hold it down to advance continuously.  
“AM” or “PM” indicator will interchange after each 12 hour  
cyclic in 12-H clock format.  
3
4
Press the  
or  
button to adjust the minutes and  
then press the CLOCK button.  
MON  
MEMORY  
Press the  
or  
button once to advance the time by  
1 minute. Hold it down for about 2 seconds to change the  
time in 5-minutes interval.  
Press the  
press the CLOCK button.  
or  
button to adjust the day and then  
MEMORY  
MON  
THU  
In this example, the clock is set for the 12-H (12 hour) display.  
1
In standby mode, press the CLOCK button for more  
than 2 seconds. The clock time display will blinking.  
“:” will be blinking to indicate time and date setting is  
completed.  
MON  
MON  
Note:  
During battery operations in standby mode, press the SNOOZE/  
DIMMER button to display the clock for about 5 seconds.  
Press the  
or  
button to select clock time display  
format and then press CLOCK button.  
 
E-11  
Listening to the iPod and iPhone  
iPod and iPhone operations  
Made for:  
iPhone 4  
DK-CL3P  
ENGLISH  
iPod and iPhone adaptor connection  
Note:  
You can use an audio cable to connect your iPod or iPhone to  
the AUDIO IN socket if:  
iPhone 3GS  
iPhone 3G  
iPhone  
iPod touch (3 generation)  
iPod touch (2 generation)  
1. your iPod or iPhone adaptor does not fit into the dock on the  
main unit.  
rd  
nd  
2. you have an iPod or iPhone that does not have an iPod or  
iPhone adaptor.  
st  
iPod touch (1 generation)  
iPod classic  
3. you have an iPod that does not have an iPod 30 pin  
connector.  
iPod with video  
th  
iPod nano (5 generation)  
th  
iPod nano (4 generation)  
rd  
iPhone  
iPod nano (3 generation)  
iPhone Description  
Capacity  
nd  
Adaptor No.  
iPod nano (2 generation)  
st  
12  
15  
15  
19  
iPhone  
4GB & 8GB & 16GB  
8GB & 16GB  
16GB & 32GB  
16GB & 32GB  
iPod nano (1 generation)  
iPod with colour display  
iPod mini  
iPhone 3G  
iPhone 3GS  
iPhone 4  
Caution:  
Please update your iPod and iPhone unit to the latest  
software version before using it. Please visit Apple’s  
homepage to download the latest version for your iPod and  
iPhone.  
Notes:  
Once the iPod or iPhone is connected to the unit it will begin  
charging.  
If you have an iPod or iPhone that does not have an iPod 30  
Pin connector, you can use an auxillary cable to connect it  
to the AUDIO IN jack.  
The message “This accessory is not made to work with  
iPhone” or similar, may appear on the iPhone screen when:  
-
-
battery is low.  
the iPhone is not properly docked (eg. slanting).  
If this occurs, remove and re-dock the iPhone.  
The iPod or iPhone will not be charged while the main unit  
uses batteries as power supply.  
 
E-12  
Listening to the iPod and iPhone (continued)  
DK-CL3P  
ENGLISH  
To insert iPod or iPhone adaptor  
iPod or iPhone playback  
1. Insert the iPod or iPhone adaptor into unit and connect your  
iPod or iPhone.  
1
Press the ON/STAND-BY button to turn the power on.  
2
Press the FUNCTION button on main unit to select the  
iPod function.  
iPhone (bottom)  
iPhone  
3
Insert iPod or iPhone unit in the dock of main unit.  
iPhone  
Dock connector  
iPhone adaptor  
iPhone dock  
iPhone connector  
4
Press the  
playback.  
/
button on the iPod unit to start  
For iPod touch and iPhone, playback will automatically  
start once the desired file is selected.  
Caution:  
Unplug all accessories for the iPod or iPhone before inserting it  
into the dock.  
To disconnect iPod or iPhone  
To remove iPod or  
iPhone adaptor  
Simply remove the iPod or iPhone from the dock. It is safe to do  
so even during playback.  
Insert the tip of a screwdriver (“-”  
type, small) into the adaptor hole  
as shown and lift upward to remove.  
 
E-13  
Listening to the radio  
DK-CL3P  
ENGLISH  
Various iPod or iPhone functions  
Function  
Play  
Main unit  
Operation  
Press in the pause mode.  
MEMORY  
MEMORY  
Pause  
Press in the playback mode.  
Track  
up/  
down  
Press in the playback or pause  
mode.  
If you press the button in the  
pause mode, press the  
/
button to start the desired track.  
Fast  
forward/  
reverse  
Press and hold down in the  
playback mode.  
Release the button to resume  
playback.  
MEMORY  
TV OUT  
Press for more than 2 seconds  
to toggle the video out display  
between iPod or iPhone and TV.  
iPod and iPhone operation  
The operations described above depend on the generation iPod  
or iPhone you are using.  
Tuning  
1
Press the ON/STAND-BY button to turn the power on.  
2
Press the FUNCTION button to select the Tuner  
function.  
 
E-14  
Listening to the radio (continued)  
DK-CL3P  
ENGLISH  
3
Tune to the desired station.  
Manual tuning:  
Press the TUNING (  
or  
) button as many times as  
MHz  
MHz  
FM  
FM  
required to tune in to the desired station.  
Auto tuning:  
3
4
5
Within  
5
seconds, press the MEMORY button  
When the TUNING ( or ) button is pressed for more  
than 0.5 seconds, scanning will start automatically and the  
tuner will stop at the first receivable broadcast station.  
repeatedly to select the preset channel number.  
Store the stations in memory, in order, starting with preset  
channel 1.  
Notes:  
After 5 seconds the tuner  
frequency will change to time  
display. To preview the tuner  
frequency, press DISPLAY(TV  
OUT) button.  
When radio interference occurs,  
auto scan tuning may stop  
automatically at that point.  
Auto scan tuning will skip weak signal stations.  
To stop the auto tuning, press the TUNING ( or ) button  
again.  
Within 5 seconds, press and hold the MEMORY button  
on main unit to store that station in memory.  
MHz  
FM  
If the preset number indicators disappear before the  
station is programmed, repeat the operation from step 2.  
FM TUNER  
indicator  
Repeat steps 1 - 4 to set other stations, or to change a  
preset station.  
When a new station is stored in memory, the station  
previously programmed for that preset channel number will  
be erased.  
Receiving an FM stereo transmission:  
If the FM reception is weak, the reception will auto changes  
to monaural, and the sound becomes clearer.  
Note:  
The backup batteries function protects the programmed stations  
Programming a station  
You can store 20 FM stations in memory and recall them at the  
push of a button. (Preset tuning)  
should there be a power failure or the AC/DC adaptor becomes  
disconnected. If the backup batteries are drain off, the  
programmed stations will be erased.  
To recall a programmed station  
1
2
Perform steps 1 - 3 in “Tuning” on pages 14 - 15.  
Press MEMORY button repeatedly to select the desired  
programmed station.  
While the Tuner frequency is display, press the  
MEMORY button for more than 2 seconds on the main  
unit to enter the preset tuning saving mode.  
 
E-15  
Alarm operation  
DK-CL3P  
ENGLISH  
Alarm  
3
4
Press the  
or  
button to adjust the minutes and then  
The unit turns on and play desired source (iPod, iPhone or  
press the ALARM button.  
TUNER) or Buzzer sound for 1 hour alarm cycle.  
SUN  
MON  
TUE  
WED  
THU  
FRI  
SAT  
Before setting the alarm:  
1 Check that the clock is set to the correct time. (refer page 11)  
If it is not set, you cannot use the alarm function.  
2 For iPod playback: Insert iPod or iPhone to the unit. (refer  
page 13)  
Press the  
or  
button once to advance the time by  
1 minute. Hold it down to change the time in 5 minutes interval.  
3 For TUNER: Set preset memory. (refer page 15)  
Press the or button to select the day for the alarm  
and then press alarm button.  
SUN  
MON  
TUE  
WED  
THU  
FRI  
SAT  
Setting the alarms  
1
In standby mode, press and hold the ALARM button until the  
alarm time and alarm icon blinking.  
Everyday: MON - SUN (Alarm activate daily)  
Weekday: MON - FRI (Alarm activate from Monday to Friday  
only)  
Weekend: SAT - SUN (Alarm activate from Saturday to  
Sunday only)  
SUN  
MON  
TUE  
WED  
THU  
FRI  
SAT  
5
Press the  
or  
button to select the wake up  
source and then press the ALARM button.  
2
Press the  
or  
button to adjust the hour and press the  
MON  
TUE  
WED  
THU  
FRI  
ALARM button.  
SUN  
MON  
TUE  
WED  
THU  
FRI  
SAT  
Wake up source selection:  
BUZZER RADIO  
iPod  
Press the  
or  
button once to advance the time by  
1 hour. Hold it down to advance continuously. AM” or “PM”  
indicator will interchange after each 12 hour cyclic.  
Alarm icon “ ” will light up to indicate alarm setting is complete.  
 
E-16  
Alarm operation (continued)  
Enhancing your system  
DK-CL3P  
ENGLISH  
The auxiliary cable is not included. Purchase  
auxiliary cable as shown below.  
a
separate  
Note:  
If wake up source is set to iPod, and iPod is not present, the  
alarm source will change to default Buzzer.  
Portable audio player  
Activate and deactivate the alarm  
1
During standby mode, press ALARM button to  
deactivate current alarm times and wake up source.  
2
Press ALARM button again to reactivate the last alarm  
function. When the alarm setting time is activated,  
alarm information will shown for 5 seconds and alarm  
icon ( ) will appear on display.  
Computer  
SUN  
MON  
TUE  
WED  
THU  
FRI  
SAT  
To the line  
output jack  
3
When alarm has started, alarm icon ( ) will blinking on  
the display.  
Daily Alarm:  
During alarm is function, press ALARM RESET button to stop  
alarm and it will come again on the next day.  
Auxiliary cable  
(not supplied)  
Sure Alarm:  
When power failure, the alarm will function if the backup  
batteries are installed.  
Snooze function  
Once alarm has started, pressing the SNOOZE/DIMMER  
button will stop alarm for 9 minutes.  
During snooze,  
icon will light up and  
icon will blinking.  
Once the snooze time has expired, alarm will continue.  
 
E-17  
The snooze function can be operated during 1 hour alarm cycle.  
Troubleshooting chart  
Many potential problems can be resolved by the owner without  
calling a service technician.  
If something is wrong with this product, check the following  
before calling your authorized SHARP dealer or service center.  
DK-CL3P  
ENGLISH  
Listening to the audio/video sounds from  
portable audio player, computer etc.  
1 Use the auxiliary cable to connect the portable audio  
General  
Symptom  
player, computer etc. to the AUDIO IN jack.  
Possible cause  
When using video equipment, connect the audio output to  
this unit and the video output to a television.  
The clock is not set to the Did a power failure occur?  
correct time.  
Reset the clock. (Refer to  
page 11)  
2 Press the ON/STAND-BY button to turn the power on.  
3 Press the FUNCTION button to select AUX function.  
4 Play the connected equipment.  
When a button is  
pressed, the unit does  
not respond.  
Set the unit to the power  
stand-by mode and then turn  
it back on.  
If the unit still malfunctions,  
reset it.  
(Refer to page 19)  
Note:  
To prevent noise interference, place the unit away from the  
television and do not make any auxilary playback while listening  
to the iPod or iPhone.  
No sound is heard.  
Is the volume level set to “0”?  
Tuner  
Symptom  
Possible cause  
The radio makes unusual Is the unit placed near the  
noises continuously.  
TV or computer?  
Is the FM antenna placed  
properly? Move the antenna  
away from the AC/DC  
adaptor if it is located  
nearby.  
 
E-18  
Troubleshooting chart (continued)  
DK-CL3P  
ENGLISH  
iPod and iPhone  
Symptom  
Condensation  
Sudden temperature changes, storage or operation in an  
extremely humid environment may cause condensation inside  
the cabinet or on the transmitter on the remote control.  
Condensation can cause the unit to malfunction. If this happens,  
leave the power on until normal playback is possible (about 1  
hour). Wipe off any condensation on the transmitter with a soft  
cloth before operating the unit.  
Possible cause  
No sound is produced. The iPod or iPhone unit  
No image appears on  
the TV/monitor.  
software version is not update  
to the latest version. Please  
visit Apple’s homepage.  
The iPod or iPhone is not  
playing.  
The iPod or iPhone is not  
If problem occurs  
properly connected to the unit.  
When this product is subjected to strong external interference  
(mechanical shock, excessive static electricity, abnormal supply  
voltage due to lightning, etc.) or if it is operated incorrectly, it may  
malfunction.  
Is the AC/DC adaptor of the  
unit plugged in?  
The video cable is not properly  
connected.  
The TV/monitor’s input  
selection is not properly set.  
If such a problem occurs, do the following:  
1
Set the unit to the stand-by mode and turn the power on again.  
2
If the unit is not restored in the previous operation, unplug and  
plug in the unit, and then turn the power on.  
iPod or iPhone will not The iPod or iPhone is not  
charge.  
making full contact with the  
connector.  
Note:  
Is the AC/DC adaptor of the  
If neither operation above restores the unit, remove the backup  
unit plugged in?  
batteries.  
rd  
Using iPod (3 generation).  
Clearing all the memory (reset)  
The main unit is using  
batteries as power supply.  
During standby mode, press and hold SNOOZE button for  
5
seconds. Display will become blank for awhile and main unit will  
reset.  
The iPod or iPhone is not  
compatible. Refer page 12 for  
compatible models.  
Caution:  
This operation will erase all data stored in memory including  
“This accessory is not The iPhone battery is low.  
clock, alarm settings and tuner preset.  
made to work with  
iPhone” or similar  
appears on iPhone  
screen.  
Please charge the iPhone.  
iPhone not properly docked.  
Before transporting the unit  
Remove the iPod or iPhone from the unit. Then, set the unit to  
the power standby mode. Carrying the unit with iPod or iPhone  
left docked might damage both systems.  
 
E-19  
Maintenance  
DK-CL3P  
ENGLISH  
Caution:  
Cleaning the unit  
Do not use chemicals for cleaning (gasoline, paint thinner,  
etc.). It may damage the unit finishing.  
Periodically wipe the unit with a clean soft cloth.  
Do not apply oil to the inside of the unit. It may cause  
malfunctions.  
Specifications  
As part of our policy of continuous improvement, SHARP  
reserves the right to make design and specification changes for  
product improvement without prior notice. The performance  
specification figures indicated are nominal values of production  
units. There may be some deviations from these values in  
individual units.  
Speaker  
1-way type speaker system  
2.5" (6.5 cm) Full Range  
Speaker maximum 1.2 W/Channel  
input power  
Speaker rated  
input power  
0.6 W/Channel  
General  
Power source  
DC IN 5.9V  
2A: AC/DC adaptor  
Output terminals  
Video output: 1Vp-p  
(AC 100 - 240 V ~ 50/60 Hz)  
6V  
(UM-3/SUM-3, R6/AA) x 4  
Input terminals  
Auxiliary (audio signal):  
500 mV/47 k ohms  
Power  
consumption  
11 W  
Dimensions  
Width: 4" (100 mm)  
Height: 33/4" (96.2 mm)  
Depth: 45/14" (110 mm)  
Output power  
Front speakers:  
0.6 W watts minimum RMS per channel  
into 8 ohms from 100 Hz to 20 kHz, 10%  
total harmonic distortion.  
Weight  
0.77 lbs. (0.35 kg)  
Tuner  
Frequency range  
FM: 87.5 - 108.0 MHz  
 
E-20  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product), when ship in its original container,  
will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a  
new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has  
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in  
design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING  
.
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW  
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any  
warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.  
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the  
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event  
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone  
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states  
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
DK-CL3P MUSIC SYSTEM for iPod & iPhone  
Your Product Model Number & Description:  
(Be sure to have this information available when you need service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.  
Where to Obtain Service:  
At a Sharp Authorized Servicer located in the United States.  
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship your Product prepaid to a Sharp Authorized Servicer  
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and  
packaged securely.  
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495 - 1163  
 
E-21  
VALID IN CANADA ONLY  
LIMITED WARRANTY  
Consumer Electronics Products  
Congratulations on your purchase!  
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when  
shipped in its original container and sold or distributed in Canada by Sharp or by an Authorised Sharp Dealer:  
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in  
this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein.  
This warranty shall not apply to:  
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inap  
manual.  
s
s Authorised  
Servicing Dealers.  
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to head cleaning tapes and  
chemical cleaning agents.  
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to earphones,  
remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and paper.  
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.  
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage.  
(g) Any product received without appropriate model, serial number and CSA/cUL markings.  
(h) Any products used for rental or commercial purposes.  
(i) Any installation, setup and/or programming charges.  
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of  
purchase and a copy of this LIMITED WARRANTY statement to an Authorised Sharp Service Centre or an Authorised Sharp Servicing Dealer. In home warranty  
s discretion on any Sharp television with the screen size of 27” or larger and on any Sharp Over The Range Microwave Oven.  
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorised to extend, enlarge  
or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct or indirect damages or losses or for any  
incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the  
loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinst allation, transportation and insurance  
costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfilment of all obligations and responsibilities of Sharp  
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
WARRANTY PERIODS  
Colour Television  
LCD TV  
1 year (picture tube 1 additional year)  
LCD Projector  
1 year (bulb 90 days)  
1 year  
1 year  
1 year  
1 year  
Video Cassette Recorder 1 year  
Camcorder  
TV/VCR Combo  
Microwave Oven  
DVD Player  
1 year (picture tube 1 additional year)  
2 years (magnetron 3 additional years for part only)  
1 year  
Audio Products  
Vacuum Cleaner  
To obtain the name and address of the nearest Authorised Sharp Service Centre or Dealer, please contact:  
SHARP ELECTRONICS OF CANADA LTD.  
SHARP ELECTRONICS OF CANADA LTD  
335 Britannia Road East  
Mississauga, Ontario  
L4Z 1W9  
(905) 568-7140 or 1-(877) SHARP-CC  
 
E-22  
MEMO/MÉMORANDUM  
 
MEMO/MÉMORANDUM  
 
SHARP ELECTRONICS OF CANADA LTD.  
335 Britannia Road East, Mississauga,Ontario L4Z 1W9  
PRINTED IN CHINA  
IMPRIMÉ EN CHINE  
92L87500013101  
 
10K R KI 1  

Sony Battery Charger ACV QH10 User Manual
Sony Speaker SRS D511 User Manual
Sony Stereo Amplifier XM 1002HX User Manual
Sony Stereo Receiver STR DH540 User Manual
Soundstream Technologies Stereo Amplifier Picasso User Manual
Sprint Nextel Telephone SCP 7000 User Manual
Sun Microsystems Switch 820 6799 10 User Manual
SUPER MICRO Computer Network Card 6014P TR User Manual
Sylvania Clock Radio SCR1336 User Manual
Sylvania TV VCR Combo WSSC132 User Manual