MKH 8020
Instructions for use
Contents
The MKH 8020 ................................................................................... 3
Delivery includes ............................................................................... 4
Putting the microphone into operation ....................................... 5
Connecting the microphone ...................................................... 5
Attaching the microphone using the microphone clip ......... 5
Using the windshield .................................................................. 5
Exchanging the microphone head ................................................. 6
Accessories ........................................................................................ 7
Specifications .................................................................................... 8
Manufacturer Declarations ........................................................... 10
Thank you for choosing Sennheiser!
We have designed this product to give you reliable operation
over many years. Over 60 years of accumulated expertise in the
design and manufacture of high-quality electro-acoustic
equipment have made Sennheiser a world-leading company in
this field. Please take a few moments to read these instructions
carefully, as we want you to enjoy your new Sennheiser
products quickly and to the fullest.
1
Important safety information
Notes on these y Please read these instructions carefully and completely
instructions for use
before using the microphone.
y Make these instructions easily accessible to all users at all
times.
y Always include these instructions when passing the
microphone on to third parties.
Before putting the y Never open the microphone. If devices are opened by
microphone into
operation
customers in breach of this instruction, the warranty
becomes null and void.
During operation y Water entering the housing of the microphone can cause a
short-circuit and damage the electronics. Protect the
microphone from wetness. Use only a slightly damp cloth to
clean the microphone.
(normal operating temperatures: 10 °C to 35 °C).
After operation y Use the microphone with care and store it in a clean, dust-
free environment.
Intended use of the microphone
Intended use includes:
y having read these instructions, especially the chapter
“Important safety information” on page 2,
y using the microphone within the operating conditions and
limitations described in this instruction manual.
“Improper use” means using the microphone other than as
described in these instructions, or under operating conditions
which differ from those described herein.
2
The MKH 8020
The MKH 8020 is a high-end omni-directional studio condenser
microphone from the modular MKH 8000 microphone series.
This series has the following features:
y Exceptionally low inherent self-noise prevents masking of
filigree sound structures
y Symmetrical transducer technology ensures extremely low
distortion
y Extremely wide frequency response for an optimum
resolution of the finest details
y Transformerless and fully floating balanced output provides
for easy connection at minimal distortion
y High sensitivity ensures interference-free transmission with
a high signal voltage
y Frequency independent directional characteristics for
minimum colouration in the direct and diffuse field
y Rugged metal housing with non-reflective Nextel coating,
making the microphone the ideal choice for in-vision use
y Compact design and small diameter allow the unobtrusive
positioning of the microphone, even close to instruments
y Modular design provides for easy exchange of the
microphone heads and the use of specially-tailored
accessories to suit every application
3
Delivery includes
1 x microphone, consisting of
– MKH 8020 microphone head and
– MZX 8000 XLR module
1 x MZQ 8000 microphone clip
1 x MZW 8000 double-layered windshield
1 x carrying case
1 x instructions for use
³
·
»
¿
³ Windshield, double-layered
· Microphone head
» XLR module
¿ Microphone clip
(thread adaptor included for 3/8" and 5/8" threads)
4
Putting the microphone into operation
Connecting the microphone
Connection data of the MKH 8020:
y 48 V (+/- 4 V) phantom powering (as per DIN 45596)
y XLR-3
y balanced
y 25 Ω impedance
y 1000 Ω min. terminating impedance
̈ Use a microphone cable with XLR-3 connector to connect the
microphone to the sound recording device. The sound
recording device must provide 48 V phantom powering.
Attaching the microphone using the microphone clip
̈ Select the suitable mounting thread:
– Without thread insert: 5/8" thread
– Thread insert: 3/8" thread
̈ Screw the microphone clip ¿ to a floor or table stand.
̈ Place the microphone into the microphone clip.
Using the windshield
̈ Slide on the wind shield ³ to minimize wind noise.
The wind shield changes the sound only slightly, but
attenuates wind noise by approx. 30 dB.
5
Accessories
Cat. No. Accessories/Spare parts
502094 MKHC 8020: Microphone head, omni-directional
502095 MKHC 8040: Microphone head, cardioid
502096 MKHC 8050: Microphone head, super-cardioid
502098 MZX 8000: XLR module
502333 MZW 8000: Windshield, double-layered
502315 MZE 8015: Extension tube, 15 cm
502433 MZE 8030: Extension tube, 30 cm
502316 MZE 8060: Extension tube, 60 cm
502317 MZE 8120: Extension tube, 120 cm
502434 MZEF 8030: Vertical bar, 30 cm
502318 MZEF 8060: Vertical bar, 60 cm
502319 MZEF 8120: Vertical bar, 120 cm
502322 MZFS 8000: Floor stand
502323 MZG 8000: Swivel joint
502324 MZGE 8000: Bar connector, mono
502325 MZGE 8002: Bar connector, stereo
502326 MZL 8003: Remote cable, 3 m
502327 MZL 8010: Remote cable, 10 m
502328 MZQ 8000: Microphone clip
502329 MZQ 8001: Mini clip
502330 MZS 8000: Shock mount
502331 MZT 8000: Metal table stand
502332 MZT 8001: Table stand with acrylic base
502435 MZH 8000: Ceiling mount
7
Specifications
Pick-up pattern
omni-directional
10 Hz – 70 kHz
Frequency response
Sensitivity
−30 dBV/Pa (31 mV/Pa)
138 dB SPL
Max. sound pressure level
Equivalent noise level
10 dB(A) (DIN 651)
21 dB
(CCIR 268-3)
Power supply
Current consumption
Diameter
48 V (P48) phantom powering
3.3 mA
19 mm
Length
41 mm (75 mm with MZX 8000)
25 g (55 g with MZX 8000)
−10 °C to +60 °C
Weight
Temperature range
8
Polar diagram
Frequency response curve
9
Manufacturer Declarations
Warranty
2 years
CE Declaration of Conformity
Sennheiser electronic GmbH & Co. KG declare that this device is
in compliance with the essential requirements and other
relevant provisions of Directive 89/336/EU.
WEEE Declaration
Please dispose of this product at the end of its operational
lifetime by taking it to your local collection point or recycling
centre for such equipment.
10
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
Printed in Germany
Publ. 06/07
515894/A01
|