Dual-FunctionUSBWall
ChargerPowerBank-5000mAh
UserReferenceGuide
Introduction
The Dual-Function USB Wall Charger Power Bank
- 5000mAh with foldable AC plug is a combination
of 2-Port USB wall charger and portable 5000mAh
power bank making it ideal for use at home or
on-the-go.
Package Contents
•
Dual-Function USB Wall Charger Power Bank
- 5000mAh
•
User reference guide
LOT Number Sticker
For future product return or exchange, this LOT
number is required. Please keep it for your
reference.
LOT Number
Part Number
1
Do04w-0n9l9o7aAd from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Port
2 USB Charging Ports
Input
AC 100~240V / 50-60Hz
USB Charger:
DC 5V/ 3.4A (Total), up to 5V/ 2.4A (Per port)
USB Output
Capacity
Dimensions
Weight
5000mAh
1.18" (W) x 2.17" (H) x 3.94"(D)
6.7 oz
Layout
LED Power Indicator
Foldable AC plug
USB Charging Port
(x2)
Figure 1: Layout
•
•
•
Foldable AC Plug: Plug it into a reliable
power outlet for power source
USB Charging Port (x2): Connect USB
devices here for charging by USB cable
LED Power Indicator: Indicate the power
status. On/ Off when the power is On/ Off.
3
LED Indicator for Power Bank
- Battery recharging process (plugged into
an AC power outlet)
Blinking
Blinking
Blinking
Solid Blue
Red Light Green Light Blue Light Light
0% - 34%
35% - 74% 75% - 99%
100%
Table 1: Recharging Battery Level Indication
- USB device charging process (connected
to USB devices)
Blinking
Red Light
Solid Red Solid Green Solid Blue
No Light
Light
Light
Light
Fully
discharged
<10%
11% - 34% 35% - 74%
75 - 100%
Table 2: Current Battery Level Indication
D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Instructions for Use
Charging the Power Bank
Note: It is recommended to fully charge the
Power Bank before initial use.
1.
Unfold the AC plug and plug into a reliable
power outlet.
2.
The LED power indicator blinks while
recharging the Power Bank. Refer to Table 1
on page 4 for battery level status.
When the Power Bank is fully charged, the
LED will be solid blue.
3.
4.
Disconnect the Power Bank from the power
outlet, it will power off automatically.
Charging your USB Device
Note: It is recommended to use your USB device's
original equipment USB charging cable.
Wall Charger
1.
Unfold the AC plug and plug into a reliable
power outlet.
2.
Connect your USB device to a USB charging
port using the USB device's USB charging
cable.
5
3.
When the USB device is fully charged,
disconnect it and unplug the Wall Charger
from the power outlet.
Power Bank
1.
To activate the Power Bank, shake it from
side to side. Verify the power LED indicator
is on before connecting your USB device.
Connect your USB device to a USB charging
port using the device's USB charging cable.
When the USB device is fully charged,
disconnect the USB charging cable from the
Power Bank and USB device. The Power Bank
will power off automatically.
2.
3.
Notice
•
ALWAYS UNPLUG the Wall Charger from
the power outlet when not in-use
DO NOT store or use the Power Bank in high
temperature, damp areas, or in direct
sunlight
•
•
•
DO NOT open the case of the Wall Charger,
doing so will void the warranty
Keep out of reach from children
D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 1-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for one (1) year from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol
standards are evident by the overall ease of installation and compatibility of
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors,systemintegrators,andVARsintheAmericasand
theUK, andthroughe-commercesites.
PRODUCT NAME
Dual-Function USB Wall Charger Power Bank - 5000mAh
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Dual-FunctionUSBWallChargerPowerBank-5000mAhisatrademarkofSIIG, Inc. SIIGand
the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication
are for identification only and may be trademarks of their respective owners.
August, 2015
Copyright © 2015 by SIIG, Inc. All rights reserved.
|