SECO LARM USA Security Camera EV 1323B12DW User Guide

ENFORCER CCD IR DAY/ NIGHT CAMERA MANUAL  
®
TROUBLE SHOOTING  
The screen is blank  
Check that the camera is powered up.  
Check that the power supply’s polarity is correct.  
Check that the monitor is powered up.  
Check that the video cable connecting the camera to the monitor is connected properly.  
The screen image is dim  
Clean the lens (using a soft, clean cloth).  
Check that the light source is adequate.  
The screen image has poor contrast  
Adjust the monitor’s contrast knob.  
Change the position of the camera.  
The screen image flickers  
The screen image is distorted  
The camera case is hot  
IR LEDs do not turn on  
Change the position of the camera.  
MANUAL  
Change the position of the camera.  
Check that the correct power supply is in use.  
Check that the correct power supply is in use.  
EV-1323C12DW  
1/3" CCD Color IR Day/Night Camera  
IMPORTANT  
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws  
and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use  
of this product in violation of any current laws or statutes.  
EV-1323B12DW  
1/3" CCD B/W IR Day/Night Camera  
Weatherproof  
WARNING  
Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not open the case  
of this device, as there are no field-serviceable components inside.  
FCC COMPLIANCE STATEMENT  
Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device,  
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference  
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to  
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case  
the user will be required to correct the interference at his own expense.  
WARRANTY  
ENFORCER IR Cameras are warranted against defects in material and workmanship while used in normal service for a period  
of one (1) year from the date of sale to the original customer. Our obligation is limited to the repair or replacement of any  
defective part if the unit is returned, transportation pre-paid, to SECO-LARM.  
NOTICE  
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one  
of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.  
SECO-LARM is also not responsible for misprints or typographical errors.  
Copyright © 2004 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,  
without the written permission of SECO-LARM.  
SECO -LARM® U.S.A., Inc.  
16842 Millikan Avenue, Irvine, CA 92606  
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326  
SECO-LARM®  
®
Website: www.seco-larm.com  
PITNW1  
DAY_NIGHT_IMU0604c.PMD  
E-mail: sales seco-larm.com  
@
 

Quadra Fire Indoor Fireplace CUMBGAP MBK User Guide
RCA TV Antenna VH126N User Guide
Roland Musical Instrument Amplifier CUBE 80X User Guide
Samsung Speaker System MP 43 User Guide
Sanus Systems TV Mount LMT15 User Guide
Sanyo Air Cleaner ABC VW24A User Guide
Sanyo Digital Camera vpc z400e User Guide
Sanyo Refrigerator MPR 311DH User Guide
Sarlo Trimmer SS 18 User Guide
Schumacher Battery Charger MKC 10 User Guide