RCA Home Theater System RT2910 User Guide

FCC Information  
FCC Information  
User Manual  
THELIGHTNINGFLASHANDARROWHEAD  
WITHIN THE TRIANGLE IS WARNING  
SIGN ALERTING YOU OF “DANGEROUS  
VOLTAGEINSIDE THE PRODUCT.  
For Your Safety  
Technical Specification  
Product: Dolby Digital Audio / Video Receiver  
Brand: RCA  
A
The AC power plug is polarized (one blade is wider  
than the other) and only fits into AC power outlets  
one way. If the plug won’t go into the outlet  
completely, turn the plug over and try to insert it  
the other way.  
RT2910  
Electrical Consumption  
Power Supply: 120V ~ 60Hz  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
THE EXCLAMATION POINT WITHIN THE  
TRIANGLE IS A WARNING SIGN ALERTING  
YOU OF IMPORTANT INSTRUCTIONS  
ACCOMPANYING THE PRODUCT.  
If it still won’t fit, contact a qualified electrician to  
change the outlet, or use a different one. Do not  
attempt to bypass this safety feature.  
This class B digital apparatus complies  
with Canadian ICES-003.  
Cet appareil numérique de la classe B  
est conforme à la norme NMB-003 du  
Canada.  
FCC INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference  
to radio communications.  
This Home Theater has earned  
the ENERGY STAR.  
CAUTION:  
To prevent electric shock, match wide blade of  
plug to wide slot, fully insert.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
The apparatus shall not be exposed to dripping  
or splashing and that no objects filled with  
liquids, such as vases, shall be placed on  
apparatus.  
Headset Safety  
Do not play your headset at a high volume.  
Hearing experts warn against extended high-  
volume play.  
If you experience a ringing in your ears, reduce  
volume or discontinue use.  
You should use extreme caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
The mains plug is used as disconnect device.  
The mains plug of apparatus should not be  
obstructed OR should be easily accessed during  
intended use. To be completely disconnect the  
power input, the mains plug of apparatus shall  
be disconnected from the mains.  
Consult the dealer or an experienced radio / TV technician for help.  
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
Even if your headset is an open-air type  
designed to let you hear outside sounds, don't  
turn up the volume so high that you are unable  
to hear what is around you.  
Excessive sound pressure from earphones and  
headphone can cause hearing loss.  
This class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment  
Regulations.  
Service Information  
This product should be serviced only by those  
specially trained in appropriate servicing  
techniques. For instructions on how to obtain  
service, refer to the warranty included in this user  
manual.  
The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom panel of unit.  
Refer to the identification / rating label located on the back panel of your product for its proper  
operating voltage.  
IMPORTANT: The power cord can be unplugged to turn off the main power to the unit. It should also be  
easily accessible in an emergency.  
Connecting for Power  
Make sure you connect all your other electronic  
components and the speakers before plugging  
your unit into the outlet. Plug the power cord in  
the wall outlet, matching the wide blade of the  
plug with the wide slot in the outlet. Be sure to  
insert the plug completely.  
Leave sufficient space around the appliance to allow adequate ventilation: 10cm on either side and  
at the back, as well as 7cm above it are ideal.  
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  
Printed in China  
It's important to read this instruction prior to using your new product for the first time.  
811-AV6291W130  
- 1 -  
- 2 -  
Connections and Setup  
Connections and Setup  
Connections and Setup  
Important Safety Instructions  
Please read and save for future reference.  
Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Refer all ser vicing to qualified ser vice  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as the power cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
One main unit  
Digital Connection  
Setup and Maintenance of the Unit  
Provides spaces for sufficient ventilation as  
indicated:  
Connecting to HDMI Components  
One remote control with batteries  
Onepairoffrontspeakers,onepairofrearspeakers,  
one center speaker and one subwoofer  
One pig-tail antenna wire  
Some of the following information may not apply  
to your particular product; however, as with  
any electronic product, precautions should be  
observed during handling and use.  
The digital audio jacks can accept Dolby Digital (Surround Sound) or PCM (Stereo) signals when  
compatible components are connected.  
This unit provides one optical and one coaxial digital input jacks for the connection of your  
components that have digital audio outputs.  
Note: This product will play audio from HDMI-connected products  
TV with HDMI Input  
while also passing on the video signal to a HDMI-connected TV.  
One AM loop antenna  
One coaxial digital cable  
One pair of audio cable for analog connections  
One English, one French & one Spanish user manuals  
One English, French & Spanish quick start guides  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
To connect DVD player, Satellite receiver, Cable box, Blu-ray player or TV that has a digital audio  
output, use a coaxial digital (included) or an optical digital cable (not included) to carry the audio  
signal and enjoy Dolby Digital sound quality.  
Satellite Receiver or Cable Box  
Blu-ray Disc Player  
A separate optical or coaxial cable is needed for each digital connection.  
BD/DVD/SAT-CABLE/TV/GAME  
Additional safety information  
Apparatus shall not be exposed to dripping or  
splashing and no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
Alwaysleavesufficientspacearoundtheproduct  
forventilation.Donotplaceproductinoronabed,  
rug, in a bookcase or cabinet that may prevent air  
flow through vent openings.  
Do not place lighted candles, cigarettes, cigars,  
etc. on the product.  
Connect power cord only to AC power source as  
marked on the product.  
Care should be taken so that objects do not fall  
into the product.  
Do not attempt to disassemble the cabinet. This  
product does not contain customer serviceable  
components.  
Optical Digital In (Audio)  
Connect to optical digital output of Cable box, Satellite receiver, DVD, Blu-ray player,  
TV or other compatible devices using the Optical Fiber Cable (not included).  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (Including amplifiers) that produce  
heat.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong is provided for your safety.  
If the provided plug does not fit into your wall  
outlet, consult an electrician for replacement of  
the obsolete outlet.  
Coaxial Digital In (Audio)  
Connect to coaxial digital output of DVD, Cable box, Satellite  
receiver, TV or other compatible devices using the Coaxial Digital  
Do not connect to the AC power cords until all  
connections are completed.  
Donotuseyoursetimmediatelyaftertransferring  
it from a cold place to a warm place: there is risk  
of condensation.  
Left and right  
front speakers  
Left and right  
rear speakers  
DVD player  
Connecting to Audio Components  
Cable (included).  
BD/DVD/SAT-CABLE/TV/GAME  
Do not expose your set to water and excessively  
high temperatures.  
After having disconnected your set, clean the  
case with a soft cloth, or with a slightly damp  
leather chamois. Never using strong solvents.  
Notes: • If yourTV has digital audio output, you can connect it to the corresponding digital  
audio input of the system instead of using analog connection.  
• Optical and coaxial cables carry only the audio portion of the signal.  
Center speaker  
ANALOG AUDIO IN  
AM/FM GAME/LINE-IN  
BD  
TV  
VCR  
DVD  
SAT/CAB  
SOURCE  
Analog Audio  
Signals  
Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
R
C
R
1
9
2
A
B
2
Analog Audio  
Signals  
Protect your Components from  
Overheating  
If your product operates on batteries, adhere to  
the following precautions:  
Remote  
control with  
batteries  
Connecting the Antennas  
Coaxial digital  
cable  
Connect the AM and FM antennas to the AM and FM terminals on the system’s back panel.  
They must be hooked up in order to receive clear reception. For FM reception, extend antenna to its full  
length. For AM reception, rotate the antenna horizontally to get better reception.  
Donotblockventilationholesinanycomponent.  
Arrange the components so that air can circulate  
freely.  
A. Any battery may leak electrolyte if mixed with a  
different battery type, inserted incorrectly, or if  
all batteries are not replaced at the same time.  
B. Any battery may leak electrolyte or explode if  
disposedofinreoranattemptismadetocharge  
a battery not intended to be recharged.  
C. Discard leaky batteries immediately. Leaking  
batteries can cause skin burns or other personal  
injury. When discarding batteries, be sure to  
dispose of them in a proper manner, according  
to your state / provincial and local regulations.  
D. Battery shall not be exposed to excessive heat  
such as sunshine, fire or the like.  
Only use attachments / accessories specified by  
the manufacturer.  
Use only with a cart, stand, tripod, bracket or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart / apparatus combination  
to avoid injury from tip-over.  
Donotstackcomponentsdirectlyontopofeach  
other.  
Do not place the unit near other components  
that generate heat such as heating vents.  
Allow adequate ventilation when placing your  
components in a stand.  
Place an amplifier near the top shelf of the stand  
so heated air rising from it will not affect other  
components. If you have a satellite receiver, you  
should place it on the top shelf.  
Pig-tail  
antenna wire  
Audio cable for  
analog connections  
Digital Audio in Connection  
FM  
User  
Quick start  
guide  
]
manual  
Digital Input  
Connect components, such as DVD players, Satellite receiver/Cable boxes, BD (Blu-ray DiscTM) players or TVs,  
capable of outputting Dolby Digital (Surround Sound) or standard PCM (Stereo) format digital signals.  
AM loop antenna  
Portable Cart  
Warning  
Note: “Blu-ray Discis a trademark of Blu-ray Disc Association.  
- 3 -  
- 4 -  
- 5 -  
Connections and Setup  
- 6 -  
Unit Controls  
Connections and Setup  
Connections and Setup  
AM Loop Antenna and FM Indoor Antenna  
1. Uncoil the antenna wire and locate the base end of the AM antenna.  
2. Press down on the antennas tab to open the terminal.  
3. Insert the antenna wires into the terminal and release the tabs to secure the wires in place.  
4. Make sure the white wire on the AM loop antenna is inserted into the AM loop terminal and the other  
wire is inserted into the ground loop terminal.  
Positioning Speakers  
Front Speaker Placement  
For best results, follow the speaker placement  
below.  
Better Surround Placement  
Main Unit  
Location  
If possible, place surround speakers to either side of the listening area, not behind it.  
3
1
10  
9
Height  
1
Alignment  
2
3
If space permits, install surround speakers 2-3 feet above viewers. This helps to minimize localization  
effects.  
Align the center speaker evenly with (A) or slightly  
behind (B) (the left and right speakers), but not  
ahead of them.  
Aiming  
2
Aim surround speakers straight across the room, not down at viewers, to help create a more open, spacious  
surround sound field.  
Connecting the speakers  
Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each  
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the  
terminal and insert the wire. Release the tab to lock wire in the terminal.  
8
4
5
6
7
1
1.  
/
(TUNING buttons)  
When connecting the speakers, make sure the polarities (“+“ speaker wire to “+“ on the unit. For example,  
red wire to red terminal on the unit) of speaker wires and terminals match.  
4
3
Tunes in to desired stations in AM/FM mode.  
Courtesy Dolby Laboratories  
If the cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will  
damage the Home Theater’s amplifier.  
2. ON/STANDBY  
Turns on / off the unit. When the unit is turned on, the unit will go to the mode it was in before powered  
off.  
1. Left, Right (Front Speakers)  
Front speakers carry primarily music and sound  
effects.  
Front Speakers  
Center  
Speaker  
3.  
/
(PRESET buttons)  
Courtesy Dolby Laboratories  
2. Center  
Selects preset stations in AM/FM mode;  
Selects item to be set in SETUP MENU.  
Right  
Left  
In surround mode, the center speaker carries most  
of the dialog as well as music and effects.  
It should be set between the left and right  
speakers.  
Subwoofer  
Courtesy Dolby Laboratories  
Alternative Surround Placement  
4. GAME jacks  
Rear wall  
Connects game consoles or other AV products that have AUX audio outputs.  
Angle  
If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or towards  
the sidewalls (C, D).  
Experiment with placement until sounds seem to surround you, rather than come from behind you.  
3. Surround (Rear Speakers)  
Place the left and right speakers to form a 45-  
degree angle with your favorite viewing position  
to duplicate the soundtrack mixer’s perspective.  
Purple and Black  
5. LINE IN  
The surround speakers’ overall sound balance  
should be as close as possible to the front speakers.  
Proper placement is vital to establish an evenly  
distributed sound field.  
Connects portable audio devices or other AV products that have a LINE-OUT jack.  
6.  
/
(SURROUND buttons)  
Height  
Selects among digital surround sound effects. (HALL, CHURCH, CLUB, STADIUM, STUDIO, STEREO, DOLBY  
PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE) depending on input signal.  
Adjusts value in SETUP MENU.  
4. Subwoofer  
SUBWOOFER  
AUDIO OUT  
The three front speakers should be as close as  
possible to the same height. This often requires  
placing the center speaker directly on top (A) or  
beneath (B) the TV set.  
A subwoofer is designed to reproduce powerful  
low bass effects (explosions, the rumble of  
spaceships, etc.).  
Use this jack on  
the rear panel  
to connect an  
active subwoofer  
other than the  
one supplied.  
7. DVD, TV, SAT-CABLE, AM/FM, VCR, BD and GAME/LINE-IN (SOURCE buttons)  
Selects sound source.  
Magnetic Shielding  
Courtesy Dolby Laboratories  
Speakers placed less than two feet from the TV set  
must be magnetically shielded in order to prevent  
picture distortion. Center speaker provided with  
this unit is magnetically shielded to protect your  
TV set.  
A
8. Headphone jack  
No adjacent walls  
9. MASTER VOLUME  
Adjusts the volume.  
Blue and Black  
Grey and Black  
Surround speakers can go on stands facing each other to approximate sidewall mounting (A), or to the  
sides or rear of the viewing area, aimed upwards; they can go right on the floor, or preferably, a few feet  
off the floor such as on end tables (B).  
10. SETUP  
Left  
Right  
Enters or quits the SETUP menu.  
B
Rear Speakers  
(Surround Sound)  
Courtesy Dolby Laboratories  
- 7 -  
- 8 -  
- 9 -  
- 10 -  
 

PYLE Audio Stereo Amplifier PVA3U User Guide
Python Welder 091 0593 User Guide
QSC Audio Thermometer DSP 4 User Guide
Runco Home Theater System VX 4C User Guide
Ryobi Trimmer BC30 RY30160 User Guide
Samson Musical Instrument Amplifier 112C User Guide
Samson Musical Instrument MPL 1502 User Guide
Samsung DVD Player DVD HR725 User Guide
Seagate Computer Drive 72003 User Guide
Sennheiser Computer Hardware SKM 565G User Guide