PACD-507
INSTRUCTION MANUAL
CLK
REL
PWR
CAR COMPACT DISC PLAYER
MO
INT
LO C
RPT
SEL
LO UD
RDM
MUTE
BAND
EQ
AUTO-LOADING COMPACT DISC PLAYER
AM/FM STEREO MANUAL TUNING RADIO
BASIC OPERATION
7. MO/INT BUTTON
MO MODE: Press it to select mono or stereo mode.
INT MODE: During CD mode, press “INT” (intro) button to hear the first 10 seconds
of each track on the disc. Press this button again to restore the player to its normal
play mode.
8. LOC/RPT BUTTON
LOCAL/DISTANCE MODE: When in the radio mode, press it to select local or
distance broadcast station receive sensitivity.
REPEAT MODE : During CD mode, press RPT button to repeat a single track.
9. LUD/RDM BUTTON
LUD MODE: When reduce the volume to half level, press it to enhance the bass
effect.
RDM MODE: During CD mode, press RDM button for more than 2 seconds to play
all tracks in the random order, press it again to cancel the function.
10. MUTE BUTTON
Press it to eliminate the sound immediately. Press it again to release this mode and
recover the previous volume level.
11. BAND BUTTON
RADIO MODE: Press it to select your desired radio band and the word which band
is selected will be displayed on LCD.
CD MODE: Press it to change the mode to radio mode.
12. PWR BUTTON
Press power button to turn on or off the unit.
13. BUTTON
RADIO MODE: Change the mode to CDP mode.
CDP MODE: During CD playback, press it will stop play temporarily. Press it again
to return to normal play back.
14. or BUTTON
A. In CD mode, press
/
button during playback to skip to next or back one track.
button for several seconds during playback
to fast forward or fast reverse. Releasing the button to stop fast playing.
B. In CD mode, press and hold
/
15. BUTTON
Press (EJECT) button to stop CD play and eject CD from the slot.
16. LED INDICATOR
Flashing when detachable panel is removed.
17. RESET BUTTON
Press it to rehabilitate the distorted program to zero.
2
INSTALLATION
DASH BOARD
METAL MOUNTING STRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
PLAIN WASHER
CONSOLE
TAPPING SCREW
SLIDE BRACKET HOUSING
HEX BOLT
3
ELECTRIC CONNECTION
FOR 4X7W
MAIN UNIT
ANTENNA CONNECTOR
RED
IGNITION
SWITCH (B+)
FUSEBOX
YELLOW
MEMORY (B+)
GROUND(B-)
FRONT RCA
OUTPUT CABLE (optional)
Rch RED
BLACK
Lch WHITE
AUTO
ANTENNA
BLUE
WHITE
GREY
FRONT
LchSPK
FRONT
RchSPK
WHITE/BLACK
GREY/BLACK
GREEN
VIOLET
REAR
REAR
LchSPK
RchSPK
GREEN/BLACK
VIOLET/BLACK
4
DISC NOTICE
DISC PLAY:
Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit.
Label
surface up
NOTE:
Do not try to insert another disc when one has been already inserted. Doing so may
damage the unit.
Handle the disc by its edge. And to keep the disc clean, do not touch the surface.
Do not stick paper or tape on the disc.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Or leave
it in a car parked in direct sunlight where there can be a considerable rise in
temperature.
5
SPECIFICATIONS
Supply voltage
: 12V DC (11V-15V), test voltage 14.4V, negative ground
: Less than 5A
Current consumption
Audio signal output
characteristics
: (1) Frequency response
(2) S/N Radio
20 Hz-20 kHz
85 dB (JIS)
(3) Wow and Flutter
Below measurable limits
FM SECTION:
Frequency Coverage ............................................................................. 88 to 108 MHz
IF ................................................................................................................... 10.7 MHz
Sensitivity (S/N = 30 dB).................................................................................... 20 dBu
Stereo Separation.............................................................................................. >30 dB
AM SECTION:
Frequency Coverage.......................................................................... 530 to 1710 KHz
IF...................................................................................................................... 455 KHz
Sensitivity (S/N = 30 dB).................................................................................... 40 dBu
Note:
Specifications and design are subject to modification, without notice, due to improvements
in technology.
6
TROUBLE SHOOTING
Before going through the check list, check wiring connection. Should any of the
problem persist after check list has been made, consult your nearest service dealer.
Symptom
No power.
Cause
Solution
The car ignition switch is
not on.
If the power supply is properly
connected to the car accessory
terminal, switch the ignition key
to “ACC”.
The fuse is blown.
Replace the fuse.
Disc cannot be
loaded or ejected. the player.
Presence of disc inside
Remove the disc in the player,
then put a new one.
Inserting the disc in reverse Insert the compact disc with
direction.
the label facing upward.
The disc is extremely
dirty or defective.
Clean the disc or try to play a
new one.
Temperature inside the car Cool off or until the ambient
is too high.
temperature return to normal.
Condensation.
Leave the player off for an hour,
then try again.
No sound.
Volume is in minimum.
Adjust volume to a desired level.
Check wiring connection.
Wiring is not properly
connected.
Sound skips.
The installation angle is
more than 30 degrees.
Adjust the installation angle less
than 30 degrees.
The disc is extremely dirty
or defective disc.
Clean the compact disc, then
try to play a new one.
The operation keys The built-in microcomputer Press the RESET button.
do not work.
is not operating properly
due to noise.
Front panel is not properly fixed
into its place.
The radio does not The antenna cable is not
Insert the antenna cable firmly.
work.
connected.
The signals are too weak.
Select a station manually.
88-C2950-14
7
|