Solution Series Emergency Lighting
SOLUTION
Page 1 of 2
12 Volt 72 Watts Recessed Steel Housing with Impact Resistant Polycarbonate Cover
The Solution is an architectural, fully recessed emergency light of unsurpassed performance. Available in either ceiling mount or wall mount versions, Solution can
light up to 90 linear feet to one footcandle average. Solution is fully recessed, therefore it’s unobtrusive — and unlike surface mount emergency lights, it does not
invite tampering.
Performance
Ceiling Mount
3.7”
.5”
(9.4 cm)
(1.3 cm)
15.5”
I.E.S. format photometric data files are available for use with most lighting
layout application software. Contact Lightolier Sales for specific layout
assistance at 910-259-1000
(39.4 cm)
9.0”
10.5”
13.6”
(22.9 cm)
(26.7 cm)
(34.5 cm)
.5”
Wall Mount
(1.3 cm)
3.7”
.56”
(9.4 cm)
15.5”
(1.4 cm)
(39.4 cm)
10.5”
9.0”
(26.7 cm)
13.6”
(22.9 cm)
(34.5 cm)
3
1
Cut-out dimensions are 14 ⁄4” x 9 ⁄
8”
Complete Fixture consists of unit and two lamp reflector systems.
How to Specify:
SOLUTION
EXAMPLE:
SOLUTIONWWL (Wall Mount)
SOLUTIONWCL (Ceiling Mount)
Model Series
Housing
Mounting
Solution
W = White
B = Black
WL = Wall Mount
CL = Ceiling Mount
Options
Features
SD = Self-Diagnostics
1. Illumination: Two high performance 35 watt MR16 lamps combined with a
patented reflector system. Optical assemblies can be rotated from 0° to 90°
for corner installations.
SDTD = Self-Diagnostics with Time Delay
EX = Special Transformer (Specify voltage & frequency)
RTS1 = Remote Test
2. Housing: 20 gauge galvanized steel backbox, flush cover and diffusers con-
structed of impact resistant polycarbonate. White finish is standard, black is
optional.
3. Mounting: Unit is either ceiling or wall mountable. (Specify mounting)
4. Optional Self-Testing/Self-Diagnostics: Unit performs automatic three
minute discharge test every 30 days. A manual discharge test from one to
90 minutes is available. Real-time system checks occur automatically every
minute. Individual LED indicators illuminate red if either a battery, charger or
lamp failure occurs.
TP = Tamperproof
Accessories
IBHK = Bar Hanger Kit for Mechanical Ceilings
T15TPTOOL = Tamperproof Screwdriver
WMLKIT = Wall Mounted Lens Kit
CMLKIT = Ceiling Mounted Lens Kit
CMLKITB = Ceiling Mounted Lens Kit for Black Unit
5. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state charging circuitry Fully automatic, voltage regulated charging system is
complete with low voltage disconnect, AC lockout, and brownout protection.
Includes an AC indicator/systems status lamp and manual test switch.
6. Battery: Maintenance free, sealed lead calcium battery with 5 year life and
an operating temperature between 65°F (19°C) and 85°F (30°C).
7. Input Power Requirements:
Job Information
Type:
Job Name:
Cat. No.:
120 VAC- .32 amps; 277 VAC- .14 amps
Warranty
Lamp(s):
Notes:
Electronics: 3 years, Battery: 5 years (1 year full, 4 years pro-rata)
Code Compliance
U.L. 924 listed for insulated ceiling systems (IC rated).
NFPA 101, NEC, BOCA and OSHA illumination standards.
Meets ADA specifications for wall mounted lighting fixtures.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|