MJ5 Exit Signs MJ5
Page 1 of 1
Chicago Exit Signs
Fluorescent or optional incandescent lamp AC-only and emergency exit models meet Chicago requirements. Rugged steel signs for wall, ceiling or end mount applications.
Standard Exit
Combination Model (DEH option)
A
B
C
D
E
12.75” 9.5”
32.4cm 24.1cm 36.8cm 6.4cm
14.5”
2.5”
26.25”
66.7cm
How to Specify:
MJ5
RW
SERIES
MODE OF
OPERATION
A = AC Only Exit
E = Emergency
Operation Exit
# OF
FACES
1 = Single face
2 = Double face
LETTER
COLOR
RW = Red on
White
EXIT FACE
DESIGNATOR
Single Face Models
MJ5 =Chicago Exit
Double Face Models
18 = EXIT (No Arrow)
21 = EXIT (Right or
3 = EXIT (No Arrow)
6 = EXIT (Right Arrow)
9 = EXIT (Left Arrow)
12 = EXIT (Double Arrow)
2 = STAIRS (No Arrow)
5 = STAIRS (Right Arrow)
8 = STAIRS (Left Arrow)
24 = EXIT (Double Arrow)
17 = STAIRS (No Arrow)
20 = STAIRS (Right or
Left Arrow)
23 = STAIRS (Double
11 = STAIRS (Double Arrow) Arrow)
Features
Options
1. Illumination: AC Light Source: Standard exit face illumination is provided
by two 7 watt PL type fluorescent lamps. Letter brightness and illumination
uniformity exceed UL requirements with both incandescent and fluorescent
models. Emergency Light Source: Exit illumination in all models is provided by two
6 volt, 5.4 watt wedge base incandescent DC lamps. MJ5E-DEH combination
models with side mounted lighting heads are provided with 6 volt, 12 watt
halogen bi-pin lamps.
DEH = Combination Model w/ Side Mounted Par 36 12W Halogen Heads
277 = 277VAC, 60Hz. Input (AC models only)
SW = Special Wording (consult factory)
SX = Self-Diagnostic Circuit (emergency models only)
IA = Audible Intermittent Alarm (emergency models only)
IV = Visual Intermittent Alarm (emergency models only)
FA = Fire Alarm Panel Interface
2. Housing: MJ5 Series exits are constructed of heavy duty steel finished
in white baked-on powder paint providing scratch and corrosion resistance.
Exit face features 6” letters with 3/4” stroke on translucent glass panels and
Full length directional arrows to meet City of Chicago visibility requirements.
Mounting canopy is standard.
3. Electronics: 120/277 VAC dual voltage input with surge-protected,
solid-state circuitry. Fully automatic, temperature compensating, variable rate
float charging system is complete with low voltage disconnect, AC lockout,
brownout protection, AC indicator lamp and test switch.
INC = Two candelabra base 15T6 120 volt, 15 watt incandescent AC lamps.
Accessories
MJSKW = 18” Stem Mounting Kit (white)
MJSKB = 18” Stem Mounting Kit (black)
MJPG9 = Wire Guard - Wall Mount (AC and emergency models)
MJPG10 = Wire Guard - Wall Mount (combination models)
4. Battery: Maintenance-free, sealed, lead calcium battery has an
estimated service life of 5 years, and an operating temperature range of 65°F
(19°C) to 85°F (30°C).
5. Input Power Requirements: AC Only: 19W; Emergency Operation: 29W
6. Warranty: Unit: (excluding lamps) 3-years full coverage against defects
in materials and workmanship from date of shipment. Battery: 3 years full
warranty plus an additional 7 years of pro-rata coverage
Job Information
Type:
Job Name:
Cat. No.:
Code Compliance
Lamp(s):
Notes:
All models are UL Listed and meet NFPA 101 Life Safety Code, NEC, OSHA and City
of Chicago codes. Emergency models are UL924 Listed.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|