Rwegwistewr yo.uprhproildiupctsan.dcgoetmsup/pworteatlcome
RWSS5510
RWSS9500
EN User manual
=+ꢀ7:ꢁ Ԛ͂ʹ˫ꢀ
=+ꢀ&1ꢁ Ⴌ
߀ ൱Ҭꢀ ꢀ
DE Benutzerhandbuch
ES Manual del usuario
FR Mode d’emploi
ꢀ
IT Manuale utente
NL Gebruiksaanwijzing
PT-BR Manual do Usuário
RU ꢀꢁꢂꢃꢄꢃꢅꢆꢇꢄꢃ ꢈꢃꢉꢊꢋꢃꢄꢌꢇꢍꢉꢎ
Contents
1 Notice
2
2
Compliance
Important
2
Disposal of your old product
3
2 Connect
3
3
3
Place the wireless receiver
Connect the wireless transmitter
Connect rear speakers to wireless receiver 4
Connect power cord
4
5
5
3 Troubleshooting
4 Product speciꢏcations
EN
1
Philips
1 Notice
Modelo: RWSS5510, RWSS9500
Compliance
Agência Nacional de Telecomunicações
“Este equipamento opera em caráter secundário,
isto é, não tem direito à proteção contra
interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
Hereby, Philips Consumer Lifestyle, declares that
this Wireless Rear Audio System RWSS5510,
RWSS9500 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Note
• This equipment has been tested and found
to comply with the limits for a Class B,C
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
Safety
Risk of electric shock or ꢏre!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
•
Never place the product and accessories
near naked ꢀames or other heat sources,
including direct sunlight.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more
of the following measures:
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance coupler
is used as the disconnect device, the disconnect
device shall remain readily operable.
•
•
•
Reorient or relocate the receiving
•
•
Disconnect the product from the power
antenna.
outlet before lightning storms.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or ꢏre!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
•
Consult the dealer or an experienced
radio/TV technician for help.
2
EN
Risk of injury or damage to the product!
2 Connect
•
Never place the product or any objects
on power cords or on other electrical
equipment.
Place the wireless receiver
•
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Place the wireless receiver near the AC outlet
and in between the rear speakers. Align the
wireless receiver with the home theater, with
Philips logo facing the home theater.
Risk of overheating!
•
Never install this product in a con\ned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Disposal of your old product
WIRELESS
RECEIVER
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
Note
• For best reception, make sure that the line-
of-site between the wireless receiver and the
home theater is not blocked by furniture, walls
and other objects.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Connect the wireless
transmitter
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Connect the wireless transmitter to the
WIRELESS REAR AUDIO connector on the
back of the home theater.
EN
3
For RWSS9500
Connect rear speakers to
wireless receiver
REAR
LEFT
REAR
RIGHT
Note
• The rear speakers in the picture shown may
vary.
~AC MAINS
For RWSS5510
REAR LEFT
REAR RIGHT
REAR
REAR
LEFT
RIGHT
Connect the rear left and rear right speakers
to the matching connectors at the back of the
wireless receiver.
REAR
LEFT
REAR
RIGHT
Connect power cord
Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Connect the rear left and rear right speakers to
the matching connectors at the bottom of the
wireless receiver.
Connect the power cords for home theater,
wireless receiver and other devices after you have
made all of the other connections.
» The wireless indicator lights and the
wireless receiver is ready to use.
4
EN
3 Troubleshooting
Follow these steps within twenty seconds if
there is no sound from the rear speakers and
the indicator on the wireless receiver blinks
continuously for more than one minute.
4 Product
specifications
Note
• Speci\cation and design are subject to change
without notice.
For home theater with Blu-ray
1 Disconnect the power cord from the
wireless receiver for a few seconds and
connect it back again.
Wireless receiver
For RWSS5510
2 Switch to either AUX source or MP3 link
•
•
•
•
•
•
•
•
Power supply rating: 110-240V; ~50-60 Hz
Total output power: 250 W (RMS)
Power consumption: 50 W
Standby power consumption: ꢁ 0.45 W
Frequency response: 150 Hz ~ 20 kHz
S/N Ratio: 65 dB (A-Weighted)
Distortion: 1%
Dimensions (WxHxD): 126 x 131 x 126
(mm)
Weight: 1.1 kg
source.
3 Press and hold for three seconds.
» ‘PAIRING’ blinks and then ‘PAIRED’ is
displayed.
4 If ‘FAILED’ is displayed, repeat steps 1 to 3.
For other home theaters
1 Disconnect the power cord from the
wireless receiver for a few seconds and
connect it back again.
•
For RWSS9500
2 Press .
•
•
•
•
•
•
•
•
Power supply rating: 110-240V; ~50-60 Hz
Total output power: 300 W (RMS)
Power consumption: 40 W
Standby power consumption: ꢁ 0.45 W
Frequency response: 150 Hz ~ 20 kHz
S/N Ratio: 65 dB (A-Weighted)
Distortion: 1%
3 Press INFO.
» A screen is displayed.
4 Press 1, then press SURR within \ve
seconds.
» ‘PAIRING SUCCESS’ is displayed.
5 If ‘PAIRING FAIL’ is displayed, repeat steps 1
to 4.
Dimensions (WxHxD): 265 x 116 x 106
(mm)
•
Weight: 1.4 kg
Wireless transmitter
•
•
•
Frequency response: 5.8 GHz
Dimensions (WxHxD): 55 x 53 x 33 (mm)
Weight: 0.05 kg
EN
5
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
sgptt_1015/00_v3
|