Always there to help you
Register your product and get support at
SBT310/37
Question?
Contact
Philips
User manual
Contents
1 Important
4
Safety
Notice
4
5
2 Your Bluetooth Speaker
Introduction
7
7
7
7
What's in the box
Overview of the main unit
3 Get started
Connect power
Turn on
8
8
9
4 Play
9
9
10
10
11
11
Play from a Bluetooth device
Play from an external device
Control play
Adjust brightness
Set time
5 Product information
11
11
Specifications
6 Troubleshooting
12
EN
3
e Do not use this apparatus near water.
1 Important
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Safety
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Know these safety symbols
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
specified by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
CAUTION:To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
n Battery usage CAUTION –To prevent
battery leakage which may result in bodily
d Follow all instructions.
4
EN
injury, property damage, or damage to
the unit:
of the FCC Rules. Operation is subject to the
following two conditions:
•
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like.
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
( French )
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence et la partie 15 des
Règles FCC. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
RF Exposure info
q Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
This equipment complies with FCC’s and IC's
RF radiation exposure limits set forth for an
uncontrolled environment.The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
( French )
Cet appareil est conforme aux limites
d’exposition au rayonnement RF stipulées par
la FCC et l’IC pour une utilisation dans un
environnement non contrôlé. Les antennes
utilisées pour cet émetteur doivent être
installées et doivent fonctionner à au moins 20
cm de distance des utilisateurs et ne doivent
pas être placées près d’autres antennes ou
émetteurs ou fonctionner avec ceux-ci. Les
installateurs doivent s’assurer qu’une distance
de 20 cm sépare l’appareil (à l’exception du
combiné) des utilisateurs.
Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Caution: Changes or modifications made to
this equipment not expressly approved by
Philips may void your authorization to operate
this equipment.
FCC Section 15.105 statement:
FCC & RSS compliance statement:
This device complies with Industry Canada
licence-exempt RSS standard(s) and Part 15
NOTE:This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
EN
5
FCC Rules.These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
negative consequences on the environment and
human health.
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected. -- Consult the dealer or an
experienced radio/TV technician for help.
ICES-003 complies statement
This Class B digital apparatus complies with
Canadian ICES-003.
( French )
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Note
Disposal of your old product
• The type plate is located on the bottom of the
apparatus.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
6
EN
2 Your Bluetooth
Speaker
Overview of the main unit
a
b
c
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
f
g
d
e
h
Introduction
a
•
Switch the speaker between standby
mode and working mode.
With this speaker, you can enjoy audio from the
compatible Bluetooth device or other audio
devices.
b
c
/
•
•
Adjust volume.
Adjust time.
What's in the box
•
•
•
In automatic standby mode:press for 2
seconds to wake up your speaker.
In standby mode: press for over 2
seconds to start time set.
Press repeatly to select different levels
of display brightness when the AC
power cord is plugged in.
Check and identify the contents of your
package:
•
•
•
Main unit
1 x Adaptor
Quick start guide
•
Press for 8 seconds to erase all pairing
information.
d DC IN 5V 1A
•
Power supply socket
e MP3-LINK
•
Connect an audio device.
f Bluetooth indicator
•
Steadily on when the speaker is
connected with Bluetooth compatible
device.
•
Flashes when disconnected Bluetooth
pairing .
g Display screen
Display time.
•
h Battery level indicator
Flashes when the battery level is low
•
EN
7
3 Get started
Caution
• Use of controls, adjustments, or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
AC power
Caution
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the speaker.
Model No. __________________________
Serial No. ___________________________
Connect the AC power adaptor to:
•
the power supply socket on the back of
the speaker.
Connect power
•
the wall power outlet.
This Bluetooth speaker can be powered by
either AC power or batteries.
Battery power
Warning
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• The battery contains chemical substances, so it should
be disposed of properly.
• Keep children away from the battery.
1 Open the battery compartment.
2 Insert AA batteries with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
8
EN
4 Play
Turn on
•
Slide on the speaker to the right.
» The Bluetooth indicator flashes (blue).
Play from a Bluetooth device
Switch to standby mode
The speaker switches to standby mode
automatically in the following situations.
You can listen to a Buetooth device through this
speaker.
•
•
•
In Bluetooth mode: no audio signal from
your Bluetooth device over 15 minutes.
In MP3 link mode: no audio signal
detected over 15 minutes.
Note
• The effective operation range between the speaker
and your Bluetooth device is approximately 10 meters
(30 feet).
The battery level is low.
Note
1 Slide to the right to turn on Bluetooth
function of the speaker.
• The Bluetooth connection will be terminated when the
speaker enters standby mode, you can wake up the
speaker by holding for 2 seconds.
» The Bluetooth indicator flashes.
2 Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
You can also switch your speaker to standby
mode manual by sliding to the left.
3 Select "PHILIPS SBT310" on your device
for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
•
For elder devices, you need to input
"0000" as pairing password.
4 Start music play on your Bluetooth device .
PHILIPS SBT310
PIN
0000
EN
9
Play from a PC
Play from an external device
You can also listen to audio through Bluetooth
in PC.
You can also listen to an external audio device
through this speaker.
Note
Note
• Make sure that you have installed Bluetooth driver in
your PC before pairing.
• The steps below are only for windows 7 operating
system. If you use other OS/IOS , refer to other OS/
IOS help.
• Your speaker can play under MP3-LINK audio only
when the Bluetooth paused or stopped.
1 Connect the MP3-LINK cable to:
•
the MP3-LINK jack (3.5mm) on the
back of the speaker.
1 Slide to the right to turn on Bluetooth
function of the speaker.
•
the headphone jack on an external
device.
» The Bluetooth indicator flashes.
2 Activate the Bluetooth function in your PC.
2 Start to play on the device.
3 Add a Bluetooth device in your PC and
select "PHILIPS SBT310" for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator steadily on.
4
Set "PHILIPS SBT310" as default
communication device in your PC.
1). Right click the speaker icon ( ) in
the lower right corner of the Windows
home screen and select "Playback Devices"
from the option menu
2). Right click desired speaker and select
"Set as Default communnication Device".
5 Start music play on your PC .
Control play
During play,
•
press VOL +/- to increase or decrease the
volume level.
10 EN
5 Product
information
Adjust brightness
Note
• You can adjust display brightness only when the AC
power cord is plugged in.
Note
• Product information is subject to change without prior
notice.
Press repeatedly to select different levels of
display brightness.
Specifications
Amplifier
Rated Output Power
Signal to Noise Ratio
Aux-in Link
2 x 2 W RMS
>67 dB
600 mV RMS 20
kohm
Set time
Note
• You can set time only when the speaker is in standby
mode.
Bluetooth
Bluetooth version V2.1+ EDR
1 Slide the left.
Frequency band
2.402-2.480 GHzISM Band
10m (free space)
2 Hold on the speaker for more than two seconds.
Rang
» [12] begins to blink.
3 Press to confirm.
» The hour digits begin to blink.
General information
AC power (power
adaptor)
Model:
4 Press
/
to set hour.
ASUC12A-050100
Input: 100-240V~,
50/60Hz, 0.3A;
Output: 5V 1A;
3W
5 Repeat steps 3-4 to set minute.
There is a spot on the lower right corner of the screen.
•
The spot lights off when the time set
before 12:00 at noon.
Operation Power
Consumption
•
The spot lights on when the time set after
12:00 at noon.
Standby Power
<1W
Consumption
Dimensions - Main Unit
(W x H x D)
300 x 116 x
156mm
Weight- Main Unit
1.2 kg
EN 11
6 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•
•
•
Make sure that the AC power plug of the
speaker is connected properly.
Make sure that there is power at the AC
outlet.
Make sure that the batteries are inserted
correctly.
No sound
•
Adjust the volume.
No response from the speaker
•
Restart the speaker.
12 EN
EN 13
Specifications are subject to change without notice
2014 ©WOOX Innovations Limited.
All rights reserved.
This product was brought to the market byWOOX
Innovations Limited or one of its affiliates, further referred
to in this document asWOOX Innovations, and is the
manufacturer of the product. P&F is the warrantor in relation
to the product with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V.
SBT310_37_UM_V2.0
|