LPS 100/00, LPS 100/01 - Manual potentiometers
Product details
LPS 100/00 and LPS 100/01
- Manual linear potentiometer
combined with a micro switch
- Rotary potentiometer for
recessed (LPS 100/00) or surface
mounting (LPS 100/01)
- Housing material ABS, colour
white
- Screw type terminals for solid
wire cross section 2.5mm2
Applications
- The potentiometers are used in
combination with the electronic
HF light-regulating ballasts for
manually controlling the light level
of fluorescent lamps in areas such
as offices, meeting rooms, etc.
- The built-in microswitch enables
the lights to be switched on and
off by means of a separate relay
or contactor.
LPS 100/00
LPS 100/01
- The potentiometers can also be
used for setting the reference
level in light sensor controlled
installations.
46.5
46
∅ 53 max.
Dimensions in mm
Philips
Lighting
LPS 100/00, LPS 100/01 - Manual potentiometers
Miscellaneous
- The outgoing low-voltage leads and the mains
voltage leads should be kept separate from each other.
Electrical connections
LPS 100/00
LPS 100/01
1 2 3 4
1 2 3 4
1 –
2 +
3
1 –
2 +
3
1-10 V dc to HF-reg. ballasts or controller
1-10 V dc to HF-reg. ballasts or controller
micro switch
micro switch
micro switch
micro switch
4
4
Related documentation
- Installation instruction
- Trios System Handbook LCH 1099
(English)
(English)
3222 609 26301
9137 010 00503
LPS 100/00, LPS 100/01 - Manual potentiometers
3222 636 30040
2/98
Printed in the Netherlands
Data subject to change
|