Contents
Introduction
KARAOKE
Environmental Information .....................................4
Supplied accessories ..............................................4
Safety Information ...................................................4
Symbols Used in this booklet ...............................4
General operation ...............................................15
General setup .......................................................15
Karaoke learning and language learning function
........................................................................................15
Functional overview
Setup menu
Front panel .................................................................5
Rear panel ..................................................................5
Remote control .......................................................6
Basic operation ..................................................16
General setup menu .......................................16
Disc lock .................................................................16
VFD DIM...................................................................16
Program ..................................................................16
OSD language .........................................................17
Screen saver ............................................................17
Speaker setup page .........................................17
DOWNMIX mode ................................................17
D.R.C .......................................................................17
Preparation
Basic Connection ..................................................7
Connecting to a TV .............................................7
Connecting to Optional Equipment .....................8
Conecting to a Audio System ..............................8
Inserting batteries into the Remote Control ..9
Using the Remote control ...................................9
NTSC/PAL Conversion .........................................9
Switching On ..........................................................10
SPDIF setup ........................................................18
SPDIF OUT setup ..................................................18
LPCM 96K mode ...................................................18
Video Output setup ......................................19
Video output ...........................................................19
TV display ................................................................19
TV type ...................................................................19
Smart Picture ..................................................20
Video Mode ...........................................................20
Personal Picture Setting ......................................20
Preferences setup .............................................21
Audio language .......................................................21
Subtitle language .....................................................21
Disc menu language ...............................................21
Password ..................................................................21
Parental control ......................................................22
Default setup...........................................................22
Smart Navigator ....................................................22
Operation
Basic Playback ....................................................10
General Operation ...........................................10
Video control during playback ............................10
Audio control during playback ............................11
Repeat .......................................................................11
Repeat A-B .............................................................11
5 disc Resume .........................................................11
OSD (On-Screen Display) ...........................12
Title Selection .........................................................12
Chapter Selection .................................................12
Time Search ............................................................12
Zoom ......................................................................12
Special DVD Features .....................................12
Playing a title .........................................................12
Playing a chapter ....................................................12
Camera Angle .........................................................12
Changing the audio language ...........................12
Subtitles ....................................................................12
SpecialVCD & SVCD Features ..................13
Playback Control (PBC) ...................................13
Preview function ...................................................13
Specifications
Specifications ...........................................................23
Maintenance
Maintenance ........................................................ 23
Picture CD & MP3 CD Playback
Function introduction............................................14
Auto playback .........................................................14
Selection playback ................................................14
Preview playback ...................................................14
Playback with multi-angles ...................................14
Playback Speed Control ........................................14
Zoom picture ..........................................................14
Troubleshooting
Troubleshooting ....................................................24
3
DVD616K IFU for /751
3141 016 18911
Introduction
room, moisture may condense on the lens of the
disc unit inside the DVD player. Should this occur,
the DVD player would not operate normally.
Leave the power on for about one hour with no
disc in the DVD player until normal playback is
possible.
Thank you for purchasing this Philips DVD player.
This Owner’s Manual explains the basic operation
of this DVD player.
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to separate
into three materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags, protective
foam sheet).
G The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
G When the DVD player is switched to Standby
mode, it is still consuming some power. To
disconnect the system from the power supply
completely, remove the AC power plug from the
wall socket.
Your DVD player consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
Symbols Used in this Booklet
The below symbols appear in some headings and
notes with the following meanings:
Supplied accessories
– DVD-Video player
– Remote control with Batteries
– Audio cable
– Video cable
– Owner’s Manual
Safety Information
Helpful Hints!
G Before operating the DVD player, check that the
operating voltage indicated on the typeplate is
identical with the voltage of your local power
supply. If not, please consult your dealer.
G Place the DVD player on a flat, hard and stable
surface.
G Some DVD video discs require specific
or allow only limited functions during
playback.
G There must be sufficient room in front of the
player for the drawer to be opened.
G In cabinet, allow about 2.5cm (1 inch) of free
space all around the player for adequate
ventilation.
G Do not expose your player to extreme of
temperature or humidity.
G If the DVD player is brought directly from a cold
to a warm location, or is placed in a very damp
4
DVD616K IFU for /751
3141 016 18911
Functional Overview
Front and Rear Panels
B; PLAY/PAUSE
– starts/interrupts playback
POWER ON/OFF
– switches the player On or Off
9 STOP
– stops playback
Disc Tray
DISPLAY
– shows the current status of the player
/ OPEN/CLOSE
– opens/closes the disc tray
MIC socket 2 for karaoke
MIC socket 1 for karaoke
MIC volume control 1 for karaoke
MIC volume control 2 for karaoke
Mains Cord
– connect to power outlet
Video out (Y CB CR)
– connect to a TV with component video
inputs
AUDIO OUT (Left/Right)
– connect to AUDIO inputs of an
amplifier, receiver or stereo system
Video out (CVBS)
– connect to a TV with CVBS inputs
Video out (S-Video)
– connect to a TV with S-Video inputs
Optical & Coaxial output
– connect to a receiver with optical & coaxial inputs
Caution:Do not touch the inner pins of the jacks on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
5
DVD616K IFU for /751
3141 016 18911
Functional Overview
Remote Control
RETURN / TITLE
– go back to previous menu /
show title menu
POWER B
– switches DVD ON or to
standby-on mode
DISC MENU
– access menu of a DVD disc
/switch PBC on/off for VCD disc
0-9 numerical key pad
– select numbered items in a
menu
1 2 3 4
– select an item in the menu/
fast forward/backward, slow
forward/backward
DISPLAY
– display information on TV
screen during playback
SYSTEM MENU
– access or remove player’s
system menu
OK
– acknowledge menu selection
S
– go to a previous chapter or
track
T
– go to next chapter or track
SUBTITLE
STOP ( 9 )
– subtitle language selector
/switch off subtitle
– stops playback
PLAY ( B )
ANGLE
– starts playback
– select DVD camera angle
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
ZOOM
– enlarge video image
AUDIO
REPEAT
– audio language selector
– repeat chapter, track, title, disc
KARAOKE
– display Karaoke menu to set
MIC on or off
REPEAT (A-B)
– repeat a specific segment
PREVIEW
– Preview the content of a track
or whole disc
KEY
– display Karaoke menu to set
key control
VOCAL
– select audio channel
MODE
MUTE
– Disable or enable sound output
– display karaoke menu
Note:
Press digit “1” for about 2 seconds to
OPEN or CLOSE disc tray.
6
DVD616K IFU for /751
3141 016 18911
Preparation
G Make one of the following connections,
Basic Connections
G Please refer to the instruction books of yourTV,
VCR, Stereo System or other devices as
depending on the capabilities of your existing
equipment.
The following guidelines are options for the best
picture and sound quality available on your DVD
player.
necessary to make the best connections.
Caution: Do not connect the component
video and S-Video output at the same time
as only one can be active at any time( refer
to chapter “Video Out Setup”).
Connecting to aTV
If yourTV has a CVBSVideo input
connector,
Connect the CVBS VIDEO OUT on the DVD
player to the CVBS VIDEO IN (cable supplied).
0
0
Warning!
– Never make or change connections with
the power switched on.
– Connect the DVD player directly to your
TV, instead of eg.aVCR, to avoid
distortion because DVD video discs are
copy protected.
If yourTV has a S-Video input connector,
Connect the S-Video OUT on the DVD player to
the S-Video IN (not supplied).
If yourTV has a Component video
(Y/CB/CR)input connector,
Connect theY/CB/CRVIDEO OUT on the DVD
player to the corresponding connector on theTV
using the component video cable (not supplied).
– Do not connect the DVD player AUDIO
OUT to PHONO IN of your player.
0
7
DVD616K IFU for /751
3141 016 18911
Preparation
Sound
Connecting to a Audio System
1 Digital audio connections provide the clearest
sound. Connect one of the DVD player’s
DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) to your amplifier or receiver.
2 If digital connections are not possible, connect
the DVD player’s red and white AUDIO OUT to
your amplifier, receiver, stereo orTV.
1 You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2 Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the stereo system.
Connecting to Optional
Equipment
G A digital component with a built-in MPEG 2,
Dolby Digital™ or DTS decoder allows you to
enjoy the surround sound while producing the
effect of being in a movie theater or a concert
hall.
Notes:
–
If the audio format of the digital output does
not match the capabilities of your receiver,the
receiver will produce a strong, distorted sound or no
sound at all.
–
To set the audio format of the current DVD in
the Setup Menu, refer to the chapter [ Setup
Menu].
If your receiver has a Dolby Digital™,
MPEG 2 or DTS decoder,
Connect to A/V receiver with digital
coaxial or optical cable
G Connect the DIGITAL COAXIAL AUDIO OUT
of the DVD player to the corresponding input on
the receiver using the normal audio or video
cable supplied.
8
DVD616K IFU for /751
3141 016 18911
Preparation
Notes:
AUTO can only be selected when using aTV
that has both the NTSC and PAL systems.
Slight picture distortions may occur due to this
conversion.This is normal.Thus, theAUTO format is
most suitable for the best picture quality.
Inserting batteries into the
Remote Control
–
–
1
2
Open the battery cover.
Insert batteries with the correct polarity as
indicated by the + and - symbols inside the
battery compartment.
3
Close the cover.
-
+
+
-
CAUTION!
–
Remove batteries if they are exhausted
or not to be used for a long time.
Do not use old and new or different
types of batteries in combination.
Batteries contain chemical substances,
–
–
so they should be disposed off properly and
kept away from children.
Using the Remote Control
G Direct the remote control at the remote sensor
of the DVD player.
G Do not drop or give the remote control a shock.
G Do not leave the remote control near extremely
hot or humid place.
G Do not spill water or put anything wet on the
remote control.
NTSC/PAL Conversion
This player is equipped with a NTSC/PAL
conversion feature to convert the video output
of the disc to match yourTV system.The
conversions supported are as below:
Disc
Output format
Selected mode
Type
Format
NTSC
PAL
AUTO
NTSC
PAL
NTSC
PAL
NTSC
DVD
VCD
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
PAL
NTSC
PAL
9
DVD616K IFU for /751
3141 016 18911
Operation
Preparation
Basic Playback
Switching On
1 Press POWER ON/OFF on the front panel.
2 Press OPEN/CLOSE on the front panel to open
disc loading tray.
3 Place the chosen disc in the tray, with the label
facing up.
4 Press OPEN/CLOSE again to close the tray.
G After recognizing this disc the player begin to
playback automatically.
1
2
Switch on theTV and DVD player.
Set theTV to the correctVideo IN channel. (eg.
EXT1, EXT2,AV1, AV2, AUDIO/VIDEO, etc.
Please refer to to yourTV owner’s manual for
detail)
GThe player display lights and the default screen
appears on theTV.
If you are using an external equipment (eg. audio
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment owner’s manual for detail.
3
Notes:
–
DVDs may have a region code.Your player will
not play discs that have a region code different
from the region code of your player.
–
If ‘Disc Lock’ is set to ON and the disc inserted
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see ‘Disc
Lock’).
General operation
Video control during playback
DVD VCD
CD
STOP
1 You can resume the play from the point at which
you stopped last time, if you just press the STOP
key once. It will start from the beginning if you
press the STOP key twice to stop playback.
DVD VCD
CD
PAUSE/STEP
1 To get a still picture, press PAUSE key during
playback.
2 To step forward to the next frame picture, press
PAUSE key again.
3 To resume normal playback, press PLAY.
DVD VCD
CD
SEARCH
1 To search the contents in fast speed, press the 2
or 1for fast forward/backward searching.
2 Press the 1or 2again to increase the speed for
searching.
3 Press PLAY to return to the normal playback.
10
DVD616K IFU for /751
3141 016 18911
Operation
Slow Motion
Repeat
DVD
DVD
1
To get slow motion effect during playback, press
3 or 4.
Repeat chapter/title/disc
G To repeat the current chapter, press REPEAT.
G To repeat the current title, press REPEAT a
second time.
2 Press 3 or 4again to get different playback
forward/backward speed.
3 Press PLAY to return to the normal play back.
G To exit Repeat mode, press REPEAT again.
VCD
CD
VCD
CD
Repeat track/disc
1
To get slow motion effect during playback, press
3.
G To repeat the current track, press REPEAT.
G To repeat the entire disc, press REPEAT a second
time.
2 Press 3again to get different playback forward
speed.
3 Press the PLAY key to return to the normal play
G To exit Repeat mode, press REPEAT again.
back.
NOTE:
DVD
VCD
CD
Repeat A-B
-The SLOW BACKWARD function is not available
for the SuperVCD/VCD/CD disc.
DVD-Video Discs: repeat a sequence in a
title
Video and Audio CDs: repeat a sequence in a
track
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end
point.
Audio control during playback
DVD VCD
CD
MUTE
1 Press the MUTE key to disable the sound output.
2 Press the MUTE key again to remove the mute.
3 To exit the sequence, press REPEAT A-B.
SURROUND SOUND
5 Disc Resume
DVD VCD
CD
VCD
DVD
CD
The DVD player can reproduce virtual surround
sound effect.
1 Press the Display key on the remote control.
2 Press 1 2 to highlight 3D option.
3 Press 3 4 to switch it on or off.
This player can resume the playback of last 5
discs, which should be unload at stop mode.
1 Load one disc, which is one of last 5 discs.
2 Press PLAY when DVD player is recognizing the
disc. if the information of this disc has been stored
in the memory of DVD player, it will be played
back from the point you stopped last time.
Audio channel selection
VCD
CD
1 SVCD has two stereo audio channels which are
used for playing karaoke or the audio language
selection. ( for instance, you can choose one
channel for only the music background of the
song while you play the karaoke.)
2 Press the AUDIO key on the remote control to
select the audio channel you want.
3 VCD has only one stereo audio channel, you can
select mono left audio channel or mono right
audio channel by pressing the AUDIO key on the
remote control.
11
DVD616K IFU for /751
3141 016 18911
Operation
OSD (On-Screen Display)
DVD VCD
Special DVD Features
Playing a title
A DVD disc may have one or more titles.This
depends on the content (a movie, video clips, a
drama series, etc) on the disc.
DVD
This function will provide some information about
your playing disc on the screen.
Press DISPLAY key on the remote control.
0
0 After you load a disc, information about the
content shows on the screen waiting for your
selection. Likewise, you can press the TITLE key
on the remote control to turn back to the title
menu during playback.
Title Selection
1 Press 1 2 to highlight optionTitle number.
2 Press 3 4 to change the title number.
G DVD player will playback selected title.
G Press the appropriate numerical key or 341
2 keys on the remote control to highlight your
selection.
Chapter Selection
1 Press 1 2 to highlight option chapter number.
2 Press 3 4 to change the chapter number.
G DVD player will playback selected chapter.
G Press the OK key to confirm it.
DVD
Playing a chapter
Time Search
When you have selected a title, it may include
one or more chapters.
0
Press 1 2 to highlight time display area.
For DVD discs:
0 To watch another chapter during playback, press
DISC MENU key to turn back to the chapter
menu(If disc has chapter menu).
G CC means total time has been played in
current chapter. CR means the remainder time of
current chapter.TC means total time has been
played in current titile.TR means the remainder
time of current title.
G Press the appropriate numerical key or 341
2 keys on the remote control to highlight your
selection.
For SuperVCD orVCD disc
G Press the OK key to confirm.
G DC means the time has been played back of
the disc. DR means the time is remainder of the
disc.TC means the time has been played back of
current track.TR means the time is remainder of
current track.
Press the 1 2 keys to highlight the itemTIME and
you can play from any point of the disc.
G Enter hours, minutes and seconds from left to
right in the time edit box using remote control
numerical key pad.( e.g. 0:34:27)
G After a chapter has been selected, you also can
press the ¡1 or 2™ key to make a change.
Camera Angle
Some discs contain scewhich have been shot
DVD
0
simultaneously from various angles.
This DVD player allows you to select the desired
camera angle.
Press the ANGLE key on your remote control.
NOTE: The function is available for the DVD discs
which have recorded several angles movie.
0
G Press the OK key to confirm it.
DVD
Zoom
Changing the audio language
DVD
VCD
0 Press AUDIO repeatedly to select the different
languages.
The Zoom function allows you to enlarge the
video image.
1 Press the ZOOM key to activate the function.
G Use the 341 2 key to view the rest part of
the zoomed picture.
NOTE: The function is activated, only if the DVD
disc is recorded with multi-languages audio tracks.
DVD
Subtitles
GGPlayback will continue.
0 Press SUBTITLE repeatedly to select the
different subtitles.
2 Press the ZOOM key again to return to the
original size.
0 Press SUBTITLE for about 2 seconds to switch
subtitle on or off.
NOTE: This function is NOT available for PAL
DVD discs or some DVD discs.
NOTE: The function is activated, only if the DVD
disc or SuperVCD disc is recorded with multi-
subtitles.
12
DVD616K IFU for /751
3141 016 18911
Operation
VCD
SpecialVCD & SVCD Features
Preview function
Playback Control (PBC)
PBC function allows you to enter the index menu
which is used to select a track after loading the
SVCD orVCD disc.
At STOP mode, press the PREVIEW key to enter
previewing menu.
+ shown as the left
If you want to activate the function,
1 Press the DISC MENU key on the remote control
to set the PBC On.
G Pay attention to the hint on the screen.
2 Use the ¡1 or 2™ key to select your chosen.
G If the items of the index menus are numbered,
press the appropriate numerical key on the
remote control.
1
Disc introduction
Select this function, DVD player will play back
every track for few seconds with full screen to
obtain summary of the content of the disc.
- Press the numerical key 1.
- Press OK key to confirm.
- Press STOP key to quit previewing.
G press the OK key to confirm.
2
Disc preview
3 Press the RETURN key to enter the index menu
This function will minify the picture of one track
enough to display every nine of these tracks on
the full screen which will help you to preview a
disc.
during the play back.
NOTE:
ꢀThe content of the index menu depends on the
disc. Please refer to the disc’s instruction for detail.
ꢀIf the disc doesn't include the PBC information,
this function will have no effect.
If you want to skip the index menu and
playback directly from the beginning,
1 press the DSIC MENU key on the remote control
to switch off the function.
- Press the numerical key 2.
- Press OK key to confirm.
- Select other tracks beyond this page by pressing
the ¡1 or 2™ key.
- Press the numerical keys to choose the preferred
track.
G For the karaoke discs, even if PBC function is
off, you still can use the ¡1 or 2™ key to select
the track you like.
- Press the OK key to confirm.
3
Track preview
This function is used to divided a single track into
nine parts and display them on the full screen
which will help you to preview the selected track.
- Press the numerical key 3.
- Press the OK key to confirm.
- Preview other tracks, press the ¡1 or 2™ key.
- Press numerical key to choose the starting point.
- Press the OK key to playback from starting point.
4
Quit preview function
- Press the numberical key 4.
- Press the OK key to exit.
13
DVD616K IFU for /751
3141 016 18911
Picture CD & MP3 CD Playback
Function introduction
Special functions during playback:
This player can playback JPEG format pictures and
MP3 files as well as being specially compatible
with Kodak Photo CD.
Auto playback
After you open one picture, the player can
playback each file in sequence automatically.
Picture CD containing JPEG format pictures with
file extentions of 'JPG'.The CD can be burned on
every computer, and pictures maybe from digital
camera or scanner. If the customers prefer, they
may make this CD become a Digital Album.
Selection playback
Press the numerical key to select your favourite
file directly.
In the JPEG playback menu, press the 1 2 3 4
key to select the folder you want and press the
OK to open it.
Press the 1 2 3 4key to highlight your
favourite file and press the OK key to confirm.
1
2
For playing this Digital Album (picture CD)
conveniently, our DVD player can
0 Auto playback of pictures on disc one at a time.
3
1
0
0
0
0
0
Display a preferred picture.
Zoom the picture.
Rotate the picture.
Flip the picture vertically or horizontally.
Playback speed control.
Preview function
Press the PREVIEW key at the STOP mode.You
will see nine pieces of minified pictures on the
screen.
0 Album and track selection.
2
3
Press the 2™ or ¡1 key to display the next or
the previous nine-picture-preview.
Press the 1 2 3 4key to highlight one of them
and press the OK to display.
0
0
0
0
0
Repeat (disc / album / track / picture).
Nested directory levels supported to 8 levels.
Maximum album numbers possible is 32.
Maximum MP3 Tracks Programmable is 96.
Maximum Number of Tracks is 999.
Playback with multi-angles
When displaying one picture onTV screen
Press the 1 2 3 key to get different effects.
3key: Flip the picture vertically.
0
Basic playback
1 Without any disc inserted and “NO DISC” is
shown on set, press the SYSTEM MENU key to
open the setup menu.
4key: Flip the picture horizontally.
1key: rotate the picture anti-clockwise.
2
Press the 3 4key to highlight the PREFERENCE
item.
Playback Speed Control
Press the 2key to adjust the playback speed.
0
3
4
Press OK to open the PREFERENCE menu.
Press the 3 4to highlight the SMART NAV
menu.
Zoom picture
Press the ZOOM key to display the picture with
different scales.
Press the 1 2 3 4 key to view the rest of the
zoomed picture.
0
0
5
6
7
Press OK to open the menu.
Press the 2key to enter the menu.
Press the 3 4key to highlight the NO MENU
orWITH MENU item.
G NO MENU: playback all images in sequence
automatically, and MP3 musics will be played prior
to pictures.
GWITH MENU:playback images in the selected
folder.
Note:
If you want to switch between MP3 musics and
pictures during automatical playback, please press
a valid number as shown on theTV screen after
the DVD player indexed the MP3 musics and
pictures found in the loaded disc.
8
Press the OK key to confirm your selection.
14
DVD616K IFU for /751
3141 016 18911
KARAOKE
Volume
General operation of karaoke
function
1
2
Press 1 2to highlight the optionVOLUME.
Press 3 4to adjust theVOLUME to adopt your
voice.
DVD 616K
STANDBY-ON
MIC
1
MIC
2
ECHO
1
2
Press 1 2to highlight the option ECHO.
Press 3 4to adjust the echo level.
1 Connect microphone to MIC1 or MIC2 or to
both sockets. Be sure the player has been
properly connected to yourTV or audio system.
2 Press KARAOKE on the remote control to display
karaoke menu.
Audio channels option
With this function, you can choose audio channels
during karaoke is available.
PressVOCAL on the remote control to choose
STEREO, LEFT VOCAL, RIGHT VOCAL, MONO
RIGHT or MONO LEFT .
G karaoke menu appears onTV screen, and the
option ‘MIC’ is highlighted.
1
0
Press 3 4to switch on karaoke function.
3 Load a karaoke disc and press PLAY to playback.
4 Turn on the microphone which is connected with
the DVD player and you can enjoy the Karaoke
immediatly.
G MONO RIGHT & MONO LEFT options can
fade out the original vocal.
Karaoke learning and language
VCD
learning function
1
Press MODE to display karaoke menu.
G Make sure you have set MIC on.
Press 1 2to highlight RECORD OFF.
Press 3 to set RECORD on.
Press 3 again to start recording from the point
you perfer.
2
3
4
G To adjust the volume of microphone, turn the
knob LEVEL1 or LEVEL2 on the right of front
panel.
G DVD player will record your voice and
original karaoke music.
Press 3 again to end recording.
G DVD player will playback the recording three
times in total to let you make a comparasion.
5 Press KARAOKE on the remote control to display
karaoke menu.
5
G karaoke menu appears onTV screen, and the
option ‘MIC’ is highlighted.
0
Press 3 4to switch off karaoke function.
6
7
Follow the instruction of step4 to step5 to
record other sequence.
NOTE: Please set the option DOWNMIX to LT/RT,
VSS or STEREO before switching on Karaoke
function.
Press 4 to quit Karaoke learning and language
learning function.
General setup of karaoke
function
Note: Keeping highlight cursor on RECORD option
will allow you to record by pressing 3 , and 4 to
quit. otherwise pressing 3 or 4 will get slow
motion effect.
Press MODE to display karaoke menu (Karaoke
menu will disappear if you do not press any key in
a minute).
KEY CONTROL
Press 1 2to highlight the option
KEY.
Press 3 4to adjust the pitch to
adopt your voice.
1
2
15
DVD616K IFU for /751
3141 016 18911
Setup Menu
Program (not available for DVD discs)
1 To choose the PROGRAM item, press the 34
keys.
2 Press the 2 key to move the cursor to the field of
the submenu to choose the
Basic operations
RETURN
DISPLAY
TITLE
0
1
Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
DISC
SYSTEM
MENU
MENU
OK
2
3
Press the OK key to open the
item ON.
G ON: Enter the PROGRAM item.
next level submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
return to the previous menu.
3
Press OK to enter the program page.
4 Press the 34 keys to highlight the preferred
Input your favorite track
Enter a valid track number by pressing the
numerical keys.
Press the 1 234 keys to move the cursor to the
next selected position.
menu.
1
2
5
Press SYSTEM MENU to quit the setup menu.
G When you quit the setup menu, the settings
will be stored in the player’s memory even if the
player is switched to power off.
3 Repeat the steps above to enter another track
number until the whole program is completed.
General setup menu
Exclude a track
Some settings are needed in this menu. they are:
DISC LOCK, PROGRAM,VFD DIM, OSD
LANGUAGE and SCREEN SAVER.
Follow the steps below:
1
2
Press the 1 234 keys to move
the cursor to track you want to
exclude.
Input an invalid track number to
cancel this track.
1 Press the SYSTEM MENU key to enter the
setup menu.
2 Press the 34 keys to choose the GENERAL
SETUP menu.
3 Press the OK key to confirm selection.
Cancel all tracks
Press the 1 234 keys to move the cursor to the
CLEAR button.
1
2
Press OK, all tracks will be cancelled.
Disc lock
3 Now you can input your favorite tracks again.
When the disc is locked, the player will store its
typical code into the memory
for the future identification. For the next
playback, the DVD player will prompt to enter
the password.
Press ¡1 or 2™ to program more tracks.
Playback tracks
When programing is completed,
Press the 1 234 keys to move the cursor to the
PROG button.
Press OK.
1
2
1 Press the 34 keys to highlight
the DISC LOCK item in the
GENERAL SETUP menu.
2 Press the OK key.
3 Enter the submenu by pressing the 2 key.
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
4 Press the 1 key to return to the GENERAL
SETUP menu.
G DVD player will playback the selected
program under the programed sequence.
Stop the program playback
At the PROGRAM page, when programing is
completed,
Press the 1 234 keys to move the cursor to the
QUIT button.
1
2
Press the OK key to quit this menu or
Press the STOP key twice to exit.
NOTE:
0
1. When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
2. To change the password , refer to the option
PASSWORD in the PREFERENCE menu .
VFD Dim
This function is used to adjust the brightness of
VFD on the front panel.
Press the 34 keys to highlight VFD DIM in the
GENERAL SETUP menu.
1
2
3
Press OK.
Enter the submenu by pressing the 2 key.
16
DVD616K IFU for /751
3141 016 18911
Setup Menu
which gives the setup system to
reproduce
4
Move the cursor by pressing the 34 keys to
highlight the selected item.
high quality surround sound.
Press SYSTEM MENU.
Press the 34 keys to highlight the SPEAKER
SETUP item.
G 100: make theVFD brighter than normal.
G 70: standard brightness
G 40: make theVFD to dim mode.
G OFF: switch off theVFD display.
Press OK to confirm.
1
2
3
Press OK to confirm.
5
6
Press the 1 key to return to the GENERAL
SETUP menu.
DOWNMIX mode
Press the 34 keys to highlight
the DOWNMIX item.
Enter the submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
LT/RT
1
2
3
0
OSD language
There are two options available for information
display onTV screen.
1
2
3
Press the 34 keys to highlight OSD LANG in
the GENERAL SETUP menu.
Enter the submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
G ENGLISH: OSD information will be displayed
in English.
G CHINESE: OSD information will be displayed
in Chinese.
G This item will be used only if your DVD player
is connected to a Dolby Prologic decoder.
Meanwhile, the DVD player can send the output
of Dolby Prologic signals.
0
STEREO
G This item will help to downmix the signal of
Dolby Digital into stereo signals directly output
from L/R port.
4
5
Press the OK key to confirm.
Press the 1 key to return to the GENERAL
SETUP menu.
4
5
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
Screen saver
This function is used to turn on or off the screen
saver.
Press the 34 keys to highlight SCR SAVER in the
GENERAL SETUP menu.
Enter its submenu by pressing
the 2 key.
D.R.C. (Dynamic Range
Compression)
DVD player will compress dynamic range of
sound effect output, when you do
not want to disturb your neighbours and your
famliy during midnight.
1
2
3
Move the cursor by pressing the
34 keys to highlight the selected item.
G ON: At STOP mode, if nothing is happened
within 5~6 minutes, screen saver will turn on.
G OFF: Screen saver is disable.
Press OK to confirm.
1
2
3
Press the 34 keys to highlight D.R.C.,
Enter the submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
G ON: Enable D.R.C.
G OFF:Disable D.R.C.
4
5
Press the 1 key to return to the GENERAL
SETUP menu.
4
5
Press OK.
Press the 1 key to return to the SPEAKER
SETUP menu.
Speaker setup page
This menu contains setup options of your speaker
system, such as DOWNMIX,
D.R.C.(Dynamic Range Compression),
17
DVD616K IFU for /751
3141 016 18911
Setup Menu
SPDIF setup
In this menu, you can set up digital audio format
outputing from coaxial and
optical terminals.
1
2
3
Press SYSTEM MENU to enter
the SETUP menu.
Press the 34 keys to choose the SPDIF SETUP
menu.
Press OK.
NOTE:
SPDIF is the abbreviation of Sony Philips Digital
Interface which is a protocol of digital data
transfering.
SPDIF OUT setup
Press the 34 keys to highlight the SPDIF OUT
item.
1
2
3
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
4
Press the 34 keys to highlight
the selected item.
G RAW: Original digital signals output.
G PCM: Convert to PCM signals to output.
Press OK.
Press the 1 key and return to the SPDIF SETUP
menu.
5
6
LPCM 96K mode
In this menu, you can set up sampling rate to
decode LPCM audio.
1
Press the 34 keys to highlight the LPCM 96K
item.
2
3
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
4
Move the cursor by pressing the 34 keys to
highlight the selected item.
G ON: Detect the loading disc for appropriate
sampling rate.
G OFF:The decoding process is under the
sampling rate of 48KHz.
5
6
Press OK.
Press the 1 key to return to the SPDIF SETUP
menu.
18
DVD616K IFU for /751
3141 016 18911
Setup Menu
Video Out Setup
There are items included in VIDEO OUT PAGE
menu asTV DISPLAY, VIDEO OUTPUT, TVTYPE
BLACK LEVEL,VIDEO MODE, BRIGHTNESS,
CONTRAST, SATURATION, HUE.
Press STOP twice.
Press SYSTEM MENU to enter its menu.
Highlight the SETUPVIDEO OUTPUTitem by
pressing the 34 keys.
WIDE(16:9)
1
2
3
4:3
NORMAL/LB
4
Press OK.
4:3
NORMAL/PS
Video output
In this menu, you can select the video output for
high quality picture.
Press the 34 keys to highlightVIDEO OUTPUT
in theVIDEO OUTPUT PAGE menu.
Press the OK key to open its submenu.
Setup the item as follows,
1
1
2
Press the 34 keys to highlight the TV DISPLAY
item in the SETUP VIDEO OUTPUT menu.
Press the OK key.
2
3 Press the 2 key to highlight the item of the
submenu.
4 Press the 34 keys to choose
an item.
3 Enter its submenu by pressing
the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
G S-VIDEO:Video signals will send an output
from the S-VIDEO on the rear panel of the DVD
player.
G YCBCR: If your TV set is equiped withY/CB/
CR input, you can choose for high quality picture.
5
6
Press OK.
Press the 1 key to return to the SETUP VIDEO
OUTPUT menu.
TV type
5
6
Press OK.
Before viewing the DVD orVCD, ensure that the
PAL or NTSC setting of the system matches your
TV set.
Press the 1 key to return to the SETUPVIDEO
OUTPUT menu.
NOTE: Any selection will not influence the signal
output of composite video.
1
2
Press the 34 keys to highlight
TVTYPE in the SETUPVIDEO
OUTPUT menu.
TV display
Select the aspect ratio of theTV to be
connected.
WIDE G when you connect a wide-screenTV
to the DVD player.
NORMAL/LB G when you connect a normal
TV to the DVD player. Displays a wide picture
with bands displayed on the upper and lower
portions of theTV screen.
NORMAL/PS G when you connect a normal
TV to the DVD player. Displays the wide picture
on the wholeTV screen with a portion
automatically cut off.
Press OK.
3 Enter its submenu by pressing the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the requisite item.
5
6
Press OK.
Press the 1 key to return to the SETUPVIDEO
OUTPUT menu.
NOTE: Choosing NTSC item indicates that the
player will output by NTSC system, Similarly, you
can sacquire PAL system by choosing the PAL item.
And the item MULTI means video output is
depending on the format of DVD or VCD discs.
19
DVD616K IFU for /751
3141 016 18911
Setup Menu
Brightness
Smart Picture function
1
2
Press the 34 keys to highlight BRIGHTNESS in
the VIDEO OUT SETUP menu.
Press OK to open its submenu.
In this menu, you can personalize your picture
setting, colors (brightness, contrast, saturation and
hue) can be changed to a fixed set of ideal
predefined picture setting(Bright, Standard and
Soft) or personal one, to suit various viewing
situation.
3 Press the 2 key to highlight the item of the
submenu.
4 Press the 34 keys to adjust the brightness level.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
Video Mode
In this menu, you can choose one picture setting
from a fixed set of ideal predefined picture
setting(Bright, Standard and Soft).
Contrast
1
Press the 34 keys to highlightVIDEO MODE in
theVIDEO OUT SETUP menu.
Press OK to open its submenu.
Press the 2 key to highlight the item of the
submenu.
1
2
Press the 34 keys to highlight CONTRAST in
the VIDEO OUT SETUP menu.
Press OK to open its submenu.
2
3
3 Press the 2 key to highlight the item of the
submenu.
4 Press the 34 keys to choose an item.
G BRIGHT: make theTV screen brighter.
G STANDARD: select a standard picture setting.
G SOFT:make theTV screen softer.
4 Press the 34 keys to adjust the contrast level.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
G PERSONAL:apply the setting you set before.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
Saturation
1
2
Press the 34 keys to highlight SATURATION in
the VIDEO OUT SETUP menu.
Press OK to open its submenu.
Personal Picture Setting
Personal picture setting includes the setup of
BLACK LEVEL, BRIGHTNESS, CONTRAST,
SATURATION and HUE, with which you can
personize your picture setting.
3 Press the 2 key to highlight the item of the
submenu.
4 Press the 34 keys to adjust the saturation level.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
Black Level
1
Press the 34 keys to highlight BLACK LEVEL in
theVIDEO OUT SETUP menu.
Press OK to open its submenu.
Press the 2 key to highlight the item of the
submenu.
Hue
2
3
1
2
Press the 34 keys to highlight HUE in the
VIDEO OUT SETUP menu.
Press OK to open its submenu.
4 Press the 34 keys to choose an item.
G ON: enable smart adjustment of black level.
G OFF:disable smart adjustment of black level.
5
6
3 Press the 2 key to highlight the item of the
submenu.
4 Press the 34 keys to adjust the hue level.
Press OK.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
Setup Menu
Disc menu language
Preferences setup
DVD discs are available for multiple disc menu
languages.This item is used to choose default disc
menu language.
There are items included in PREFERENCES menu
asAUDIO,SUBTITLE,
DISC MENU, PARENTAL CONTROL,
PASSWORD, DEFAULT and SMART NAV.
Press the STOP key twice.
Press SYSTEM MENU to enter
its menu.
Highlight the PREFERENCES
item by pressing the 34 keys.
Press OK to confirm your selection.
1
Press the 34 keys to highlight
the DISC MENU item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected tem.
1
2
2
3
4
3
4
5
6
Press OK.
Press the 1 key to return to the PREFERENCES
menu.
Audio language
DVD discs are available for multiple audio
languages.Use this item to choose your preferred
default audio language.
Press the 34 keys to highlight
theAUDIO item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
NOTE: If your DVD disc doesn’t include disc menu
language you have set, the player will use other
recorded language instead.
1
Password
2
3
4
This password is used for the parental control
and disc lock. Enter your password when you are
required by the DVD player.
1
2
Press the 34 keys to highlight the PASSWORD
item.
Press OK to open its submenu.
5
6
Press OK.
Press the 1 key to return to the PREFERENCES
menu.
NOTE:Your DVD disc may not include the audio
language which you set in the SETUP menu. If so,
the player will use other audio language instead.
3
4
Enter its submenu by
pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Enter the current 4 digit code.
If successful, the player will prompt for a new one.
Subtitle language
5
6
DVD discs are available for multi-subtitle language.
This item is used to choose default subtitle
language.
7 After that, enter the new password again to
reconfirm.
Press the PLAY key to return to the
PREFERENCES menu.
1
Press the 34 keys to highlight
the SUBTITLE item.
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Press OK.
Press the 1 key to return to the PREFERENCES
menu.
8
2
3
GThe new 4 digit code will take effect.
NOTE:
4
1.You can change the setup of parental control
and disc lock with a recognise password being
entered.
2.If you forget the password, you can enter the
default password 3308 and replace your password
after logging on.
5
6
NOTE:Your DVD disc may not include the subtitle
which you set in the SETUP menu. If so, the player
will use other audio language and subtitle instead.
Setup Menu
Default setup
DVD
Parental Control
If some problems occur during setting DVD, the
item DEFAULT is used to reset all items to
factory default and all your personal setting will
be erased.
Press the 34 keys to highlight the DEFAULT
item.
Movies on DVDs may contain scenes not suitable
for children.Therefore, discs may contain ‘Parental
Control’information which applies to the
complete disc or to certain scenes on the disc.
These scenes are rated from 1 to 8, and
1
alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The
‘Parental Control’ feature allows you to prevent
discs from being played by your children or to
have certain discs played with alternative scenes.
0 VCD, SVCD, CD has no level defination, so
parental control function has no effect on those
kinds of discs as well as most of illegal DVD discs.
0 You can follow the steps below to setup the
parental control:
2
3
Press OK to open its menu.
Enter its menu by pressing the 2
key.
4
Press OK.
NOTE:When this function is executed, all setups
will be reset to factory defaults.
Smart Navigator
In this menu, it contains of the setting when you
playback picture CD and MP3 CD.
Press the 3 4key to highlight the PREFERENCE
item.
1
Press the 34 keys to highlight
the PARENTAL item.
2
2
3
Press OK to open its menu.
Move to its submenu by pressing
the 2 key.
3
4
Press OK to open the PREFERENCE menu.
Press the 3 4to highlight the SMART NAV
menu.
4 Then use the 3/4keys to highlight a rating from
1 to 8 for the disc inserted.
5
6
7
Press OK to open the menu.
Press 2to enter the menu.
5
Press OK to confirm, then press the 1 key to
return to the PREFERENCES menu.
Press 3 4to highlight the NO MENU or WITH
MENU item.
G NO MENU: playback all images or MP3
musics in sequence automatically
G WITH MENU:playback images or MP3 musics
in the selected folder.
No Parental Control
Parental Control is not activated.The Disc will be
played in full.
Select NO PARENTAL item.
Press OK.
1
2
8
Press the OK key to confirm your selection
Ratings 1 to 8:
The disc contains scenes not suitable for children.
If you set a rating for the player, all scenes with
the same rating or lower will be played. Higher
rated scenes will not be played unless an
alternative which has the same rating or lower is
available on the disc. If no suitable alternative is
found, playback will stop and the 4-digit code has
to be entered.
22
DVD616K IFU for /751
3141 016 18911
Specifications
PLAYBACK SYSTEM
DVDVideo
Video CD & SVCD
CD (CD-Recordable and CD-Rewritable)
Picture CD
AUDIO PERFORMANCE
DA Converter
Signal-Noise (1KHz)
Dynamic range(1KHz)
24bit
90dB
80dB
DVD
fs 96 kHz
4Hz- 44kHz
4Hz-22kHz
4Hz-22kHz
4Hz-20kHz
4Hz- 20 KHz
MP3 CD
CD-R, CD-RW
DVD-R, DVD+RW
fs 48 kHz
fs 48 KHz
fs 44.1 kHz
fs 44.1 kHz
SVCD
VCD/CD
VIDEO PERFORMANCE
* CVBS
1Vpp --- 75Ω
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
* S-VIDEO
Y: 1.00Vpp --- 75Ω
C: 0.30Vpp --- 75Ω
Y:1.00Vpp --- 75Ω
CR: 0.7Vpp --- 75Ω
CB: 0.7Vpp --- 75Ω
Number of lines
Playback
625
525
Multistandard
(PAL/NTSC)
*YUV
CONNECTIONS
YUV Video Output Cinch
S-Video Output
Mini DIN 4-pins
Video Output
Audio Output(L+R) Cinch
Digital Output
Cinch
AUDIO FORMAT
Digital
Mpeg/ AC-3/ DTS
compressed Digital
16, 20, 24 bits
1 coaxial / optical
PCM
IEC958 for CDDA / LPCM/ MPEG1
IEC1937 for MPEG 2, Dolby
Digital and DTS
fs, 44.1, 48, 96 kHz
24, 32, 56, 64, 96, 128,
256 kbps & variable
bit rate fs, 16, 22.05,
24, 32, 44.1, 48 kHz
MP3(ISO 9660)
CABINET
Dimensions (w x d x h)
Weight
Analog Sound Stereo
435 x 235 x 71 mm
Approximately 2.5 Kg
Dolby Digital multichannel surrond sound downmix 2
channels.
Specifications subject to change without prior notice
Maintenance
Cleaning the Cabinet
¶
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶
¶
When a disc becomes dirty, clean it with a
cleaning cloth.Wipe the disc from the center out.
Do not wipe in a circular motion.
Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analog records.
23
DVD616K IFU for /751
3141 016 18911
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are
unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
No power
No picture
–
Check if the AC power cord is properly connected.
–
–
Check if theTV is switched on.
Check the video connection.
Distorted picture
–
–
The disc is badly scratched or dirty.
Sometimes a small amount of picture distortion
may appear .This is not a malfunction.
Completely distorted picture or
black/white picture with DVD
orVideo CD
–
Make sure the NTSC/PAL setting at the DVD
player matches the video signal of your television.
(See NTSC/PAL Conversion)
No sound or distorted sound
–
–
Adjust the volume.
Check that the speakers are connected correctly.
No audio at digital output
–
–
Check the digital connections.
Check the settings menu to make sure the digital
output is set to ALL or PCM.
–
Check if the audio format of the selected audio
language matches your receiver capabilities.
Disc can’t be played
–
–
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
No return to start-up screen when
disc is removed
–
Reset the unit by switching the player off, then on
again.
The player does not respond to
the remote control
–
Aim the remote control directly at the sensor on
the front of the player.
–
–
–
Reduce the distance to the player.
Replace the batteries in the remote control.
Insert the batteries with their polarities (+/– signs)
as indicated.
Buttons do not work
–
–
–
In order to completely reset the player, unplug the
AC cord from the AC outlet.
Player does not respond to some
operating commands during playback.
Operations may not be permitted by the disc.
Refer to the instructions of the disc.
DVD Video player cannot read
CDs/DVDs
Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVDVideo player
for repair.
24
DVD616K IFU for /751
3141 016 18911
DVD616K IFU for /751
3141 016 18911
Meet Philips at the Internet
DVD616K
CLASS 1
LASER PRODUCT
3141 016 18911
The products and services described herein
are not necessarily available in all countries
Due to continuous product improvements this
document is subject to change without notice.
|