Meet Philips at the Internet
Clock Radio
AJL308
Register your product and get support at
User Manual
W
AJL308
Printed in China
PDCC-JH/ZC-0743
Alarm
Alarm/Digital tuner
Power supply/Basic operation
To change time format
In the Clock menu, press 3 4 to select the
value of “12/24 Hour Format”.
.
CONTROL
➜
Power supply
Connect the supplied power adapter to the
set's DC 9V socket and to the power socket.
Turning on/off radio
To turn off radio, press OK.To turn on radio,
press OK again.
is displayed.
1
2
•
1
Repeat alarm
This will repeat your alarm call at 9-minute
intervals.
During the alarm call, press
REPEAT ALARM / BRIGHTNESS CON-
Press 1 2 to toggle between 12H and 24H.
To improve reception:
FM: Extend and adjust the pigtail for optimum
reception.
Helpful hints:
To avoid damage to the set, use only the
adapter supplied!
Note:
When the set is disconnected from the power
outlet for about 5 minutes, you need to reset the
time and date.
1
1
The type plate is located on the bottom
of the set.
.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory, manually or automat-
ically (Auto store).
TROL
➜
flashes.
Setting and activating alarm
You can set two different alarm times.
Switching off the alarm completely
Press repeatedly ALARM 1 or ALARM 2
is changed to
➜When alarm is deactivated,
Setting OSD (On Screen
Display) language
Press MENU.
until
.
Manual programming
Tune to your desired station (See “Tuning to
radio station”).
Press and hold TUNER for about 2 sec-
onds, then release.
➜Preset number will flash.
Press 34 once or more to allocate a
number from 1 to 20.
➜Preset number will flash.
Press TUNER again to confirm.
Repeat steps 1-4 to store other stations.
1
2
Press CLOCK.
Press and hold ALARM 1 or ALARM 2.
➜The hour digits flash.
Press or hold down 3 4 to set hour.
Press ALARM 1 or ALARM 2 to confirm.
➜The minute digits flash.
Press or hold down 3 4 to set minute.
Press ALARM 1 or ALARM 2 to confirm.
Press again ALARM 1 or ALARM 2 to
activate alarm setting.
1
is dispalyed.
1
2
➜The menu appears.
Helpful hints:
During alarm call, if no button is pressed, alarm
call will last 30 minutes.
2
3
4
5
Press 1 2 to highlight “General”.
Press 4 to highlight “Language”.
Press 1 2 to select desired language.
After finishing the setting, press CLOCK,
TUNER, PHOTO/VIDEO or MUSIC to
exit the setup menu.
3
4
3
5
6
7
Tuner
4
5
➜When alarm is activated,
➜At the set alarm time, the alarm will sound
and its volume will increase gradually.
is displayed.
Setting time and date
Note:
–You can erase a preset station by storing
another frequency in its place.
Selecting alarm mode
Press MENU.
➜The menu appears.
Use 1 2 to highlight “Clock”.
Press 34 to select “Alarm Music”.
Press 1 2 to select specific music you like.
➜Alarm will go off with the music you select.
Auto store
1
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
InTUNER mode, press MENU to display
tuner menu.
Press 4 to select “Tuner Auto Program”.
Press OK.
➜Available stations are programmed (FM).
After all stations are stored, the first auto-
store preset station will then automatically
play.
2
3
4
1
Tuning to radio station
1
2
Press TUNER to switch on radio (FM only).
Press and hold 1 2 for about 2 seconds,
then release.
➜The radio automatically tunes to a station
of sufficient reception.
Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press 1 2 briefly
and repeatedly until you have found optimal
reception.
2
3
Switching off the alarm
1
2
3
Press CLOCK.
Use MENU.
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
Use 3 4 1 2 to select a field of “Time Set”
and “Date (Year-Month-Day)”.
Press OK to confirm.
Press or hold down 3 4 to set the values.
Press OK to confirm.
Repeat Steps 3-6 to set other values of
“Time Set and “Date (Year-Month-Day)”.
After finishing the setting, press CLOCK,
TUNER, PHOTO/VIDEO or MUSIC to
exit the setup menu.
3
•
4
5
6
7
To listen to a preset or autostore
station
Press 34 once or more until the desired
preset station is displayed.
call at the same time for the following day:
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the
alarm
8
1
During the alarm call, press any button
except REPEAT ALARM / BRIGHTNESS
USB/Memory card(SD/MMC)
USB/Memory card(SD/MMC)
➜The slideshow of the stored pictures will
To select display picture format
Compatible memory card
– SD card
– MMC card
Using USB device/memory
card (SD/MMC)
Connect a USB device, or a memory card
(SD or MMC card) to AJL308, you can enjoy
audio, picture and video files stored on the
USB device or memory card through the
speakers and LCD screen of AJL308.
start from the selected picture.
Press 34 to rotate the picture 90 clockwise
•
You may change still picture display format on
the screen by selecting “Widescreen” or
“Normal” under “Display Format” in the
General Menu.
o
•
or anti clockwise.
•
•
Press 1 2 to display previous/next photo.
To change slideshow interval, see “Using
setup menu options”
Note:
In some USB flash players (or memory
devices), the stored contents are recorded
using copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as AJL308 device).
Normal
Wide screen
To view photo in clock mode
Press OK to access thumbnail, then press 3
4 1 2 to select desired photo, then press
OK to confirm.
Or, direclty press 3(1) /4(2) display
previous/next photo.
To enlarge the displayed photo (zoom
mode), press and hold CLOCK for around
2 seconds, then press OK repeatedly to
enlarge picture or resume to normal size, and
you may use 3 4 1 2 to pan the enlarged
picture through.To exit zoom mode, press
CLOCK again.
Listening to music
1
•
1
Plug a compatible USB device or a memory
card (SD or MMC) to USB port, or memory
card slot.
➜The folder(s) indicating the inserted device
appears.
Press 3 4 to select the folder of USB device
(if present) or memory card (if present).
Press OK to open the folder.
➜The set will auto switch to clock mode.
Press MUSIC to switch to music mode.
➜All the stored music files are listed in the
menu.
Press 34 to select a file.
Press OK to play.
To pause, press OK.To resume, press OK
again.
To select next/previous file, press 1 2.
To fast forward/reverse, press and hold
File compatibility
Music
•
•
This device only supports unprotected music
with the following file extension:
.mp3
2
3
4
Viewing video
1
2
Repeat steps 1 to 3 in “Listening to music”.
Press PHOTO/VIDEO to switch to
VIDEO mode.
Press 34 to select a video file.
Press OK to play.
To pause, press OK.To resume, press OK
again.
To display next/previous video file, press
once or more 1 2.
To fast forward/reverse, press and hold 2
.wma
Music bought from on-line music stores are
not supported because they are secured by
Digital Rights Management protection (DRM).
3
4
•
5
6
•
Picture
•
•
This device only supports picture file with the
following file extension:
.jpg
•
•
Before zoom
After zoom
•
•
or 1 until
6
or
5
appears on the lower- left
Video
corner of the screen, then press briefly and
repeatedly to select 5 different playback
speeds.To return to normal playback, press 2
This device only supports video file with the
following file:
MPEG4
2 or 1 until
6
or
5
appears on the lower-
left corner of the screen, then press briefly
and repeatedly to select 5 different playback
speeds.To return to normal playback, press 2
or 1 until displayed
6
or
5
is change to 2.
DivX
•
To repeat One/All, press once or more 4.
To cancel play mode, press 4 until “Off “is
displayed.
To switch between 16:9 and 4:3 screen
ratio, press once or more 3.
To select audio language, press and hold
3 (The feature is dependent on video file.)
To select subtitle language, press and
hold 4 (The feature is dependent on video
file.)
or 1 until displayed
6
or
5
is change to 2.
•
To repeat One,All or Shuffle, press once
or more 3\4.To cancel play mode, press
3\4 until “Off” is display.
•
•
•
Viewing photo
1
2
Repeat steps 1 to 3 in “Listening to music”.
Press PHOTO/VIDEO to switch to photo
mode.
➜The pictures stored on the USB device or
memory card will be displayed in
thumbnail.
Compatible USB device
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
USB device which requires driver installation
under Windows XP is not supported.
3
To display a picture in full screen, press 3 4
1 2 to select a thumbnail, then press OK.
•
Sleep / Illumination
Sleep
Setup menu
Using Setup menu options
The setup menu offers you advanced fea-
tures.
Automatically adjusting
To avoid strong light emitting from the unit at
night time, the auto dim function can be used
to adjust the brightness to the lowest level
automatically.
The clock radio has a built-in sleep timer,
which enables the set to automatically turn
off sound during radio or music playback
after a set period of time.
1
Press MENU.
➜The menu appears.
2
3
4
4
Press 1 2 to select “General”.
Press 3 4 to select an item.
Press 1 2 to select an option under the item.
After finishing the setting, press CLOCK,
TUNER, PHOTO/VIDEO or MUSIC to
exit the setup menu.
1
2
3
4
5
6
Press MENU.
Option 1:
Press 1 2 to highlight “General”.
Press 34 to select “Auto Dim Timer”.
Press 1 2 to select “On”.
Press 34 to select “Auto Dim - Start”.
Press 1 2 to select the time that auto dim
will start.
Press 34 to select “Auto Dim - End”.
Press 1 2 to select the time that auto dim
will end.
When auto dim is set, during auto dim time
span, the LCD brightness will be auto
adjusted to the lowest level. Press any
button to increase the brightness and it will
last 10 seconds.
1
2
Press TUNER.
Press SLEEP until your desired sleep option
is displayed.
➜Radio will turn on if radio was previously
turned off.
Setup
Language
Option
Français Deutsch Español
Description
Select a desired on screen display
language
7
8
English/
/
/
Option 2:
1
Press CLOCK or PHOTO/VIDEO to
enter respective mode.
Brightness
-3~3
Select a brightness value
•
Auto Dim Timer
Off/On
Turns on or off auto dim for LCD
brightness.
2
3
4
5
Press MENU.
Press 1 2 to highlight “General”.
Press 34 to select “Sleep Timer Music”.
Press 1 2 to select specific music you like.
➜The set will turn on with the music you
select.
Auto Dim - Start
Auto Dim - End
Wall Paper
21: 00
7: 00
Set the start time for auto dim
Set the end time for auto dim
Blue/Green/Red/Purple
Select different color for LCD
background
Using the stand
Option 3: using USB/Memory card
(SD/MMC)
The set is equipped with a stand on the
bottom panel.To set the set for a different
viewing angle take the stand out, then place it
back by reversing (see the figure below) the
side of the stand.
SleepTimer Music
Picture Display
3 music files are preset
Select one file for sleep function
1
2
Repeat steps 1-8 described in “Listening to
music”.
Press SLEEP until your desired sleep option
is displayed.
Slideshow mode/Browse mode
Sequential/Random
Select different mode to display picture
Select different slideshow sequence
Slideshow Sequence
*
Slideshow Effect
None/Random /16 effects available Select different slideshow effects
Select different slideshow intervals
5 Seconds/10 Seconds/ 30 Seconds/
1 Minute/ 5 Mintues/30 Minutes
1/ Hour/ 2 Hours
Slideshow Frequence
To deactivate sleep function
When sleep is activated,
is display.
•
•
Press SLEEP until “Off” is displayed.
Select picture display format
Wide screen/Normal
Display Format
File Information Display Off/On
Turns on or off file name display
Illumination brightness
The LCD brightness can be adjusted
manually and automatically.
Video Display
DivXVOD
PlaybackTime/RemainTime
Select different video time to be
displayed
Press OK to get DivX registration
code.
Manually adjusting
Press REPEAT ALARM / BRIGHTNESS
CONTROL once or more to cycle screen
brightness through 4 levels.
Press OK to restore to the factory
default settings.
Restore Default
settings
Reset
* =To turn on slideshow effect, you must select slideshow mode in “Picture Display”.
Safety and maintenance
Troubleshooting
•
•
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between
the ventilation holes and surrounding sur-
faces is necessary to prevent heat build-up.
The mechanical parts of the set contain
self-lubricating bearings and must not be
oiled or lubricated.
To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Safety and general
maintenance
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or
service center.
WARNING: Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
•
If you do not intend to use the clock radio
for a long time, withdraw the power cord
from the wall outlet.
•
•
Place the set on a hard and flat surface so
that the system does not tilt.
Where the MAINS plug or an appliance
coupler is used as the disconnect device, the
disconnect device shall remain readily
operable.
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
The apparatus shall not be exposed to drip-
ping or splashing
Do not expose the set, batteries, to humidity,
rain, sand or excessive heat caused by
heating equipment or direct sunlight.
No objects filled with liquids, such as vases,
shall be placed on the appartus.
•
No sound.
The screen brightness keeps turning dark.
•
– Volume not adjusted.
• Adjust theVOLUME.
– The set is in auto dim timing.
•
To let the screen keep bright, turn off auto dim
timer.
•
•
•
Occasional crackling sound during FM
broadcast.
Note:
When opening the folder of an external
device or its file stored in, read time may
exceed the normal time due to large
folder or file.
– Weak signal.
• Extend the pigtail antenna fully.
The alarm does not function.
– Alarm time is not set.
• See section on Setting and activating alarm.
– Alarm is not activated.
•
•
See section on Setting and activating alarm.
“No card is selected” is displayed on the
screen.
– A USB device or memory card (SD or MMC) is
not inserted.
INFORMATION REGARDING USB DIRECT:
1. Compatibility of the USB connection on this product:
a)This product supports most USB Mass storage devices (MSD) that these devices are compliant
to the USB MSD standards.
•
Insert a USB device or memory card (SD or
MMC).
i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" showing up on your computer after you have plugged the mass
storage device into your computer, most likely it is MSD compliant and it will work with this
product.
b) If your Mass storage device requires a battery/power source, please make sure you have a
fresh battery in it or charge the USB device first and then plug it into this product again.
2. Supported Music type:
a)This device only supports unprotected music with file extension: .mp3 .wma
b) Music bought from on-line music stores are not supported because they are secured by
Digital Rights Management protection (DRM).
c) File name extensions that ended with the following are not supported: .wav; .m4a; .m4p; .mp4;
.aac and etc.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
3. No Direct connection can be made from a Computer USB port to this product even you have
either or both mp3 or wma file in your computer.
|