Pelco Security Camera 207 User Manual

Release Notes  
Axis IP Cameras Supported on Digital Sentry  
Integral Digital Sentry® digital video management systems (DVMS) support certain  
Axis® IP camera models. The camera models listed in this document can be used with  
Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s  
table for information about the hardware and software features validated for use on a  
Digital Sentry system. Any general limitations or special instructions are listed at the  
beginning of the document, and any model-specific information is listed after each table.  
For information about the general usage of each camera, refer to the camera  
manufacturer’s documentation.  
A single AXIS driver in DSAdmin controls all supported AXIS cameras.  
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer  
to the Pelco Web site at www.pelco.com.  
AXIS 206, AXIS 207, AXIS 207W  
Firmware  
N/A  
Supported Resolutions  
Frames per Second (FPS)  
Number of Quality Settings  
Supported Codec  
640 x 480 maximum  
1 to 30  
10  
MJPEG  
Supported Motion Detection Integral, In-Camera  
Pan/Tilt/Zoom (PTZ)  
Not available  
C1002RN (1/09)  
Page 1 of 4  
 
AXIS 213 PTZ, AXIS 214 PTZ, AXIS 231D+, AXIS 232D+  
Firmware  
N/A  
Supported Resolutions  
FPS  
704 x 480 maximum  
1 to 30  
Number of Quality Settings  
Supported Codec  
10  
MJPEG, MPEG-4  
Supported Motion Detection Integral, In-Camera  
PTZ  
Yes  
AXIS 216FD  
Firmware  
N/A  
Supported Resolutions  
FPS  
640 x 480 maximum  
1 to 30  
Number of Quality Settings  
Supported Codec  
10  
MJPEG, MPEG-4  
Supported Motion Detection Integral  
PTZ  
Not available  
AXIS 223M  
Firmware  
4.41  
Supported Resolutions  
MJPEG: 1600 x 1200 maximum  
MPEG-4: 640 x 480 maximum  
FPS  
1 to 9  
Number of Quality Settings  
Supported Codec  
10  
MJPEG, MPEG-4  
Supported Motion Detection Integral, In-Camera  
PTZ  
Not available  
NOTES:  
• Camera quality settings in DSAdmin are not supported when using MPEG-4  
compression with AXIS 223M cameras.  
• Complex video scenes at high quality settings are not supported at  
1600 x 1200 resolution when using AXIS 223M cameras on Digital Sentry systems.  
C1002RN (1/09)  
Page 3 of 4  
 
AXIS 225FD  
Firmware  
N/A  
Supported Resolutions  
FPS  
640 x 480 maximum  
1 to 30  
Number of Quality Settings  
Supported Codec  
10  
MJPEG, MPEG-4  
Supported Motion Detection Integral, In-Camera  
PTZ  
Not available  
AXIS 233D  
Firmware  
4.40  
Supported Resolutions  
704 x 480, 704 x 240, 352 x 240,  
176 x 120  
FPS  
1 to 30  
Number of Quality Settings  
MJPEG: 11  
MPEG-4: 23  
Supported Codec  
MJPEG, MPEG-4  
Supported Motion Detection Integral, In-Camera  
PTZ  
Yes  
Contact Information  
Pelco Worldwide Headquarters  
3500 Pelco Way, Clovis, California 93612 USA  
USA & Canada: Tel: (800) 289-9100, Fax: (800) 289-9150  
International: Tel: +1(559) 292-1981, Fax: +1(559) 348-1120  
Document Revision History  
Document #  
Date  
Comments  
C1002RN  
1/09  
Original version.  
Pelco, the Pelco logo, and Digital Sentry are registered trademarks of Pelco, Inc.  
Axis is a registered trademark of Axis Communications.  
© Copyright 2009, Pelco, Inc. All rights reserved.  
Page 4 of 4  
C1002RN (1/09)  
 

Peavey Musical Instrument Electronics User Manual
Philips Answering Machine SS101P User Manual
Philips Baby Monitor SCD505 User Manual
Philips Digital Photo Frame GPIM 08 User Manual
Philips TV Cables SWV6370 User Manual
Philips TV DVD Combo 14PT6107G User Manual
Planar Car Video System PCT2485 User Manual
Polaroid Portable DVD Player PDV 0813A User Manual
POSIFLEX Business Machines Door KP 300 User Manual
Prince Castle Juicer CW Series User Manual