Pelco DVR C1690M 9 05 User Manual

DX8000 Series

Database File Patch

Update Instructions

C1690M (9/05)

Digital Video Recorder

DX8000

Figure 1. DX8000 Patch v1.0.0.3 Dialog Box

b. Click Next. The Software License Agreement dialog box opens.

Figure 2. Software License Agreement Dialog Box

c. Click Next. The Select Installation Folder dialog box opens.

Figure 3. Select Installation Folder Dialog Box

d. Click Next to accept the default. The installation process starts. The Installation Is Completed Successfully dialog box opens.

C1690M (9/05)

Figure 4. Installation Is Completed Successfully Dialog Box

e. Click Finished.

8. Remove the DX8000 Resource CD.

9. To restart the DX8000 system, do the following:

a. On the Windows task bar, click Start. The Start menu is displayed.

b. Click Shut Down. The Shut Down Windows dialog box opens.

c. In the drop-down box, select Restart.

d. Click OK. The DX8000 system restarts and is ready for operation.

You can perform an optional step to verify that the service update patch is correctly installed. For more information, refer to Optional:

e. Log into the DX8000.

OPTIONAL: VERIFYING THAT THE SERVICE UPDATE PATCH IS CORRECTLY INSTALLED

To verify that the service update patch is correct installed:

1. Log in as Admin.

2. From the DX8000 File menu, click Exit. The Shut Down dialog box opens.

3. In the drop-down selection box, select Exit to Windows.

4. Click OK.

5. Click Start > Settings > Control panel. The Control Panel window is displayed.

6. Double Click Add/Remove Programs. The Add/Remove Programs dialog box opens.

7. Verify that the service update titled “DX8000 Patch v1.0.00.3” is listed as a currently installed program.

8. Close all dialog boxes.

9. Click Start > Programs > DX8000 to start the DX8000 application. The DX8000 application window opens.

10. Log back into the DX8000 to resume its use.

Pelco Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com

USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150

International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120

Pelco and the Pelco logo are registered trademarks of Pelco.

Windows is a registered trademark of Microsoft Corporation.