P E A V E Y E L E C T R O N I C S
SpecS
pVM™ 46
FEATURES
•
•
•
•
Diamond-coated diaphragm
Neodymium magnetic design
Hypercardioid polar response
Smooth, accurate frequency
response
Diamond Series
Microphone
•
Ultra-high sensitivity
SpecificationS
DESCRIPTIOn
Diaphragm Type:
Diamond-coated
Thank you for choosing the Peavey
™
PVM 46 diamond-coated micro-
Element Type:
phone. The PVM 46 is a dynamic
hypercardioid incorporating a neodym-
ium magnet that has more than twice
the sensitivity of conventional micro-
phones, and with the diamond-coated
diaphragm, transient and frequency
response become flawless. The hyper-
cardioid polar response is one of the
most popular patterns in the industry
for micing instruments. The slightly
narrower on-axis polar pickup affords
the vocal user less bleed-over from
other instruments or vocals. The rear
reflection of the PVM 46 is typically
15 dB less sensitive than the on-axis
response. This helps to reduce feed-
back from stage monitors and back-
ground noise. The hypercardioid pat-
tern also makes micing easier when
trying to get a good sound on non-
electric instruments.
Dynamic
Magnet Composition:
Neodymium Iron Boron
Polar Pattern:
Hypercardioid
Front-to Back Rejection:
15 dB (typical)
Impedance:
400 ohms, balanced
Frequency Response:
45 Hz to 16 kHz
Sensitivity:
-51 dB (1 Pa = 94 dB SPL)
(Load = 2 KΩ)
Open Circuit Voltage:
-48.8 dB (1 Pa = 94 dB SPL)
The amorphous diamond-coated dia-
phragm is patented technology that
coats the diaphragm with a super-thin
layer of diamond that offers many
advantages over conventional laminat-
ing or other coating materials. Mainly,
it improves the stiffness of the large
diaphragm. In return, it keeps the dia-
phragm super stiff but ultra-light, which
is needed for extended high frequency
response and sharp crisp highs.
Maximum:
SPL 140 dB
Case (Housing):
Die-cast zinc
Finish:
Black rubberized paint
Pop Filter:
Dual integral open cell foam
Phasing:
The most significant advances in the
microphones industry have been made
through the utilization of high-tech
polymers. We are proud to say that we
are always at the forefront of this
Positive (inward) pressure on
diaphragm produces positive voltage at
Pin #2.
Weight:
9.92 oz. (281 grams)
industry by searching out and utilizing
Frequency Response
-40
-50
-60
-70
-80
-90
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
Figure 1
Polar pattern (5 dB per division)
0o
30o
-30o
250 Hz
500 Hz
1 KHz
60o
-60o
2 KHz
4.4 KHz
8 KHz
90o
-90o
10 KHz
12.5 KHz
Figure 2
Loudspeaker Placement
Figure 3
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305
©2011
Printed in the U.S.A. 1/11
80304764
|