Compliance
UL Recognized Component, 508c
Aries
Controller
Product Type . . . . . . . . . . . . . . . . . Aries AR-04CE, AR-08CE, and AR-13CE
Quick Reference Guide
Aries AR-04CE, AR-08CE, and AR-13CE Servo Drive/Controllers
The above equipment conforms with the protection requirements of Council Directive
89/336/EEC (EMC Directive) as amended by Directive 92/31/EEC on the approximation of the
laws of the Member States relating to Electromagnetic Compatibility when installed, operated,
and maintained as intended. Also, the above equipment conforms with the requirements of
Council Directive 73/23/EEC (Low Voltage Directive) as amended by 92/59/EEC, and CE
Marking Directive 93/68/EEC, provided the installation requirements described in the
Aries-ACR Drive/Controller Hardware Installation Guide are met, when installed, operated,
and maintained as intended.
Aries Controller
Customer PC
Ethernet Cable
In accordance with IEC 61800-3:1997 (adjustable-speed electrical power drive systems) this
product is of the restricted sales distribution class which meets the needs of an industrial
environment when installed as directed. However, further measures may need to be taken for
use of the product in a domestic environment.
Motor Feedback
Cable
The installation requirements are detailed in the Information supplied with the equipment. The
equipment is sold only to competent system builders.
Control Power
Cable
Safety Warning!
!
!
Motor Power
Mains Cable
High-performance motion control equipment is capable of producing rapid movement and
very high forces. Unexpected motion may occur especially during the development of controller
programs. KEEP WELL CLEAR of any machinery driven by servo motors. Never touch any part
of the equipment while it is in operation.
Motor
Cable
This product is sold as a motion control component to be installed in a complete system
using good engineering practice. Care must be taken to ensure that the product is installed and
used in a safe manner according to local safety laws and regulations. In particular, the product
must be positioned so that no part is accessible while power may be applied.
R-Clamp snugly
attached to braided
shield
Motor
This and other information from Parker Hannifin Corporation, its subsidiaries, and authorized
distributors provides product or system options for further investigation by users having tech-
nical expertise. Before you select or use any product or system, it is important that you analyze
all aspects of your application and review the information concerning the product in the current
product catalog. The user, through its own analysis and testing, is solely responsible for making
the final selection of the system and components and assuring that all performance, safety, and
warning requirements of the application are met.
Electromechanical Division
Parker Hannifin Corporation
p/n 88-028905-01A
Effective: October 2007
If the equipment is used in any manner that does not conform to the instructions given in this
user guide, then the protection provided by the equipment may be impaired.
|