®
Professional Disc Jockey Products
VHF High Frequency Wireless Microphone & Receiver Units
10. After microphone is turned on, the signal indicating
Features:
light of receiver will come on indicating that the
signal from the microphone has been received.
11. Rotate the volume knob on the receiver to the
desired volume to use the Microphone.
12. Adjust output volume of the hand free transmitter to obtain
good sound without distortion.
•
•
•
This product is a professionally designed wireless
microphone and receiver system that can be operated in
conjunction with DJ, Singer, Karaoke or Public Speaker.
A quartz crystal oscillator is used for the circuits of this
product thus making the frequency stable without shifting
and receiving outward interference.
Models are available for either handheld, headset, or
lavaliere microphone options
Please record the serial number of your unit as well as the
name of the dealer from whom you purchased the unit. Retain
this information with your receipt for your records. Please
return the warranty card enclosed to register your microphone
with us.
Equipment options:
WS-31 series: This system consists of a rack mountable, table
top high frequency one channel non-diversity receiver, one
wireless microphone, one 1/4” - 1/4” mic cable, and power
supply for the receiver.
MODEL: WS-
SERIAL NUMBER:
PURCHASED FROM:
DATE OF PURCHASE:
WS-32 series: This system consists of a rack mountable, table
top high frequency two channel non-diversity receiver, two
wireless microphones, one 1/4” - 1/4” mic cable, and a power
supply for the receiver.
Precautions:
WS-33 series: This system consists of a rack mountable, table
top high frequency one channel true-diversity receiver, one
wireless microphone, one 1/4” - 1/4” mic cable, and power
supply for the receiver.
A. Load the battery in accordance with the drawing attached to the
battery compartment in the microphone.
B. If the microphone is not in use, please turn off the switch of the
microphone and remove the battery. Also turn off the receiver,
and unplug it.
C. After the microphone has been used for a period of time, the
indicating light at the bottom of the microphone will come on
indicating that the battery has been exhausted and change of
battery is necessary.
D. For operation, always turn on the power for the receiver first,
then turn on the power for the microphone, and then bring up
the level on your mixing console. After operation, bring down the
level on your mixer then turn off the power for the microphone
and turn off the power for the receiver.
E. As this system has been subjected to precision calibration prior
to factory delivery, do not open for adjustment, as this will void
the warranty. Please return to an authorized Numark repair site
for all necessary repairs.
WS-RK Rack mount kit: Available separately, this 1 space
rack mount kit allows 2 receivers to be mounted next to each
other.
Operating Instruction:
1. Remove receiver from packaging.
2. Attach receiver to (WS-RK) rack mount kit if desired,
available separately.
3. Extend antennae for reception
4. With the unit off, hook up the power supply to the
receiver of this system and plug it into an
appropriate outlet.
5. Hook up the microphone cable from the output of the
receiver to the microphone input on your mixer or
recording device.
6. Turn the switch ON and the power indicating light
will come on indicating that power is on.
7. Install the battery(s) in the transmitter. For handheld
microphones, turn and open the base section of
microphone and load in 9V battery. For the hands
free models open the transmitter battery door and
install battery(s).
8. For hands free models, plug in microphone into the
jack on the top of the transmitter.
9. Turn on the switch of microphone and the indicating
light will flash once indicating that the microphone is
turned ON. If the battery indication light is on this
means the battery needs to be replaced.
Specifications:
RECEIVERS:
CARRIER FREQUENCY: 170 – 210 MHz VHF BAND
CHANNEL: WS-31 SINGLE CHANNEL NON-DIVERSITY
WS-32 DUAL CHANNEL NON-DIVERSITY
WS-33 SINGLE CHANNEL DIVERSITY
QUIETING SENSITIVITY (S/N=30Db, THD=3%)
S/N RATIO AT 1mV INPUT: 60 dB
UNBALANCE OUTPUT LEVEL: -44dB (MIC) -14dB (LINE)
BALANCE OUTPUT LEVEL (WS-33only): -44dB (MIC) -14dB (LINE)
THD(1KHz, 10KHzDEV, 1Mv): 0.5%
FREQUENCY DRIFT: +/- 50KHz
POWER REQUIREMENT: DC12V/200mA
|